Easy Fix For Low Toilet Water level

Тәжірибелік нұсқаулар және стиль

Complete List Of All My Favorite Tools - www.amazon.com/shop/everydayh...
This video will walk you through how to fix when you have low water in your toilet tank and also the bowl. In addition, I will give you some additional information on the water fill valve, fill tube, overflow tube, and flapper which will help you troubleshoot pretty much any issue you will have with your toilet.
Free Home Maintenance Checklist
everydayhomerepairs.com/home-...
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission.

Пікірлер: 917

  • @katlikegaming
    @katlikegaming2 ай бұрын

    Thirty nine dang years old and I'm only now learning how a toilet works, thank you. Great video, excellent explanation and execution. Clear, concise, and easy to understand.

  • @cindyw5457
    @cindyw54575 ай бұрын

    Thank you for posting such a helpful video! I'm a 66-year woman who was able to fix her own toilet without calling a plumber! Thanks SO much!

  • @EverydayHomeRepairs

    @EverydayHomeRepairs

    5 ай бұрын

    Here to help 🙌

  • @cowboyhoward1
    @cowboyhoward17 ай бұрын

    Amazing. I have been living with this annoying problem for a year and you solved it in minutes with the most clear and understandable video. Proves that an 80 year old guy can become a novice plumber with the right instructor....lol. Thanks so much. I have subscribed.

  • @Trefzger2000
    @Trefzger2000 Жыл бұрын

    Excellent video--so clear and concise that even this 73-yr-old grandma could follow. I'd been annoyed by the low water level in my toilet ever since the toilet was installed over a year ago, and I finally thought I'd look for a KZread video and see if I could fix it myself. Lo and behold, I did 2 simple things you suggested (clipped the little tube so it would pour into the vertical overflow tube instead of the tank, and turned the screw clockwise with a screwdriver), and the problem is solved! Thank you very much! You are a very good teacher!

  • @AvitalShtap
    @AvitalShtap Жыл бұрын

    I did it!!! What a fantastic day for my toilet, first it gets a makeover to remove all its rust stains and now it FINALLY fills to a normal level! Incredible tutorial - turns out my little water pipe was pouring water into the main tank insteD of the overflow valve. Amazing explanation!

  • @1taeok
    @1taeok Жыл бұрын

    Your advice worked! I bought a flapper, tank kit and was about to install when your video popped up and I decided to watch! Thank God I did! Prior the tank was empty leaving 1/3 water remaining. You saved me time & peace of mind!

  • @karencope5622
    @karencope5622Ай бұрын

    THANK YOU!! So clear and simple a 60 yr old woman with no plumbing knowledge fixed her toilets that even a plumber didn't figure out!!!

  • @leesalin6769
    @leesalin6769 Жыл бұрын

    Great video- thank you. I had replaced both the fill and the flush valve but was getting a running toilet. It was because I had the small tube way down in the fill tube without the clip. You explained that at the 4-minute mark and confirmed what my issue was!!!

  • @danielledetomaso2729
    @danielledetomaso2729 Жыл бұрын

    I live in an apartment and couldn’t figure out why I had so little water in my bowl. Made it so hard to clean! Opened the tank and saw the tube wasn’t even placed in the right area! Thanks for your help. You learn something new every day

  • @PaisleyPelican

    @PaisleyPelican

    Жыл бұрын

    This must be an apartment thing… same issue, solved!

  • @lindab.6245
    @lindab.6245 Жыл бұрын

    Excellent tutorial. It was clear and concise and the second option you suggested is what I needed! Thank you so much!!

  • @phineusphineas
    @phineusphineas2 жыл бұрын

    This is a quality simple to understand video. I shared it with my five children because it is mind numbing how many people have no idea how to troubleshoot a toilet like this.

  • @EverydayHomeRepairs

    @EverydayHomeRepairs

    2 жыл бұрын

    Nice, thanks for the support 👍

  • @MiTeeVideeO
    @MiTeeVideeO Жыл бұрын

    Sir, You have done a Professionalized, Precise, and a Clear & Concise job this installation. You have made the task clearer than the instructions included with the unit to me. Thanx. Howard

  • @jagonzales12
    @jagonzales122 жыл бұрын

    Thank you for your detailed instructions to fix a low tank bowl. God Bless you James

  • @citrinwarren6073
    @citrinwarren60732 жыл бұрын

    Clear and concise demonstration. You have made this operation much clearer to me, a home owner and a DIY. Thanks

  • @iwatchwithnoads7480

    @iwatchwithnoads7480

    Жыл бұрын

    After watching like top 10 videos in youtube search, this is the only guy that clearly demonstrates, even explains the technology

  • @captainamericaamerica8090

    @captainamericaamerica8090

    Жыл бұрын

    A BAD FLUSH 😧😧

  • @russpalmeri
    @russpalmeri Жыл бұрын

    I don’t usually like videos for home repairs. So when I did a search for the problem I was having with my toilet bowl I was ready to cancel it until I saw it was one of your videos. As usual, I was very quickly able to see that I have not set up the flow tube properly when I repaired the toilet last. the problem I’m having is gone. Best videos ever!

  • @davepatchen
    @davepatchen Жыл бұрын

    Best video of the half-dozen I watched about fixing the low level in the bowl. An annoying problem that I've put off for too long, now fixed. Thanks! Subscribed :)

  • @jadahoob99
    @jadahoob99 Жыл бұрын

    Very good video! I only knew about the rough adjustment. I didn't even know that there was a fine one. Thank you for the explanation. Camera angles, shot distance, and video quality was perfect! Thanks!

  • @stevespanos75
    @stevespanos752 жыл бұрын

    Very nice, thank you. I have to do this to raise the water level. Glad you took the time and explain how easy it is.

  • @ddgs07
    @ddgs07 Жыл бұрын

    Thank God for this video! I thought we had a plumbing issue that was causing low water to be in the bowl. Two simple adjustments found in this video corrected my low bowl water issue! Appreciate you for sharing your knowledge-We just moved in & I thought we were already gonna have to call a plumber…..thank you so much!

  • @khaleefax9553
    @khaleefax9553 Жыл бұрын

    *Subscribed in the first two minutes before video even completed.* *You are way too easy and light on the ears. Thanks!*

  • @peterprocopio2192
    @peterprocopio21922 жыл бұрын

    Great video, solved my low water in the bowl situation, learned something new today, thanks!

  • @MrPietropastore
    @MrPietropastore Жыл бұрын

    Great and very professional information. I appreciate the clear and simple lesson.

  • @Ratonyoutube
    @Ratonyoutube Жыл бұрын

    Thank you so much, this tutorial literally helped so much. My toilet's water level was low and it wasn't flushing properly at all, this fixed it super quick.

  • @JaiUneGuruDeja
    @JaiUneGuruDeja2 жыл бұрын

    Your videos are soooo easy to understand. Thank you, Sensei.

  • @bambamnj
    @bambamnj2 жыл бұрын

    One thing I didn't hear you mention is that there is a max amount of water that can be put into the bowl based on the design of the pedestal. That max water line in the bowl is determined by the "trap" that is built into every toilet pedestal. You can find out what this max water line is by taking a pitcher of water and slowly pouring water into the bowl, at some point you will hear water starting to flow into the trap and down your into your sewer line. once you reach that point, the water height in the bowl will remain any higher then that point. So you can pour pitcher after pitcher or water into the bowl, but the water line will never stay any higher than that point. Some bowls will hold more water than others, again based on the design of the toilet itself. I wanted to make this clear because no matter how much you adjust you can't make the water in the bowl any higher than that max point determined by the trap.

  • @humptydumpty9177

    @humptydumpty9177

    2 жыл бұрын

    Interesting, we don't have the fill tube here in the UK, the pan trap ensures there's always water left in the pan.

  • @waterheaterservices

    @waterheaterservices

    Жыл бұрын

    As a certified master toilet mechanic, [plumber], I endorse this comment.

  • @ppen62

    @ppen62

    Жыл бұрын

    You are right I purchase a new toilet early this year. I notice how low the water level was in the toilet bowl. Call glacier told them what was going on and was explained that the way. They are designed to conserve water now.

  • @truth6600

    @truth6600

    Жыл бұрын

    Its called the trap weir

  • @truth6600

    @truth6600

    Жыл бұрын

    True,higher than trap weir is just a waste of water.

  • @ELMS
    @ELMS2 жыл бұрын

    Very well explained. Easy to understand. 👍

  • @bonriver9420
    @bonriver9420 Жыл бұрын

    This is the best explanation so far of how things work in the toilet tank and bowl that I have seen on KZread. I have a tank that is filling way too high and now I know how to fix it. Thank you for this information. Just subscribed.

  • @ashwinikumar8797
    @ashwinikumar87977 ай бұрын

    Most recently, contractor had replaced entire toilet, but he did not know how to adjust water lever in the toilet bowel. This is an excellent video you have made. It is very cleaner explanation you have made it. Thank you very much.

  • @bobandes2016
    @bobandes20162 жыл бұрын

    You are quite brave to take on this topic with so many tank configurations out there and I'm just talking about in the USA. Nice job for a lot of the new toilets. Let's see some ball floats, rods, and things that break when you just look at them.

  • @bobboscarato1313

    @bobboscarato1313

    2 жыл бұрын

    Made in China!

  • @g.e.2900
    @g.e.29002 жыл бұрын

    Excellent instructions and easy to understand! This video is I exactly what I needed. Thanks for sharing your information with us all ❣

  • @EverydayHomeRepairs

    @EverydayHomeRepairs

    2 жыл бұрын

    You bet, happy to help 👍

  • @redbikemark
    @redbikemark Жыл бұрын

    Thanks for the information. I had low water in the bowl. After reviewing your video and then checking my tank I saw where the fill tuber hose was completely out of the overflow tube. I stuck the fill tuber hose back inside the overflow tube and the bowl filled to the proper level....Easy Peasy...thank you

  • @dw5518
    @dw55188 ай бұрын

    Some are better than others at reading those brochures. I personally like seeing it. Much easier than trying to comprehend text. Nice job.

  • @tonym6920
    @tonym69202 жыл бұрын

    Good tips, thanks very much!👍👍

  • @rickrys2729
    @rickrys27292 жыл бұрын

    Another great tip! Nicely explained.

  • @EverydayHomeRepairs

    @EverydayHomeRepairs

    2 жыл бұрын

    Thanks Rick 👍

  • @markmeng1242
    @markmeng1242 Жыл бұрын

    Very clear instruction. Much better than most of them on KZread!!

  • @chriskahlenborn2659
    @chriskahlenborn2659 Жыл бұрын

    patient and gentle and knowledgable!

  • @barrymilam9665
    @barrymilam9665 Жыл бұрын

    The small hose going into the overflow is called a hush tube, which most people don't know. Also when you replace the fill valve the correct height of the valve should be at least one inch above the overflow valve by code, yes that is in the code book. I've been a plumber for 50 years and stll doing it. You did a good job explaining the workings of the commode....

  • @jmgaz82
    @jmgaz82 Жыл бұрын

    Thank you! Maintenance person left out a step you covered! So helpful!!!!

  • @Johannir27
    @Johannir27 Жыл бұрын

    Thank you so much for this…my husband was about to buy a new toilet. Even though this is a new toilet (only a few months old). I saw your video and 😊wala now it’s fixed. Thank you so much for for making videos like this.

  • @gnic76
    @gnic762 жыл бұрын

    Nice tutorial, additional info.. be sure not to coarse adjust the valve tube higher than the tank so the lid can't hit it.

  • @brandova83
    @brandova832 жыл бұрын

    Simple and easy to understand. Gonna try this out, thanks!

  • @shanespence6128
    @shanespence6128 Жыл бұрын

    Wow, great video , explained everything I wanted to know about water level. I just installed a new American Standard toilet, and I guess from the factory they just install the components without having them set up for the customer. Using the American standard instructions seemed to be lacking. After watching your video, 3 minutes later the toilet has the correct water level, and is flushing awesome! Thank you 👍🏻🙏🏻

  • @gunfisher4661

    @gunfisher4661

    Жыл бұрын

    I installed an American Standard years back but the fill valve went bad this week. Opened the lid and all of a sudden realized it had instructions inside the lid to partially disassemble the fill valve and clean it if it had problems but mine was to far gone.

  • @alexsad24
    @alexsad24 Жыл бұрын

    Was able to find my solution in the first few minutes thanks to the great demonstration of the normal operation. Thank you!

  • @louc4130
    @louc41302 жыл бұрын

    Another reason to use the hose clip; is just in case the fill hose pops out of the tube when filling, blasting water up and around the inside of the tank, resulting in leakage down the outside of the tank. It' somewhat rare, but I've had to respond to leaks of this type many times over the years, with the homeowner not even looking in the tank to see whats up. Anyway, good video.

  • @drah9955

    @drah9955

    2 жыл бұрын

    Yes, leakage outside the tank

  • @hobbes5043
    @hobbes50432 жыл бұрын

    Thank you for this informative video. Since our last correspondence I have been able to access the main stack in my home inside the walls, and have been using that as a way to relieve myself while I wait for support. However it appears that sewer gases are exiting the pipe which makes me think there is a block in the vent somewhere. How would you fix this issue, if you were stuck inside a wall and didn't have access to normal tools? Thanks, Gary

  • @bobrub

    @bobrub

    2 жыл бұрын

    You would remedy that (sewer gas) by closing off what ever opening you made (or found) in your main wall stack that you are relieving yourself into so that the sewer gas cannot escape there but will rise to the top of the stack above the roof line and disperse to the atmosphere as all other stacks do.

  • @Blakberri323
    @Blakberri323 Жыл бұрын

    Thank you so much for this video. Could not figure out why the tank was full of water and the bowl was so low. Turned out the hose to fill was disconnected never would have learned about that had I not seen your video. I attached the hose and the bowl filled right up. Thank you for sharing your knowledge. God bless

  • @user-ce4rd2tw2b
    @user-ce4rd2tw2b6 ай бұрын

    just amazed at how clean these tanks are on these diy videos; thanks for the info

  • @notv2day
    @notv2day2 жыл бұрын

    The point is well made that giving the tank more time to fill, will in turn, increase the amount of water directed to the bowl. This is only true to a point. Ultimately, the max level of water in the bowl at the end of the flush is based on the elevation of the weir which is a function of how it is cast/molded. If the bowl is already at its maximum water level, adjusting the float will not increase the water level in the bowl, despite giving it more time to fill. As he states though, it will increase the volume of flush water.

  • @EverydayHomeRepairs

    @EverydayHomeRepairs

    2 жыл бұрын

    Good point and thanks for the help 👍

  • @tscook10

    @tscook10

    2 жыл бұрын

    Good point. If your flush volume is correct and your bowl hits that max fill level early in the refill cycle, you can look for a way to reduce the amount of flow going to the bowl, since that's just water being sent directly down the drain. I see this sometimes in toilets with really high water pressure.

  • @salamsangi426

    @salamsangi426

    2 жыл бұрын

    Hi i no that can't fix it how can I called you

  • @anusreesknambiar6818

    @anusreesknambiar6818

    2 жыл бұрын

    Pp

  • @cameronmcdowell1499

    @cameronmcdowell1499

    2 жыл бұрын

    The bowl level is also a weather barometer. In high pressure the water level is lower in low pressure higher to the level of the trap

  • @DarKANGEL269A
    @DarKANGEL269A2 жыл бұрын

    Lots of useful information there. I learned in hard water situations, that the fill valve seal is a much cheaper solution to replacing the entire valve. I have a toilet that, I’ve tried all the steps mentioned, but the bowl STILL has a low water threshold. I even blocked the tank from stopping the flow of water till the bowl was at a normal level, only to watch the water level drop back down. Even reseated the toilet in hopes that I had an air leak that allowed more water to drain through the trap way than normal. No luck. Replaced the seals between the tank and bowl as well, no luck. I am out of ideas.

  • @zahidshabir4038

    @zahidshabir4038

    Жыл бұрын

    Here in the UK its not even expensive to gut and replace the internals of a toilet at least I don't think it is since in my house we gutted and replaced the whole internals for like £30 (including a pipe that connects the bowl to the cistern and a huge o ring for it which is like 5-6 inches wide and the o ring was like 1cm thick and wide also it was hard to get a replacement because this is part of the flush valve system (and they came together) and this pipe for the toilet is hidden by the design of the toilet where the cistern looks like it is totally attached to the bowl from a distance and it requires a certain size of pipe because of the porcelain hole size inside this joint) we did this for 2 reasons as firstly we had a leaking cistern which would feed water in to the bowl which was hard to tell because a few drops going in is not easy to see especially when the water trickles down the sides of the bowl but I noticed this because I peed in the toilet before having a shower once and I forgot to flush it till after my shower and noticed the colour of the water had mostly cleared up (this was harder to notice especially due to the fact since hardly any water leaks the toilet is filling up fast enough to not make a difference in noticeable water pressure when flushing and looking at the fill level inside the cistern but with the ball valve connected to the toilet you could turn off the water supply and it would be empty within less than an hour) and when shining a light up to it you notice that it looks a little different where the water is flowing it would also look less shiny and look more dry when the ball valve was off and the cistern was empty. We replaced the fill valve with a new one also since the old one would occasionally jam and not refill the toilet since in the UK most of the water fill valves I have seen are different to that one you showed and when the tank is empty there is plastic thing surrounding the fill valve or a large button inside which drops down when the water level is lower and raises as it fills up (dont know the proper technical name) and would sometimes get stuck and/or just not go down at all when flushing and even when manually pushing it by hand to force it down sometimes it would spring back up. We got a new fill valve for like £10 and a flush valve for a similar price and got some other small parts and accessories for around £10 too the new system totally trumps the old one as you dont have to yank on a lever that will potentially get loose and damaged over time by yanking the handle like our old one did and the new system uses a button to flush the toilet that sits in the same hole as the flush handle

  • @supermills03

    @supermills03

    Жыл бұрын

    That must be a low siphon level on the upsidedown U pipe, you're stuck with the low water level unless you can get a different toilet with a higher U

  • @DarKANGEL269A

    @DarKANGEL269A

    Жыл бұрын

    @@supermills03 I felt like it was the commode itself too. Thats what I told myself when I finally threw in the towel.

  • @gunfisher4661

    @gunfisher4661

    Жыл бұрын

    I had a similar problem but when I replaced the fill valve it was all good.

  • @skaizun
    @skaizun Жыл бұрын

    Love the introduction to the parts. So many "instructional" vidz leave that out, presuming that the viewer knows what's what! Good job! :)

  • @ramones500
    @ramones500 Жыл бұрын

    Thanks for all your videos! Also the toilet has to be the most underrated invention of all time such an amazing mechanic and practicality

  • @ianmontgomery7534
    @ianmontgomery75342 жыл бұрын

    Good explanation. Its amazing the difference toilets around the world. In Australia our cisterns are dual flush so they are a bit different to the one in this video and the water level in the bowl is low - i imagine this is a water conservation measure as we have droughts and toilets in some country areas are filled from rain water tanks and you don't want to waste any.

  • @millomweb

    @millomweb

    2 жыл бұрын

    There's the 'back to front' ones in Germany and the 'hole in the floor' Asian type. Of course in the UK we just have the bog standard type.

  • @vanhattfield8292

    @vanhattfield8292

    2 жыл бұрын

    We have dual flush systems in the US as well with selectable options for flushing determined by what type of waste is being expelled. One reason that they are not as popular in the US is that it takes responsible people who will use them as designed because they are easily plugged by vandals simply by selecting the lower water consumption flush option which is not sufficient to expel solid waste. Vacuum assisted toilets are also an option but once again, it requires responsible users and the maintenence can be difficult and expensive to maintain and if a system is installed, it is diffiucult to revert back to a conventional system.

  • @bobboscarato1313

    @bobboscarato1313

    2 жыл бұрын

    Most modern toiles use 1.6 gallons of water; older ones use 3.0 gallons; they actually save water as the newer type needs to be flushed several times! If my memory is correct that environmentally efficient toiled was designed by one of the Rockefellers nieces!

  • @vanhattfield8292

    @vanhattfield8292

    2 жыл бұрын

    @@bobboscarato1313 Modern toilets work just fine. The reputation for "not" working came about when the reduced water consumption requirement was first initiated. Many manufacturers had not engineered new designs and had only changed the fill valves with a lower overflow that prevented more than 1.6 gallons from accumulating in the tank. Since the bowls had been designed to use 3 gallons, they failed to perform properly. The law that made the 1.6 gal flush a requirement went into effect 28 years ago on 01 JAn, 1994. Manufacturers haqve had plenty of time since then to redesign toilets to work efficenty and effectively. Residential toilets typically come in 3 styles, round bowl. elongated bowl and "special needs" (also called handicap). In most (but not all) cases, the design of the weir is slightly different on each style. The "round" bowl is most likely to have a reduced radius for the weir, making blockages more likely to occur than on the other two. The "elongated" bowl, is likely to have an increased radius and the "Special needs" toilet, which is an elongated bowl with an increased seat height, having the most generous radius for the weir andf is least likely to experience a blockage. Additionally "cheap" toilets are likely to have poor casting for the ceramic and imperfections in the glazing which can cause friction asnd reduce the flow of solids, resulting in blockages. I apologize for the length but I wanted to share all of the information in a single comment. Chears!

  • @bobboscarato1313

    @bobboscarato1313

    2 жыл бұрын

    I'm happy with my old toiled with 3 gallon reservoir! One flush does it! No baloney.

  • @cakekomo
    @cakekomo2 жыл бұрын

    Good video. Idea for a follow up would be 2 stage flush mechanisms, where if you just use the handle normally it flushes enough for liquid waste, but if you hold the handle down longer it does a full flush for solid waste.

  • @cakekomo

    @cakekomo

    2 жыл бұрын

    @@daviddou1408 I'm talking about the ones that still use the standard handle and do the same thing, but are depending on how long you hold down the handle.

  • @millomweb

    @millomweb

    2 жыл бұрын

    @@cakekomo That looks to be like the one in the vid. Ours has a min and max flush - depending on how long the handle remains held. You can get a flush anywhere between min & max.

  • @HalbertS-wt5hr

    @HalbertS-wt5hr

    2 жыл бұрын

    @@cakekomo These sometimes have a buoyant float on the flapper chain that holds the flapper open until the water level drops to a certain point, even if you let go of the handle. How do I adjust and/or modify to get a full flush every time, without having to hold the handle down? I'm not concerned with saving water, I just want a full tank flush without having to stand there holding the handle.

  • @tscook10

    @tscook10

    2 жыл бұрын

    @@HalbertS-wt5hr If yours has a float on the flapper, and it isn't staying open long enough to clear the bowl, then it could be that the flapper/float has lost some buoyancy or something. You should probably try replacing it with a new one that is the correct part for your toilet model. Quite frankly, I hate these float type setups. They tend to be super finicky, and really only work with the exact right part, whereas most other toilets you can buy one of the universal adjustable ones and find the correct setting with a couple of test flushes.

  • @HalbertS-wt5hr

    @HalbertS-wt5hr

    2 жыл бұрын

    @@tscook10 I don't think that's the problem. The float is part of the chain. The float keeps tension on the lower portion of the chain and holds the flapper open for flushing until the water level in the tank drops to a certain point (like 1/3 down), then the float releases tension and the flapper closes. Was this water saving feature required by federal regulation? Maybe if I can move the float lower down on the chain it will give a longer, higher gallonage flush, but I have my doubts as to if it's adjustable.

  • @tornticket8061
    @tornticket8061Ай бұрын

    Clear…concise…informative. Well done!

  • @cookwithshefali3368
    @cookwithshefali33686 ай бұрын

    Super helpful. Thanks so much. I was so tired of low water level problem. My house owner and my husband used their minds to fix something and created a new problem of low water level. Finally I could fix it myself

  • @tscook10
    @tscook102 жыл бұрын

    Great how to/general info. I think the one thing I'd contend in this video is that the tank should drain fully. Many newer toilets (like the 1.28gpf units) should only drop the water level by a few inches before the flapper closes. My rule of thumb is that the flapper should close as early as possible while still achieving the full bowl emptying. But the flapper doesn't need to be open until that point, and definitely shouldn't be open after that point. Also, yes the bowl should fill back to the trap level. I wish more fill valves were adjustable for the amount of bypass flow to the bowl

  • @millomweb

    @millomweb

    2 жыл бұрын

    Get a British toilet installed.

  • @bigred9428

    @bigred9428

    2 жыл бұрын

    They may be designed that way, but in my experience, they don't work that way. I've had to flush most newer toilets 5 times and more, and it seems like only a cup of water goes into the bowl, which just fluffs up the toilet paper, and I have to wait an eternity between flushes.

  • @a..d5518

    @a..d5518

    2 жыл бұрын

    @@bigred9428 I hold the handle down until the bowl is cleared, and that's only needed when flushing solids, otherwise a quick, normal push on the handle works just fine.

  • @vanhattfield8292

    @vanhattfield8292

    2 жыл бұрын

    You are using your own opinion to make an assumption to modify a system that has been engineered to work in a specific way. Most toilets function by using a syphon affect and modifying the amount of water that is introduced into the bowl when flushed will negatively affect that function and result in issues. The stoppers are designed to close when the water is at certain level and the added weight of the water that is applied to the stopper from the water that fills above it adds to it ability to seal. Very often service calls for issues regarding toilets not flushing correctly result in finding that they have been modified at some point and are not set to manufacturers recommendations.

  • @tscook10

    @tscook10

    2 жыл бұрын

    @@vanhattfield8292 I agree with you that toilets should be set up as they were engineered to work. I was specifically pointing out that in the video, he implies that the tank should drain fully, and that is not how newer toilets are typically engineered to work. The rule of thumb describes what correct flushing typically looks like, and is useful when you have no idea what components are in your toilet, whether they are correct or not, and want a sanity check on whether it's operating as it should.

  • @peterclancy3653
    @peterclancy3653 Жыл бұрын

    I live in Western Australia and the water level shown is about normal here! We were very water conscious about water conservation and toilet flushing is a major use of water, we even have duel flush buttons so as to minimum flushing fore either solid or liquid waste. Our state water authority publish information about this and other water conservation methods and many places use recycled sewage water to water public parks etc. These would be applicable to the USA South West which is in drought. This country have a very dry climate compared to most countries so people are generally very water wise!

  • @dsomlit
    @dsomlit2 ай бұрын

    Thank you for patiently and slowly explaining how it works. It's very helpful.

  • @MISFET
    @MISFET Жыл бұрын

    Thank you so much. I woke up at 3 am and my tank was not filling, but the water would not stop running. This video gave me a lot of relief, and I fixed my toilet. Going back to bed.

  • @vanhattfield8292
    @vanhattfield82922 жыл бұрын

    Great demonstration but something thing I would add to the tutorial is that the maximum water level for the bowl is determined by the weir that is disigned into the model that you have. The weir is a "trap" and can be seen by looking at the back of the bowl from the side. If your water level in your tank is set too high, or the gasket leaks, additional water will run into the bowl, but it will flow down the drain once it exceeds that maximum depth. An additional issue I have seen, especially on early models of reduced water flush systems, is that homeowners would increase the height of the water in the tank above the recommended level with the thought that increased water meant an increase in the effectiveness of a flush, but this is not norrmally true. The toilets are designed to creat a syphon effect to remove the waste and to self clean the bowl with the "swirl" that is created. Adding additional water above what the design calls for can reduce the syphon effect and cause issues with flushing efficiency. Using the manufactors instructions when setting the water height in the tank is always recommended.

  • @gopackgo4036

    @gopackgo4036

    2 жыл бұрын

    Excellent points. For some reason people without any training in engineering, and some plumbers for that matter, always think that more water=better when it comes to any appliance that uses water. How hard is it to just follow the instructions.

  • @schabowyBar

    @schabowyBar

    Жыл бұрын

    You are telling stupid things. There is no siphon effect in this toilet. A toilet with a siphon effect is first filled with water and then the water is drawn in. This is a normal gravity toilet. If you would like to see a toilet with a siphon effect, it is on every ship.

  • @vanhattfield8292

    @vanhattfield8292

    Жыл бұрын

    @@schabowyBar You might want to research what a siphon is. The "swirl" you see the water make as it decreases in size and exits through to hole at the base of the toilet is a siphon. It creates suction which pulls the water and solids out of the bowl as it discharges. The water from the tank is released at angles through separate holes under the rim of the bowl, called "siphon jets", specifically to create the whirlpool action which creates the siphon. That is who water is not discharged from the tank to the bowl in one big release. The water is released and gains momentum through gravity, but how that water is discharged creates a siphoning effect. Siphon toilets may very well be on ships, I haven't spent time on one so cant say, but without a doubt, your toilet at home uses a siphon effect to work properly.

  • @ctaylor7089

    @ctaylor7089

    Жыл бұрын

    @@vanhattfield8292 the holes in the rim of the toilet are not angled, the swirl occurs without assistance. Also, those are not siphon jets. A siphon jet toilet has an additional outlet hole at he bottom of the bowl that directs a jet of water directly through the trap. Not all toilets have them, those are called washout toilet. Also, a weir isn't a trap, but a specific part of a trap.

  • @dkhes1

    @dkhes1

    Жыл бұрын

    @@schabowyBar Or Airplane

  • @bunkerhill4854
    @bunkerhill48542 жыл бұрын

    Take care when deciding to reduce the amount of water per flush; that is lowering the water level in the tank. The toilet is designed to clear the bowl with a certain amount of water per flush, especially the solids. Getting the solids out of the bowl and well along the pipes under your floor takes a certain a amount of water. It is possible, to clear the bowl, but not move all solids far enough down the pipes. That’s the beginning of a backup. Note that the video recommended holding the flush handle down for a second or two to ensure all of the water is emptied from the tank. Reminding users of proper flushing can be helpful, especially children.

  • @avflyguy

    @avflyguy

    2 жыл бұрын

    My mantra has alway been..... If ya gotta crap, hold the flap (open longer)

  • @carmenreale5369

    @carmenreale5369

    2 жыл бұрын

    I have noticed cutting down the amount of water and using a heavier toilet paper tends to clog a lot easier! I always use scotch, real thin paper, when using the heavier paper definitely have to hold the handle down for a few seconds longerTo get that full flush otherwise it always jams up plungers always next to the toilet!!

  • @samuelmcqueen9013
    @samuelmcqueen90134 ай бұрын

    Great video, very clean, simple and easy to follow. Made me feel better about myself, I live in an old house that’s always having plumbing issues. Today, I didn’t have to call one. Thank you!!!

  • @ladyt2587
    @ladyt2587 Жыл бұрын

    Thank you so much for this video it was very helpful. I recently had someone work on my toilet this week and ever since then the water is low in the water bowl so I was wondering what happened so I went and typed in what I needed your video came up and I listened to what you said. What was happening was I was not holding the handle down long enough to let it completely empty so that it could completely fill up again once I did that easy as pie the water level in the toilet bowl is at the right level. 😊

  • @roadshowautosports
    @roadshowautosports2 жыл бұрын

    Appreciate the clear explanation! Also, do you have videos of older models? And, what’s your take on those foaming tablets sold online that claim cleaning the bowl instantly? I have an old Khole toilet that is leaking the valve inside the tank but not sure I’ll get the parts for it nor a whole valve. Whoever lived here before, let a thick crust form in the bowl that is dark and nasty, hence the question about cleaning it. If you have any solutions or suggestions, very appreciated. Thank you!

  • @vanhattfield8292

    @vanhattfield8292

    2 жыл бұрын

    If you meant to say "Kohler" then it can be easily and inexpensively fixed if you are mechanically inclined. A new Fluidmaster flush valve as shown in the video can be purchased for about $20 and the tank to bowl gasket can range from $3 - $10 and there is a difference. If you decide to fix it, use quality gaskets so you dont find yourself doing it again in the near future. An additional tip is that when reattaching the tank to the bowl. use EXTREME caution when tightening the bolts. Less is more, if you find that additional tightening is required, do it slowly and in increments. Overtightening will break the tank very, very easily. Do not tighten one side completely then move to the next, tighten one a little, then the others (depending on if 2 or 3). when the tank no longer moves serparately from the bowl, it is a good place to stop. To keep your gaskets from breaking down and distorting, which allows water to flow through, avoid usiong chlorine based tablets in the tank. The ones that attach under the rim of the bowl are fine. Hopefully this helps out. Cheers!

  • @a..d5518

    @a..d5518

    2 жыл бұрын

    @@vanhattfield8292 EDIT. "......when the tank no longer moves 'serparately' from the 'tank'..." separately BOWL was just wanting to point out the tank/bowl error but spell check pointed out the extra "r" in separately 😁 Excellent advice! It has always puzzled me as to why the tanks are so fragile at that point, an extra half inch of thickness in the bottom, or maybe ribs to strengthen it, heck even just a a thicker ring to enclose the area around the opening and the bolt holes... oh well, just me tilting at windmills

  • @vanhattfield8292

    @vanhattfield8292

    2 жыл бұрын

    @@a..d5518 I fixed the tank issue, but left the "r" to prove I am still human, lol. Cheers!

  • @loisfreiner6127
    @loisfreiner6127 Жыл бұрын

    Nice to hear how patient you are AND you spoke slow enough for us girls who have to repair ourselves 🙏

  • @joelpinguim7660
    @joelpinguim7660 Жыл бұрын

    From simple instructions it became a treaty. Very good!

  • @lenoregorman4688
    @lenoregorman4688 Жыл бұрын

    Good video, you're clear and keep instructions on track.

  • @Mo-P
    @Mo-P2 жыл бұрын

    As someone who just painted two bathrooms recently, whatever colour is behind that toilet will stay that way!

  • @penelopelgoss2520

    @penelopelgoss2520

    2 жыл бұрын

    Until the toilet is replaced...LOL

  • @joshualoveless4237

    @joshualoveless4237

    2 жыл бұрын

    ... You can take the tank off the wall without having to reset the toilet on a wax ring. But yeah so many toilet replacements and they had to paint after that to. Surprise job

  • @bobboscarato1313

    @bobboscarato1313

    2 жыл бұрын

    @@penelopelgoss2520 By then you won't find the paint! lol

  • @nathanbange6468

    @nathanbange6468

    10 ай бұрын

    I spent a Lotta time painting behind the toilet... an incredible intimate process 😑😅

  • @truelily7

    @truelily7

    9 ай бұрын

    Thank you do much! I was so afraid I had a serious plumbing problem and I have no money to hire plumbers. The fill tube had simply come loose.

  • @wholeNwon
    @wholeNwon2 жыл бұрын

    Another subtle cause is a weak siphon jet, usually from Ca++ salt deposits. The water jet is needed to initiate the siphon that then sucks the water and waste out of the bowl. You know this is the problem when the bowl fills abnormally high before it empties (hopefully without flooding).

  • @jhenry0688

    @jhenry0688

    2 жыл бұрын

    Nice point there! I have extreme hard water & no extra $$ to add a soft water system, I'd assume this will ruin moving parts much quicker. What happens if the overflow or bowl tube water level is right up to the very top, can that cause the bowl to overflow or does it just go down the drain? I've actually already witnessed the water level get high then, go down all on it's own in the toilet bowl before by draining on it's own. Also, because of the hard water, next, I think I'll most definitely need to flush my water heater tank of debris. Do you have any astute knowledge regarding water heaters as well??

  • @wholeNwon

    @wholeNwon

    2 жыл бұрын

    @@jhenry0688 That is likely to be your problem. I think the best approach is at least an over-night soaking in strong acid like sulfuric. Works well to remove the scale but is VERY dangerous. Face/eye. body protection are needed. Baking soda a water to neutralize it if it gets anywhere it shouldn't, etc. LEARN how to use it first. Plan carefully. NEVER add water to acid, ONLY acid to water!!!!! If you don't know what you're doing, DON'T do it. Water heaters are usually very reliable.

  • @jhenry0688

    @jhenry0688

    2 жыл бұрын

    @@wholeNwon I use either white vinegar or a much better/stronger option is apple cider vinegar to soak parts, brush & remove deposits. It's a ton better for my health house & septic, besides that, it's green/organic & doesn't pollute the environment & not dangerous! I just had to do a water heater repair a month ago & it's only 5 years old. I'm going to flush the tank out this week.

  • @jkbrown5496

    @jkbrown5496

    2 жыл бұрын

    @@jhenry0688 You should look at the rim jets getting clogged by the deposits. A first solution is to pour some basic 5% vinegar down the overflow and let it sit. You can cut off the water and flush to avoid the toilet flushing if you crest the s-trap. That's relatively benign. Just put nothing down the overflow that may gum up or accumulate. There also the tedious job of poking a wire through each hole around the rim. And for completely blocked rim jets, I saw a video years ago of a guy using muriatic acid, but that requires sealing off the bowl and overflow to avoid the off-gases. But something like that you have to be careful to use a funnel and not get it on metal parts as it will corrode them. I used some 30% vinegar once and even that put off a strong vinegar smell. I'd use the 5% vinegar several times to see if it could descale before I moved to the stronger stuff. Upside of the 5% vinegar is it left the commode seemingly cleaner. I assume because it dealt with any growth up in the rim area

  • @wholeNwon

    @wholeNwon

    2 жыл бұрын

    @@jhenry0688 Good that it works for you. I do use citric acid for some things but it wouldn't begin to touch some of the deposits I've dealt with. My water heater is over 30 now and only one 5' repair...thermocouple.

  • @mississippiqueen2u
    @mississippiqueen2u Жыл бұрын

    Helpful. This helped me. I have never worked on any toilets in my life until today. Thanks!

  • @peggyperry1804
    @peggyperry18049 ай бұрын

    3:30 in the morning and the bowl had very little water in it. i thought i was going to have to pay a plumber a ton of money to come and fix it. found and watched your video and fixed it in exactly 1 second. the little hose had fallen out and i stuck it back in. great video! thanks so much!!!

  • @chrisgraham2904
    @chrisgraham29042 жыл бұрын

    You failed to mention that most flappers may have various methods of making adjustments to them. Adjusting the flapper causes the flapper to stay up and float for a longer or shorter period of time as the water evacuates from the tank to the bowl. When properly adjusted, there should be no need to hold the flush handle for a longer period of time for the tank to evacuate. An improperly adjusted flapper will cause it to close and seal the opening to the bowl before the tank has fully emptied and result in a less forceful flush and failing to disperse the bowl contents to the drain.

  • @sminthian
    @sminthian2 жыл бұрын

    I didn't know you could adjust that so easily. But a problem I've run into many times is that you need to hold down the handle the whole time to make the toilet flush all the way. Maybe you could do a video on that? (I've fixed it in the the past, but probably not the correct way...)

  • @EverydayHomeRepairs

    @EverydayHomeRepairs

    2 жыл бұрын

    Good idea, thanks for the feedback 👍

  • @sdw4622

    @sdw4622

    2 жыл бұрын

    Most of the time this can be fixed by adjusting the chain length between the handle rod and the flapper. It usually takes several tries to get this right. Make sure you leave a little bit of slack in it otherwise the slightest bit of tension can prevent the flapper from completely sealing and allow water to slowly bleed through and the tank will need to occasionally refill as the water level drops. If you notice in this video the chain has a small float attached to it. On some models this is designed to help keep the flapper raised to allow the float to stay open longer and provide more water to enter the bowl. Ultimately you want the flapper to raise and go almost vertical (90 degrees) and then it will fall back down with gravity as the water level decreases.

  • @kenmore01

    @kenmore01

    2 жыл бұрын

    I believe that is a "feature" of lower flow toilets. The idea is to use less water per flush. That said, as you could see in this video, if the water level is too low in the tank, it compounds the problem, because not only is there less water in the tank for a flush, but the flapper closes too quickly because it doesn't stay open until the tank empties, only until it's at a certain low level. Starting with too low a level in the tank in the first place makes it close much sooner, maybe immediately.

  • @tscook10

    @tscook10

    2 жыл бұрын

    @@kenmore01 they're not supposed to do that, typically. The newer low flow toilets have carefully timed float valves. If they're slamming shut immediately, even when they're fully opened, then they're probably set up incorrectly.

  • @OCC_Plumbing_and_Restorations

    @OCC_Plumbing_and_Restorations

    2 жыл бұрын

    @@tscook10 Every Kohler toilet is like that now and it's by design.

  • @toniajackson102
    @toniajackson1022 жыл бұрын

    Excellent presentation. Learned and understood -great, thank you.

  • @zackiinu7194
    @zackiinu71949 ай бұрын

    My overflow tube was dumping half the water directly into the tank. Once I repositioned it in the center like you said, the water level in the bowl returned to normal. No other adjustments necessary. THANK YOU 👍

  • @ocsrc
    @ocsrc2 жыл бұрын

    Set the tank level as high as possible and add an extra float because they make the flap close early to reduce water amount used in each flush. The older pre-1985 toilets used 2 1/2 to 4 gallons per flush The old tanks usually will fit the new toilets, so if you see an old toilet on the curb, take the 2 screws out the tank and take the tank. Get new gaskets, and a new fill valve, and arm and flapper, and change out the guts and put it on your new low flow toilets and you will have a real high flow toilet that only ever needs a single flush

  • @bigred9428

    @bigred9428

    2 жыл бұрын

    I'd marry an old toilet if I could, but I'm already promised to old tv.

  • @penelopelgoss2520

    @penelopelgoss2520

    2 жыл бұрын

    I wish I could find a few older toilets, I'd grab them. They're so hard to find. Not all old tanks fit newer toilets.

  • @vanhattfield8292

    @vanhattfield8292

    2 жыл бұрын

    That is so wrong. Toilets are designed to create a syphon effect when the water is released from the tank to the bowl. Adding more water than the fixture is designed for reduces the syphon effect and reduces the efficiency and performance. You are not "fixing" a problem, you are creating one. The tank/bowl combination is engineered to use a specific amount of water and any variations reduces its effectiveness.

  • @vanhattfield8292

    @vanhattfield8292

    2 жыл бұрын

    @@penelopelgoss2520 Marry the TV and date the toilet on the side. The TV to love and hold dear and the toilet to use when you get that nasty feel. 😂

  • @sebastam2603
    @sebastam2603 Жыл бұрын

    Easy to install, kzread.infoUgkxjA-hDN2m8_mi0Dg0JD8U6QiArozIAc4I and comfortable. No idea what other people were talking about when they said it was difficult to install or uncomfortable.

  • @hassanbazzi3545
    @hassanbazzi35452 жыл бұрын

    Fantastic information. I wish you were on KZread 10 years ago. I had to learn the hard way. Thank you for sharing

  • @EverydayHomeRepairs

    @EverydayHomeRepairs

    2 жыл бұрын

    😂 you and me both.

  • @bigred9428
    @bigred94282 жыл бұрын

    Just yesterday I noticed the water level was about 1/4 inch too high -- not a lot, but I did notice and wondered if I should bother re-doing the level on the fill valve by removing it and turning it. I had forgotten that the instructions mentioned using a screwdriver to fine-tune the level. Thanks, now it's in my brain for good. (I decided, though, until I hear the water running down the overflow, I'm leaving well enough alone)

  • @MICHAEL-lb1si
    @MICHAEL-lb1si Жыл бұрын

    THE FLOAT ON THE CHAIN ATTACHED TO THE FLAP CAN BE SET TO ALLOW THE TANK TO EMPTY COMPLETELY BEFORE THE FLAP CLOSES SO YOU DO NOT HAVE HOLD THE HANDLE DOWN TO EMPTY THE TANK. YOU DID NOT ADDRESS THE CURE FOR THE FIRST PROBLEM YOU MENTION BY ADJUSTING THE FLOAT ON THE CHAIN. CHECK IT OUT AND SHOW IN THE FUTURE, IT IS HELPFUL FOR TANK TO COMPLETELY EMPTY.

  • @lorettamw55

    @lorettamw55

    2 ай бұрын

    What causes water to leak into the bowl on a new toilet. I wad told to place food coloring in tank and if color gets in the bowl it means it's leaking water to bowl?

  • @paisana9378

    @paisana9378

    23 күн бұрын

    this is what my toilet is doing ..holding handle down ...what the float on the chain?

  • @viewfromthehighchair9391
    @viewfromthehighchair9391 Жыл бұрын

    Thank you so much for this video. I have been having so many problems with my toilets (2) with the fill apparatus not shutting off and the fill tube to the toilet dripping well after the process is done. Actually, this video was the first time I learned that the little tube filled the toilet itself which was the final piece of the puzzle for me. I now have a fairly complete understanding of the process. The question I have is, how can I adjust or fix the fill valve assembly (?) to make that tube stopping dripping. At night, my place is so quiet I can hear it dripping from the other end of my apartment which drives me batty. Thanks in advance.

  • @kevinronan7181
    @kevinronan71816 ай бұрын

    This was simple and informative ... helped me resolve a water-level issue in the bowl. Thanks.

  • @leg414
    @leg4142 ай бұрын

    Great explanation and with a visual example too! Even a professional plumber can't explain this more clearly than you have. Peace

  • @tonys9102
    @tonys9102 Жыл бұрын

    Helpful and very well filmed. It's really easy to see what you're discussing, which is important. TY.

  • @EverydayHomeRepairs

    @EverydayHomeRepairs

    Жыл бұрын

    You bet!

  • @mnauerth2466
    @mnauerth246611 ай бұрын

    We recently had our master bathroom remodeled. One of the guys that was working in there mentioned something about adjusting the water level on our toilet because he thinks we are wasting water. I took a look and after one flush, I noticed that the water was going all the way up to the top of the tube and just continuing to run for a good 5 or so seconds every flush. Then I noticed the slow trickle of water into the bowl and we would constantly hear the toilet fill kick on for a few seconds and shut off. I had an Idea what to do, but this video helped a ton and made it a 2 minute fix! I also noticed something on ours that was different from your video.. The line that you said sprays into the overflow/fill tube was connected on the opposite side which had the water spraying into the bowl and not the tube. I made that adjustment as well and everything seems much better! Thank you!

  • @debbiescott5659
    @debbiescott5659 Жыл бұрын

    Excellent demonstration Fixed the problem. Thank You for sharing.

  • @juancable1
    @juancable1Ай бұрын

    Thank you for your video and explanation. I can’t believe at my age I had to look this up. But I’m glad that I did, everything works fine. Now the water level in the bowl is perfect.

  • @lunalouhoo
    @lunalouhoo Жыл бұрын

    Thanks for this clear and concise explanation!

  • @ELMS
    @ELMS2 ай бұрын

    The water in my bowl was low. I had put the hose so it filled the tank instead of the overflow into the bowl. A 30 second fix. Thanks a bunch! 👍

  • @luxurycardstore
    @luxurycardstore2 жыл бұрын

    These how to and why videos are AWESOME

  • @jenniferb4432
    @jenniferb4432 Жыл бұрын

    Thank you. This totally helped me with an easy fix!!

  • @ricardotrujillo5106
    @ricardotrujillo5106 Жыл бұрын

    Great explanation, great appreciation, God bless you and your family and business.

  • @elsiemontgomery7974
    @elsiemontgomery7974 Жыл бұрын

    Perfectly explained. Thank you!

  • @doraswamymorasa5294
    @doraswamymorasa5294 Жыл бұрын

    I just replaced entire kohler tank parts. The water in toilet is low. I tried to rotate the clockwise per your recommendation. As expected the water almost came to the top in tank, but found that the water level in tank didn’t increase. I will call kohler to check on this as well. Thanks for a great video you produced for public to consume and Learn

  • @carlbussmann7559
    @carlbussmann75599 ай бұрын

    Always a good clear explanation.

  • @dwaynebakerjr.6572
    @dwaynebakerjr.6572 Жыл бұрын

    THANK YOU!!!!! I just realized that the Clip was never on the over flow tube and it was just dangling in water. Now I have MUCH more water in my bowl by fixing that 😁

  • @janej6253
    @janej62533 ай бұрын

    Thank you so much for sharing your expertise!

  • @artriumph
    @artriumph5 ай бұрын

    Excellent presentation. The best one on KZread.

  • @craigwalsh2970
    @craigwalsh29703 ай бұрын

    Great explanation! Much more helpful than “turn this float adjustment screw”. Subscribed.

  • @safepethaven
    @safepethaven7 ай бұрын

    You explained that very well; thank you.

Келесі