Rich nice TreeMonkey stand.👍👍👍 Nothing but the best, your saws are liked by a very hardened community.♥️💖💝❤️
@richevy5224 Жыл бұрын
Nice explanations Rich. I love your videos. 👍
@jaymessmall7745 Жыл бұрын
Hello Ms flag I just wanted to say hi and thank you for making such great helpful videos and always staying humble, God bless you and yours and with love peace and saw Grease Jay small
@zeromark202 Жыл бұрын
Great video and info! Sure wish Echo didn’t do all those transfers ports and raise the msrp $200 Have a 620 & 355t and my favorite saws.
@Super-Dave-Outdoors Жыл бұрын
Actually makes me feel better about facing hurdles on mine, there is a new jug on my bench waiting for me to learn some more tricks before going after it again.
@tedneitzel Жыл бұрын
Can't wait to see the improvement in the wood!
@RailPRO793 Жыл бұрын
Donnie Walker has done a number of 7310’s and swears by them. I’m curious what he’s doing differently. He doesn’t elude to it taking more time then other saws.
@westcoastsaw1368 Жыл бұрын
Great overview Richard 👌
@aaronpowell4885 Жыл бұрын
I love my echoes but they are definitely a little different. Sounds way better!
@dn0682 Жыл бұрын
Very interesting video and well put together. Well done, I am sure now really cuts.
@IndianaDoug Жыл бұрын
Good review. Yes there’s certainly not a better air filtration system on the market.
@jimssawsnstuff8903 Жыл бұрын
Those are good numbers, I’d like to see it run against a stock 661 when you get it dialled in 😎👍
@richardflagg3084
Жыл бұрын
I'll be doing some test cuts today. I don't see it competing against a 90cc saw though. We'll see
@jimssawsnstuff8903
Жыл бұрын
@@richardflagg3084 mine cuts neck and neck with the stock 661 m-tronic
@Rob-tl9md
Жыл бұрын
@@richardflagg3084 think there are a few well over 8hp.
I also have 2 2511ts I would like to send u for parts. They do run, but bar stud pulled out on one of them. I guess Lee Chow didn't glue it good enough. Lol
@Super-Dave-Outdoors Жыл бұрын
A Shindaiwa 757 piston fits in there but I aint figured out if it is worth trying to swap it over yet or not. Still waiting on my 7310 piston to come in to compare the two.
@Doc-Cole_Trickle-of-Chainsaws
Жыл бұрын
👍🆙SD
@Super-Dave-Outdoors Жыл бұрын
The factory says to use threebond 1207D where those transfer caps are.
@richardflagg3084
Жыл бұрын
If it had been the color of peanut butter I would have thought it was Liquid Nails. Lol!
@Super-Dave-Outdoors
Жыл бұрын
@@richardflagg3084definitely a bear to get off and clean up. I dont think it is 1207D but that is what they tell you to replace it with.
@cajun3197 Жыл бұрын
Grilled cheesus is right. They’re wacky!
@Doc-Cole_Trickle-of-Chainsaws
Жыл бұрын
👍🆙🐊
@Cholton327
Жыл бұрын
Lol.
@tomasznumrych7187Ай бұрын
Richard, I'd like to get one of these ported, can I send it your way?
@cajun3197 Жыл бұрын
Akin to a dodge. Leftover parts from Ford and Chevy. Parts leftover from husky and stihl 😂😂😂
@Super-Dave-Outdoors
Жыл бұрын
With extra holes drilled in them lol.
@Cholton327
Жыл бұрын
Lol.
@aaronpowell4885
Жыл бұрын
Had a friend was a mechanic for over 40 years. As he'd say about dodge, "they're all bass ackards" 😂
@cajun3197
Жыл бұрын
@@aaronpowell4885 lol
@Cholton327 Жыл бұрын
How can I get ahold of you Richard? I would like to send a gen 1 201t . Someone told me the gen1 201t with a star in the serial number is suppose to be different. How true is that.
@richardflagg3084
Жыл бұрын
Maybe back in the day the saws with a "+" may have been different, but I think it's just an old wives tale. I cant take on any more work outside of my local area. I'm already running way behind.
@hoffmanbmxbikerider Жыл бұрын
I'm curious what your thoughts are on opti2 oil at 71:1 for my saws. Some are ported and some are stock
@dougburton1999 Жыл бұрын
I don’t use the Stihl Ulta. I use the Stihl White bottle Premium.?? Any thoughts. I am going to switch to the echo after my jug is empty… cool in depth tests that ya do… cheers
@richardflagg3084
Жыл бұрын
It's better than the orange and silver bottles that we have available in the States.
@garengtutorial8923 Жыл бұрын
Bagus
@elespe8167 Жыл бұрын
👍
@scottsmith8056 Жыл бұрын
Definitely sounds mean!
@batmantiss Жыл бұрын
I sure like my smaller echo's, my timberwolf and my 355's. I stay away from the bigger saws, not enough bang for my buck.
@user-jl9ip4bv8g Жыл бұрын
Hi, I really enjoy watching your videos. Is Husqvarna HP oil as good as XP+ oil?
@richardflagg3084
Жыл бұрын
XP+ is a more modern oil with a top tier JASO "FD" rating. Nice to see Husky keeping up with the times. I'd still run it at 40:1 for the best results.
@Okinawa1914
5 ай бұрын
@@richardflagg3084 Xp ,Ls + = JASO FD ISO EGD seim oil
@ToddAdams1234 Жыл бұрын
Richard, how does the Echo RYV compare to the name brand “Right Stuff” RTV or have you ever heard about Right Stuff?
@Super-Dave-Outdoors
Жыл бұрын
Whatever they glue those caps on with is stronger than "Right Stuff". Right stuff does not have the same resistance to gasoline but it is all i use on mower valve covers. The factory tells the techs to use Threebond 1207D when reassembling clamshells and transfer caps but i dont think that is exactly what they use, probably another Threebond product being Japanese.
@ToddAdams1234
Жыл бұрын
@@Super-Dave-Outdoors I wonder what would be better for a base gasket delete; 1207d or 1184. Or have you tried them both in THAT particular application? Just to get off track. 🤔
@jonathanhoekstra6174 Жыл бұрын
Child proofed. Good description. Is that synonymous with don’t mess with our design?
@richardflagg3084
Жыл бұрын
Yessir
@Doc-Cole_Trickle-of-Chainsaws Жыл бұрын
👍🆙RF
@Doc-Cole_Trickle-of-Chainsaws
Жыл бұрын
Shout out 2 the BigGuy👍🆙
@7177907 ай бұрын
kzread.info/dash/bejne/pIyq0phsfLqWkqw.htmlsi=qh87bWshPkAY3XGm How to fix the non-captive cover screws
Пікірлер: 52
Rich nice TreeMonkey stand.👍👍👍 Nothing but the best, your saws are liked by a very hardened community.♥️💖💝❤️
Nice explanations Rich. I love your videos. 👍
Hello Ms flag I just wanted to say hi and thank you for making such great helpful videos and always staying humble, God bless you and yours and with love peace and saw Grease Jay small
Great video and info! Sure wish Echo didn’t do all those transfers ports and raise the msrp $200 Have a 620 & 355t and my favorite saws.
Actually makes me feel better about facing hurdles on mine, there is a new jug on my bench waiting for me to learn some more tricks before going after it again.
Can't wait to see the improvement in the wood!
Donnie Walker has done a number of 7310’s and swears by them. I’m curious what he’s doing differently. He doesn’t elude to it taking more time then other saws.
Great overview Richard 👌
I love my echoes but they are definitely a little different. Sounds way better!
Very interesting video and well put together. Well done, I am sure now really cuts.
Good review. Yes there’s certainly not a better air filtration system on the market.
Those are good numbers, I’d like to see it run against a stock 661 when you get it dialled in 😎👍
@richardflagg3084
Жыл бұрын
I'll be doing some test cuts today. I don't see it competing against a 90cc saw though. We'll see
@jimssawsnstuff8903
Жыл бұрын
@@richardflagg3084 mine cuts neck and neck with the stock 661 m-tronic
@Rob-tl9md
Жыл бұрын
@@richardflagg3084 think there are a few well over 8hp.
@Okinawa1914
5 ай бұрын
@@richardflagg3084 echo 7310 ,mix oil motul 710 2t , 40/1 ok ?
I also have 2 2511ts I would like to send u for parts. They do run, but bar stud pulled out on one of them. I guess Lee Chow didn't glue it good enough. Lol
A Shindaiwa 757 piston fits in there but I aint figured out if it is worth trying to swap it over yet or not. Still waiting on my 7310 piston to come in to compare the two.
@Doc-Cole_Trickle-of-Chainsaws
Жыл бұрын
👍🆙SD
The factory says to use threebond 1207D where those transfer caps are.
@richardflagg3084
Жыл бұрын
If it had been the color of peanut butter I would have thought it was Liquid Nails. Lol!
@Super-Dave-Outdoors
Жыл бұрын
@@richardflagg3084definitely a bear to get off and clean up. I dont think it is 1207D but that is what they tell you to replace it with.
Grilled cheesus is right. They’re wacky!
@Doc-Cole_Trickle-of-Chainsaws
Жыл бұрын
👍🆙🐊
@Cholton327
Жыл бұрын
Lol.
Richard, I'd like to get one of these ported, can I send it your way?
Akin to a dodge. Leftover parts from Ford and Chevy. Parts leftover from husky and stihl 😂😂😂
@Super-Dave-Outdoors
Жыл бұрын
With extra holes drilled in them lol.
@Cholton327
Жыл бұрын
Lol.
@aaronpowell4885
Жыл бұрын
Had a friend was a mechanic for over 40 years. As he'd say about dodge, "they're all bass ackards" 😂
@cajun3197
Жыл бұрын
@@aaronpowell4885 lol
How can I get ahold of you Richard? I would like to send a gen 1 201t . Someone told me the gen1 201t with a star in the serial number is suppose to be different. How true is that.
@richardflagg3084
Жыл бұрын
Maybe back in the day the saws with a "+" may have been different, but I think it's just an old wives tale. I cant take on any more work outside of my local area. I'm already running way behind.
I'm curious what your thoughts are on opti2 oil at 71:1 for my saws. Some are ported and some are stock
I don’t use the Stihl Ulta. I use the Stihl White bottle Premium.?? Any thoughts. I am going to switch to the echo after my jug is empty… cool in depth tests that ya do… cheers
@richardflagg3084
Жыл бұрын
It's better than the orange and silver bottles that we have available in the States.
Bagus
👍
Definitely sounds mean!
I sure like my smaller echo's, my timberwolf and my 355's. I stay away from the bigger saws, not enough bang for my buck.
Hi, I really enjoy watching your videos. Is Husqvarna HP oil as good as XP+ oil?
@richardflagg3084
Жыл бұрын
XP+ is a more modern oil with a top tier JASO "FD" rating. Nice to see Husky keeping up with the times. I'd still run it at 40:1 for the best results.
@Okinawa1914
5 ай бұрын
@@richardflagg3084 Xp ,Ls + = JASO FD ISO EGD seim oil
Richard, how does the Echo RYV compare to the name brand “Right Stuff” RTV or have you ever heard about Right Stuff?
@Super-Dave-Outdoors
Жыл бұрын
Whatever they glue those caps on with is stronger than "Right Stuff". Right stuff does not have the same resistance to gasoline but it is all i use on mower valve covers. The factory tells the techs to use Threebond 1207D when reassembling clamshells and transfer caps but i dont think that is exactly what they use, probably another Threebond product being Japanese.
@ToddAdams1234
Жыл бұрын
@@Super-Dave-Outdoors I wonder what would be better for a base gasket delete; 1207d or 1184. Or have you tried them both in THAT particular application? Just to get off track. 🤔
Child proofed. Good description. Is that synonymous with don’t mess with our design?
@richardflagg3084
Жыл бұрын
Yessir
👍🆙RF
@Doc-Cole_Trickle-of-Chainsaws
Жыл бұрын
Shout out 2 the BigGuy👍🆙
kzread.info/dash/bejne/pIyq0phsfLqWkqw.htmlsi=qh87bWshPkAY3XGm How to fix the non-captive cover screws