Hope you enjoy my video. Thanks for watching! 😊 Subscribe and like it. 😘

@ahmedbadhur

4 жыл бұрын

Subscribe to my channel if you want to see more cool DIY stuffs like this. I make DIY videos every alternate days 🔥 Thank you ! You're Awesome !

@DiyResinArt

4 жыл бұрын

😍😅😍

@Dragionex29

4 жыл бұрын

I have a question about the sanding, do you do that with all resin work? I’m fixing to start my first one and I’m starting small before I do my main one so I just want to make sure I’m doing everything right. Any advice would be very helpful,thank you.

@DiyResinArt

4 жыл бұрын

@@Dragionex29 Yes, do that with all resin work :) goodluck to you

@DiyResinArt

4 жыл бұрын

@@Dragionex29 There are many ways to polish the Resin surface, I do most often use sandpaper and make like this video

For all who want to try epoxy at home: Please be generous with the super glue. You do not want to wait days in hopes you can peel it off of the ground. Also make sure not to stir your resin too hard to prevent bubbles and make sure there's a decent temperature. At room temperature or a bit above (I recommend a short water bath) the resin becomes more fluid and will let bubbles out more easily. Also before you pour I'd recommend to quickly use a lighter on the surface to pop existing bubbles. Most resins give you more than enough time after mixing so take a breather. Also don't be too hasty to release it from the mold. It might look strong enough or the surface is touchable but even slight pressure can still curve or dent your piece. Try to make a bit of a sealed part because it dusts like hell when sanded, a drop of water prevents that a bit. And for the love of god please wear face protection if you sand it. It's horrible to breathe in and your piece is not worth your health.

Wish you talked and explained what tools you used, where you bought them, how you’re using them and explained everything step by step, with words, too

@DiyResinArt

3 жыл бұрын

Thanks for your suggestion 😃

@emilyscott1372

3 жыл бұрын

sander... drill with mixer attachment tool and the first she was using liquid tape ... and a mold

@andymccardleofficial7615

2 жыл бұрын

@@emilyscott1372 but whats the pressure thing & whats it used for please?

@TheGr8Cahooty

2 жыл бұрын

@@andymccardleofficial7615 it’s a vacuum chamber/pressure pot, and is used to take the bubbles out of the epoxy before it’s poured (in this instance)

@andymccardleofficial7615

2 жыл бұрын

@@TheGr8Cahooty thank you :)

Love the homemade vacuum machine. Really took out all those bubbles

Incredible video. This is exactly what a beginner like me was looking for. A whole project being built from start to finish with excellent detail. Thank you so much.

@DiyResinArt

3 жыл бұрын

Thank you very much, if you need anything just ask me, I'm ready to help

This one is really, really, really, really beautiful.

@DiyResinArt

3 жыл бұрын

Thank you very much, your comments helped me try harder in the next videos 😀

So pretty! Though one thing that would be really cool for the lamp ones would be if they could get showed in the dark as well. They look so awesome in the light it just makes me wanna see them lighting up a dark room! 🙂

@DiyResinArt

4 жыл бұрын

😍 Yes, I really like this purple color, it's mesmerizing

I never would have thought of using popsicle sticks to mix the resin. That is genius. This was a really cool project! Now I know what to do with all that root wood laying around my backyard.

@DiyResinArt

3 жыл бұрын

Thank you! Cheers! Please make great products 😁🤗😍

I've thought bout trying Resin as a craft but I live in an apartment, right now and figure there is a lot of safety to consider. Stuff like you make is so beautiful, I hope I have the chance to try making something, someday.

@DiyResinArt

3 жыл бұрын

Thank you so much, try shaking hands from small objects and wish you success 🤗😍😃

Remarkably beautiful - right down to the colors/hues used ... I LOVE it!

@DiyResinArt

3 жыл бұрын

😃😍😁🤗 Thank you very much

@LillianKüstenfeuer

Жыл бұрын

@@DiyResinArt Looks like amethyst! ♥ Thanks for sharing

I cant mentally process how beautiful this is

@DiyResinArt

3 жыл бұрын

Thank you so much 😁😍🤗😀

Es como una postaldel origen del universo! Hermoso trabajo.

@DiyResinArt

3 жыл бұрын

Thank you very much 😃😍

Very good ! Beautiful ! Eu pinto carro ( car) e essa sua tática é das melhores !!! Parabéns !!!!!

@DiyResinArt

3 жыл бұрын

Thank you so much 🤗😁

Very beautiful. I just love resin art. Glad I found ur channel.. Please mention the materials used that will be very helpful.

@DiyResinArt

3 жыл бұрын

Thanks for your comments, I will take note of this, Thank you my friend 🤗😍

We deserve to see that lit in the dark. Its beautiful.

@DiyResinArt

3 жыл бұрын

Sorry for the late reply, in the dark it was beautiful, thank you so much

Your are awesome, greate work 👍

Я бы с удовольствием купила ваши изобретения))👍 и не только я бы хотела бы купить) пользуйтесь своим талантом!👍

For some weird reason I like watching resin videos

@DiyResinArt

3 жыл бұрын

It was really mesmerizing 😍I like too

I wish you would explain each step verbally.

@chrissyshunda

5 ай бұрын

Ditto! Because I think he missed the step that didn’t show where he sealed the word with the black what is this still the word with???

Как же это красиво!!!!!

OMG,THIS LAMP IS SOOOOI BEAUTIFUL,NOW I REALLY WANT LAMP LIKE THIS!!!AMAZING WORK!!!

@DiyResinArt

3 жыл бұрын

Thank you very much, your comments will help me try harder in the next videos 🤗😍😁

Looks fantastic! I think the bubbles, especially when lit, gives it a nice touch of character.

You should pour in layers because even after vacuum sealing to remove bubbles you ended up with cracks and bubbles in the epoxy, just be more patient and pour it in several layers to be on the safe side.

@DiyResinArt

3 жыл бұрын

Thank you for comment 😀🙏

Good Job 👍

Ugh so many tools I don’t have....😰😅 it’s so beautiful, I love it ❤️🔥

@DiyResinArt

3 жыл бұрын

😅 Thank you very much

Damn! I want it! 😍❤️

@DiyResinArt

3 жыл бұрын

😍🤗😁 Thanks

Очень красиво, спасибо.

Aah … what a sense of peace🍃🍃🎍 Beautiful. Thank you

@DiyResinArt

2 жыл бұрын

Thank you very much 😀

This is amazing :) !!!

@DiyResinArt

3 жыл бұрын

Thank you so much 🥰

Good job. It would have been nice at the end to show what it looks like in the dark.

@DiyResinArt

3 жыл бұрын

thank you for comment 😀🤗😁

Really beautiful lamp and looks achievable for someone who is a little inexperienced to do.

@DiyResinArt

4 жыл бұрын

Yes, I have only worked for 6 months

Resin art most difficults are needs a lot of tools, nice work

@DiyResinArt

3 жыл бұрын

😃 Thanks

Looks nice. I also spotted a fracture in the resin. it is about midpoint up the long side. Part of it is from a point in the wood.

@DiyResinArt

3 жыл бұрын

Thank you so much 😍🤗😁

Awesome job. This looks super pretty. One question I got though, what type of material you used to make the mold for the resin? Thank you.

@DiyResinArt

3 жыл бұрын

I bought the Formex and stuck my logo decal on 😁😃 You can do it 😃 sorry for replying you late

3:11 was the best part of the video for me because that song finally stopped. beautiful work nonetheless

I loved your video I cant wait to see more of your work!!! I've never seen an epoxy lamp before!!!

Great lamp you got there. A small question just if I can ask it ..! Where do you buy this type of led light from. I really liked the design.

@DiyResinArt

4 жыл бұрын

Thanks you :D I use the led light in the USB led Bulb

What a beautiful design! A work of art!

@DiyResinArt

3 жыл бұрын

😃 Thank you so much & Merry Christmas 😍

@protohype7404

3 жыл бұрын

@@DiyResinArt Thank you - Merry Christmas to you too 🎄

Great vid!!!

How a beautiful piece of art. It looks like nature has came to you. Thanks for your hard work

@DiyResinArt

3 жыл бұрын

Thank you so much, your comments help me try harder in the next product 🤗😃

Some artists post links to where they get their supplies to make a project like this. I am particularly interested in the USB lighting. Is it USB, Amazon etc ?? BTW , i love your work :)

@DiyResinArt

3 жыл бұрын

Thank you for your opinion 😁🤗 Yes, it's USB lighting

It’s incredible how you made this perfect finish without covering one side with a tape while you making finish on another one! I always get smudges and some empty “puddles” even when the layers seems perfect at the beginning 😮

@DiyResinArt

10 ай бұрын

Thank you for your feedback, I have to try a lot harder to make the product better and better

This is like the show I watched where they said "The whole galaxy is now on your hands" its so beautiful 👌👌

@DiyResinArt

3 жыл бұрын

Thank you very much, your comment helps me to try harder 🙏😀

I'm no expert but it looks like the resin is getting too hot during curing and causing those big bubbly imperfections. Unless you are using a deep pour type resin you should try these bigger ones in stages, like 3 separate pours. Still looks good but if it was me that would really bug me.

@DiyResinArt

4 жыл бұрын

Yes, I see what you mean, I'm trying to fix that, and haven't found the right Epoxy yet

@CurrentElectrical

3 жыл бұрын

@@DiyResinArt You may have to pour in smaller amounts- most epoxy manufacturers will tell you the maximum height for the pour . For example FlowCast recommends pouring only to a maximum depth 1-1/2" at a time. You're learning and sharing your journey, thank you. Look for a "deep pour resin"- the setting time may take longer, but you will love the results with your projects. Until then , keep using the resin you have but do multiple pours- your outcomes will be amazing. What type of would is that you are using in your videos? I would like to find some local to Canada.

@SmileSoSmall

3 жыл бұрын

Current Electrical when you do multiple pours, do you let it set? Or pour some, get rid of bubbles, pour some more, etc?

@CurrentElectrical

3 жыл бұрын

@@SmileSoSmall I let is gel then pour the next layer to avoid the sight lines. Yourself? :D

@SmileSoSmall

3 жыл бұрын

Current Electrical so far I only did small projects where I didn’t need to worry about multiple pours 😅

This looks pretty good but you really have to tell us how to find wood pieces like yours!

@DiyResinArt

3 жыл бұрын

This's Pearl Grinding wooden, I don't know where in your country there is it, you can ask the wood mill😁😅

@faridprimar6028

3 жыл бұрын

u can get it in the aquascape store

@xmu69

3 жыл бұрын

Its burl wood. You can get it from wood mills

@pragyanpanda5719

3 жыл бұрын

Hindi me ye wood KO kya bolte hen

@freebobux3097

3 жыл бұрын

Go to carpenter shop

Fica muito lindo parabéns pelo seu trabalho

@DiyResinArt

3 жыл бұрын

Muito obrigado meu amigo 🙏😀

Nice work

This is so beautiful will done ,, i like epoxy's stuffs so much its amazing

@DiyResinArt

3 жыл бұрын

😍😃 Thank you so much, you just start doing something right away

@zozoapplleid5836

3 жыл бұрын

Diy Resin Art you welcome

@DiyResinArt

3 жыл бұрын

@@zozoapplleid5836 If you need any help please comment for me, thank you and Best wishes

@joysprig1800

3 жыл бұрын

Hi its very pretty , what is the white material you used to mould the resin called .

Where do you get the led lights to use for these. I’ve been trying to do research but no video goes into detail about the lights and I’m not sure where to start with those.

@DiyResinArt

3 жыл бұрын

I took them in a 5v USB led bulb 😀

Wow, what an amazing item you've made, beautiful

@DiyResinArt

3 жыл бұрын

Thank you very much 🥰

Just beautiful work. Love it!

@DiyResinArt

2 жыл бұрын

Thank you so much 😀

dear sir hope you are fine kindly we need to know the name of the epoxy material you use to make this amazing design

@DiyResinArt

3 жыл бұрын

Sorry for the late reply, I purchased Epoxy from a local, not international company, thank you 😃

You keep using the wrong resin to pour that deep and its heating up to much and causing cracks and bubbles. Need to pour in 3 layers with that resin or get a thick pour resin with better exothermic properties

@DiyResinArt

4 жыл бұрын

Yes, I'm looking for that Epoxy, the place I live in doesn't sell 😅

@kareemartin1800

3 жыл бұрын

What train is suggested

@AlejandroGonzalez-my4jc

3 жыл бұрын

@@DiyResinArt You should be able to get a river table resin delivered anywhere you live. You could ask AA composites in Australia as they manufacture it

@suzettekath9860

3 жыл бұрын

There is a fracture in the resin. It is about mid-point. And the way the lamp sits. It is about at the half way mark.

Thanks so much. this is very useful for me. 💯❤💯❤💯❤💯❤💯❤💯❤💯❤💯❤💯❤💯❤💯❤💯❤💯❤💯❤💯❤💯❤💯❤💯❤💯❤💯❤💯❤💯❤

Này làm đèn quán bar như mấy cái ghế ngồi feel theo nhạc đúng bay luôn. Làm kiểu như ốp ghế sofa cũng đẹp giống mấy chương trình đèn led nhảy á. Làm giả bộ xương khủng long làm giống mỏtor combat

@DiyResinArt

3 жыл бұрын

😍 Chuẩn bác ơi

@baothien6472

3 жыл бұрын

@@DiyResinArt được thì triển mạnh ey add

Gorgeous piece

Como se llama esa madera ?

@DiyResinArt

3 жыл бұрын

This's Pearl Grinding Wooden 😍😍

Hey can you wrtite down the materials you used? It would be a huge help

@DiyResinArt

3 жыл бұрын

Well I will note this 😀 thank you so much

naaaaa re zarpado negry

@DiyResinArt

2 жыл бұрын

😀

이뻐요 환상적이야

@DiyResinArt

3 жыл бұрын

Thank you so much, 😍😁🤗

I’m losing my mind over this. What is the foam sheet you used for the mold called? It has a plastic layer so it doesn’t stick correct?

@DiyResinArt

3 жыл бұрын

Yes, it is Formex, I covered with a thin layer of plastic 😃 thank you so much

Wow! This is a really magnificent piece and I like how it ended up as a result. However, there are a few things I personally think could be improved. 1. At the end, the led component dispersed light in a circular pattern and due to the stone/rocks positioning, the light was too bright in one area and not in the other. I think if you use a LED light with one beam of light going through the middle, or an LED with slightly lower luminosity, the light will disperse more evenly throughout the piece. 2. Gloves my dood :( 3. Instead of propping the resin onto the base and gluing it down, I think you can find a thicker base and carve the shape of the resin prism and then glue it down. I don’t trust things that are glued because if they take too big a fall, they tend to snap off from each other and blargh, money spent. Maybe it might help with light distribution too since light has nowhere to go but up. Overall, that’s it! You don’t have to take these things into consideration if my points are flawed or not possible. Good work! 👍

@DiyResinArt

3 жыл бұрын

Best comment I've ever read, thank you so much my friends😍😍

Absolutely gorgeous

So very nice, applause. Today I had an idea: make Christmas decorations with this concept. Why? Holiday decorations sometime look tacky(ugly) during the day- yet at night- the lights within the decoration bring life/beauty. Something like this would contribute to both day + night time appeal.

These videos make me feel inferior as a human. I can barely glue two sticks together without lighting the house on fire.

@DiyResinArt

3 жыл бұрын

😁😁😁Thanks for your comment

@CurrentElectrical

3 жыл бұрын

Change you mindset my friend, plan out your methods and you will create new wonders for all of us to admire. Oh, and post up videos of your work so we can learn from you as well. Happy Resin crafting. :D

"Easy Make"

@DiyResinArt

3 жыл бұрын

😁😍🤗 Let's start now, it will be easy, I've only been studying for 3 or 4 months

Hi, super,

@DiyResinArt

2 жыл бұрын

Thank you very much 😍😀

روعه تسلم ايدك 💜

@DiyResinArt

2 жыл бұрын

Thank you very much

He has some beautiful ass hands wow

@DiyResinArt

3 жыл бұрын

🤗Thank you so much

Absolutely stunning ,well done

@DiyResinArt

3 жыл бұрын

Thank you very much 😍😀🙏

This looks awesome. Really great work here.

Sei molto bravo ,mi piace l'effetto e il design 👍👍👍🤝👋😀

@DiyResinArt

4 жыл бұрын

Thank you so much 😍😍

Hi, friend!!! It's me Vitaly from Ukraine, if you remember me. I always watch your videos, I really like your work!!! God bless you and your children!!! You are a good master! You are very good at making epoxy!!! Keep going, it's very beautiful and very good!!! I love it!!! Good luck to you!!!!!!!!!!!!!!!

Amazing lamp 👍

@DiyResinArt

4 жыл бұрын

😍 Thanks you

Beautiful purple 💜 ♥ ❤ Great job!

@DiyResinArt

3 жыл бұрын

Glad you like it!

Thankyou for making this video ❤❤

@DiyResinArt

4 жыл бұрын

😍😁 Love you

отличная работа👍👍👍

Great Work 👍😍

@DiyResinArt

3 жыл бұрын

Thank you so much 😍😍😃

Интересный вариант!

@DiyResinArt

3 жыл бұрын

Thank you so much

Cantik sekali 👍 Salam resinners dari indonesia

@DiyResinArt

3 жыл бұрын

😍 thank you very much

Thats beautiful!!

@DiyResinArt

3 жыл бұрын

Thank you very much, sorry for replying you late 😅

Magical!

@DiyResinArt

3 жыл бұрын

Thank you so much 😍🤗😁😍

Beautiful, but may I ask did you make that box or did you buy it. If you made it could you show us how?

Wooow perfect projekt 👍🐒❤️🔥🔥🔥

@DiyResinArt

4 жыл бұрын

Thanks you 😍

❤️❤️❤️

@DiyResinArt

2 жыл бұрын

😍🙏😀 Thanks bro

Beautiful work!

@DiyResinArt

3 жыл бұрын

Thank you very much 😃

Very good, amazing

@thiagaotvvlogs4767

3 жыл бұрын

🇧🇷🌍🏁

@DiyResinArt

3 жыл бұрын

Thank you very much😃

Красивое!

Очень не дурно - впечатляет .👍👍👍👍👍👍👍👍👍👍👍👍

@DiyResinArt

3 жыл бұрын

большое спасибо 😃😁🤗😍

I NEED THIS NOW HEEEY I AM FROM BRAZIL YOUR WORK IT's VERY NICE

@DiyResinArt

2 жыл бұрын

😀 Thank you very much 😍🙏😎

Beautiful!👏👏👏

@DiyResinArt

3 жыл бұрын

😃 Thanks

Wow, that is beautiful

@DiyResinArt

3 жыл бұрын

😃 thank you very much

I love this ... I can watch all day

@DiyResinArt

3 жыл бұрын

Thank you so much, your comments help me make the next videos better😍

@EvangelistDavid

3 жыл бұрын

@@DiyResinArt Sir. Please let me ask this. Is it possible to make a big globe like waisted level high. With world map inside that glows??

@EvangelistDavid

3 жыл бұрын

@@DiyResinArt I also need your contact email and number. Mine is davidtitangoh@gmail.com WhatsApp contact telephone is +237678990196 will be glad if we get in contact

amazing art thank you for sharing

@DiyResinArt

4 жыл бұрын

Thank you my friend 😍😍😍

j'adore ce que tu fais. c'est grâce à toi que j'ai créé ma chaîne youtube !!!

@DiyResinArt

3 жыл бұрын

Great, wish you success 🤗😁😍

Elegant piece. Well done mate. Keep it up.

@DiyResinArt

2 жыл бұрын

😀🙏 Thank you very much

c est magnifique

nice job but i see its got tons of air bubbles . if i may suggest , i would suggest you do slow pours . by that i mean do about 1/8" at a time . let it settle for 20 to 30 minutes then repeat until you reach your desired amount you need . i do not suggest you doing full pours all at once . that's where a lot of air bubbles is reintroduced back into the resin . also putting your resin in extremely hot water for a bit also help to get the bubbles out . i hope these suggestions help

@DiyResinArt

3 жыл бұрын

Thank you very much for your comment, you are very much experienced

I can keep looking at it all day ... awesome work ! Can i ask you , 1 ) for a lamp with that size, how much resin did you aproximately used ? 2) How can you have the time to use the vaccum after mixing the hardner component in the resin without it start to solidfy ? Thank you in advance and keep it your amazing work !

@DiyResinArt

3 жыл бұрын

1) I use about 4kg epoxy resin for this lamp 2) Epoxy has a setting time of about 16 to 18 hours, in the first 3 4 hours it is always in liquid form 😀 Thanks for your question

That was pretty Brilliant 🤩🤩🤩🤩🤩

@DiyResinArt

Жыл бұрын

🤗 Thank you so much