*Coming up on having had this saw for a year....am a casual user and bought it to cut up sections for bowl blanks. Easy to start, **Bestfor.Garden** also recommend even after storage for a couple of months. Simple chain tension adjustment. Just cut up some 20" Osage Orange, including ripping bolts in half (at an angle). Like butter!*

I was running this saw for about 2 hours at about a 30-50% duty cycle kzread.infoUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and it did a great job. I used the lever for the built in sharpener to clear chip buildup out more than to actually sharpen the chain. It managed to cut some hardwood stumps much larger than it's size without bothering the neighbors with hours of 2 stroke noise.

Echo products START quick, never had one that took more then '3' pulls. Their products are great/ & dependable.

I have owned my CS-590 for over 5 years. It's a great saw. It starts easy, idles real well, and cuts fast! I have run mine harder, than any, I have owned before. I do keep it up, clean, well oiled, and stored right when put up for months! But, that's what it takes for them to be ready when you need it to run hard again. A fine saw. It's getting heavier as I turn 68, but it eats everything you put in front of it. You have to allow some things! The compression release is nice, it makes pulling the rope easy, for the bigger engine in this saw. If you have big trees to work over...this is the saw. I have spent lots more money for a lot less (name brand) saw in my time. ECHO makes a great bunch of two-stroke powered equipment. I have owned a full spread of them for 20 years, and still going strong.

@r-luvbham6608

4 жыл бұрын

I'm thinking about getting a 590 myself but I seen a review where someone said that they Oiler Port keep getting clogged up and they had to clean it regularly have you had that problem

@williamdavis3128

2 жыл бұрын

I haven't had any problems with the poker on my 590 getting clogged

Stumbled across an old videos of your's bro... congrats on 100k.

I have this saw and would add that the choke issue you mentioned is actually a benefit in my experience. Number one it's not really in the way and number two if it was more flush with the case it would be much harder to manipulate when wearing thick/heavy gloves. So for me I like the fact there is that much material to get ahold of when wearing a pair of heavy gloves or with dirty oily etc. hands where grip is limited.

By far the best saw that $399 can buy!

@acureone987

3 жыл бұрын

Agreed!

@Milfmilker-gd6gm

3 жыл бұрын

Obviously the best chainsaw brand is stihl then it’s Husqvarna and then it’s echo echoes are really good for the money the more you pay for a chainsaw the better it will be if you stick to these three brands

@Deltathegoldenretriever

3 жыл бұрын

I got mine for $210 and very impressed!!

@seanm8478

3 жыл бұрын

@@Deltathegoldenretriever where in the heck did you pick it up that cheap????

@thomasdavenport508

2 жыл бұрын

@@seanm8478 prolly used at the pawn shop although, I've never seen one used for sale. You're not gonna see mine used at the pawn shop. You can see it in my hand, used to slay trees and make big sticks into little sticks. 🎄

Just bought this saw! This is very well done! Love your videos human!

I like the fact he is demo'ng a well used saw.

Bought one last month and it is a beast. Great review and you covered all the points that sold me on this model.

Not going to lie, I am very partial to Stihl but I must say that 590 was quite impressive. Good price, looks like a good built saw, cuts pretty damn nice. Not too bad at all!

@mjmtreeservicemaintenance2940

3 жыл бұрын

@@TheDennys21 all I run is Stihl in my tree removal company. I have my 029 Super that is 25 years old and still cutting and it isn't a pro saw.

@TheDennys21

3 жыл бұрын

@@mjmtreeservicemaintenance2940 you can't compare old saws with the new, the old ones were built to last while the new ones are not.

@bigd9260

2 жыл бұрын

Same here. I have a friend with the 590.... and honestly I dont really have anything bad to say about it. Its probably the best saw in that price range. Good firewood saw, is it good for a tree company to use everyday...... not sure.

@jonnysnipes3123

Жыл бұрын

@@TheDennys21 the new higher priced saw will last forever like the 7310p you should be able to pass that down your family tree. The 590 won’t tho

Old Video, BUT I bought one of these recently, With my Veteran's discount $360.00 at Home Depot, this is a LOT of saw for the $$ with a 5 year consumer warranty, I own 5 other saws including Stihl and Husky pro saws. time will tell but this saw has some guts for sure!!

@dentondunn4346

2 жыл бұрын

How did the Echo compare to your other saws, is it your go to saw now

Echo equipment ROCKS!

Powerful saw..Got mine last month..We generally cut Mesquite and Oak on the ranch..Only alteration on mine is I had the opportunity to get a Stihl Chain ..

I got one as a back up to tackle harvesting all the Blackjack and Post Oaks on my property and it makes short work of two of natures hardest trees to fell and limb.

My CS-310 has been great, just picked up a CS-590 new in box on FB, can't wait to try it.

The days when Human didn’t look and talk like he’s bat shit crazy lol

The choke plunger is designed that way, I imagine, so that it can be manipulated with gloves on.

@thomasdavenport508

2 жыл бұрын

Works for me. Never in the way. Always functions correctly. For 2.5 yrs of solid use from the tree tops to the root ball.

@KickapooNinja

2 жыл бұрын

I was about to say the same thing

@tinhinnh

Ай бұрын

still couldve been more flushed even with gloves

@kimoclyde

Ай бұрын

​@@tinhinnhOpen it up. It can probably be modified to be shorter.

I love my timerwolf. I use it for falling and bucking the trunks, the 490 is used for limbing and bucking smaller trees.

I just started mine after it sat all winter. Didn’t change the gas at all. I popped open the fuel cap to vent it, added chain oil, and it started in 4 pulls.

Absolutely love my Echo Timberwolf. Cut with guys who have the other big brands and all are always impressed with the work the 590 does. I'm pretty much asked to cut all the big stuff since I'm faster that guys with saws that cost hundreds more. Now I have a Husky 372xp as my other saw, and its slightly faster (should be as it's 10 cc more and $400 higher MSRP) but if I was a homeowner or weekend firewood warrior, I wouldn't hesitate at all about buying this saw.

I’m gonna pick up this saw today , was highly recommended to me to replace my Stihl that I sold yesterday , slowly switching out all my Stihl equipment to echo

I love this chainsaw is very pretty

Been subbed forever and had this saw for four years. How am I just seeing this. Love my saw. Muffler mod and caps removed make it RUN. Also have the 310 with the same mods. It’s ape season in three pulls

@thewibb

4 жыл бұрын

Same here. I have the 590 and the 352 with muffler mods and caps removed. Both are cutting machines, especially once broke in and tuned well! 352 always starts in 2-3 pulls. The 590 is a bit more, but starts quick.

@MrBaggedIntegra619

4 жыл бұрын

thewibb how do you mod the 352

@joescott803

4 жыл бұрын

@@thewibb I'm confident I can run a 30" bar with my 590

I've owned one of these for a little over 2 years, and use it almost weekly . Great saw, but a few observations; If I flush cut stumps, and it spends extended time on its side, and I stop it o take a break, that thing will not re-start at all ---sometimes for the rest of the day. If she stays upright, no worries, even in 90 percent humidity and above. The chain adjustment pin just snapped off and was replaced under warranty by the dealer, but the replacement looks different . It does have tons of power and destroys all the hardwood we have here, including an 80 year old black walnut, most recently . Anti-vibe is good, but no quite up to Husq or Stihl. That's nitpicky, I know! Overall, the best 400 dollar saw out there, in my humble opinion.

@obfuscated3090

6 жыл бұрын

Mine does that shit too. It can't be anything but a carb design defect.

@mcmsmt06

5 жыл бұрын

I have had the exact same thing happen with a Stihl MS 390 after flush-cutting a stump. I shut it off, and it would not restart.

@PartTimeYooper

5 жыл бұрын

Happens with mine. Two things: Never choke if its warm. (I'm guessing you are not) But that will definitely flood it. Second is if mine is hot and been run on its side, I'll start it by running with throttle wide open. Feel like most saws don't need this these days but its helped with refiring my saws after "those" kinda cuts. PS...I usually make those guys with the whimpy little saws do the stump cutting while the big boy bucks the rest...

@supporterofsanity

5 жыл бұрын

Jerry Counts I know this is an old post but I learned to loosen the fuel cap on my 590 to release pressure build up before I tried to start the saw after it sets in the sun. Maybe that trick will Work in side cutting situation?

@kenneth6731

5 жыл бұрын

Next time let it idle for 30 seconds on the ground before you cut it off.

Just ordered one(CS-590) I am replacing a DCS 520 that I can not get parts for. Would you recommend doing the muffler mod and removing the carb adjustment limiters. Thanks 👍

Great saw! I wonder how the cs620 would compare to this. See if you can get ahold of one Human. That would be cool.

I am German American I drive Japanese cars not German cars. My first 2002 Subaru Outback gave me 409,000 miles. My second 2002 Subaru Outback has 189,000 miles and is alive and VERY well. After all, a car is just a machine and it is only as good, as far as it goes and as much as it costs. I run Japanese chainsaws too. The Echo CS 590 Timberwolf is a machine and it is the best deal in chainsaws on the market. Period bar none. I got mine for $320 out the door brand spanking new from a Echo dealer. If you are arguing otherwise you are stuck in a ethnocentric world. Unless you have extra cash to throw away, then get out of your ethnocentric world and you will be a lot happier. This pretty much says it like it should be said.

@thatlookslikeanasteroid1926

5 жыл бұрын

I am Irish New Zealander and I think your Echo has a carb issue as mentioned in this thread

@johnb.6468

2 жыл бұрын

Gay

We had a small Echo back in the early 80s...83. Its considered a vintage saw now.it has almost a similar layout right down to the steel on/off switch..the choke was a black pullout round switch. Was considered a techy little saw back then. Its been a good saw just a prick to start. Good to see the new generation coming through now. Japanese engineering should make it a good saw.

What's your personal opinion on this saw, does the saw feel as robust as the stihl brand of saws and do you think it will last long term?

just picked one up today, needed a backup because my Husqvarna Rancher 450 is still waiting for parts, this saw definitely has some balls for sure, thank you for your input nice video.

@dentondunn4346

2 жыл бұрын

How's it compare to the 450 Rancher cause I'm trying to pick one between the 2. The 450 Rancher is $439 new in my area but isn't the echoes cheaper in price

@williamdavis3128

2 жыл бұрын

I have a husqvarna and a echo 590 I like but saws and have used them quite hard I will say I like the echo it has a lot more torque and alot less vibration and starts easier

@blakevanness

2 жыл бұрын

@@dentondunn4346 not sure what you went with, but I had a 455 rancher, bought an Echo 590 for a cheap spare saw and it rips through everything like butter and never gets bogged down. Tons of torque. For the money, there's nothing that competes. My 455 rancher collects dust now.

@dentondunn4346

2 жыл бұрын

@@blakevanness I started with a 271 farm boss and it wouldn't start and idle correctly straight from the dealership and before I used it I returned it 3x and they couldn't get it fixed so I returned it and bought the Echo CS590 Timberwolf and really liked it. It cuts anything I put it in and it's a torque monster

Going to pick mine up Friday 😃

the engine didn't seem to Bog hardly at all. must have pretty good torque.

Would it pull a 24" bar/chain thru hardwood? I have a cs400 that doesn't do terrible with hardwood (goes thru pine like butter relatively speaking) but I need something bigger. If you watch my 35 second vid you'll see what I'm dealing with...the 400 is slowly getting it done but I'm now leaning towards binding a chain or two around the bottom 7ft or so of the tree and dropping it whole (minus the one big limb and one individual trunk I've already removed).

I've used Echo for about 6 years, brilliant units, no problems with them, i use stihl, shindaiwa also, don't ever knock the Shindaiwa, that's echo in a red colour but cheaper, very reliable & strong in cutting...Stihl are brilliant & tough with a lot of power also...never worry with just the main brands, go with a variety..you'll save & get the job done with cheaper/reliable/ strong saws

@Human1337

7 жыл бұрын

Absolutely, each of those brands have some damn fine products. For me, service and support are the big factors with what I buy. Also, I know how to fix stihl, recently learned with the Husqvarna T540 that learning to repair other brands can be a bit of a pain when you're used to something being designed a certain way.

@steppoffaith8426

6 жыл бұрын

Shindawa are blue also and are no different than dolmar. Which is the third best production saw. And serviceability is huge point human. Lots of sthil models interchange likewise with husky.

best saw out there right now for only $400 bucks...This saw will run shoulder to shoulder with ANY 60cc saw out there

@steppoffaith8426

6 жыл бұрын

mojo jojo your out of mind.

@ryy597

5 жыл бұрын

mojo jojo im selling my ms390 to buy one, tired of stihl

@zombiefighterof1987

5 жыл бұрын

No way it can run shoulder to shoulder with an MS362 or 560/562XP

@ryy597

5 жыл бұрын

Erik C you would be supprised, they’re very underated saws

@hotfungaffo5193

5 жыл бұрын

100 percent agree. Used one and litterlly was like holy crap it has serious go go juice. Liked it better then the sthil. Crazy

Im thinking of building a garage log cabin style becouse i have the wood on the property an this would be great to preap the logs with

Cool camera angle for the cuts

Great video!

The reviews by those that bought them at home depot are top notch. I use a system of 4 and 5 star ratio to 1 star and I believe it was like 12-1. My blue Max is 6-1 the poulon is like 3-1 like the inferior husky. The Husky 455 and 460 at Lowes ratios are top notch while their 435 down to 240 are so similar to poulon. Alternatives in the low priced field is the Ryobi 37cc 14-16 inch and the Remingtons 18-20. My next 20 inch homeowner deal will be in this order Husky 455, echo590 or another Blue Max 52 cc.

@dentondunn4346

2 жыл бұрын

You would choose a 455 Rancher over the Echo CS590

How well does the decompression valve work? I would have liked to see you do a cold-start. I have an old CS-660EVL that's getting really hard to find parts for, and it has no chain brake. Would like to get a new saw almost as big, safer, and that doesn't try to jerk my arm off or mess up my elbow every time I try to start it. (I would get the 590 with the 18" bar, and the 20" bar and chains from my old saw would also fit it.)

@williamdavis3128

2 жыл бұрын

The decompression valve works really well on my 590 cold start one pull at full choke then one pull with choke off and it's good to go

Have you reviewed the 2511? Light one? Can’t find u on here review?

I would like to see a TRUE Cold start. Can you tell me about your experience?

Just picked one up from home depot on clearence (no box) only $250, cant wait to try it out

@jamessammann9183

5 жыл бұрын

It's awesome I do trees have used for years none better for 399$

@billwilson3665

5 жыл бұрын

You ol dog you.

I've got about 5 or 6 Stihl chainsaws and I just got that one a while back and it's my pic of all of them that's an aggressive saw

@jamesnm21

6 жыл бұрын

Jimmy Hagar have it ported and get even more out of it. We've got one and you basically can't stop that thing.

Hi Human, what is your idea of a decent chain for this saw ? I am cutting firewood and removing the odd tree ? I am located in Australia, so something that can be found in e bay would be great. Cheers !

@Human1337

5 жыл бұрын

I've tried a few, and always go back to stihl chains, they stretch noticeably less than the others I've tried.

Go on Human, make the Echo part of your family, variety is the spice of life.

If you can get it started, it's a great saw. Perhaps mine has some tuning issues? Looking at getting in the two saw plan, the 590 is a monster for smaller limb work.

@user-fc8gl2gy9p

5 ай бұрын

Sale buena como sthil?

Aaaawwww, what a nice young man.

I wish echo would put a 90cc class saw in the box stores.

Only negative thing I see wrong with it is the bar nuts look awful small on it but other than that no complaints. Any issues with that?

so its like 2.9kw and why is that spec so much hidden?

I have two great Stihls and the Echo 620PW, which is similar in every way to this one except the wrap-around handle. However, I come across the same problem as Alex Matthews had below with chain tensioning until I did two things: (1) locked down the nuts tighter than they should be, and (2) switch to Stihl chains, which for some reason don't seem to stretch as much under the heat of a long cut. However, I still can't figure out how to safely remove the top cover to access other parts. I removed every screw I could find and it still wouldn't let go! ha.

@Human1337

7 жыл бұрын

Not sure about the top cover, and don't have it available any longer to find out for you. On the chains though, the stihl chains are pre-stretched, so they do hold shape better than others that aren't. Though of those, I've only run the oregon, but the difference was noticeable, I was having to tighten up the chain way to damn much.

@noquedaniuno

7 жыл бұрын

there is a screw just before the filter cover on the left. Check it out

@victorgriffin1289

5 жыл бұрын

If you can't keep your chain tight, you're not putting enough oil on it.

Thoughts on the Echo 620?

Hello Human Me again. Re CS-590 I know it comes standard with either an 18" or a 20" bar and a 20" I do want I think plus a small length bar - so could you also put a 16" or enen a 14" bar on this saw? For a two bar option. if no - why not? I understand why you can't go too big but what is the problem in going smaller if any?

@Human1337

7 жыл бұрын

I'm honestly not sure, this was the only time I got to play with any echo saws, don't know much about them.

@Calibir1

7 жыл бұрын

Human thank you. I sent word that you can put a 16 inch bar on the 590. I saw where it showed that the range of bars is from 16 to 24 inch but are sold with either 18 or 20 inch. thanks again

@johnme7049

6 жыл бұрын

Calibir1 Check with Echo but my CS 400 will take a 16 to 20. Personally I think 20" is too much for it but I'm happy with the 18 It came with. 4 years of fairly hard use and still fires on the 2ed pul and starts on the 3rd. Every frickin time!

@jamessammann9183

5 жыл бұрын

It comes with a 20. U can get a 18 and 24 bar

Good demonstration. Do you think there would be much difference in the 590 and the 620p, the pro model of this saw. Such as power, longer life, etc..? Thanks for the demonstration!!

@Human1337

5 жыл бұрын

All of the above

What size file do I need for sharpening?

Do you know why a chainsaw bar would smoke as if it’s on fire? Was cutting a and it simply started smoking like crazy.

Got a couple bars that say Echo timber wolf

which is the better one??

I cut big oak and it's a beast

What size bar did this have? Trying to decide between 20 and 24”

@Saw_Squatch

4 жыл бұрын

If I were you and you have any use for a longer bar I'd get the 24" bar with the saw then get an aftermarket 20" bar set up for a 72dl chain instead of echo's 70dl 20" setup, it'll be way easier to find chain

Do a Makita/Dolmar review

Should I trade my ms461r for this?? My neighbor really has been on me about it... But I have an MS362cm that is getting the hotsaws101 treatment... so maybe bye bye 461?

@thatlookslikeanasteroid1926

5 жыл бұрын

no...tell ya neighbor to mind his own fuckin business

Thank u for video

Man you do some good vids, what one is better the ECHO CS-590 or the Stihl MS271, respect you opinion.

@Human1337

6 жыл бұрын

Been quite awhile since I used either, couldn't really say.

@DerekChavez11

6 жыл бұрын

I have the 271, My buddy has the CS590. Both are awesome saws but for some reason he wishes he had my STIHL.. Starts easier according to him and also less vibration. I have a chisel chain I believe and it shreds thru wood like no other. No hesitations whatsoever! Go STIHL..

@anthonyfields4234

3 жыл бұрын

Had the ms271 and returned it. Engine reciprocated too slowly when compared to my ms260. The 271 also just didn't inspire me as it's just a farm saw. Bought a ms261c-m which I haven't broken in yet but, looks promising though. Just ordered the cs590 so I'll update later. Still miss my old cs400 !

@dentondunn4346

2 жыл бұрын

I just sold my 271 Farm Boss that I bought last October and it's a very good saw. Started good and had a lot of torque, I loved using it. It cut pretty good. Think my next new saw will be the Echo CS590 though, it cuts faster from the comparison videos I've watched and costs $40 less with the 5yr warranty where Stihl has 1 or 2 yr extended warranty. For the price of $400 it beats both the Farm Boss & the Rancher in price, horse power, and warranty too. Can't beat it I don't think

@jengafet5893

2 жыл бұрын

@@anthonyfields4234 how you liking the cs 590? Looking to pick one up soon

Now try the Echo cs-620p vs stihl 362c vs Husqvarna 562xp All equal pro saws and I believe Echo comes out on top. Also on Echo dealer day the echo is $518. Out the door where still and husky are about $800.

Human I commented on your stihl ms261cm video recently. Considering a stihl ms311 ms391 ms261cm or ms362cm. I’ve always been a stihl guy when it comes to chainsaws. But man a new stihl chainsaw cost a PREMIUM! How does this cs590 Timberwolf OR the cs620p echo compare to a stihl?? I know they cost less as does some Husqvarna’s.

@Human1337

6 жыл бұрын

They're pretty decent, very comparable to an ms 271. Don't know about the echo though, never ran one.

@jew0182

6 жыл бұрын

Human my wife an I happened to be in Home Depot this evening and they had a echo 590 Timberwolf. Looked like a pretty well made saw. Had some metal(magnesium) in a few places, like some pro saws. Overall it looked like a nice package especially for 399. How is this echo 590 Timberwolf classified as?? Pro Sumer I guess???

@jew0182

6 жыл бұрын

Man the other thing I keep looking at is that 261 stihl 4.0 hp out of a 50cc and 10.8 lbs WOW that 261cm must flat out be a screamer. Been then I about the old adage “there’s no replacement for displacement” 50cc vs some other these other pro Sumer saws 55-60cc. Makes deciding on a saw harder than it should be!

@Human1337

6 жыл бұрын

lol, I know the feeling.

I really like Echo. They might not cut as fast as the other big names but are they ever reliable! I personally don't care if it takes a second or even two longer to cut a log.

I know this is an old vid but if anyone finds this while looking for saw options the choke is not an issue. WHat is annoying though is the on off switch when you are wearing bigger gloves. You can easily accidentally turn this saw off when operating. That is annoying, however, this is a great saw, easy to start, very fast cutter and if you are a landowner you will most likely find yourself just forgoing all other saws and running this one even for little stuff.

Their is a guy in CL selling a used one for $300 not sure if that’s a lot or not .

my neighbor has a cs590 for sale 150$.lightly used. i already have 3, 60cc saws should i get it for a back up to the back ups?

@hk93shooter

3 жыл бұрын

@James Wadsworth o i grabbed it. sharpened the chain and cleaned her up. just like new.

@oldmanfred8676

3 жыл бұрын

@@hk93shooter, You stole that Chainsaw!

@hk93shooter

3 жыл бұрын

@@oldmanfred8676 this makes number 13. my wife is not a fan. lol.

@oldmanfred8676

3 жыл бұрын

@@hk93shooter, Women don’t understand Chainsaw addiction!

@oldmanfred8676

3 жыл бұрын

Men do!

I have the same saw cuts great !! But they need to upgrade the handles from plastic to aluminum . The plastic breaks way too easy lol

@nathangreve2453

6 жыл бұрын

Tyson James the 600 and 620p handles fit the 590. Same fit. Go for it

Try the 620 you will really be impressed.

@AATreeService

6 жыл бұрын

Yup sweet unit there

@jamessammann9183

5 жыл бұрын

What is the 620 is it bigger

Have this saw. Highly recommended, beats the crap out of my Stihl.

@94SexyStang

5 жыл бұрын

uhhh NO.....dead wrong....stihl is a REAL pro grade saw.....period.

@tannerdns9048

5 жыл бұрын

Mike Fu you know stihl makes non pro grade saws too, right?

@tjlovesrachel

5 жыл бұрын

84guerciotti what stihl are you talking about?

@dentondunn4346

2 жыл бұрын

You recommend the Echo CS590 over the 271 Farm Boss?

Will this saw cut down a tree ?

Thank you for your reviews and hope your body feels as best as it ever has while heavily intoxicated Human 😉

Would u buy sthil over this echo

You look like the toughest man in Letterkenny.

Have a 14" homelite (yes, garbage). Buying either Stihl farm boss or Echo CS 590. My garage is full of echo products. 75% leaning towards echo saw. What do you think. From my extensive research, they are comparable in reliability. Echo has longer warranty. Stihl is very temperamental - especially if you mix and match elevations when using saw (home versus camp). Comparable in price. Echo stock chain is more aggressive. Echo easier to adjust/maintain. Echo comparable motor CC greater than Stihl as it relates to price.

@Human1337

8 жыл бұрын

After running both, I'd say it's one of those things that comes down to a color preference. They're both great saws, each one has something that the other doesn't, but nothing that is a deal breaker on either end. I'm personally a bit more fond of stihl than echo, but that's due to reasons that aren't significant enough for me to recommend one over the other. Honestly, either way you go, I think you'll be pleased, both great saws.

@noquedaniuno

7 жыл бұрын

For me it went down to price on the parts. Ask around and you'll see

@bpryan422

7 жыл бұрын

CallmeMAck I ended up with the Echo Timberwolf CS 590, WOW. My father in law, father, and all my uncles have Stihls. Let's just say they were incredibly impressed and I had to do all the dropping and large cuts. I even hit barb wire in the middle of the tree (yes pretty shitty), half my teeth missing and still powered through it. What an amazing saw

@noquedaniuno

7 жыл бұрын

Ryan Grant I am distributor of that brand and it is something else entirely when you sell something that actually gets the job done and in such fashion. I'm glad that your choice actually worked in your favor

What is the after-sales backup like with Echo?

@Human1337

7 жыл бұрын

Not familiar with that term, is that a synonym for warranty?

@noquedaniuno

7 жыл бұрын

well, out of experience this machines won't need much parts after a year of use.

@Rick_Sanchez_C137_

6 жыл бұрын

Only FIVE YEAR WARRANTY in the industry..... ECHO!

what's the difference in hp between this saw and their 620p with the same displacement?

@adamevans4824

6 жыл бұрын

Mike Salter the 590 and the 620 are different in their ignition coil, carb, dual bucking spikes, aluminum handle, and the 620 is higher compression

@nathangreve2453

6 жыл бұрын

The 620 has %15 more power than the 590. The 590 is a tweak down version of the 600p.

I have the same chainsaw. the chain often loosens for no reason. I tighten it but when it works it relaxes again. The chainsaw is newer.

@dentondunn4346

2 жыл бұрын

Probably the small bar nuts, that's the only flaw I see with this saw that no one talks about. Husqvarna uses 13mm bolts where the Sthil uses 17mm, idk what size the Echo is but they're small looking and was curious if it causes any problems because I'm considering buying the Echo CS590 myself over the 271 Farm Boss and 450 Rancher

@williamdavis3128

2 жыл бұрын

I haven't had any problems with the chain getting slack for no reason

@dentondunn4346

2 жыл бұрын

@@williamdavis3128 I Bought the Timberwolf and love it. Getting the muffler modded and tuned soon. Be a screamer then for sure. Starts easy and never bogs through a cut

Really liking my CS490, I'm sure the 590 is equally as good. The 490 really woke up after I did a muffler mod and retuned the carb. Waiting for Echo to release a high performance 70cc class saw... maybe 2020 is the year.

Where do you get parts?

@Human1337

7 жыл бұрын

I go to www.artslawnmowershop.com/ as it's really close to the house, but you can go to any servicing dealer and they should be able to help you out.

I have a CS-341 top handle that's a great little climbing saw, light and easy to start. Not a fan of their larger units. I don't care for the toggle kill switch and the hokie choke setup. She's a pretty stout looking unit from your video though.

@HiLineTree

4 жыл бұрын

Nothing hokie about a quality toggle switch vs a piece of spring tin rubbing on a spade terminal that you find in s Stihl. Simple and dependable choke. What the hell is hokie about that? Saw expert’s extraordinaire 😆

Do a Makita review.

Can you review the cs 352?

@militarycutlawnservices7804

4 жыл бұрын

I have the cs352, 590 and 271t. My 352 is in my landscape trailer at all times. It’s great for quick odd cutting jobs. On large tree/ log cutting jobs, no good.

Can you do one on a SOLO chainsaw

@Human1337

6 жыл бұрын

If I can find one I'd love to.

my tree service is mainly rain of of stihls but the echos have the best filtration system out of all my chainsaws...the new ones are better, i burned up 3 cs-440s in hurricane charlie they were poorly built back then

Have a 590 on the way. $407 from HD.

Take the magnetic strip off so the Fedz don't track you.

Looks like dirt is getting around that filter.

Can't tell if the choke is made out of metal or not it looks like it would snap right the f*** off if it was plastic

@albertledesma5173

6 жыл бұрын

Tyler steel Plastic.

Es barra de 20 o 24 pulgada

Nice machine but I do not like the choke set up or the kill switch, metal and a cheap old zapper you might have seen on ancient saws, but that said she looks powerful and well made.

@Human1337

6 жыл бұрын

Pretty much my thoughts as well, not a bad line of chainsaws, just need a couple polishing touches to really start competing with the big names in my opinion.

@CowboyAxe

6 жыл бұрын

Yes they look well made besides the few points I mentioned. I treat my saws like my hunting rifles, I know where all the important things are, safety, bolt release etc and I trust them. I clean my saws before I shower myself or eat at the end of a day. I just leave my saws dirty enough on the outside so they do not call me a lazy fuck, hahaha. Husqvarna or Stihl users etc will not buy a good machine if it has sloppy features. But I admire the quality and for the price, it looks like one that may last a long time. If they clean up the switch and the choke lever they will fly off the shelves. The look and feel of a saw is almost as important as the power market wise.

@myronhuffman91

5 жыл бұрын

I like the simple toggle switch and choke! Also the metal housing.

Not bad for 1 piston ring motor. JS

No doubt they're a great saw but like any of them , these larger ones are well over $1000au

Only things I don't like about these saws (I have a 620P which is an upgraded version of this) are one the filtration system likes to pull in water if your like me where in tree service some days rain is unavoidable, soaks filter, instantly runs like shit! Second which is my bigger gripe because it cant be avoided is the chain tensioner will not allow for use of the complete chain, at about 30% teeth length your chain will be slack and dangling and your forced to buy new chain. Other than that, its about perfect seriously!

@Human1337

7 жыл бұрын

Yeah, that doesn't make much sense to me either. Thanks for the insight on the saws though, I love hearing what others have to say.

@alexmatthews2332

7 жыл бұрын

+Human No problem, nice reviews on everything. You Should check out some dolmars, good saw awful dealer support!

@deadlydunright7552

6 жыл бұрын

I have a cs-590 i have to remove a link to get full use of the chain, i went ahead and put some rubber 0 rings on the filter and it has helped immensely as far as the air filter sucking shit into the intake. The filter design is a problem if you dont add the o rings to the seals. Those are definitely my only bitches though its a great saw cut about 35 cords with it and its going strong, dont ever cut in the rain tho...

@theinternets7516

6 жыл бұрын

If you could put a video of what you're talking about with the O-rings that would be awesome. I ordered a 620pw the other day and it will be in tomorrow. That's something I'd like to have working right from the get-go.

You can have 2 of these Echo cs 590's Brand New at $400bucks + tax for the Retail Price of 1 husky 390 xp.at est Mark up Retail of $1000.00 And just a good or even better than the other brand.