Love it, keep putting out these vids of how you make your molds. Nothing else out there like this right now

@BackyardBoatworks

2 жыл бұрын

Thanks. This is what I do daily so I have a lot of content for it, but they don't seem to get the most views...haha.

Great video. Was thinking about how to build a mold for a guitar case project. This was very helpful for ideas, thanks a lot

Thank you, I appreciate your time and talent!

Great video Russ! Even though I do this crap everyday, still enjoy watching and learning from others!🤙🏻

@BackyardBoatworks

2 жыл бұрын

Thanks man. Appreciated.

@jcdesignsandboat-works8290

2 жыл бұрын

@@BackyardBoatworks yes sir!🤙🏻

Thanks!

@BackyardBoatworks

2 ай бұрын

Thank you !

👍 another great video

Thank you. Great help for my build

@BackyardBoatworks

2 жыл бұрын

Thanks.

pro tip. use glazing compound instead of modeling clay. its far cheaper and easier to work with

@BackyardBoatworks

6 ай бұрын

“Pro tip” lol 🫡

I appreciate your efforts to put these tutorials out there for everyone else. Other than cost, are there any other reasons for using polyester based resin instead of epoxy resin for this type of application?

@BackyardBoatworks

2 жыл бұрын

Epoxies and gelcoats don’t play well together. For something like this epoxy simply isn’t required.

Love these hatch vids! Do you have any vids where you show how to do recessed hinges in the hatch and receiver?

@BackyardBoatworks

2 жыл бұрын

None of my molds have a recess for hinges because each customer is using different hinges in their boat. You could easily add hinge recess just by adding blocks of HDPE in the spaces you want the hinge to be located.

I love this. Great video Russ. Thank you. What size spray tip are you using for the PVA?

@BackyardBoatworks

Жыл бұрын

Any tip size works but something smaller is better because PVA is like water. If you have a larger tip just turn the material flow way down and bump up the pressure on the gun. The key is to do very light mist coats letting the first coat tack up.

can you explain why you first put the release wax then put the PVA mould release? I don't know a lot about this process.

@BackyardBoatworks

3 ай бұрын

That’s just the order it goes.

@Riderdownn

3 ай бұрын

@@BackyardBoatworks so they are both mould release products?

@BackyardBoatworks

3 ай бұрын

@Riderdownn yes

I love your videos. Could you use caulk or silicone to make the radius instead of clay? Thanks.

@BackyardBoatworks

Жыл бұрын

Yes but it’s not as easy to shape.

One of the best tutorial I've never see, Thanks a lot! About the antiskid, do you use a pattern or antiskid paint?

@BackyardBoatworks

2 жыл бұрын

It depends on the customers boat. Most of the time I am only making the part and the customer is handling the final finishing. If the lid needed to match a non-skid texture I would have needed to add the texture into the mold before I sprayed the gelcoat.

That material you held down with the cinder blocks. What was it? Can you use the yard sign material you can buy at a big box store. Thank you

@BackyardBoatworks

2 жыл бұрын

It’s a honeycomb coring material. No…gator board will not work because the resin won’t bond to the plastic.

@redwood1957

2 жыл бұрын

@@BackyardBoatworks where can you buy that board? Thank you

@BackyardBoatworks

2 жыл бұрын

Marine supply stores

where do you buy the 3/8" honeycomb core material to strengthen the hatch lid?

@BackyardBoatworks

Жыл бұрын

Fiberglass Coatings Inc.

How strong is the lid with the 3/8 honey comb? Strong enough to walk on as a deck hatch?

@BackyardBoatworks

Жыл бұрын

Yes. Plenty strong enough with 1708 on each side

Hi Russ, how could you make a mold, without a sample and rounded, for the front of a camper?

@BackyardBoatworks

Жыл бұрын

Mold for what ?

@KarenLorraine_RAK

Жыл бұрын

@@BackyardBoatworks for an rv compartment door... its rounded vertically and horizontally. I can't seem to attach photos :(

@BackyardBoatworks

Жыл бұрын

It’s sounds complicated. email me photos and I’ll try to help. russ@backyardboatworks.com

Can you use awlcraft instead of gelcoat to make a mold?

@BackyardBoatworks

Жыл бұрын

No

hi my friend, what is that sign that you put in the minute 11:23? what material is this and what is it for?

@mullerrn

Жыл бұрын

rectangular plate in 11:23 ? What is It?

@BackyardBoatworks

Жыл бұрын

It’s honeycomb coring material. It give the lid strength.

20-25mm thick gelcoat? Did I hear that right at 7:32?

@BackyardBoatworks

2 жыл бұрын

20-25 MILS. Not millimeters.

a template of a template?

@BackyardBoatworks

Жыл бұрын

Do you have a question?

How much charge for something like that.

@BackyardBoatworks

2 жыл бұрын

Depends on the lid. But my standard rate is $75/hr plus materials

What’s the name of the song at the end?

@BackyardBoatworks

2 жыл бұрын

It’s a song I purchased from a royalty free website.

In 2023 labor rate for this kind of work is probably $600 an hour

25 mill thickness? I guess you mean 0.25 mill unless this is some sort of imperial unit I'm unaware of

@BackyardBoatworks

Жыл бұрын

Paint thickness is measured in mils. Also plastic sheeting and garbage bags are also measured in mils. Go to Home Depot and buy some plastic sheeting. They come in different mil thickness such as 4mil 6mil etc.

@BackyardBoatworks

Жыл бұрын

1mil = 1/1000 of an inch.

@thomaslindroos1667

Жыл бұрын

@@BackyardBoatworks oh okay so a milli inch, gotcha. To my knowledge film thickness is measured in microns but I guess murica will be murica. Thanks for the insight though. Cheers!

@BackyardBoatworks

Жыл бұрын

I don’t make the rules mate. But I’d imagine it’s easier to discuss paint thickness as 4mil as opposed to 101.6 microns. But what do I know about shit. Just a lowly Murican over here.

Nice vid. Great for making stuff but this gear is most horrible to work with and clean up.

@BackyardBoatworks

10 ай бұрын

Gear ??

@alexbowie6316

10 ай бұрын

Yeah gear. Means the materials . In Scotland, gear can mean anything used , or a commodity, they can even say gear to describe drugs. " he is taking gear"

@BackyardBoatworks

10 ай бұрын

@alexbowie6316 what other “gear” are ya gonna use ?

@alexbowie6316

10 ай бұрын

@@BackyardBoatworks Do you disagree with my opening comment?

@BackyardBoatworks

10 ай бұрын

@alexbowie6316 I don’t understand the comment. If you don’t like working with resin this isn’t for you.

$3,000 for this