It looks like this TDS540D can be upgraded to the colour TDS754D! www.eevblog.com/forum/repair/conversion-tektronix-tds500-to-tds700-color-oscilloscope/

@Daveyk021

5 жыл бұрын

EEVblog please fix the crt properly

@ChipGuy

5 жыл бұрын

I have seen CRT to TFT conversion kits for these on Ebay. They also advertised "convert your mono scope to a color scope". Maybe you can try one of those. And of course there is a thread from2012 on your forum: www.eevblog.com/forum/testgear/color-tft-screen-in-a-tektronix-tds500-600-or-700/

@izimsi

5 жыл бұрын

Just what I thought when I've seen it's actually capable of displaying color.

@nobby91010

5 жыл бұрын

cor blimey you"l av 2 do it that way then lol

@gblargg

5 жыл бұрын

Of course a color CRT has inferior resolution due to the color triads.

Fix it ! If not possible go to plan B and replace CRT w/ LCD. By any means, make it work again. it's a wonderfull piece of engineering art.

@mycosys

5 жыл бұрын

Honestly the CRT isnt worth fixing unless you are a CRT nut, UHT, xrays - its not something most people want to do anymore, and the improvement of an LCD in terms of power and simplicity and reliability are real

@mycosys

5 жыл бұрын

@@Psyden5757 A scope that deep is pretty much always going to be a CRO - the depth is there mainly to allow for the length of a CRT

@autogolazzojr7950

5 жыл бұрын

@@mycosys A digital crt oscilloscope with have a shorter crt with magnetic deflection.

@mycosys

5 жыл бұрын

@@autogolazzojr7950 which doesnt change the fact that if its that long its almost certainly a CRT. Im sure someone also tried a side tube

@FooBar89

3 жыл бұрын

there are superior modern alternatives, not sure it’s worth fixing by any means

Wish I had dumpsters around here with things like that in it *sighs* Edit: You've gota go for the retrofit of a color LCD panel for that..... Just look at that surface mount porn on the main board !!!

@DrakkarCalethiel

5 жыл бұрын

Richard Wayman I wish I could get anything. 10 years ago you could get everything. From microwaves to old PCs. Best score was the P3 machine. Works awesome as a DOS retro gaming machine.

@mbirth

5 жыл бұрын

Just beware that there are cheap ass LCD kits that use the VGA port on the back and there are the more "pro" models that convert the internal signal used for the CRT so you can still use the external port. E.g. simmconnlabscom.ipage.com/store/page5.html Also on my TDS784D, colour is made by using a colour lcd in front of the CRT. It works similar to the colour wheel in DLP projectors or the Vectrex 3D Imager.

@cthulpiss

5 жыл бұрын

@@mbirth " colour lcd in front of the CRT " ? wow! how does it compare to regular lcd?

@VK2GPU

5 жыл бұрын

Same! Best I've found dumpster diving is some still good vegetables. Not any mostly functional scopes :(

@mbirth

5 жыл бұрын

@@cthulpiss A bit blurry, because the graphics come from the CRT and the LCD only adds the colour. But better contrast. Someone made a comparison video: kzread.info/dash/bejne/fpV_m6-CidCceps.html .

Fix the monitor !!! Keep it original...

Id definitely do a Memory dump of those Dallas battery-backed RAM chips before those built in batterys die and you loose potentially important stuff like config/calibration data and your left with a brick... those things are notorious

@sbalogh53

5 жыл бұрын

I also wonder what the floppy is used for. Just storage of waveform data? Or can you download optional measurement systems? I have a HP Data Analyzer with a floppy disk drive and you could load in all sorts of measurement techniques for the device. It also booted up using a floppy containing the basic OS and "apps". Probably no longer works since the device is about 35 years old.

First of all, this problem is hidden somewhere near the horizontal (HV) transformer, which is also used as a power supply for anode voltage, fillament and horizontal deflection coil. Measuring anode voltage is difficult, but it's easy to check the fillament voltage (use TrueRMS voltmeter). If it is lower than expected (use screen's datasheet as reference), then you are sure, that the HV transformer works improperly (for some reason). The second thing you should do, is disconnect the horizontal deflection coil (load the deflection coil output with approx 30-40Ω non-inductive power resistor, which is enough to not to destroy the HV transformer by inducted voltage on non-loaded output) and measure the fillament voltage again. If it is correct, then your problem is some shortage inside horizontal deflection coil. If it is still low, then the deflection coil is probably OK. Next check the horizontal amplifier. First of all. Disconnect the PSU from the horizontal amplifier and check the PSU voltage. If it is low, then your problem is not inside the monitor part, but it's somewhere inside power supply unit. If it is OK, then reconnect the PSU to the horizontal amplifier and measure the PSU voltage again. If the voltage is low, then the PSU is overloaded. If not, then your horizontal amplifier have lower gain than expected. If the PSU is overloaded, then check the compensation capacitor connected in parallel to the primary winding of the HV transformer. Desolder the capacitor and measure it. If it is OK, do not solder it back and remove also the HV transformer and check, if your PSU is still overloaded. Yes means that the horizontal amplifier failed. No means, that you should check, if you have some DC on the horizontal amplifier output. If there is DC, it means, that horizontal amplifier failed. If not, then it is near sure, that the HV transformer failed (winding shortage in most cases). If the PSU is not overloaded and is working properly, then the problem still could be caused by the compensating capacitor, HV transformer or horizontal amplifier. So. Check the compensating capacitor (which is easy to do), then replace the horizontal amplifier (which is cheaper than a HV transformer) and then the HV transformer. Short version: Check if the horizontal deflection coils are OK (as described before). Then check the PSU voltage. If it is low, then desolder horizontal amplifier. If it is still low, then repair the PSU. If not, then check the compensating capacitor. If it is OK, then replace the horizontal amplifier. If it is still not working, then replace the HV transformer. Easy :3 :3 In my opinion, this is caused by PSU or by the compensating capacitor.

A systematic CRT debug/repair video would be cool. Techniques for probing high voltage circuitry and really anything that helps youngsters to play with high voltage should be encouraged.

cap on the horizontal section is the culprit. you have low HV and it can be also seen by the narrow horizontal deflection

The complexity in these scopes is unbelievable! Nice video.

Repair incomming? If it isn't fixable retrofit a LCD.

Fix it fix it fix it fix it.

That's not a dumpster, it's bloody heaven. Unbelievable what you fish out on a regular basis. Fix the thing :-)

Oh no! That's the scope I sold on ebay last month! Guess the buyer wasn't happy with it. The TDS640A was my first scope. I 'upgraded' to a 740(?) which is a color version since and that's the scope I use now. For a budget scope, it's very nice.

@LittleRainGames

5 жыл бұрын

Small world lol

@JasonWW2000

5 жыл бұрын

I'm sure he was joking.

@basshead.

5 жыл бұрын

Not a bad four banger scope.

@mr_gerber

5 жыл бұрын

Four banger?

@basshead.

5 жыл бұрын

+DGerber It has 4 channels.

I'm so envious of your dumpster finds. Good show. Also, repair or if not possible, refit with LCD.

Fix the original crt! I have a 360 from the same era and really do appreciate the sharp quickness of crt over an lcd.

When I go into CNC cabinets from yesteryear, sometimes I see LCD retrofits, they look amazing.

look at that little, old-school flyback! awesome vid once again dave

Fix the display, remove the hard drive, replace the batteries, and replace the floppy with an IDE to SD card device.

My first 500mhz scope was an eBay TDS754D and really liked it. A bit massive by modern standards, but it got me through a ton of design work.

It's not unusual for those Dallas clock/NVRAM chips to last upwards of 20 years before they start loosing time. I had one on my Tandy 1000HX that only finally died a few years ago. There's a hack you can do where you dremel out the potted connections to the old batteries and solder in connections to a button cell holder and get them keeping time again.

@Daytona574

5 жыл бұрын

Commonly needed on IBM PS/2s as well. www.mcamafia.de/mcapage0/dsrework.htm

@Daytona574

5 жыл бұрын

A BR1225 holder, while uncommon, aligns perfectly with those pins. Done a few myself.

Run SPC (Signal Path Compensation) - that's where the wheels usually fall off. Also - you can double the b/w and sample rate on these. Simple matter of removing shunt caps and changing the 0-ohm jumpers. It's a 2M unit, which is nice - extended sample memory. The 21V regulator on the CRT board is probably gone - easy fix. Pretty much the entire CRT board runs off the output of the 21V regulator on the board, and it is a common failure point. Flybacks also tend to die, but parts/assemblies are available on eBay. I have a bunch of these beauties - fix up the CRT driver board for starters, then extend the bandwidth & sample rate.

what a crazy board inside!

Always go for a bit of encapsulated postscript (EPS), muh-dude. It'll do all the half-tone screening for when you send your Quark file to the litho printers for your >printed I believe you can get colour screen kits for the old TDS 'scopes, btw.

Would definitely make a cool repair video. Though it might be tricky given you can't really have it turned on and have access to LCD at same time to troubleshoot and probe etc. I like the idea of retrofitting a small LCD if you can have one that will take a x/y input like a CRT.

This is a soldering defect of a horizontal (flyback) transformer. Turn on the device and bring the neon lamp with the (flyback) transformer

@GLITCH_-.-

5 жыл бұрын

What exactly does " bring the neon lamp with the (flyback) transformer" mean?

@Tedybear315

5 жыл бұрын

@@GLITCH_-.- I think if you bring a neon probe close to the flyback and it's working? The neon lamp will glow. If the neon lamp fails to even give a hint at lighting up, possible a cold solder joint at the flyback transformer. Just a guess, but I've seen a large number of flyback transformers with cold solder joints/cracked joints create many problems on the equipment where I work.

@SoundzRite

5 жыл бұрын

Back in the day, I had aTDS520A that went dark like this. It had no CRT anode voltage. I found a replacement flyback somewhere that fixed the problem. Got a few more years out of it before the surface mount electrolytics went south. A common problem on these. I didn't see any on this D model top board. Check the other side of the analog board. If Tek had fixed the problem, it may be worth salvaging.

@EEVblog

5 жыл бұрын

Can't be the flyback, as there is something on screen, just collapsed or some such.

@TehMG

5 жыл бұрын

@@EEVblog The flyback transformer and horizontal deflection circuitry actually have a lot in common! Quite often the same transistor or IC drives both. So a problem with either part of this circuit can affect the flyback and/or horizontal deflection.

Your the Man to fix it Dave, it would make a great video!

Go-to the utilities menu and turn up the intensity on the display. Try it...

I think I will move to Australia to become a dumpster diver...I would like to see a coloujr LCD on that scope... Nice !

The lcd replacement is a nice project!

I used the same scope in my last job for ~12 years, it was the 1 GHz version, color display. It never gave me any trouble, and the Anti-Glare screen was great (I can see the Purple tint in the video, so it looks like the B/W version gets it too).

I sold an model model of this on eBay last year. It have a triangle wave input on all channels and was going though the service manual procedure, all going fine, had to stop for an emergency, came back next day to carry on and it was dead as a dodo! Very similar in construction inside!

I have the TDS 520B and it sometimes gets cranky. The repair consists of popping it apart, and reseating the plugs, which seems to fix it for a few more years. The CRT is monochrome, and most of the video on the VGA out is too, except for when I toggle the InstaVu function, it turns color on VGA output. If I could convert it to color I might be tempted to try that conversion you mentioned!

Again, from the magic dumpster!

@16:50 can always put the bigger part in, but then to the right there is the same part with no space for the larger variant? Maybe the larger part does double duty?

Others have suggested the flyback transformer, which might be the case. I'd also look at the horizontal output transistor. They usually are the ones that have the magic smoke escaping first. Lacking that the solid state option looks like the best option. You need to make sure that the aspect ratio is OK as well. Good luck.

Retrofit with the colour LCD. Will be a nice upgrade to it. Wish I had dumpsters with this kind of stuff!

The Schaffner interests me more than the scope. They made such oddball specialized gear, it's a lot of fun to see what's lurking inside. :)

If you have a CRT restorer, you can quickly check for emission to see if its really stuffed or ok and clean the guns (s). I have an old B&K 467 and love it and fixed so many arcade units and my own oscilloscopes crts ect. Then if thats ok at least you know its not the crt. I agree to try and fix the crt as it could just be something simple like that ribbon connector. Everything looks strangely clean and caps all look perfect. Its a gift that it has a lcd output as you can get a nice screen and put it in and bodge up the holder surround to look nice; but thats just details. You might find it all goes together easily and will be fresh and modern. At least you have the backup option except for the slow lcd result compared to a fast bright crt. You scored big time and as you Americans say "awesome" , but i dont know what we say in Australia!!...

I spent a while hunting for 5xx and 7xx series scopes like this on eBay a while back. There are a lot of them for sale with modifications such as color CRT's (As far as I understand, it's a simple mod to enable full color support on *any* of the scope versions), or with pre-installed color LCD replacements. So it must be quite simple to do, given that it's a popular mod. Also I've seen a number of them being sold with higher bandwidth - it seems that they all have basically the same hardware, and that a simple mod can unlock 1GHs on the 500Mhz version etc. The reliability was terrible for the A/B/C versions, they had leaking capacitors that would permanently ruin the PCB's, very hard to repair in most cases. Apparently the D versions fixed this, and is pretty much safe in that regard. This is just from what I heard while researching them though, I don't have any personal experience with them. Nice scopes for the price if you want bandwidth, and can live with the lack of modern features. I ended up getting an Agilent / HP 54642D myself instead, but I was close to getting one of the 7xxD series Tek scopes!

Hey I have one of those! The only bad caps that I could find were in the CRT module. After fixing those everything works great!

@EEVblog

5 жыл бұрын

Which caps?

@MrBurritoMan

5 жыл бұрын

@@EEVblog I don't remember exactly which ones, just remember that it was almost all the electrolytic needed to be replaced. It looked like mine were from the same batch.

@SupremeRuleroftheWorld

5 жыл бұрын

@@EEVblog the faulty ones i guess.

@Tedybear315

5 жыл бұрын

24:10 paused the screen. I didn't see any bulging or looking suspect. Can you be more specific?

@MrBurritoMan

5 жыл бұрын

@@Tedybear315 Bad electrolytic capacitors can fail and have zero outward signs that they are bad. You need to pick up (or build) an ESR meter. With that you can measure the effective series resistance of the capacitor to tell if it has failed open, or failed shut. Every electrolytic capacitor will have an ESR, measured in the tens to hundreds of ohms. A good ESR meter, behind a solid multi-meter, is one of the best pieces of test equipment you can buy.

Hi Dave, I'm a Java programmer since about 2000 so this is really cool. It's good to see the original Java logo right on the scope. You ask when they stopped using Java on scopes. Gosh, I didn't even know they started using it. Cheers from Canada :-)

That RTC has done well!

Shout out for the Zip drive storage :)

I'd like to see you troubleshoot and determine the exact cause of fault with the CRT assembly. Mainly to see what I can learn from the process.

Quite a dumpster find! That would upgrade my bench scope for sure even if I had to run an ext monitor. Fix it if you can or replace the crt with an lcd.

From the picture when you had a display on the CRT it looked like H scan problem, the left hand side was cramped into the middle. It should be relatively easy to run the CRT module outside the chassis.

There are quite a few LCD retrofitted TDS oscilloscopes at my work and they end up being far clearer than their CRT counterparts.

Boy, you must have some really great dumpsters where you live? I have never known anyone to get so lucky looking in dumpsters and finding lab equipment.

Three upgrades: 1. LCD. 2. A Noctua 24V industrial-grade fan (can be quieter.) 3. Flash-based hard drive replacement (SD2SCSI or CF card, for example.)

Gotta like that screw and pull out method

You scored! I bought a salesman's 2 channel TDS380 demo in 1998 for $4300! because I needed a scope with storage for a unique design I was troubleshooting. My scope is like new but worth just a few dollars on the market. Your TDS540 must have cost many more dollars than the 380. I wish the 380 had upgradable memory. I bought a TDS3054 with 4 color channels but it also has very low storage memory.

I think a LCD replacement would be interesting.

I could be some Electrolytic caps Dave I would try fixing it first it might be a easy repair if it's to costly you can always use the LCD

install a new tft lcd. I bet there plenty that could work with minimal hacks using serial to parallel conversion. A quick hack with a fast analog front end, an FPGA or fast DSP, and a TFT LCD of 640x480 to 800x600 or so resolution. Sounds like a fun project for someone.

I have a TDS340A 100 MHz in perfect condition. Monochrome CRT (green), very useful. Would love to have a 4-channel like that one too.

Please try to fix it! And if it turns out to be "impossible" then try fitting an LCD inside, please. Either way, I always learn something from your videos!

It shows some images, so flyback transformer seems to be fine. Alignment seems wrong, i don't think issues with internal crt video DAC, but i would try to check H-V coils driver, driver voltages and capacitors, expecially those near heatsinks on crt section. On 4:30 it seems to be same screen of 7:03 with much less luminance (check anode voltage) and horizontal deflection issues (check horizontal driver and relative voltages).

I'd be down for either one of those videos

Convert to color AND upgrade it to lcd. Bonus style points if you manage to add a touchscreen and map the buttons over.

Seeing the neck of the CRT, I thought it looked cloudy, like the tube has lost vacuum. You see some deflection on the tube. It looks really weak, but who knows.

On the front panel there is a button (Display) press it then on bottom on the front panel 1 button over from the left side of the scope it says Intensity on the screen press that and turn the selector knob to the right and see if the screen comes up... (Cheers)

It is good idea to fix it, it will remind me old good days of fixing CRT TV's. I am about of buying one of this scopes.

You have the best dumpsters down under..

I like mine but it did not come from a dumpster. I didn't pay a lot for it but still it was not free! An LCD conversion would be worth a watch.

Angle grinder, Dremel and a file will take care of the moulded crt tube housing.

Unless it's a faulty EHV transformer it's easily fixable. It could be an interesting repair video for sure

Whee! I’ve got Zip, Jazz, and Syquest drives… We were *desperate* for large scale modular storage back in the 90s as publishing and imaging went digital...

Definitely repair the CRT if it's just a line/field output transistor problem. I suspect field because I can vaguely see a raster. Normally the line provides all the high voltages through the LOPT kind of like a switch-mode. Also it could be from the USA and the field set to 60Hz. If it's Australian then it needs -50Hz, minus because of the upside down southern hemisphere thing.

The internal battery must have been OK as the date on first power up was correct! I'd live with that scope running through a small VGA LCD. Fix it. Replace the HDD with an SSD, just for fun, of course?

I actually really like this scope. I have the very first edition - the 540 (no A, B, C or D). This is the one "you don't buy" given it's notorious capacitor problems. I also carry spare parts (namely the acquisition board, "knowing" it's going to fail. Weirdly it hasn't, it's passes POST all the time (phew), and the spares are still spare. I really needed a cheap scope. I give it a clean up with isopropyl now and again, but hey in Europe it's almost impossible to get a half decent scope for less than $100, So I took a risk. Love it.

You don't need ramdacs for a mono display. This suggests to me that you could get colour on the VGA if you can convince the firmware it's a colour model.

I swear you throw this crap in the dumpster only to "find it" and depress all of us. Cheers from the US!

I'd like to see you diagnose the issue and possibly install an LCD display

Your dumpster is worth more then my house.

@gblargg

5 жыл бұрын

One man's trash is another man's mansion.

@packratswhatif.3990

5 жыл бұрын

With the luck that Dave has in these trash bins, I am going to get him to buy me some Lotto tickets.

Man, the dumpsters where you live have such great stuff. The dumpster around the corner from me is full of garbage. Although I do find quite a few TV's in the alleys around here.

Very nice.. I'm a bit jealous.

Surely the crt driver board is fixable! Looks like something in the horizontal driver section is failing causing low hv and low horizontal deflection

Агрегат конечно уникальный..

QUERY/QUESTION.... Am I correct in saying that you cannot access those pots like focus and such in that CRT section unless it is together? That seems very odd. How alignment and focus?

I feel like every EEVBlog upload these days is #1184

You should (at least try to) fix it, and if it is impossible to do so, consider retrofitting a LCD (or any other type of) display in it's place. Also, is it possible to just get a solid-core wire with the right diameter to just push into that connector on the newly found Schaffner module? I know it isn't the safest option or the easiest one (you can propably attach aligator-clips to the wires attached to the socket on the inside of the unit, and run it without it's top/bottom cover on), but is it possible? small note: I think that the video number is wrong (shouldn't it be 1185?)

A dim CRT from what I remember with PC monitors tis was usually related to the flyback/driver circuit. Something that old though too I would almost wonder if maybe wear tear/ age did not cause damage to the CRT tube and maybe the vacuum escaped. Original in a way is nice, but i would say just update it to an LCD.

I think a CRT is pretty much a vacuum tube: get Mr. Carlson to weigh in :-)

@Stoney3K

5 жыл бұрын

Carlson may have one or two of these units as spare frames, so if you give him a poke, he may be able to provide you with a spare working CRT...

@jonka1

5 жыл бұрын

Very unlikely it's the crt that's faulty. Wishfull thinking to just plug in a repair. The power supply for the tube is very high voltage and the components are highly stressed.

@Stoney3K

5 жыл бұрын

@@jonka1 I'd just replace the entire monitor assembly including the driver board as a complete unit and be done with it, that would give you the chance to drop in a color tube as well.

Try to repair first. LCD screens are not as clear as the old school CRTs. Although I suppose if you can get a nice OLED display or similar, it might be worth changing over. I am so jealous of your dumpster finds. All I ever find are old wrappers and food scraps in dumpsters I find.

If you can get the colour to work go for the upgrade but would also be interesting to see what’s wrong with the crt...

For sure fix the stock crt

3:14 Yes I remember the shuttered colour screens, they made me feel quite unwell.

@shana_dmr

5 жыл бұрын

Yeah, I never really understood using them in Tek high end scopes, they were big and weighted a ton anyway so why not go with normal color CRT?

Ah, yeah, I've got a TDS744A under my desk I got from my first "real" job with a power supply fault (now fixed, dead switching transistor), pretty nice kit for its age.

LCD replacement would make a great vid or even repair CRT

I think a repair video would be nice. If that fails then go for the replacement screen.

+1 upgrade to color LCD. The performance of the scope warrants it and the cost-to-date is just right.

Хороший аппарат :) Нравится.

I've fiexe a pair of old Tek LCD backlights by accessing the display board and replacing the electrolytic caps. I removed the caps, measured them with an impedance bridge finding most were low in capacitance and high in dissipation. Swapping in new caps solved the problem. GIve it a try! (I've also fixed several LDC monitors with the same low-tech process)

@nrdesign1991

5 жыл бұрын

This is not a n LCD

@CarlVanWormerAE7GD

5 жыл бұрын

Oops! CRT not LCD . . . my bad . . . but my LCD fixes did work . . .

Repair would be awesome to see, replacement would just be adding a VGA monitor connected to the VGA port, nothing more to add to it

I would love to see an attempted repair with the plan to replace the CRT with an LCD panel if the repair fails.

You have it too good Dave...

verify b+ on the CRT and check the capacitors on the CRT board

Iomega zip drives, we just stopped using them so I remember well :)

28:40 - I vote for a CRT fix - You've never done one of those!

Magic dumpster, Dave, Magic dumpster.