Just watched this episode and Edd had to install the front fog lights, just as I was thinking what are the 'pipes' were for, he explained. Top bloke.

You always respect your listener. Air suspension has always fascinated me. Job done. I get it!

Bring back EDD. Need him back. he's the best

The satnav on this episode was brillant: "scamper down the old frog and toad when you reach the roundabout you've gone peep Tong take the main road to the big smoke and your be back in no merry line 😂😂

Great mechanic!!!

Nice job

Mechanic genius!

Edd you are wonderful machnic 👌👌

You don't need a ramp to do the anti roll bar bushes or the drop links (normally do together as the drop links tend to go first), put the suspension up as high as it will go with the front either on drive up ramps as long as they are flat and undo the bolts, as long as the vehicle is flat and evenly loaded its easy. However you need to have the boot open or pull the EAS fuses so it won't drop, and put axle stands under the chassis (not the axle) to be double sure, wheels chocked, in park hand brake on and key not in the ignition. You can service loads of a P38 without a lift if you are careful , including changing the air springs if you really have to.

Edd love you always

BRING BACK EDD, Ant will never be a replacement

Make Edd the WD mechanic again and I'll watch WD again.

@robben896

3 жыл бұрын

Simple

Awsome!

I was really enjoying that until the nasty surprise at 7:40

@alext9067

5 жыл бұрын

Chris Wales What's the issue? You lost me.

@Chriswales

5 жыл бұрын

@@alext9067 That's a relief since I don't like being followed.

@alext9067

5 жыл бұрын

@@Chriswales Are you talking about the new guy, Ant? I hated to see Edd go. He was great. Explained everything. And here's a strange thing. Great Britain seems to have about 900 times the cool custom and parts shops as the US. You'd think, since the US is larger, that it'd have so many more. Nope. GB has got specialty shops all over the place. I saw the episode on banding wheels and out of curiosity, checked the US. I found 5 places. What? I thought we like car gurus. Nope. Anyway, the show got bought and moved to Calif and the company said it couldn't afford to do the show like it was made in GB. What? Do you remember the first couple of seasons? It must have cost a whole dollar to produce. Well the Americans can't do anything without throwing a load-o-dough at it and must have had about 500 assistants on the fucking payroll, so Edd said fuck you and have a nice day. My personal opinion is that Ant smiles too much and I miss Edd's way of detailing all the little stuff. And he wasn't a windbag either. Why am I preaching to the choir? You know all this. Have a good day. I seriously thought of moving to GB for that reason. PS, I used to work in television and it's filled with no-talent backsliding donut eaters. I think I got physically ill some days because of the stupidity. I know from whence Edd comes.

@KI-of9vo

3 жыл бұрын

The voice of Brewer

Ed p38 wizard 🧙‍♂️

I haven’t seen you stuck for an answer or technical issue. However, I have an problem an you have a challenge with my P38 (1996, RHD, 4.6 HSE). I need to replace the battery. The bonnet release mechanism failed to open on driver’s side. Tried pulling both, separately and together., still driver side locked. Q. How can I get the lever to ‘unlock’? StuartH

Ed I’m from Cyprus and I just bought a Range Rover 2005 and I have air suspension inactive but the light on the button is in middle but I doesn’t goes up or down , please help me what to do 🙏

I'm surprised ed didn't just change the seal on the piston.

@shehetheir8382

3 жыл бұрын

Freaking known it someone will ask this kind of question.

@Mrcaffinebean

2 жыл бұрын

Me too, rebuild kits are $20 lol

loving the top edd. Liking bollywood i see.

Nice nice 😍

my air suspension switch light gos out when i drive off and the air suspension stops warking help??

Hello Sir. I would like to ask you if you know a solution to my problem with my Range Rover Sport L320 4.2 because I got the error code P0087 and P0088. I got problem starting the car and suspect thé fuel pump. Could you please guide me ? Best Dennis

If there is one mechanic i would blindy give my RR P38 to it would be Edd China.

I sure miss Edd and Mike together doing their thing.

Can you do one on classic with a ticking engine......or just borrow mine 😏😉

Ya maybe you are right , why do they need Brewer ? He only started the show and provides all his knowledge in bringing in the right cars for Edd or Ant to repair. Maybe it's his personality you don't like or his high charged antics. Both Edd or Ant are both gifted mechanics . It's one of the top car shows on TV.

If it were mine, I'd just adapt any old aftermarket 12-volt compressor that has the capacity, such as an offroad air compressor. Might have to re-route and extend the wiring/hoses, but you could end up with a much better quality of compressor?

@charlesseymour1482

4 жыл бұрын

That is exactly why Edd China is doing the show. Stay original where massive improvements are not available. Like switching drum to disk on back axels of any modern car. The Landy air pump is fine 2nd hand the middle path. Yeah Edd China!

@jonathandalton2921

3 жыл бұрын

the problem isnt the better quality compressor , its the range rover computer and sensors, it knows what voltage and capacity the old one was , the new one has to then be programmed into the ecu otherwise the whole computer gives errors, they quite finicky.

@TheGojodfrey

3 жыл бұрын

@@jonathandalton2921 the air supply is irrelevant, the EAS ECU is dumb to the details of what is actually pumping air. The compressor is fed through a relay in the fuse box, but has an overheat sensor that the ECU can read, apart from that you could use anything that'll provide 130psi. I've had three and currently still own two of them, once you work out how it works it's pretty simple

@johnkeane5641

2 жыл бұрын

Boring

Bring back Ed.

where can i find the whole episode instead of the short version?

@castiger1957

4 жыл бұрын

Check out Quest on Freeview there are 2 or 3 series running throughout the day it will turn up eventually, you can find the Series and episode numbers on Wikipedia.

Hello Edd,you its great master😁😁😁😁😁😁in folow you trasmition,you its nunber,1 the king off the Word🍻🍻🍻👏👏🍻🍻🏆🏆🏆

Cabelo legal!

Norm knows everything.

makes no sense to get a second hand part when you know its going to have a worn ring, why not just replace the ring once you had the compressor apart?

@shehetheir8382

3 жыл бұрын

These kinds of small rubber parts are really hard to find, it might take them a whole day, a whole month to find, comparing to 55 dollars to swap the entire unit, the labour cost on finding that rubber seal most of the time are way more costly than 55 dollars.

@Mrcaffinebean

2 жыл бұрын

@@shehetheir8382 they are $20 online

Never put polly bushes on a p38 that handle like crap

I miss the old wheeler dealers....

Why not bypass the air ride with coil over springs and shocks with a kit from suncoreindustries.com in Florida USA

@Tbss77

5 жыл бұрын

Chris Lemaster nah

@TheGojodfrey

3 жыл бұрын

@@Tbss77 yep, the ride is awful and you end up speedboating with a heavy trailer. If you do fit progressive springs for towing the rear ride and noise is then terrible.

Ratings are probably worse than expected so they decided to try and make some revenue by uploading videos with Edd in them on youtube? Oh well, glad I’m using AdBlock.

@starbar1958

5 жыл бұрын

There's no ads on these....

Since we had a car turn up on the back of a trailer. Why do so many people say that! The car is on the trailer... it’s not just sat on the back of it.

"polly" bushes? Oh yes please.

Why does everyone here hate Ant? He's every bit as competent as Master China, just different type of personality. He really bought me with bumper and exhaust fabrication from the scratch. It's Brewer who spoils every episode, esp. since he started doing smaller interventions on cars (interior, few screws here and there...). Really kills this show.

@janjanssen3136

5 жыл бұрын

Because this is TV. Edd is way more a personality then Ant.

@ParanoidAndroid90

5 жыл бұрын

Fortunately The Brewer has always got limited screen time but yes he is popping up more and more these last few series. He has always ruined the show. We need Ant and Edd to team up and do their own show.

@Anonymous-yy9ut

5 жыл бұрын

Because ant is not right for this show and with the way they film it it appears as though somebody else unbolts it and he removes it

My P38 was an absolute pos. Two weeks wouldn't go by without needing a trip to the dealer for repairs.

In all honesty when I get a P38 in the future (unlikely) but I plan to just rip out the air suspension and spring mod it

This Video was good morning coffee viewing, until That tool shows up at the end. Almost managed a good WD vid till Mike Brewer turned up. I've hated him since he decided to spray paint a 205 parcel shelf to make it look like a GTi one. Sodding cheapskate.

@lee2217

4 жыл бұрын

sarnieken it’s on a budget why pay over the odds for a parcel shelf?

don't replace edd but replace mike

Ant does a much better job in For The Love Of Cars in Wheeler Dealers it is like he is trying to hard to be like Mike Mike and Edd worked much better together Time in the garage working on cars is about 15 minutes less then the time in earlier episodes

renting out spaces with car lifting is a great idea. I have no such service in my country. I shall do it myself and be a respected buisnessmann

The Refurb kit is only £25

10 Quid an hour? Have to drive 100KM and pay $70 an hour in Canada :/

Id do them on back on drive in 5min nevermind 70quid labour and the need for a ramp to do so. Even mike could do them in 5min

I don't know if they have drug dealers in the UK, but if they do, i'd imagine they'd drive these. Especially with that tint.

Instead of replacing the air compressor with a used unit, which may or may not have (or soon to have) problems, why not just replace the seal and cylinder parts for $30?

Bring back full episodes this short are annoying

These cars seem simple to me?

Could have fixed the pump for a lot less!

Don’t use Boulevard Motors aka WestLondonMotorCompany aka BD Car sales Ltd aka BD Car Sals Ltd aka Ali and Sons Ltd aka Horsenden Motors in Perivale London.

Fuck got a new wheeler dealers and before this, utter SHIT

screw Mike....Edd and Ant together...

those poly bushings will make a ton of noise for the buyer of that car. never put poly bushings on a car you are selling......really man?

@danielmarshall4587

5 жыл бұрын

Fair enough..... Oh wait a moment, put a fat exhaust on it to cover the extra noise of the bushes.

@daverhodes382

5 жыл бұрын

m.j t Poppycock.

@rimmersbryggeri

5 жыл бұрын

Not so much on the anti roll bar bushings .

@TheGojodfrey

3 жыл бұрын

On an anti roll bar it makes little difference, however anywhere else and yes it'll be noisier and harsher. I put them on one and took them off the next weekend, it degraded driving something akin to a Cherokee, waste of money

@leenevin8451

Жыл бұрын

I always use polys for ARB

Just replace with regular suspension

Ant is actually way better as a mechanic than Ed. Sorry to say this