Oh my goodness I love your strap idea I screwed around with the trim knife method alone from other videos for like 20 minutes trying not to break anything while your strap method took less than 10 seconds (I used a light duty tie down strap and didn't even need to use any trim tool), you're the man with such a wonderful idea.

@Explorer-pj1nx

2 жыл бұрын

I'm so glad it worked well for you! Neat little trick that saves me a BIG headache

Amazing. Watching the video took longer than the actual job. Can not describe how clutch that move with the belt/strap is!

The belt strap idea is absolutely genius!

hey bud, you just saved me a lot of frustration! Thanks for the vid - I must be the 40th person to say thanks for the idea with the strap! i used a nylon guitar strap - worked fantastically.

@Explorer-pj1nx

3 ай бұрын

Right on! Love that it saved you some time and trouble.

@danherrick2310

3 ай бұрын

@@Explorer-pj1nx you got no idea - i am pretty much useless at working on cars in any capacity! The heroes of youtube tutorials are the ones truly doing the lord's work lol

Slipping the strap under the taillight assembly to pull it off works great! I watched multiple videos on this process and pulling the taillight off always looked like a real struggle. Using a strap let me pop the assembly off in seconds. Thanks for the tip!

@Explorer-pj1nx

4 жыл бұрын

Sometimes it's just the little things that make all the difference! Glad I could help.

Tanks for the answer. I also found some kind of flat plastic spoon in the kitchen. With a piece of rope and a piece of cloth it will work. I'm just imitating how you did it in the video. Many thanks again

Thanks for the video! Couldn’t figure out what was still holding the housing onto the fender; your strap method did the trick ! Make sure to have the right bulb(s) before you start their replacement - don’t be me.

Grest no b.s. video. Thx for keeping it short w/o a ton of theory and “i love this bcz…”. Good tip w a belt too😊

Your strap trick is absolutely awesome. I'm way too impatient for those types of little projects. Thanks to your video my Sunday afternoon didn't get ruined.

@Explorer-pj1nx

9 ай бұрын

Right on! Love to hear that!

Thanks so much for the video! Using the strap as you demonstrated very likely saved me from a cracked taillight. Definitely the easiest and safest way to remove the assembly.

@Explorer-pj1nx

2 жыл бұрын

Don't know how I did it before I schemed that little idea but I'm sure glad I did!

That belt trick was magical. Thank you!!

@Explorer-pj1nx

3 жыл бұрын

My pleasure! Glad it worked out

Used the handle from a folding chair bag, worked wonders thanks

Fantastic tip on using the belt or strap to unlock that tab. I didn't find any other videos that made the process so easy. Brilliant!

@Explorer-pj1nx

Жыл бұрын

So glad it worked for you as well!

The strap was the best suggestion of all the videos I saw. Many thanks!

Thanks. It worked. Other videos were uuuuuuseless. Not yours. The strap method. Bravo 🙌🙌👏🤩

Shout out to you!! As others said, your instructions were spot on and was an easy task. I did the whole change out, including bulb test, in about 6 min. Your belt trick is the bomb. Thank you!

@Explorer-pj1nx

Жыл бұрын

So glad it worked well for you also! And thanks so much for sunscribing, it makes such a difference to me

Wow! The strap trick is genius. Thank you!

@Explorer-pj1nx

3 жыл бұрын

Happy to share! Tell your friends!

Used this strap method twice after watching lots of other videos, This is the BEST! Thanks for sharing!

@Explorer-pj1nx

2 жыл бұрын

So glad it worked for you!!

Worked exactly as you showed. I used a lightweight tie-down strap with excellent result. Thanks for the clever and efficient process.

@Explorer-pj1nx

3 жыл бұрын

Much better than just trying to tug it out! Glad it worked for you as well

Props to you for the strap/belt idea. That made it so much easier and smoother!

@Explorer-pj1nx

2 жыл бұрын

So glad it worked well for you+

Brilliant!. I looked at 3 videos before I found yours. Worked like a charm. No special tools required. Thank you!!!

I used your trick with the rope, it made this super easy! Great tip! Thank you for saving me!

@Explorer-pj1nx

3 жыл бұрын

I'm glad it worked well for you also!

Grappled with that problem for about 30 minutes BEFORE I watched your video. Excellent. Thanks for saving my fingernails and joints prior to doing something STUPID. Best to to you Pal !!

@Explorer-pj1nx

3 жыл бұрын

Glad you found me! Peace

Your method is a work of genius. Following your suggstion, I used a length of old elastic suspender to open the clip so that the tail light assembly could be removed.

@Explorer-pj1nx

Жыл бұрын

Awesome! That's a great usage

Using an old belt, your suggestion worked easily. It made changing a burnt out brake light a quick easy process!

Thanks for this, especially the strap approach. Made quick work of the replacement, which was especially welcome when I did the work in the driveway in sub-freezing temps.

Thank you! Your trick with the belt worked like a charm. I did strip one of the bolts but I had an old 10mm from something that I used as a replacement. I won't make that mistake again!

@Explorer-pj1nx

3 жыл бұрын

Phew, close call! Glad it worked out in the end though

Dude...... thank you. You don't know it. But you're my DIY superman! Haha

@Explorer-pj1nx

3 ай бұрын

Yo i love to hear that! Thank you so much!!

To remove the lens easily, simply apply pressure to the front part of the lens and push it backwards. No tool needed. I changed brake light bulbs today and this is easier than a tool.

Brilliant! Strap idea looked very smooth.

THANK YOU so much for this trick!!! I was struggling for so long trying to get that darn thing off, your trick worked perfectly!!!

@Explorer-pj1nx

6 ай бұрын

So glad it worked

This was great info on how to pop out the light from the compression tab. Thanks so much!

@Explorer-pj1nx

2 жыл бұрын

No problem, glad it worked out for you!

Thank you so much! The strap trick worked amazing.

Thank you so much for this video! I was scared to death I was gonna break my tail lights trying to get it off. Watched your video, did exactly what you said with the strap (used a dog leash 😂) and it worked perfect!

@Explorer-pj1nx

2 жыл бұрын

Dog leash is a great idea too! So glad it worked for you

Strap is genius! Worked immediately. Another video suggested an old credit card or gift card if you don't have the plastic tool to pry it open enough to get the strap in

@Explorer-pj1nx

Жыл бұрын

What a great idea as well! Innovation is a wonderful thing

This video was the best! The strap idea is a life saver. Thank you!!

Thank you for video! Worked like a charm on my 2018 Forester. Especially the belt idea!

@Explorer-pj1nx

Жыл бұрын

Right on!!!

Strap worked beautifully! Thanks!

@Explorer-pj1nx

2 жыл бұрын

Good stuff! Glad you made it work for you

The strap idea was perfect! Thank you, great tip!

@Explorer-pj1nx

Жыл бұрын

Awesome! Glad it worked as intended

Thanks much! Wrapped 2 small screwdrivers in electric tape, wife helped to pry, slipped web belt in, worked just like video!

@Explorer-pj1nx

2 жыл бұрын

Nice handywork! I bet she was impressed. Tell her it was your idea!

Folks, this works great! Spend a couple of minutes watching this video and save yourself a lot of time and frustration.

@Explorer-pj1nx

2 жыл бұрын

So glad it worked well for you too! Every little bit helps

This worked for me. Inserting the strap and pulling was much easier than other methods.

Very helpful. Completed in 4 minutes tops

Built/strap idea save me a lot of time and frustration thank you so much!

@Explorer-pj1nx

Жыл бұрын

Right on!

The old belt trick.. thanks for sharing 👍

Just used this method. Awesome tip, thanks.

@Explorer-pj1nx

Жыл бұрын

Thrilled to hear it!

2 seconds with this video!!!! Awesome --- Thank you!

@Explorer-pj1nx

2 жыл бұрын

Glad you enjoyed!

Worked perfectly! I used a ratchet strap. it slipped right in. I was able to easily pull the taillight off.

@Explorer-pj1nx

Жыл бұрын

So glad it worked for you!

Great idea! It made it super easy.

@Explorer-pj1nx

2 жыл бұрын

Awesome, so glad it worked for you too!

Thanks -- very helpful.

Wouaw, thank your very much, the belt thing, a real charm.

Five stars - saved me from breaking the assembly.

@Explorer-pj1nx

Жыл бұрын

Excellent! Glad it worked out for you as well

Well that made it easy!!! Great tip!! Thanks man.

@Explorer-pj1nx

Жыл бұрын

So glad it worked well for you!

Thanks for your video was great and helpful nice work

@Explorer-pj1nx

2 жыл бұрын

Thanks so much! Glad I could help you out

Fantastic, thank you

ty this helped me so much

Thank you very much. Not to difficult after all, once you have good instructions.

Thats awesome trick. Save me time and sweat....Love your this clip. Thank you so much!

@Explorer-pj1nx

3 жыл бұрын

Glad it helped you out of a pinch!

Whoa I’m too baked to do this now 🤠 thanks for info

Worked PERFECT😊

THANK YOU!!

Best video to do this.

I tried to remove the taillights for more than 20 mins, and finally failed. Until I watched your video, use a belt, 3 seconds, done. Thank you so much!

@Explorer-pj1nx

2 жыл бұрын

My pleasure! Thanks for watching

The belt's the boss!

@Explorer-pj1nx

3 жыл бұрын

Best trick they never taught ya!

I just used some nitrile gloves and pulled the assembly right off no need for any tools but what you use to get the screws out .

What LED bulb did you get for the backup light on Amazon? Did it require anything else besides the bulb? Great video!

Thank you for so calmly show me how to change the light bulb. I have a 2013 Forester, would that be about the same? And is the clamp also in approximately the same place?

@Explorer-pj1nx

Ай бұрын

I think 2013 was the last year of the previous generation, but should be mostly the same! Bulb might be different / other minor differences.

Fyi the tail light (not brake light) can be replaced with a Sylvania 168.

Thanks for the video; would you mind adding the actual model number of the light you used as a replacement?

@Explorer-pj1nx

Жыл бұрын

I believe it was this: AUXITO 912 921 LED Bulb for Backup Light Reverse Lights High Power 2835 15-SMD Chipsets Error Free T15 906 922 W16W Bulbs, 6000K White (Upgraded, Pack of 2) a.co/0idmmzK

Love the video! Are the brake light, reverse light and tail light all the same bulb? Also what bulb did you use? Cheers

@Explorer-pj1nx

5 ай бұрын

Hi! I do not believe they're the same bulb - to be honest I forget which bulb I use, but I know theyre different from one another

@chrismanning6954

5 ай бұрын

Ok good to know thank you!

Yep everybody else already chimed in on this but ditto about the strap trick… about just ripped it off and resigned to deal with the consequences later lol

@Explorer-pj1nx

7 ай бұрын

Glad it worked out for you and you didnt rip anything off!!!

Thanks. Any issues with the LED upgrades?

@Explorer-pj1nx

2 жыл бұрын

So, technically no; however, these headlight housings weren't designed for LED's. They won't look right. Personally, I wouldn't recommend it.

Which light is the one that's on when the headlights are on? The top brake light? that's the one that's out on my car (according to a family member driving behind me).

@sammy13rockies

3 жыл бұрын

Whilst I'm driving forward.

@Explorer-pj1nx

3 жыл бұрын

Great question! Here's a trick I learned; dismount the tail light housing from its spot on the body, then with the car in accessory mode, turn on the lights. Go and inspect which arent functioning and go from there!

Any idea if this install is the same for the 2022 models?

@Explorer-pj1nx

2 жыл бұрын

It is not 100% the same, but i bet it's a similar process. Give it a try!

@Josbor11

2 жыл бұрын

@@Explorer-pj1nx Did it today, soooo easy. Looks like 2019-2022 is different because the rear light assembly is split into two sections by the trunk. You just open the power gate all the way up and then on the inside there are two little cubbies. The covers pop right off and the bulb is directly over the opening. Honestly took maybe 3 minutes to do both lights.

@Explorer-pj1nx

2 жыл бұрын

That's awesome wow, good work!

The bottom bulb is NOT a brake light. It's only a running light.

Thanks, I changed the entire thing because someone broke my case, when I got it back together I tried to start the car and now it won't go in gear and the steering wheel is locked. This may have happened when I changed the front buls because it was out too, any help appreciated.

@AdrienneLawley

Жыл бұрын

It's like every time I fix something, I break something else, lol. I fixed the side view mirror, now the door won't unlock and my lights are shorted

@Explorer-pj1nx

Жыл бұрын

I dont believe those systems are related, but best of luck!

@AdrienneLawley

Жыл бұрын

@@Explorer-pj1nx Thanks, I found out what caused it, somehow I set off the auto alarm or shut down feature of the car, I found a hack online that said to turn the key in the ignition about halfway not fully engaging the lock to unlock and hold it for 60 seconds. I did that, got in the car and it started.

@AdrienneLawley

Жыл бұрын

gotta be the driver's door

@AdrienneLawley

Жыл бұрын

@@Explorer-pj1nx One more thing, you video is the best! I loved the "getting the bulb out" hack, I used a car shade strap, so cool to know

Using a strap let me pop the assembly off in seconds. Thanks ,

This is a little off subject. Have a 2016 Forester. For the last two weeks or so sporadically the tail lights and the light on the exterior of the hatch come on for unknown reason. All the doors are shut and locked, the light switch for head lights and such is in the off position. Go inside and about an hour or so some times longer the tail lights and hatch light are on. Go out and check to make sure every thing is turned off open and close all the doors including the hatch, but the lights continue to be on. Turning the light switch on a few times has no effect on turning the lights off. Yesterday checked the lights 3 times 5pm 9pm 2am and lights were off. Checked at 7am and the lights were on. Any one have any suggestions?

@Explorer-pj1nx

2 жыл бұрын

Christ, that sounds absolutely bizarre! Unfortunately I can't even begin to fathom what could be causing that. I'd reccomend taking it to a dealer and seeing what they think. Maybe a bad relay? That's super strange though. Hope you get it sorted.

@GM-en2xf

2 жыл бұрын

@@Explorer-pj1nx thanks for your reply

2 brake lights?

@Explorer-pj1nx

3 ай бұрын

I'll be honest im not 100% sure, but I think its just 1?

I have 2018 Forester 2.5 limited. Is mine the only one that has a tamper screw obstructing the brake bulb removal? I'm starting to think my dealer did it to scam people in paying stupid money for a simple bulb change.

@Explorer-pj1nx

3 жыл бұрын

Might not be a bad idea to pick up a set of tamper bits! Those are always handy.

@davidhaysbuckley

3 жыл бұрын

Thanks for this great video! Please explain what “tamper bits” are?

@Explorer-pj1nx

3 жыл бұрын

Tamper bits are bits that are specifically designed and are an unusual pattern, no that you need a different type of bit to remove it (beyond a flathead/ Phillip's head)

OMFG !!!!

@Explorer-pj1nx

2 жыл бұрын

Did it work for you?

@jaksmith6465

2 жыл бұрын

@@Explorer-pj1nx yea, once I got my belt on and pulled even a little, it popped right off

@Explorer-pj1nx

2 жыл бұрын

Good stuff! Pass that knowledge along to someone who needs it some day

Do you know if I need to replace my bulbs? My tail lights won't turn but only when I brake they'll turn on? Is this a light bulb problem