Nicely done!

Thanks for this. Could you do a video on the Lelit Mara X?

What kind of water treatment / filtration does this machine require. Is a Brita filter good enough?

Does steaming affect the temperature of the water in the thermosyphon?

Thanks

Whats in the bag,........?

@GATABITES

5 жыл бұрын

i thought the same thing.

@mijnnaamisaaron

3 жыл бұрын

Tracy's head is in the bag

Would you be able 2 do some pre-infusion on this machine, if you do, 4 how long???

@clivecoffee

5 жыл бұрын

Hey Roel, the Classika isn't capable of pre-infusion. In order to pre-infuse, the E61 group head on the Classika requires water line pressure. Since it runs on an internal reservoir there is no line pressure. If you have any other questions let us know!

I have one nozzle on the frothing wand blocked - are you able to remove the end of the nozzle to clean?

@clivecoffee

Жыл бұрын

Yep! - You should be able to unscrew the nozzle. If it doesn't come off easy, then try using a microfiber towel and a wrench to remove it.

what temperature should milk be steamed at?

@clivecoffee

5 жыл бұрын

In large part it comes down to personal preference but generally, anywhere between 120°F and 160°F is acceptable. Above 160°F you start to run the risk of "burning" the milk which will result in negative flavors. - Charles

After completing the espresso, how long do you have to wait for the boiler to get to steam temperature please?

@clivecoffee

3 жыл бұрын

Hi there! Switching from brewing to steaming mode takes about a minute in total. Let us know if there's anything else we can help with!

@Michelsen3K

7 ай бұрын

30secs.

Does a rotary pump provide a more even and consistent water flow than a vibration pump or is it just quieter?

@clivecoffee

7 ай бұрын

Yes, to both.

Why does this machine power off (abruptly so) when the water refill tank is below a certain level whilst the boiler is basically full? Is the boiler only for steaming and irrelevant in case you draws Espressi only?

@knipsi22

2 ай бұрын

It's protecting the pump from running dry. Boiler is for both Espresso and steam

Please let me know what exactly the pump switch is used for?

@clivecoffee

2 жыл бұрын

The pump switch is used to fill the boilers. Turn this on when switching between steam mode and brew mode to refill.

@JakeBarnes12

Жыл бұрын

@@clivecoffee But Tim in the video (Tip 4) advises NOT to use the pump switch when switching between steam and brew mode because water or air may be trapped in the line. Instead his tip is simply to open the group head and steam wand until water flows through both, indicating that the boiler is refilled.

when switching from espresso to steam mode how long do i purge my steam wand? i’ve watched a few videos and they are different. one said 5 second purge and 20 seconds waiting repeat 3 times. others say 5 seconds purge. is it just the 3 times for first use or every use? thanks

@clivecoffee

3 күн бұрын

you're ready to steam once you purge water and the steam wand begins to make steam!

How do you turn on the shot timer. Mine doesn’t display when pulling a shot.

@clivecoffee

Жыл бұрын

It definitely should! This is something we may be able to help troubleshoot! Please reach out to our team at support@clivecoffee.com

ok so after steaming turn off steam switch and purge steam wand and keep portafilter in there to purge like 20 seconds (until water running). then ready for next shot?

@clivecoffee

Ай бұрын

sure thing!

@danielleramos9686

4 күн бұрын

thanks! ok wait. i just rewatched the video… to switch from steam back to espresso. pull steam wand and brew switch until water is running freely. then ready for espresso again?

@clivecoffee

3 күн бұрын

@@danielleramos9686 You can simply switch out of steam mode and lift the brew lever up all the way until water comes through the grouphead as well.

What would happen if i just steam milk on the same temperature i brew espresso? I’m hoping it would saves me the time to temp heat up

@clivecoffee

6 ай бұрын

The results won't be good.

Does anyone have any issue with the steam wand dripping water? Even when I have the PID up to temp at 138 Celsius in steam mode, the steam is still pretty wet and the wand drips a fair bit.

@clivecoffee

Жыл бұрын

The steam on the Classika is generally pretty wet, so this makes sense. The boiler has a limited capacity in which to create steam.

@Michelsen3K

7 ай бұрын

Yeah i confirm it takes some time until dry steam is availabe.

Is there really no vacuum breaker on the boiler?

@clivecoffee

Жыл бұрын

Correct. This is because the Classika, and other single-boiler machines like it do not have a dedicated steam boiler.

I milk first, espresso second because I believe there is more time the other way

0:06 - 0:08 Wtf?

Brother your website is trolling customers. Silvia 700 +!!??? Really? Ecm clasicca? 1500+? Really? Thief way above retail value.

@gilbwaaa1923

6 жыл бұрын

Check other sites. Retail changes with euro. www.seattlecoffeegear.com/rancilio-silvia-espresso-machine-version-m - retail used to be ~695.00 www.wholelattelove.com/ecm-classika-pid used to be ~1299.00