A little problem trying to install on a Trek Domane+. The brake cable ran under the sensor and the unit would not fit on over the sensor. I ended up taking the sensor off and re-routed the brake cable to be above the unit and I was able get the unit on. Had a messy install by using plastic ties and electric tape to make it work in order to ride the next day. Plan on redoing it to make it a cleaner install latter. I'm in the US so my bike should go up the 28MPH, but because of a tire size error, the motor cuts off normally at 26.5 MPH. Got the following results. The Garmin showed 20, bike showed 13. Garmin 24, bike 16. And finally Garmin 33, bike 20. Should be able to get it up to 40-42 MPH, well maybe if I can pedal it that fast and probably not for long. Being able to have short burst in the low 30's makes it a great for the groups I ride with. Only issue I have to deal with is the Domane+ has a reading of estimated miles left on the battery that I use on longer rides. I will have to figure out the math on that since the bike thinks it is going slower.

Just received my order for my Giant Roam E+ GTS 2022, it’s increased my pedal assist speed by near enough 7mph impressed and easy to install, feel like the legal pedal assist limit in the uk should be 25mph anyways 👍🏼

@ebikespartsandaccessories3039

Жыл бұрын

Thanks for the positive feedback, in my opinion the badassBox is one of the best tuning in the market since it is super easy to install and remove..Furthermore, the badassBox service support is excellent

I've been using a badass box for years, amazing product.

@ebikespartsandaccessories3039

2 жыл бұрын

Hello Jeremy, indeed it is an awesome tuning, super easy to install

Thanks, this helps a lot!

works well ! delighted 👍🏻

@ebikespartsandaccessories3039

11 ай бұрын

Hello Max, thanks for your positive feedback :-)

i’ve just purchased the “slim for Bosch “ version. May I please ask “Do you have an install video for that product ?”

@ebikespartsandaccessories3039

11 ай бұрын

yes here: ebikespartsandaccessories.com/collections/ebike-tuning-bosch/products/badassbox-4-for-bosch-slim-sensor

Does de BAB type 3.4 also works on the new Bosch-system (Active Line Plus)?

@ebikespartsandaccessories3039

2 жыл бұрын

It should work but the latest 4 version has been engineered to override the latest Bosch FW update (anti-tuning)

Hey! Is it really necessary to buy a badasss box exactly for a Yamaha engine or the bosh model is also suitable for Yamaha (if you are able to mount it somehow) and it's only about the shape of a speed sensor? Or it has something to do with different soft used by different brand? Thanks for your answer

@ebikespartsandaccessories3039

5 ай бұрын

For the yamaha you will require the Yamaha model due to speed sensor compatibility

Can I use this on my Cube Touring Hybrid ONE 500 Electric Hybrid Bike Grey/Black (2021) ?

@ebikespartsandaccessories3039

Жыл бұрын

Yes! and I can see that you did order it already :-)

Im not sure which one i would need as there are a few different ones of these products for my cube 23 reaction hybrid pro smart system any advice would much appreciate it thanks

@ebikespartsandaccessories3039

3 ай бұрын

there are a few variants of the Bosch Smart System systems.. please contact us directly via email: info@ebikespartsandaccessories.com

My only issue is the total milage shown. Bought from new i fitted a bagass to my bike fitted with a bosch. The speedo says i just clocked 1000 miles. How many real miles have i done is difficult to work out .

@ebikespartsandaccessories3039

10 ай бұрын

yes! indeed you are right because speeds above 23 km/h are recorded as maximum speed of 23 km/h..the correct speed is not displayed since there are no interactions with the engine software.. this is the beauty and simplicity of the BAB

Hi I bought 2 days ago Cube Reaction Hybrid Performance 625 Allroad - 625 Wh - 2023 do you know if BadassBOX work on this Ebike ? thanks

@ebikespartsandaccessories3039

11 ай бұрын

Yes it should work if the speed sensor is compatible with the badassbox. please check the guideline for compatibility: ebikespartsandaccessories.com/blogs/electric-bikes-tuning-blog/2022-bosch-smart-system-tuning-bes3

Can i use a Badassbox 3.3 for Bosch on a Fazua motor? Thanks

@ebikespartsandaccessories3039

10 ай бұрын

I strongly advise to use the new updated version 4 : ebikespartsandaccessories.com/collections/ebike-tuning-fazua/products/badassbox-4-for-fazua-ebike-tuning-speed-unlock please also check the speed sensor shape and the location of the magnet since there have been a few changes in Fazua settings in the past few years!

I used it for Bosch active line plus, had to buy 3 motors within 6 months, not cheap

@ebikespartsandaccessories3039

2 жыл бұрын

..???? I did use it for 3 years on several Shimano engine..rode several thousand Km..never had a problem..

@daveevans1935

2 жыл бұрын

@@ebikespartsandaccessories3039 did you ride it daily or like couple times a month

@ebikespartsandaccessories3039

2 жыл бұрын

@@daveevans1935 daily on the road and then 1 or 2 times a week into the mountain bike parks in the Tropical FNQ in Australia where we do experience high rainfalls (wet season). We did ride the bikes even in creeks..The badassbox does not interfere with the engine power and torque so it is not a contribution factor towards engine breaking down..this happens also on stock bikes and over several brands..:-(

Is there a kit that can be attached to CORRATEC E-POWER X VERT CX? If I install it again, is there a possibility that an error will occur?

@ebikespartsandaccessories3039

10 күн бұрын

We could work for a tuning solution if the magnet shape is similar to one of our design. Please forward the speed sensor photo via email to: info@ebikespartsandaccessories.com

Can i use it on haibike sduro hardnine 6.0

@ebikespartsandaccessories3039

Жыл бұрын

Here a link to our tuning compatibility and tuning characteristics: ebikespartsandaccessories.com/blogs/electric-bikes-tuning-blog/yamaha-tuning-blog

Can I use it on giant explore e+3 ?

@ebikespartsandaccessories3039

8 ай бұрын

Yes but please check speed sensor shape and location on your bike as there are several BAB tuning model to accomodate for different Giant setups: ebikespartsandaccessories.com/search?options%5Bprefix%5D=last&q=badassbox+4+giant

So it never exceeded 18? So what’s it purpose

@ebikespartsandaccessories3039

3 жыл бұрын

The 18km/h refers to the speed on the display. Practically, the BAB halves the speed sensor signal which affects the speed reading on the display. Once you pass over the 18km/h the speed on display will remain at 18km/h regardless if you are riding at 30, 40, or 50 km/h. Hope this answer your question

Does it work with factory magnet?

@ebikespartsandaccessories3039

7 ай бұрын

yes it should work also with the factory magnet!

I got one for my urban arrow and barely get it to reach 30-32kph...

@ebikespartsandaccessories3039

7 ай бұрын

please check that the magnet is properly aligned. please send a photo of the box aligned with the magnet to info@ebikespartsandaccessories.com we will check it out for you!

Why do you turn the magnet 90 degrees ?

@ebikespartsandaccessories3039

Жыл бұрын

Due to different bikes design configurations it could happen that the speed sensor is too close to the magnet. In this case, we advise to twist the magnet at 90 degrees to gain some extra clearance and thus improve the magnetic communication between the badassbox and the magnet.

Hey my friend can you connect a throttle to a Bosch motor???

@ebikespartsandaccessories3039

29 күн бұрын

Sorry, we are not sure if this is possible

@christophermooney8928

28 күн бұрын

@@ebikespartsandaccessories3039 I just seen a small video and the guy had connected a throttle to a Bosch motor somehow and it was flying 👍🏻👍🏻

@ebikespartsandaccessories3039

28 күн бұрын

@@christophermooney8928 that is awesome, my sincere apologies for the misleading info, I am not familiar with the assemblage of throttle kits on the Bosch motor. I was sure that it was not possible to install such kit..:-(

I am experiencing trouble with my box. The motor stutters and kicks in and out at low speed in low gears and I cannot get the indicated velocity change. I have moved the magnet up and down the spoke without solving this problem. Anyone have any ideas?

@ebikespartsandaccessories3039

5 ай бұрын

please also check that the battery in the box is fully charged

@Ukmongoose3

5 ай бұрын

@ebikespartsandaccessories3039 Hi, it’s a new Duracell 👍

I have a ktm mountain bike (macina 291) bosch cx performance engine, the sensor is located at the hub and there is no magnet on the spokes but located in the hub, can we use this box?

@ebikespartsandaccessories3039

Жыл бұрын

Yes we do have kits also for e-bike with the magnet integrated into the brake rotor but it will look bulky..for this reason, I will suggest a wired tuning so it can be hidden into the engine case.. please check this out: ebikespartsandaccessories.com/search?options%5Bprefix%5D=last&q=speedbox+bosch+

Attention pour le badass 4 Bosch, il n y a pas de défaut d affichage au compteur (alternance et dégressivité à partir de 18 km/h). Si le badass fonctionne la vitesse est minorée de 8-9 km/h en continue. Faites une mesure avec une appli gps, vous serez à 38-39 km/h alors que l affichage est à 26 km/h.

@ebikespartsandaccessories3039

11 ай бұрын

Yes you are correct, the badassbox does not retain the speedometer accuracy for speeds above 20 km/h. If you are after speedometer accuracy then you will have to get a tuning that plugs into the engine ports which can be messy as you have to remove the engine cover, pedals, and etc..

Это надёжный прибор? Стоит ли его приобрести?

@ebikespartsandaccessories3039

3 жыл бұрын

Да, именно так! напишите мне, чтобы узнать о совместимости с маркой, моделью и годом вашего велосипеда.

I bought one for my giant fathom 29 - wouldn’t work sent it back

@ebikespartsandaccessories3039

Жыл бұрын

For the Giant systems there is a trick to perform due to the magnet being too close to the speed sensor..:-(

I hate the government for this

@Ukmongoose3

5 ай бұрын

Totally agree. The restriction in the UK is pathetic and just there to let you know that they control everything.

I have tried to mount it on my eBike, but the spokes of the wheel turn out to be too close to the box, and I can't position the magnet correctly without it banging on the badassbox. Is there a solution?

@ebikespartsandaccessories3039

10 ай бұрын

you can turn the magnet at 90 degree so the face of the magnet point up into the ski or down to the floor. Other option is to relocate the magnet on the further spoke, the one on the other side of the wheel.. both method allows for extra clearance between the box and the magnet.. If the problem persist just contact us via email!

Do someone have problem when all put back in original state? When I put it back on in factory settings yamaha pw st motor, display is blinking (range, odo etc) and speed sensor doesnt pick up spee (0 km /h) motor is workimg, I ve tested through diagnostics on yamaha diag software , and in diagnostic program is showing no of turnings of the wheel regularly, but no assistance anymore Bike is haibike alltrail 6

@ebikespartsandaccessories3039

Жыл бұрын

please email me all the details at info@ebikespartsandaccessories.com I will forward the details to the tuning manufacturer for a troubleshooting solution.

@belgradedayz

11 ай бұрын

Did you fix it?

@TravelCarsPasicevoPhotography

11 ай бұрын

@@belgradedayz just drove with battery on for 150 to 250 km and it will self reset

Is there a DIY guide for a Badassbox? It does not look that "intelligent". Simple microcontroller, hall sensor, electromagnet. Problem with the real thing is it halves the rate, which is utterly stupid IMO. I want it to reduce the rate by like 10-20%, to get the promissed speed: Bosch motors usually run 22,5 when they show 25 on display. I just want to fix that glitch, not speed into illegal terrtory.

@ebikespartsandaccessories3039

2 жыл бұрын

I do not think that it is a stupid system at all since it is a plug and play tuning that only interfere with the speed sensor..if you want to retain the correct speed then you will require a tuning that plugs directly into the speed sensor and also on the engine port..it is only with this configuration that you will be able to manipulate the incoming signal from the speed sensor (data)..in order to do this you will require a microchip (which make use of different electronics and communication system that completely differs from the standard micro-controller system used to halve the speed sensor signal). Then, the incoming signal require to be manipulated and adjusted to match and override the engine software..but retaining the correct displayed speed. It is only in this way that you will be able to get the real speed displayed..on a personal point of view, I do not care about the real speed when I am riding..as the landscape is more interesting that seeing numbers.. and less dangerous..

@lovemadeinjapan

2 жыл бұрын

@@ebikespartsandaccessories3039 I'm not interested in how the solution is achieved, the thing I call stupid is halving the rate. Why can't that be flexible. Like 10% slower? That would make more sense, as you can choose your own new limit you are comfortable with. Going from 25 to 50 max is pretty kamikaze I think.

@ebikespartsandaccessories3039

2 жыл бұрын

@@lovemadeinjapan please read the above as I did explain in details why this cannot be archived with the badassBox as it rely on micro controllers.. to archive a desire speed rate then you will have to install a Volspeed or SpeedBox or any tuning that plugs into the engine....completely different electronics and a far complex programming processes..

@lovemadeinjapan

2 жыл бұрын

@@ebikespartsandaccessories3039 Does the badass have a microcontroller or not? If it does, it is a matter of changing the code. I'm halfway to make my own. The sensing of the magnet is working. Step 2 is generating a delayed compatible pulse from that. I won't make a magnet coil, but feed the pulse directly to the motor. That is easier.

Good product but the alarm sound is ridiculously inaudible

@ebikespartsandaccessories3039

8 ай бұрын

Sorry but we are not sure to which product you are referring to. the badassbox product does not have any alarm sound!

Simpler method: add a magnet inside the pedal, change position to lign with the new magnet. You are completely "derestricted".

@ebikespartsandaccessories3039

8 күн бұрын

that trick does not work anymore.. was working back on the days before the anti-tuning detection software updates