Its strange that people worry about these types of clothes being flammable, when the clothes most people wear everyday/while camping is made of plastic and will also catch fire and probably melt into your skin haha. If it's not a problem with normal clothes, I think its fine with these as well

@asmodiusjones9563

2 жыл бұрын

He should test it by building a camp fire and putting cedar branches in it, then put the cloak next to the fire to see how it fares against popping embers. Regular nylon clothes melt like crazy, they’re terrible.

@spacehooliganzack7429

Жыл бұрын

Most clothes are less loose and billowy than this cloak. It's shape gives it greater access to catching fire in the first place than an ordinary pair of pants for instance

@walkstheman98

Жыл бұрын

@@spacehooliganzack7429 true, but I've never really heard of people worrying about cloaks made from other materials the same way, which is why I found it weird.

@hildolfrdraugadrottin7279

Жыл бұрын

Strange people are the best kind.😊

@marioslani5874

Жыл бұрын

Qà

'In retrospect I should have done this outside.' *proceeds to do it inside again* I do love watching these videos.

@SkillTree

2 жыл бұрын

I may be Cl3ver.... I never said I was smart 🤣

@areformingamadon

2 жыл бұрын

In all seriousness though, love this one, bought material for myself and two buddies.

@justsomeguy9555

10 ай бұрын

@@SkillTree When our WIS is higher than our INT...😊

Pro tip for those in the future- cut your fabric before dying it so the dying process is easier and faster. also saves you water and dye. It's much easier to dye 4 yards of fabric than it is to dye 12 yards.

A note on the flame stuff, the cotton acts as a wick that draws in the beeswax and paraffin like a candle, so it'll burn more slowly as it melts and draws in the wax to drive the fire. Upside is you're wearing a slow burning candle, the downside is you're wearing a slow burning candle.

Only thing missing is a penannular broach to lock the cloak into position

@potatomancer4316

2 жыл бұрын

I have Tiamat style broach and the only thing I’m missing is a cloak

@k98killer

Жыл бұрын

@@potatomancer4316 just get some fleece and make one. No sewing required; just measure, cut, wash, and dry.

I think people get waxed cloth and oil cloth confused. Oil cloth is quite a bit more flammable than an un-oiled equivalent, but waxing a cloth would actually make the wax burn before the cloth, acting like a wick. Not necessarily a good thing, but doesn't make the cloth any more flammable.

@SkillTree

2 жыл бұрын

So I have become a human candle! Lol.

@kevinfelton689

2 жыл бұрын

Townsend has a video where they make traditional oil cloth using acetone or turpentine (I forget which one), and yeah it's flammable as hell, don't wear that stuff.

@nyetloki

2 жыл бұрын

Given of course, if you talk about old oil cloth instead of time modern meaning of laminated vinyl backed fabric. PVC melts instead of burns.

@Thalanox

2 жыл бұрын

@@SkillTree Fun fact: When some people try to dispose of murder victims by setting the corpse on fire, the bodies literally become like a human candle! The heat from the flames melts the body fat, which is then transfered to the burning part of the cotton clothing. At least one murderer has been caught from this, because the fire gives off very obvious black smoke.

@Suillibhain

2 жыл бұрын

Please be more accurate. It depends on the oils and fabrics used. Tincloth is a combination of oils and wax. Not all oils ignite easily, others ignite with little help. Also if you use say wool wich is already fire retardant, and inpregnate it with lanolin oil, it can ignite, with a blow torch, for a while... that said using linseed oil on cotton rags left in the sun spontaneously combusts. Fear mongering for the sake of fear mongering gets no one anywhere, and keeps people from using useful tools out of irrational fear.

I use natural Turpentine, boiled Linseed Oil and Beeswax in an equal amount to waterproof my stuff with. It doesn't make the fabric so stiff. My grandmother used this to make wax table cloth for the kitchen table or garden-table, and my grandfather used the same to protect the wooden handles of his tools with - or the wooden boards of his raised garden beds and out-door furniture.

@Case2_0

2 жыл бұрын

Thanks for the woodworking tip. Here’s one for you: if you put a clump of steel wool in vinegar, you get an ebonizing solution. It makes wood black without burning it. Some woods need extra reactant, so let it soak up some black tea first to make it guaranteed to be black.

@centel43

2 жыл бұрын

@@Case2_0 and an awesome black dye for leather aka leather vinegaroon

@michaelfranciotti3900

2 жыл бұрын

I hear it also does a good job of protecting metal from moisture.

@volkkeslate

2 жыл бұрын

@@centel43 Just make sure you neutralize the acid with a mix of water and baking soda. Let it dry a day or two then you can wax it or oil it

@Mrsmeigor

Жыл бұрын

Do you just boil it all together and then apply it to the cloth? And do you have to remove it or soak it up like he had to do? I would really like to try it but am not entirely sure how to do it. Also do you think Turpintine substitute will do the trick as well? It's the only thing they sell in the DIY store in germany.

If you ever wanted to do a "winter version" of this, USGI wool blankets are pretty cheap AND already green :)

@k98killer

Жыл бұрын

Where do you get them? Edit for clarification: I have never seen them for cheap; everywhere I've seen them, they have gone for $40-100 each. Fleece from any store that sells fabric is a more economical way to go about it. $3-4 per yard, and you need just 2.5-3 yards. Measure, cut, wash, dry, done.

@RealAmericanSanta

Жыл бұрын

@@k98killer got mine from goodwill for $2 but it was a kind of worn bluish color. It was probably a much richer blue, but made out of the same fabric

@RealAmericanSanta

Жыл бұрын

@@k98killer got mine from goodwill for $2 but it was a kind of worn bluish color. It was probably a much richer blue, but made out of the same fabric

@Davmm96

Жыл бұрын

@@k98killer 40 $ for a wool blanket is still good. Not everything has the same value as polyester or cotton, which are very cheap materials since one is made of plastic and the other is super mass-produced. Fleece is poly and/or cotton just manufactured differently. If you want a summer cloak for those fresh night, fleece will do the job. Thing is, wet/humid cotton and polyester aren't gonna keep you warm and polyester smells bad after one day. One thing you could do to mitigate that is have a 2 layer cloak (fleece lining and waxed canvas outer). That could be a super sweet setup if you just attach them with buttons as you could wear one without the other.

@k98killer

Жыл бұрын

@@Davmm96 I have recently made both a fleece ruana and a waxed canvas one. I initially thought I'd wear them in layers, but I didn't consider using buttons to hold them together. I imagine it would require a lot of buttons, and I would have to make a second fleece ruana to match the dimensions of the canvas one since mine are different. But so far, I just wear the fleece one when I'm cold and the waxed canvas one when it's raining.

It'd be really cool to see a cloak designed from the Ranger's Apprentice.

@RidgeBoi

Жыл бұрын

That's the main reason I clicked this vid lol. Thought it was about that kinda Ranger's cloak.

@josephburge168

Жыл бұрын

Just ordered my recurve Hungarian horse bow from Amazon lol gonna make me a saxe a throwing knife the double sheath however I decide to make it and the quiver. Just need the time to light the forge

@wildcardproductions6010

Жыл бұрын

Someone else who's heard of Ranger's Apprentice!

@manteltwinkelwink2271

Жыл бұрын

Re-reading that series right now! That would be amazing.

@truthhunterhawk3932

Жыл бұрын

Camouflage, yes!

My wife and I made a couple ruana cloaks a few months back, they are freaking awesome. I used mine most of the winter. I think I might need to make myself another one for warmer weather. Great vid.

Literally just sat here and did this with my son. We coincidentally had to two of those same drop clothes from HF,and I said hey,let's make Ruanas. Lol. They came out so good. We still have to sew them,but I'm gonna let mine fray a bit for that worn out look. Thank you so much. He's 7,and is now so obsessed with his new Ruana cloak and the rennaissance faires. 🙌🏾🙌🏾🙌🏾❤️😃

I don't really go to larp events, but I do hang out in the woods with my buddies, and I've been wanting a poncho for a good long while, so this is quite useful, thank you for the video and thank you for making the process easy to follow.

I made a post-apocalypse coat out of the exact same fabric. I was looking at canvas like materials & was like "This drop cloth is cheaper than even thinner fabric at the fabric store & I don't care about the extra seam that is down the middle." I did find that the fabric will separate away from seams or stress points as the weave is not as tight or strong as it first looks. I solved this by using glue & sealant along seams to lock the weave in place. For the weatherproofing I used a light coat of spray rubber on the shoulder areas & along the bottom. This helped with keeping the fabric from separating along the shoulder seams & stress points, made the wettest parts extra waterproof, protected the bottom edge from wear, and helped the esthetics I was going for. Then I just used a couple cans of outdoor fabric spray over the whole thing.

For a heavier multi function cloak, the harbor freight tarps you used for a tent. Make a half circle hooded cloak that goes right to the ground. Now the multi function bit. Crouch down and it covers your feet and the natural folds make you blend into the woods, camouflage. Cut some 6' poles, stick them in the ground forming a circle that comes together at the top, drape the cloak over it, emergency tent. Very ranger-ey.

@hyperguyver2

2 жыл бұрын

I would argue that the better option would be a wool fire blanket. They're cheap, highly breathable keeping you cool in the summwr and warm in the winter, wool is naturally water and fire resistant, and with a penannular broach can be styled well over a dozen ways. I've been using one with viking kit for years as it's close to what they would be used for historically

@Lukiel666

2 жыл бұрын

@@hyperguyver2 Sounds like my Scottish great kilt. Except for the cheap part, sigh.

So, I was just at a LARP last weekend (NERO Armonia, in Nova Scotia), and one thing that my character used a fair bit of was candles. (Candles of various colours can influence spirits in various ways). I was just using birthday candles, because I couldn't find coloured, unscented candles, so I think that Candlemaking could be a really neat skill!

@3vanguardofthephoenix335

11 ай бұрын

It's so easy! Materials: - candle wicks - beeswax -essential oil of choice for scent -food coloring for your larp character - pot to melt (Low temp) wax You can put the candles in glass jars if you prefer that style of candle, or you can just dip the wicks, let dry for 30 seconds, repeat!

That's pretty badass. I don't need Ranger Cloak for anything but now I want one.

Pro tip for those making ruana-style cloaks. For the slit you’re going to cut, pick up some linen edge tape to go around the entire hem of that slit to give it some stability and strength. Especially if the end of the slit is curved where it will sit against your neck

3:16 "one of the more versatile cloaks" _laughs in great kilt._

@SkillTree

2 жыл бұрын

LOL. It is true. The great kilt IS king from what I have seen. Really cool piece of kit.

@thomphan9518

3 ай бұрын

insertmeme: why not both?

My son and I have had this plan for a couple of years now, the only difference being, we want to make them out of wool army blankets. They're near-water proof, and better against the skin. Also, if we were to make a more lightweight summer cloak, we were thinking of using NightHawkInLight's silicone sealant. It's basically just diluting standard silicone caulk like you'd use around a sink / shower surround, and soaking the fabric in it after dying. Not exactly period-authentic, but still....definitely waterproof.

When you mentioned rolling around on fire an image popped into my mind of a red dragon perking up as soon as it saw the ranger in the cloak "oh, look a walking candle, how cute..." Ranger: "a what?!"

Wool is more naturally waterproof, especially in a more raw form with the natural sheep tannin's and is also quite a bit more fire-resistant. You can get some pretty light wools aswell, it's not a winter only material. Though the issue then is price, wool is usually quite a bit more expensive than other (specifically) natural ones with few exceptions, probably more-so in the US where you have far less Sheep than the UK for example

@DrachenGothik666

Жыл бұрын

Sheep don't produce tannins. Plants do. A sheep's skin oils are called lanolins.

@travisbdub4952

8 ай бұрын

Also wool will keep you warm in the middle of winter outside even when the wool is wet. Cotton will make you freeze to death.

@shoopmahboop1374

8 ай бұрын

I wanna get a huge length of wool cloth to make a great kilt

@anblueboot5364

4 ай бұрын

@@shoopmahboop1374 how did it got?!

@keysersoze3427

2 ай бұрын

Saw a good video by a guy called fandabadozie that covers this with Scottish traditional clothing. Good wool witha tight weave kept highlanders dry.

down here in Australia, a bought waxed cloak costs around $150-$200AUD! Reckon I'll be following your method, so thanks for this Ol' Mate! Good Adventuring.

I don't LARP or craft and I already know this channel is my new favorite thing for reasons unknown

Old reenactors trick for waterproofing natural fabric tents if you don't want to use the beeswax route: try looking for tins of wall/brick water proofer and paint it on. It's the same stuff as those cans of fabric water proofer and a lot cheaper by volume. You'll need to let it air to get rid of the vapours but it works really well. Short apocryphal tale; We did this to our tent, but tried using a spray bottle to get an even coverage. At the end of the session, hubby found he couldn't taste coffee as the waterproofing aerosol had got into his mouth and the coffee just didn't touch his tongue at all. This is why I recommend using brushes, 'cos you wouldn't want that in your lungs... Alternatively look for Teflon coated cotton twill, the same stuff that they make school trousers out of.

@richeyrich2203

Жыл бұрын

All those products are highly toxic and terrible for the environment. They work, but we should not use them when avoidable. Better option of going non-natural/classic would be to dilute 100% silicon in a solvent and paint that on heavily, let dry. Then it’s waterproof and flexible.. and anti-slip😂

@fauvecorrigan1233

Жыл бұрын

@@richeyrich2203 She got me at "Alternatively look for Teflon coated cotton twill, the same stuff that they make school trousers out of".

@richeyrich2203

Жыл бұрын

@@fauvecorrigan1233 damn. Even missed that. Are my Levi’s really Teflon coated? Or rather, she probably means the DWR that comes on many new synthetic clothing items.

@fauvecorrigan1233

Жыл бұрын

@@richeyrich2203 I have no idea. I never heard of it before. It sounds like it should be illegal but, you know...

My favourite part of Maker life is randomly finding out the names of things I've coveted in sketchy facebook ad thumbnails and random pinterest boards for strange aeons but never known what to google. Ruana cloak! Thank you _ever_ so much! So, how did your cool and breezy lightweight cloak go in that summer sunshine... over the three other layers you're wearing? :p

@SkillTree

2 жыл бұрын

Shoot some of that thanks over to the channel Living Anachronism. That's where I learned about the ruana and, besides, it is a REALLY great channel! As for the temperature. I Quickly shed my armor LOL. The cloak DID come in handy during an absolute downpour though.

@sashmiel6566

2 жыл бұрын

@@SkillTree How did it hold up in the rain (how wet did you get?)

It's essentially a giant candle, which definitely buys you several seconds compared to a burning untreated cloth.

I was recommended your channel by Larp Shire as to look into what LARP is after I saw their video on the Reckoning. Tbh it sounds pretty neat so tips and tricks like this are both interesting and informative. Though from what I've seen from their official website the Rivlans aren't half as cool as the Hadrians. Maybe something that could be seen for a future idea for DYI larp stuff, perhaps a sack or container that you could carry on your person as a first aid kit. Outside of a self sufficient ranger needing to always carry an extra bandage in case of danger, you never know irl if you need to get some immediate help in case of an accident in the woods. One should always be prepared.

@SkillTree

2 жыл бұрын

I LOVE Larp Shire. Such a great group of people. Thank you for checking us out. I love this idea! Something I will add to the list for sure!

On the subject of burning the waxed canvas. You basically gave a candle wick. Candles really burn the wax, it’s not the wick that gives it fuel. The wick just provided the flame a spot to chill as it slowly eats the candle

@SkillTree

2 жыл бұрын

So, what you're saying, is that I am basically a human torch now 🤣

all the clapping gave a me chuckle each time and it just made things easier to stay focused on paying attention lol

I highly recommend that people make wrap pants for larps. They're great for NPC's because they fit lots of body types, but they're also great looking and easy to customize. One tip though, make sure to add a buckle to something to the ties because you do not want to rely on a simple not to hold the flips. Last thing you need is to be going through the brush and have a branch catch one of the ties and suddenly your butt is exposed.

@howarddavis8369

9 ай бұрын

My butt is always exposed. Usually due to having opened my mouth.

This project is so simple and effective that I truly think I will use it! It’s so easy to remember and I will have no trouble doing it at home. Thank you for this! If I do end up making my own cloak, I shall return to thee and tell of my mighty adventures and spoils.

Made one of these from wool after seeing this and living anachronism videos about ruana cloaks. Now I'm working on a duck cloth one for the warmer season. So much hemming!

I made one of these cloaks with a wool blanket. I have a great improvement to the cloak. The plan is to use 4 x 1.5" x 1" pieces of leather and cordage as a closure system for the collar. My plan is to sew 2 pieces of the leather straps about 1/2" or 3/4" in the corner of collar and center line on both sides. Punch 2-4 holes, I'm going to use three in the center, to lace the cordage how you like to keep the cloak closed at the collar. This will keep the cloak from getting in the way. Now when tied, I'm right handed, so I take the left side and secure it with a belt keeping the edge just right of center pulling it flat across my left side. Now I can drape the right side over my left shoulder and also use it as the hood. I found doing it this way the cape won't interfere with cross drawing my sword and if I use a shield the cloak will now disguise where my drawn sword is when in battle. Also I can draw a dagger with my left hand covertly for dual wielding. When not secured it'll add a pop of color and you can fold the ends open kind of like a suit coat does. With the one side secured in the belt and unlaced, you can take the right side off your shoulder and drape it over your right arm like toga, lol. For the archers out there is another mod that could help y'all out. Take another two pieces of leather and sew it on the back of the cloak slightly above the waist and left hip area. Cut a slit wide enough to get your quiver sling through. This will allow you to keep your cloak still drapee and keep your quiver secured to your back. This will allow you to draw and fire your bow with no to little interference from the cloak. You can also do this if you like to carry your sword on your back. For the duel sword wielders out there just take this mod and add one on the right side as well to secure your scabbards. I apologize if this post is a little long. I'm just trying to make sure you can picture what I'm picturing by being as discriptive as I can. Thanks and sorry again... Party on

If you are really concerned about flammability and fire you can buy fire retardant spray for fabrics. We use it when making our own Guillie suits. Keeps the chance of combustion down.

I do primitive camping and survival as a hobby I spray my wools with Forcefield Fireguard to keep campfire embers from burning holes in them. little smelly but effective

Thanks for the easy tutorial! I can’t wait to give it to my husband for his birthday tomorrow, he’s been wanting one for forever.

One advantage of leaving it as a poncho is, especially if you add a way to cover/close the hole like a hood, you've got a tarp you can use as an emergency shelter too.

For our friends outside of the US two yards is 183 cm.

This is awesome! What a great project. Thanks for the bonus burn tests

I love that all your videos are related to a character! It's really motivational!

did the same thing last year for my ren faire cloak. harbor freight canvas drop cloth slit down from and hemmed for a raanan cloak. works great.

If you have enough fabric leftover from the off cut, you could add a hood. I do love a ruana for its versatility.

I just made one of these for Halloween/D&D and it was super easy, budget friendly, and looks great. Thank you!

I've seen a few videos where folks have used caulking material that's been dissolved and then the material soaked into it and allowed to dry. Functions much like cloth but waterproof and not stiff.

I cant speak for the USA but here in UK we have a product called Dylon. You just put the open dyepowder container in the washing machine with your fabric and put it on a standard wash. Et voila! Take it out and dry it just like laundry. Oh, and run the machine on a rinse cycle afterwards to get any residue out before using it again for regular laundry!

That’s a really beautiful cloak! Thanks for the upload.

I also ran through the woods as a Ranger in LARP, used the inspiration of RobRoy movie (it was new then) to make a great-kilt which is a style of kilt, the full length version not the little skirt everyone calls a kilt. When you want a cloak or hood you unbind the length over your shoulder. Slept in it outdoors once in an overnight event. Miss it now that I’m talking about it.

That cape design is one of my favorite patterns!

wow, thank you! This looks really good and easy to make. I will definetly try it!

Dude, I have been binge watching all of your videos lately. Love the Stuff you come up with! Keep up the great work!

Please let us know how the cloak holds up in rain! With the openings for arms, and the front, I've always had some concerns about a ruana cloak not having enough coverage to be comfortable in the rain. Regardless, this looks awesome!! you've convinced me to make one. More cloaks are always a good thing. Also, consider a separate hood/cowl, loads better than attached ones.

I've made several of these cloaks and wear them all the time and I'm just now learning about the hood part!!

I've only done a small amount of homemade waxed canvas, but instead of the iron I found it rather easy to lay down paper towels on my work surface and then hit the cloth with a heat gun. It helps melt and evenly distribute the wax through the fabric, and the paper towels on the bottom catch the excess and then become great fire starting tinder later when you are outside.

4:05 A fabric pizza-cutter? What a time to be alive :D

@Skill Tree I have a few questions about the cloak. 1. The canvas tarp i bought is already dyed green and weather resistant. Will it require wax treatment too? 2. Have you had any trouble with washing your finished cloak? Is it still machine washable? 3. Can you give us a video showing us how to make a separate hood to go with it? I know you said you could make one with how you wrap it, but having a attachable one or even just one that sets over your head and shoulders would be a useful option.

Maybe you should try batik next! Basically it's using the wax as a resist so you can draw patterns on the pre-dyed fabric. If you're making another waxed cloak you don't even have to remove the wax when it's done, just add more to make it even.

I cann see using this for some practical things, not just for larping! Super nice, well finished 💪💪

I have friends that larp, and wanna make something for them for Xmas, so I watched your video … not only easy to follow, but very amusing! Thanks for the design and for the laughs!

Cotton is the best cloth material to be wearing when it catches fire. I'm a welder and that's what we wear so we don't catch fire. It just kind of smolders.

Dang, Cl3ver! I am loving the aesthetic! May your blade remain ever sharp, and your wit even sharper!

@vikingskuld

2 жыл бұрын

Hey kind of new to the channel and saw you didn't have many likes or comments. So I dropped in to say thank u for your work. I appreciate what your doing it and how your going about it. One thing I would ask Is would you do a couple more cloak vids where you make another style or two. Maybe a formal looking cloak and a heavy wet weather cloak with tar like they used to use for wet weather gear in the Civil War Era. Just thought it might be interesting. Thanks for what your doing I am sure I can safely say many people appreciate your work. Thank you

To help with applying the wax, if you heat the canvas with an iron or a heat gun/hair drier FIRST in small areas, the wax takes longer to cool and allows for better saturation. Personally, I like to use a heat gun, the kind that gets hot enough to strip paint. Warm the area of canvas so it is hot to the touch, apply the wax and continue to heat the area already waxed for the most absorbtion of the wax into the cotton fabric. Repeat as necessary until wax is no longer absorbed. Good luck! There are more modern ways to achieve "waterproofing" using silicone caulking and acetone instead of bees' wax mixture as this is very expensive where I live. Cheers.

Yo! I'm setting up a workshop in the woods, and am now bribing my friends with custom cloaks to help me. Thanks so much for this!!!!

That cloak is amazing its so cool, i don't even larp and i want to make one. But I'm already thinking of an idea that would make great use of this. Thanks kit

Awesome idea and vid! Thanks. Now if only my harbor freight will finally stock their canvas tarps… Side note: I’d suggest linseed oil and turpentine to waterproof canvas (for long term waterproofing) but it does require some curing time outside in the elements. Townsends did a wonderful vid on waterproofing canvas. The problem with beeswax and paraffin is that one (flammable test) it’s a sustainable burn. Think candles. And two as you wear it or use it that wax will wear off (it’ll take time so for one event probably okay) and if you’re wearing it that wax will seep into all your other textile clothing. Also please don’t put waxed canvas or Heavily waxed clothing anything into your washer and dryer. You will clog your drain and any waxed lint is SUPER flammable. And yes I do know that Clever washed and dried it before waxing. It’s a future reference kinda thing.

@cameronflack2254

2 жыл бұрын

For a "slightly" less natural way of waterproofing that isnt waxy, nighthawkinlight recently did a great video using silicone caulking and a solvent (mineral spirits i think) to make sort of a rubberized canvas. Check him out if you havent already

@Jaeler9

2 жыл бұрын

@@cameronflack2254 interesting! Thanks!

@SpamMusubi308

2 жыл бұрын

Also check out the painting supplies section in your local DIY(Home Depot, Lowe's) store and Walmart Superstores( usually best price) for canvas/cloth painting tarps

You are truly amazing,thanks for sharing!

This is so cool! I once saw a water proofed viking hood, super cool. Now I can make one myself and can have a cloak too 😍👍 thanks kid!

That was a cool video. Informative and useful. Cheap waterproof gear is always something that is needed.

Awesome video, and i love this simple cloak idea. I just bought some a robe/cloak type garment for renfest, and its way to hot for summer use. But i did sew pockets into it. Lots of them!

I just made this out of fleece without any waterproofing or sewing. ("Just made" meaning "finished a few minutes ago.") It is basically a warm, comfy blanket that will stay with me on cold mornings around the house, plus no sleeves means no armpits, so it won't need to be washed nearly as often.

@benkayvfalsifier3817

Жыл бұрын

That is a great, practical idea.

@k98killer

Жыл бұрын

@@benkayvfalsifier3817 just proved its usefulness stargazing outside in the cold wind. Can also just use it as a blanket. Quite happy with it.

Very cool video! A little heads up from a guy that has been running a waxed jacket for motorcycle adventuring for many years - if you hot iron the wax too much, it will soak into the fibers, but leave the surface exposed / relatively unprotected. Wax needs to sit on the SURFACE of the cotton cloth to prevent wicking.

I've only been to one larp. You can in fact be a badass ranger without a cloak.

I am SO into these medieval themed videos bro. Lol so awesome 😁🤟

It’s so funny that someone else found a similar use for this dropcloth. It’s what I made my complete Obi-Wan Kenobi robes out of. Also this build looks great!

Great thing for camping or fishing, gunna make one of these and store it in my vehicle.

i love this. exactly what i was wanting. great vid too, very entertaining. 🤙🏼

I use the Harbor Freight canvas drop cloths myself, but if you are going to use expensive beeswax at 12 dollars a pound, maybe consider using wool cloth. Wool doesn't burn well and resists water. If you know where to shop you can get wool cloth in a variety of colors for 15 dollars a yard.

I've already got a canvas cloak for my character, now I'm slowly assembling a whole leather armor set in order to return back to LARPing in the coming future!

@SkillTree

2 жыл бұрын

I hope you show your whole kit when you get it together!

About to make these for my partner and I, so excited!!

This was pretty awsome man, I am glad I stumbled upon your channel. 🤣🤣🤣 killed me with "don't be stupid"

Your LARP videos are always amazing!!!

Okay awesome! I've been trying to figure out how to wax my soviet Plash-Palatka and this looks like a really effective method! Thanks so much!!

Love the design of the cloak! Looks very versitile!

Wow. Im loving the new videos, keep it going

My fiancée and I are going to RenFest this weekend and we're wrapping up our costumes this week. She's doing a fairy (more Sidhe than Tinkerbell) while I am doing a bard with some influences from her costume. My sash is going to be made from the same material (read leftovers) from her skirt, and we made matching flower crowns the other day. I made a frog for my sword earlier today from leather and paracord, and we're going to do my ruana cloak in the morning since there's a chance it'll rain while we're there.

Funny enough, I had the same project in mind, even had the same tarp scoped out. the design was the hang up, but now that is solved! thanks.

Love your channel, inspired me to start making things just finished my ranger cloak or rouna cloak and made a small leather bracer. Also found out wood stains works for staining leather somewhat decent. I would like to see you make ink.

That closk looks great! Goiter job! Subscribed! Now to see how you made the leather bits. It's all great.

Very cool cloak, I love the way you cut up wax I never thought of a chisel, it looks much easier than the grader I normally use. next time I wax bottle tops I'm going to have to give that a try.

As what is called a burner or heavy torch operator as some call it, I'm around +2,000 °F every single day cutting huge steel coils and thick plates with a 4ft hand gas axe torch. And while I wear thick leather in most areas I wear pure cotton canvas in others because while yes it is still flammable...it smolders instead of burst into huge hot flame that literally literally bonds to your skin if you use other fabrics. When I was a welder we would wear 100% Cotton shirts due to it not bonding to the skin if it did catch flame and it's also harder than you think to catch it a flame from just sparks, and molten chunks. Even if it does it usually only smolders that area it hit but never fully catches up a blaze.

Really dig this alot! Great work man!

@SkillTree

2 жыл бұрын

Thank you! And thank you for being part of tge Fam for so long. I really appreciate your support!

@dragonscaskentertainment5139

2 жыл бұрын

I love the energy and the idea I've just learning! I'm looking forward to seeing if you do anything with laser cutters. I love mine!

Definitely a project I would like to do...Thanks!

This was pretty cool. I would probably just use scotchgard, personally, since it's only about $20 for a couple of cans on amazon, but I do admire you went through the extra trouble of going the all natural route.

@kaizen5023

Жыл бұрын

Bro do you have any idea how much Scotchguard that would take to make it waterproof? A LOT. Not to mention all the aerosol and fumes. Wax is a way better option.

Borax is a flame retardant that can be mixed with final rinse water of dying process. While wax will still light and wick actual burning of cloth should be slowed greatly.

An alternative to using wax is to use silicone (just cheap silicone caulk will do) diluted in naptha (ie mineral spirits). Nighthawkinlight has a great video on this. The result is a bit heavier, but it also strengthens the fabric a lot. Waterproofing is unparalleled - and super stain resistant also. Silicone is pretty amazing stuff. But I have to say I love the authentic looking fold-lines you get from wax for this type of use. It really puts it over the edge for a cosplay.

Looks awesome!

This is amazing, I am glad I stumbled across this one.

@SkillTree

2 жыл бұрын

I am glad you did too! Welcome to the channel!

THIS IS PERFECTTTT exactly what I need to make tonight

Very nice video! We made several cloaks for a short film of ours using drop cloths from home depot! Harbor freight is also a good location, also check Walmart, as ours carries some as well. The ruana cloak is a very good idea and super easy to construct, genius! love the ingenuity. If anyone is looking to make a cloak out of drop cloth and wants to keep the off-white color, we would still recommend putting it in boiling water, as it basically makes it more flowy, in a manner of speaking. Drop cloths are an underrated form of cosplay/larp material! Excelsior!

Silicone caulk dissolved in acetone is a modern way to wax cloth. Night hawk in light did an amazing video on it. It won't have the marble look that wax does so it's an option for people who don't want that

Looks great! I haven't larped before, but always thought it would be very fun :)