Nice saw .

Switch on, choke out, pull till first pop, push choke in (DO NOT TOUCH THROTTLE!) This puts the carb in fast idle mode, pull until starts,, disengage chainbrake, blip throttle after 10-15 seconds of running to take it off high idle, let idle for a minute then go cut some wood.

@brainiacproductions357

Ай бұрын

I never pull the throttle and you can hear in the video when I first pull it sputter a bit so I turn off the choke and nothing. So I checked the spark plug gap cause I’ve heard of them being out of spec and it was fine. So like I said I increased the throttle a bit and it started fine. I live about 7000ft in elevation so that’s probably the reason.

@jimholz1102

Ай бұрын

Watch what you do at 6:40.

@brainiacproductions357

Ай бұрын

@@jimholz1102I stand corrected

@jimholz1102

Ай бұрын

You're welcome: also, these saws are easy to flood. If you forget to switch the ignition on and pull more than twice on choke, you're flooded (been there). They usually start faster if you don't use the decomp button. These are great saws, do a muffler mod, remove the limit caps on the carb needle screws and adjust for your altitude and weather.

@Tom-ur8qu

22 күн бұрын

Awesome saw, bought and returned three of them because I had no idea what I was doing thinking it's the saw. The forth one took limiter caps off and learned how to tune. Then did muffler mod from gear head and filter mod from A2d. So blessed to have this saw, God is good

Echo makes a nice product. Is that .325 or 3/8 chain?

@brainiacproductions357

4 күн бұрын

Yeah they do. It’s a .325