Really nice and simple project. I would just add that, if you’re going to load it up with heavy stuff, it’s a good idea to use an ‘L’ bracket or two to fix the unit to the wall. Especially if there are kids in the home.

@PneumaticAddict

4 жыл бұрын

YES! Good thinking! Preventing tip over is very important.

@rickcolumbo3148

4 жыл бұрын

Small kids will never tip it and ones that are big enough to tip it will love the adventure of getting themselves unstuck.

@bascostbudde7614

4 жыл бұрын

@@rickcolumbo3148 healthy attitude, Rick. I'd have an eye in the back to make sure Legal doesn't catch up with it, but don't get me wrong: this is how I raised my children just as well.

@DaddyBear3000

4 жыл бұрын

_ David _ so you didn’t hear about the Ikea wardrobes and massive chests of drawers TIPPING OVER and killing children then. Stability and leverage have nothing to do with the strength of someone.

@rickcolumbo3148

4 жыл бұрын

@@DaddyBear3000 Her shelf has no drawers and isn't particularly tippy. Your child is more likely to die in the car with you than at the hands of remorseless killing furniture.

That diagonal measurement tip to make sure everything is squared up is gold. I'll use that forever.

the author does like to from scratch, shaping and trimming wood from large blocks into fine finished products. kzread.infoUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ as another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us dont have the room or budget for. But, knowing how to do these things, even if we wont be able to practice the full stack project, is still great.

Love this shelf idea! I used it this weekend to make a small “catio” for my cats. I made two of the shelves partial shelves so the cats can go to different levels and screened the whole thing in. My cats are going to love it and it was so easy with this basic shelving unit build. Thanks for the idea!

@randon19yearold

2 жыл бұрын

That’s awesome 😼

@AereForst

25 күн бұрын

Exactly what I intend to do but I’m doing 2 cutouts per shelf between the different shelves so they can hop through

I built ten of these shelf unit to use inside my storage unit. I added heavy duty metal castors to the bottom, making the bottom shelf flush instead of raised, and they work great. Some of them are probably loaded with 1000 pounds of material. I glued and screwed all the joints and pre-drilling is a must to prevent splitting the wood at the ends of boards. I have been using them since shortly after you put out this video, because I made them right away, and I am very happy with them. Thanks for sharing the video and plans.

@jeq2822

2 жыл бұрын

Cost?

Simple and yet detailed. Great job on the build. Something else that you could do if you wanted would be to add a piece of peg board to the end to organize things like bike helmets

Just spent this rainy Saturday building mine. I went with the 2x3 stud version. Followed your instructions and it turned out great!!!!!

Thanks for posting! To keep the units ”free standing” and able to be moved for cleaning, rearranging, etc. I would add opposing diagonal braces on each of the ends. This will make the entire unit more rigid and eliminate the need to fasten to the wall. Keeping the totes full of heavy stuff on bottom shelf is self explanatory! Thanks for posting!

What a great video! Very good tips and I always love to see a fellow woman doing the job right and ALL BY HERSELF!

@PepperDeVillle

2 жыл бұрын

I love seeing female representation in construction! It makes me raise my own expectations for myself. Even though my mom (and dad too) taught me basic woodworking and power tool handling, it still helps to see women doing it.

Thanks Elisha. I built a mofified set of your shelves to put in a wardrobe (so they would't be permanent) and they turned out great.

So glad I found this video! I recently moved into a new apartment and needed more storage. I had a corner space that I could put a shelf, and so I did using this build plan as the template and retrofitted it to my place. Very simple plan that anyone can do. Thank you!!

Built a version of this today, using what I had on hand. I used MDF instead of plywood for the shelves, seems to work well. Thanks for the great video!

Surprisingly rugged and solid. Built these with my young son. Thank you!

Simple and brilliant. I agree with Karl Harris' comment about bracketing to a wall for heavy stuff. If you have really heavy stuff you can also use corner blocks underneath where the shelves attach to the upright legs. Now I want to go build one!

I'm about to build my own set of shelves and I think I watched this video about 12 times...this seems so easy.

@nationaldamageappraisers1860

3 жыл бұрын

Great job.

@cheriwebster6144

3 жыл бұрын

How did it go?

Thank you! I've been planning on building a few sets of shelves for my garage similar to these. Using your plans now instead!

Shelves look well and so does the carpenter!

@ktmndu

2 ай бұрын

Look up the word “objectification”

Nice shelving unit. I forego the glue step. Ive found our garages changa quite a bit over the years and its nice to disassemble a shelf unit to re-use the lumber in a different configuration. The screws are plenty strong enough and to avoid any racking just screw into 1 or 2 wall studs. Thats all you need. Nice sturdy unit you have there. Keep the videos coming. I like what your projects.

I had a problem with my fridge. I thought it was broken. Then I checked the filter and it was so so dirty. Cleaned it. It worked perfectly again. Thanks to this person who generously share his knowledge. I contacted Samsung thru whatsapp, it took a whole day of unplugging the fridge cable and transferring the whole fridge and freezer. It was frustrating. Thank God he directs me to this video. God bless you sir.

wow. all i can say is wow. what an amazing concise video with a great presenter/tutor/DIY person or whatever the term is lol thank you for the video. this, coming from a materials and mechanical engineer. we have a tendency to be too complex and yet a person on youtube can make this be so simple and alluring. im starting to understand why content, especially this type of content has to be done the way it is done here. because not only is the presenter/youtuber aesthetically and vocally "pleasant", but she makes it so concise, direct, confidentally, and "normie" (normal ppl can do it too, etc). there is a quote by leonardo davinci that comes to mind: “Simplicity is the ultimate sophistication”

A quick and easy way to get your shelves square and to help keep them that way. I cut 4x4s the length of the 2x4s height. Then i cut it again from one corner to the opposite corner. This lil V can then be placed in your corners for rigidity and to keep it square. Good luck and great video

Yes I do, I thinking many times how to start making shelf of my own then feeling proudly to show others that I make it myself, thank you for infos

Something I've done with some tall bookcases and even tables in my house is to attach wheels to the bottoms. Makes it so easy to move things. Looks like (maybe) if you could attach a small piece of a 2 x 4 to the bottom of the legs, it would make it wide enough to attach wheels to these shelving units, too. Then, if you ever want to "hose out" your garage, you could just move the shelves out of the way so that the bottom of the legs don't get wet. Same if you decide to rearrange the shelving in your garage. Just a thought....

Great Video step by step. Also thank you for the cut list with pictures, exactly what i needed to add some shelving to my storage container for tools and stuff. Thanks again!

Thank you for sharing your awesome knowledge with us! Take care, Steve. 👍👍

I'm amazed how you freehanded that rip cut. That's some skill right there.

@laprepper

3 жыл бұрын

People in construction do it daily, but tables saws are nice

@blahdiblah2169

3 жыл бұрын

@@laprepper There's no way I can freehand rip cut that cleanly, but I hear you, if you're doing it on a daily basis you get a lot of practice.

@ScreamingEagleFTW

3 жыл бұрын

@@blahdiblah2169 its plywood.

The foam idea was really awsome because i always do all my work on the floor too.

Nice video, thanks. Several people commented on this, but a design improvement would be to drill perpendicular sets of screws at each corner for stability, especially for variations involving smaller pieces of wood. 2 long pieces of wood fastened along one axis only results in a (mobile) fulcrum. This blueprint works by adding a pair of screws in parallel. However a more universally stable design would involve securing each corner with perpendicular screws, resulting in a plane, which is far more stable and better suited for corners

Great ! Nice voice clear, straight up to the point! Congratulations 👏

Nicely done! I like the details like glue and predrilling holes. Watch how many men tell you neither are necessary! In fact, they very much are. Self tapping screws are great for metal but ALWAYS SPLIT THE WOOD! Predrill holes folks!

Thank you! Exactly what I was looking for😀

Great project and video. Thanks for sharing. The nice thing about wood is you can dismantle it when done and repurpose the wood.

Found my first woodworking project. Thanks for video and plans.

Im your new fan from PH.Literally a beginner in DIY.Still waiting for my tools to be delivered.This will be my ever 1st diy project.Wish me luck!

Thank you, i learnt a lot from this video and today i built my shelves following you instructions.

Very simple and beautifully built. I’m going to build this, Thanks for making this video❤️✨.

An addition that can take out any screw failure down the line is to add a compression leg in between each shelf, parallel to each leg. Nice project for the cluttered shop

@kieranh2005

4 жыл бұрын

Someone beat me to this suggestion. Good one. Put spacers on the inside of each leg between the shelf frames so the load is carried directly down through the legs and isn't relying on the screws and glue's shear capacity.

I feel like this is the perfect size for what I’m looking to build. Thank you

Great job well done from Australia 🇦🇺

Even easier- if you live in the UK most timber merchants and Big BIY stores will cut sheet material to size, usually four cuts per sheet are free but even if not it's only 50p per cut. Have them cut the ply into four- their machines are incredibly accurate and guarantee a perfect square cut, it's safer than doing it yourself on the floor, and the pieces will fit in your car boot which a full sheet usually won't.

I really like your straight forward design and build shelving unit! Yet another well thoughtout project! Well done!

I built a shelving unit similar to this one 7 or 8 years ago for plastic totes filled with electronics and even heavier bits like small motors. Still holding strong after all these years! Only difference is I also put a vertical strip of 2x4 between the shelves for some extra support, and I used OSB instead of plywood (half the price of plywood, but still strong). Since then, I've been building lots more for workbenches. It's amazing how strong and durable these things can be.

Great build I adapted these plans for a set of basement pantry shelves one at full size 2'x4' and one set at 2'x2'. Thanks

Great project! Need to build some of these in my garage!!

This is perfect, exactly what I'm looking for

I am gonna build 2 shelves and a workbench wednesday - your video / plan looks simple and sturdy - thx

Thank you. I'm looking to make something similar for some plants. This was a big help.

Thanks… I just build 2 shelves like this based on your video!!! Thanks …. Rock on’

Heading to Lowes this morning to get materials enuff for two of these. Thanks for this video! 👍

Love this video, TY for posting!!!!

I want to built a garden shed for outside. I could build this shelf, put some plywood on the back and sides... put a plywood door on the front. Some primer and paint... viola... garen shed! I've wanted to do this for a while but wasnt sure how i wanted to do it... this shelf built will be perfect.. so thank you!

Great job! 👏🏻

I love you and your creations!

Все элементарно и просто! За труды с меня лайк и уважение!

So cool..luvvv it..thank you lady..great n simple ...!!! Thank you

Awesome work Elisha! 😃👍🏻👊🏻

Thanks for this! I followed your method and built a beautiful unit! Mine has one difference: I put the legs on the sides to maximise on front space. Also, I had the ply board cut at the hardware store.

Loved this video short sweet straight to the point not rambling off about things not video related good job❤

Like it. Some alternative options in the build are. Place the legs on the ends instead of front and back. You will gain 7” of front loading space. This will also allow you to place the shelf up against the wall instead of being 1-1/2” away due to back legs. I don’t recommend the legs on ends if your shelving unit is under 24” depth as it will compromise stability somewhat. Also pre drill with a combination bit and countersink it makes it a bit easier to draw the wood together and easier to drive the screw heads flush to wood The glue is a great idea also.

This is very helpful, thank you!

Thumbs up just for getting on the shelf... Oh and one for the hat and one for your lovely hair. TFS, G :)

OMG You make it look so easy .......... i have only hand tools, but still going to give it a go... Thanks ...

I like the trick with the foam underneath while cutting, thanks and nice work on the shelves.

Fabulous blue hair

Very nicely done another good tip for fast assembly on sturdy shelving for similar styled units are utilizing Pocket holes and Screws i personally think the best Pocket Hole jig is the Aluminum one Harbor Freight sells which i think is labeled Drill Master I do often buy and use Kremes screws and Storage cases i buy from Ebay because i like their Storage cases in all honesty any Pocket Hole Scews work fine IMO Ive also built many shelf units for myself and family members over the years Without any failures although i do prefer to spray a few coats of Primer and a couple of finish coats of paint on them Using my HVLP system

@ronvalley1973

4 жыл бұрын

actually, pine looks very cool stained with or without a clear top-coat of shellac or lacquer or tung oil or polyurethane. been refinishing furniture for customers for the last 43 years full time

@PneumaticAddict

4 жыл бұрын

I LOVE my HVLP! A clear coat would be a great way to keep the shelves looking nice for years.

Qué belleza de estante, Te Felicito!!!... Saludos desde Venezuela!!!

Thank you, you made it so easy now i can make it.👍👍

Quick, simple, effective. I like it

Im gonna make this for my garage. Thanks

Very helpful, thank you!!

Love this video. Thanks 😊

Very nice work. Well done!!!!

Excellent!!!

Thanks so much for the Idea pretty woman... I WILL MAKE THIS AS WELL. Great for my scrapbooking / sewing room. May you have a wonderful 2021 Thanksgiving day.

just want 2 say thank u 4 ur helpful hints,all my cuts wasnt straight,but it all came together ,my 1st time building a shelf like this,next one will b better an EZ er,lol,

Thanks for this nice and easy idea

Wow what an exceptional how to video !

YOU'RE SUCH A BADASS!!

Great job

I like the brand new tools and never worked in gloves ;). Nice work!

Awesome! But I can’t imagine how heavy that thing is 😂

Great job!

We use an eight foot wide version of this for storage at the makerspace. Even without glue, they hold over 300 lbs (me) on the middle shelves. Also, we found that if you assemble them like she shows here, the weight of the items on the shelves will pull the frames back into square if your wood has bent from being wet. This makes the choice of wood less critical.

@PneumaticAddict

4 жыл бұрын

Thank you! I agree, these things could hold a tank and it's nice to be able to utilize less than perfect lumber

What a great yet simple project. You can also add cleats to the sides of two shelving units to make a work bench between them. Just make the "shelf/work top" the same way you did the shelves. Great project.

@PneumaticAddict

4 жыл бұрын

Thank you! Good thinking! I could always use more workbench space

Thank you so much 🌷🌹🌹

That was a quick and easy project. Easily customizable and super useful. Thanks for sharing!

Spax wood screws will eliminate the need to predrill holes. They work great and no wood splitting.

Best built l ve ever seen

god bless you 😁 making my life easier right about now

I have built shelves like this in my garage. They get wobbly over time. I suggest adding a plywood back to keep that from happening. I am going to be disassembling mine and adding shelving to the entire wall of my garage. Going to have gas can storage, slots for tool boxes, car cleaning and maintenance products, all going to be based on this style though.

Like from Brazil

Awesome🙋🏻‍♂️❤️😎

Thank you so much!!

Alright 😎 i like your style 🙌🏽🔥🔥🔥

great video!

great video and I loved what I had seen

Nice works.I would like to make my aquarium stand like this

The foam board is a great idea.

Amazing this

You gave me a great idea on your shelf's