This video saved me a ton of time. Settings were not perfect but close enough to give me a good head start. Thank you.

I have an xtool d1 pro rotary will that work with this machine?

Hello awesome video, we keep getting a frame oversized error any help greatly appreciated thanks much

I know you are doing the rotary but I just noticed as on mine and yours there is nothing that catches all the debris falling through the honeycomb? When cutting does it not harm all the stuff underneath? I was just wondering cuz my diode laser had a metal plate under the honeycomb. So I wasn't sure if this need it. Mine is like yours Thank you

How's the Monport been working? I'm looking at a 100 watt but I'm nervous as all hell to pull the trigger but I really like that it has a built in chiller.

Hi, Thanks for the vid. Unfortunately I can't hear nor see the settings you did for the Y accelaration box.

Hi ,Thank you for your video, it is very helpfull. I Want to start engraving tumblers ,I have a 100 watt senfeng laser ,with the same rotary device.but I'am not sure what the focus height should be.?

I follow the same setup for my Omtech polar. Issue I am having is the framing is off. I did my step calibration, I selected current position to middle like you did, slowed down the speed. When I frame the work, it is not aligned where I want it to be. Any ideas?

@timetempest

10 ай бұрын

im also having issues with framing being way off and the roller rolls forever before doing anything. its so strange.

Good Video!

Are you changing steps per rotation on different containers?

@customgrains

4 ай бұрын

Negative:)

2:56 unloosen it, lol

Great video. I have the same laser you have and have been looking for an affordable rotary. I want the piburn but very expensive. But I want to engrave handle tumblers. How’s your rotary working? I’ve read some having motor problems? I’m looking for a chuck style.

@tinarichardson8085

Жыл бұрын

Can you do a handled cup on the roller style? It looks like it will accommodate longer items than the chuck. What made you choose this over the Omtech model?

Do you stretch the image 10% to give it a more round look on the tumbler?

@customgrains

Жыл бұрын

I do not!:) I keep it as is!:)

How did you configure your cutting order to minimize y axis moves?

@customgrains

Жыл бұрын

When you enable the rotary it disables the y axis and essentially make the rotary wheels the new Y axis. If that makes sense

@bzharris82742z

Жыл бұрын

Yep, got that. Your cut moves from the left of the image to the right. My image is an "O" with design/text inside of it. Lightburn wants to trace my "O" then fill in details inside and doing that the cup shifts slightly skewing the image.

@customgrains

Жыл бұрын

@@bzharris82742z do you have “optimize cut” or “flood fill” on?

@bzharris82742z

Жыл бұрын

@@customgrains running 1.2.02 Most of the design is lines, so fill options are not enabled I am using optimize cut path on laser menu settings

@bzharris82742z

Жыл бұрын

@@customgrains I am using a vector file. I am pretty sure that is the issue now that you made me think it through.

good morning @customgrains I am following all the steps as described, but when I hit start and the machine starts engraving, the design is engraving with the height of the design compressed. Ex: my design is W: 3" x H: 6.25" rotated 90 degrees (just like you have it on lightburn). The preview looks fine/normal. But, once it starts engraving, the design is engraving with the Height much smaller than the indicated 6.25", the image is coming out "squished", without any size changes being made on lightburn. any thoughts? @customgrains

Hello awesome video, we keep getting a frame oversized error any help greatly appreciated thanks much

@customgrains

21 күн бұрын

you're too close to the y rail. Move the rotary closer to the middle of your workbed:)