If this video helps you out hit that 👍👍👍👍

You got a great “cut to the chase” presentation 👌👍✔️ Thanks you, So many times, KZreadrs add way too much, unfortunately… Good job again, I feel absolutely that is to get it done on mine, I liked and subscribed keep it up

Thanks for the time.👍

Thanks for the video, looks easy enough!

@BreakFreeHomestead

2 жыл бұрын

Thanks for supporting our channel Bob! Hopefully you got it done without issue.

Very informative !

Made that look so easy.

@BreakFreeHomestead

2 жыл бұрын

Its too easy! 💪💪

Thank you! This is going to save me a life time of trouble

@BreakFreeHomestead

2 жыл бұрын

Awesome! Thanks for supporting our channel Donte!

Great guide. Thanks 👍

@BreakFreeHomestead

Жыл бұрын

Thanks so much for supporting our channel! Glad it helped!

Gee thanks she fast forward through the where I needed to know how to sharpen them

Very helpful. Thanks

@BreakFreeHomestead

4 ай бұрын

Glad it was helpful!

At 3:00 Daaaamn you need to mow! lol

Thank u friend 💪🏿💪🏿💪🏿💪🏿💪🏿

@BreakFreeHomestead

9 ай бұрын

Always welcome

Awesome video. Thanks. I'm going to see if I can drive mine up onto car ramps. That would accomplish the same goal and maybe be easier then using a jack for me.

@BreakFreeHomestead

Жыл бұрын

Thanks! Yeah that should work as long as it clears.

@justinberry3991

Жыл бұрын

Using car ramps the ramp part of car ramps get in the way

@GBS-Warrior

Жыл бұрын

@@justinberry3991 I wondered if that might be a problem

my bolt is really on there...did they use a impact to put these on?wow

@BreakFreeHomestead

2 жыл бұрын

Oh man, good luck. Grab a breaker bar or improvise.

You need to disconnect the negative terminal....it's still "hot".

I drop the wheels down on those blocks just for the fact that when the jack does slide off the deck hanger mount I don't have a heart attack.

My God! Who allows the deck's undercarriage to get into that condition. Keeping it clean is a better way to maintain the deck's condition for years. I learned the hard way and I hosed after ever usage. The deck gave out and I could not find a deck for my Craftsman lawn tractor. After only 4-5 yrs old, and manufacturing stopped. I had to discard the deckless tractor. If one gets on a driveway/patio, lowers it to #1 ground level, and puts the hose into the clean threaded threads and turn the water on (and engine running with blades turning for about 5 minutes, it can go a long way to removing lots of hard mud and grass).

@charliekasstan3268

Ай бұрын

Lol never ever use water it will rot out so fast Use compressed air instead then use a sprayer mix diesel & oil & coat the undercarriage with the wand

@jerrymontalbano3222

Ай бұрын

Charlie that may well be so. Two things. One, using the water cleaning inlet with hose attachment is supposed to do the job. However, it barely does anything more then wet underneath the deck. I do use the spray/cleaning attachment with hose, but on a pavement/driveway, I turn the motor on and then the deck lowered to "O" allowing strict underneath cleaning and the grass, mud etc. cleans it thoroughly. Then when clear water had emerged visually, I know the underneath was done. Without the water, I turn it on with the deck raised and without water and it dries underneath. The whole process takes about 5 minutes. Secondly when the deck is under warranty for 10 years, I don't fret IF it should rot and a new once replacement is on the way to repairing it.

I would have disconnected the spark plug wires before attempting to remove the blades.

@BreakFreeHomestead

2 жыл бұрын

Why's that? Has yours started itself before?

@mikemontemurro8088

Жыл бұрын

Ahhh….the old deadly phantom self starting mower

@enblanchard5492

Жыл бұрын

@@BreakFreeHomestead If you spin the blade, isn't the idea that it could kick on the motor, potentially? I am with Larry here. My dad always told me to pull the spark plug wire! Wrong?

@BreakFreeHomestead

Жыл бұрын

@enblanchard5492 if you start the motor with the deck blades disengaged do the blades spin? How would the blades spinning start the motor and engage the pulley? Wives tale.

@justinberry3991

Жыл бұрын

Here we go...

No way our mine going to get loose that easy. His bolt came loose awfully easy also I think he skipped the part where he had to fight to loosen it

Why not just take the deck off, take blades off, then clean the deck so it doesn't rust out, then sharpen blades with a file in a vice or grinder???

@BreakFreeHomestead

4 ай бұрын

Thats always an option!

@tangofoxtrot4603

3 ай бұрын

Because its a 4 minute video, not 40 minute vid.

@thomashackley4719

2 ай бұрын

@@BreakFreeHomestead I have a question ? Do the positions of the blades matter when putting new ones on?