Be sure to check out Toja Grid's many different options! tojagrid.com/?aff=14

Very nice, I've seen their ads on insta, looks great and glad to hear it's decent quality.

@WalkersWoodworks

3 жыл бұрын

Yea well worth the money.

Great project great job

@WalkersWoodworks

3 жыл бұрын

Thank you!

Nice video!!! Looks great

@WalkersWoodworks

2 жыл бұрын

Thank you!

Love your video!

@WalkersWoodworks

2 жыл бұрын

Thank you!

Just saved me thousands

Very nice. It's been awhile since I have heard some Benny Hill. 😎👍

@WalkersWoodworks

3 жыл бұрын

Haha thanks!!

Looks great, Brandon. I wish you many years of enjoyment with it. BTW - a little Yakety Sax always makes a project go quicker. Bill

@WalkersWoodworks

3 жыл бұрын

Haha right? Thought that was funny.

Ha ha! Thank you KZread algorithms! I was mostly sold at “yes that’s a cattery in the background” but was tipped over into fully sold at “That’s not going anywhere (said pretty much every man ever)” 😂 Funny and great advice. Thanks!

@WalkersWoodworks

2 жыл бұрын

Haha glad you liked it!!

Hi, how do shade sails hold up in rain and wind? Do you take them off during big storms?

Good 😊

Any suggestions on how to install this on top of a paver patio?

Like it! Rapid Set self leveling concrete from Home Depot would freshen up that patch of floor you got there. Love the Catio too!

@WalkersWoodworks

3 жыл бұрын

Great idea! I've been thinking there must be something to help it out but I don't know much about concrete haha.

@W4TRI

3 жыл бұрын

Check out Michael Builds on YT

What if you spray paint the caps? Or buy black screws?

I wonder if you could add some small hanging potted plants to the underside of it? Good vid 👍🏻

@WalkersWoodworks

3 жыл бұрын

Oh for sure! They even make shelves and stuff that attach to them haha.

After watching this video I went and bought the Toja Grid Pergola kit, although I was satisfied with the black and wood look, it was not as easy as you made it seem. The brackets were so tight fitting I had to use a sledge hammer to force in all the 4x4 wood. Doing this alone took longer than if I would've just built the whole frame out of wood.

@WalkersWoodworks

Жыл бұрын

Wow. I wonder why. Was the wood you used not dimentional? These are designed for construction style 4x4's which are actually 3.5 x 3.5" If you watch my video I did have to hammer a couple in. However that made for a nice fit that has less racking.

I am considering this, but how do I slope mono-pitched clear polycarbonate corrugated roof panels on top of this, given that this is more like a flat roof design ?

how it looks inside? as i understand, corner part have no wood inside. right? What is it use for stop wood in the end position?

The perfect solution for a nice patio to make it more usable in the hot times. The Benny Hill theme made me laugh

@WalkersWoodworks

3 жыл бұрын

That's for sure. Haha I thought it was pretty funny.

Can anyone get the 8x16 that you have?

It will be nice to have some shade...now you need to build a table and some chairs. Did you consider replacing that old dilapidated concrete?

@WalkersWoodworks

3 жыл бұрын

I've thought about it but it's low on my priority list haha. Currently trying to get the new shop up and running.

Nice! Is there a slope to prevent the top from holding rain?

@WalkersWoodworks

Жыл бұрын

No they are mesh.

Where can I purchase the tent stakes? They fit perfectly through the holes.

@WalkersWoodworks

2 жыл бұрын

I think I got them at harbor freight.

@Jessica-cr1sv

2 жыл бұрын

@@WalkersWoodworks I was looking at Harbor Freight and was wondering if they’re the same thing, thank you!

Think u should have refreshed the cement

What wood did you use?

@WalkersWoodworks

2 жыл бұрын

Douglas fir.

Is 4x4 enough or do you wish you would have did 6x6

@WalkersWoodworks

2 жыл бұрын

4x4 is plenty. We have fairly strong winds too.

@dustinmurray2348

2 жыл бұрын

This was also my question. I’m trying to decide between 4 or 6, so this helps. Were your lumber lengths the same for all? 8’?

How much did this size cost you

@WalkersWoodworks

2 жыл бұрын

The be fully transparent they sent me all the components. I did buy the wood however I think it was about $300 in wood. It would have been around $1000 all together which sounds like a lot but if you go buy complete ones they are way more than that. There is a link to their site in the video description if you want to check them out. 👍

What kind of wood did you use?

@WalkersWoodworks

2 жыл бұрын

Just fir for this one.

@ava1

2 жыл бұрын

@@WalkersWoodworks thank you! It’s beautifir :)

@ava1

2 жыл бұрын

@@WalkersWoodworks what kind of paint did you use for the posts ?

How high were they when they priced these things? Lawd. I've seen them before, and while it looks nice, come on... those prices are crazy.

@WalkersWoodworks

2 жыл бұрын

Metal isn't cheap now days.

@jaisontoor9459

Жыл бұрын

Still cheaper than buying a hard top gazebo.. would much rather get this and slap a couple of plastic sheets on it

Very Nice. What was the total cost.

@WalkersWoodworks

3 жыл бұрын

I think it really depends what kind of wood you use and the price at the time. They sent me the kit but I bought the wood. I think if you bought fir like I did total would be right about a grand for everything.

@elpaisa1

3 жыл бұрын

@@WalkersWoodworks thx for the information

@Labrat500

2 жыл бұрын

How tall were your vertical post?

P

Save the money and learn to do the joinery...the grid systems cost more than 4 times the cost of the lumber!

@WalkersWoodworks

Жыл бұрын

That’s an option too.