Easy Fix | Garage Door Not Close ($100+ saving tip: ft. Diagnostic Code 4 & 6 Flashes)
Тәжірибелік нұсқаулар және стиль
#GarageDoor #NotClose #UpArrowFlash #LiftMaster #garageopener
/ usthoughts // Facebook Group - US Thoughts, US life/tips/howto
Garage Door Issue: how to troubleshoot when Up Arrow Flashes 4 & Down Arrow Flashes 6 times on LiftMaster
1. Clear all obstruction b/w sensors
2. Align both sensors correctly if LED color is not steadily glowing
3. Elevate sensors a bit up in location
Keyword: Recovery Sensors, Alignment, Obstruction
Manual link: embed.widencdn.net/pdf/plus/cg...
See page: 6 for configuration, 29 - Reversing Sensor Definition, #24 LED Color Check, #37 Diagnostic Code
Пікірлер: 67
So helpful! Mine was refusing to close and kept saying obstruction. Cleared all debris and cobwebs and wiped the lenses. It still said obstruction. Double checked lights and wiring. (Solid yellow and solid green). It still said obstruction. Double checked that sensors aligned, and they were to within 1/16 of an inch. Finally, I moved the sensors close to supports for the track to reduce vibrations (as video mentioned) and now it works perfectly! Huge thanks. Not sure I would have ever thought of it.
@BluebonnetU
Жыл бұрын
Great feadback!
Thank you. I never got a manual with my door.
Omg…. Thank you so much for this video. There is no way I could afford a service cal right now and this video solved my problem
@BluebonnetU
Жыл бұрын
👍
Thank you! I didn’t spend hrs to troubleshoot i just searched the error online and saw your video and fixed the issue in 10 minutes
@BluebonnetU
2 жыл бұрын
Great!!
Thank you ! After hours of troubleshoots with steady amber, green lights I was at a loss. I never would have thought to clean the lens thinking if the lights are steady I should be good. Couple of seconds with a damp napkin and thing works like a charm.
@BluebonnetU
3 жыл бұрын
Great!
@rorycraft5453
2 жыл бұрын
I just cleaned the lenses myself. Whew! Thanks Bluebonnet!
Thanks for saving me $130! You are awesome. Please keep up the good work.
@BluebonnetU
Жыл бұрын
💯
Thanks! Your video also saved me a call to the garage door repair people and a ton of money.
@BluebonnetU
2 жыл бұрын
👍
Thank you so much for your additional troubleshooting suggestion to wipe the lens! I was trying for hours and did not have flashing lights; I was at a loss. Once I wiped down the lenses with a Clorox wipe I found a small spiderweb and removed it along with some dust. Sure enough, that did the trick! Thank you thank you thank you!!🙏🏽🙏🏽🙏🏽
@BluebonnetU
Жыл бұрын
👍
This video is the 💣. Got me together in a matter of minutes. Thank you!
@BluebonnetU
2 жыл бұрын
Thanks. Don't forget to subscribe my channel!
Thanks worked like charm, had to adjust the height.
@BluebonnetU
2 жыл бұрын
😄👍
Much appreciated your share. Just cleaned the both lens and worked again 😇
@BluebonnetU
Жыл бұрын
👍👍
Thank you, my sensors needed cleaning, now it works like a charm
@BluebonnetU
2 жыл бұрын
👍😊
You saved my butt! All I had to do was elevate my sensors. ❤️
@BluebonnetU
3 жыл бұрын
Thank you for your feedback! Glad it helped you.
My garage door opener kept going up and down at various points - and had to hold the inside wall mounted button until it closed... I replaced BOTH Green light and Orange Light Sensors ($24) and fixed the problem. The Orange light is the primary sensor and the green light is the reflector. Then I moved both sensors higher so water/debris/bugs don't get into them or effect the wiring housing. Works fine now.
@BluebonnetU
2 жыл бұрын
Great work! Glad you fixed!
Thanks! This was exactly the problem I had.
Thank you for your video. You saved me a service call! God bless!
@BluebonnetU
2 жыл бұрын
😀👍
Thank you! I kept adjusting the sensors until they aligned properly. It took a few tries.
@BluebonnetU
2 жыл бұрын
👍
Back in action, thanks!!!
@BluebonnetU
Жыл бұрын
😄😄
You solved my problem.Thank you.
@BluebonnetU
3 жыл бұрын
Great!!
THANK YOU SO MUCH!😊
Worked for me, thank you for the video
@BluebonnetU
2 жыл бұрын
😁👍
Thanks 👍🏻 😊 moving my sensors up worked for me
@BluebonnetU
Жыл бұрын
😀
Thank you, saved me time and money
@BluebonnetU
2 жыл бұрын
👍😀
You saved my butt. Thanks man!
@BluebonnetU
2 жыл бұрын
😄
Thank you so much I was just panicking I couldn’t close my garage door after I was leaf blowing I couldn’t figure out what was going on!💝
@jesusanchorofmysoulkatheri3648
2 жыл бұрын
May God richly bless you for helping people!
@BluebonnetU
2 жыл бұрын
Good to hear from you now is Ok!
Very helpful. It was the alignment
@BluebonnetU
11 ай бұрын
👍
Helpful thanks
@BluebonnetU
Жыл бұрын
👍
Helped just had to move up the sensors thanks
@BluebonnetU
Жыл бұрын
👍
Thank you 🙏
@BluebonnetU
3 жыл бұрын
You're welcome!
My door try to close and then reverses on its own. Notices 4up and 1 down arrow blinking lights in the door closing device. They green and orange lights in sensor are on and not flashing, seems steadily on. Can no see any obstructions in between. I try to set with the adjust button but door wont go down more than certain exact level each time. Anything you can think of which can be helpful for me ?
@BluebonnetU
3 жыл бұрын
Sounds like a different issue than mine. Pls check the manual of issue code: what I found from my manual - Manually open and close the door. Check for binding or obstructions, such as a brokenspring or door lock, correct as needed. If the door is bindingor sticking contact a traineddoor systems technician. If door is not binding or sticking attempt to reprogram travel(refer to page 26).
Thank you. It was spider webs.
@BluebonnetU
Жыл бұрын
👍
Cleaned my lens’ oiled all the moving parts of the door and My led’s are solid I can force the door closed by holding the button down and the error code goes away it opens back up by pushing the button once but the error code comes back when it’s fully open looks like I might have to reach for my wallet 😢😢😢😢
@BluebonnetU
3 жыл бұрын
Hope you solve the issue soon!
@thecreamofthecrop2694
3 жыл бұрын
@@BluebonnetU update my sensors were slightly out of alignment the green led was on but flickered slightly upon closer inspection and after tinkering a bit with it I figured it out THANK YOU SOOOOO MUCH FOR THIS VID I WOULDVE NEVER FIGURED IT OUT WITHOUT YOUR HELP!!! Left you a like and subbed best part is it cost me zero dollars just a little time and patience lol 👍🏿👍🏿👍🏿👍🏿
@davidkimberling1468
2 жыл бұрын
Thanks for the video !! This was very helpful, very frustrated about our garage door and have got it working very well now. Thanks again.