Got one. Highly recommended. Works great. Easy to use.

@Van_City

Жыл бұрын

Sure is easy to use. A must have tool 👍💯

You have become a Pro at this procedure....that actually how I would do it😊

@Van_City

9 ай бұрын

Thanks appreciate it 👍💯

For the top side You can use a soldering tip to melt the crack together and to even it out find a spot where there is excess plastic for the same color and can melt and butter it in..then sand it smooth, did this on my Ninja plastics

@Van_City

6 ай бұрын

Yes 100% I actually have another one I reviewed that had a tip included for melting the plastic, it worked quite good 👍

I ordered one last night to fix the small crack I put in my plastic drill press belt cover. I'm confident it's going to make the repair STRONGER than the surrounding area. Thanks for posting the demonstration.

@Van_City

2 жыл бұрын

Yeah that should work great for you. Thanks for stopping by 👍💯💥

Another thing you can use to fuse plastics and holes in plastics is baking soda and super glue. Forms a super hard fused surface.

@Van_City

10 ай бұрын

Yes that’s true I’ve used that technique before works great 👍

@glane3962

10 ай бұрын

@@Van_City Awesome 👍🏻 I enjoyed the video

I bought one a few weeks ago. Finally used it today, honestly it worked pretty good

@Van_City

Жыл бұрын

Yeah for what they cost it’s a decent tool 👍💯

Thanks for the video. I like the water squirt bottle tip.

@Van_City

Жыл бұрын

Thanks, a viewer from another video I did suggested that tip. 👍💯

Excellent tool and video of its use. Very satisfying

@Van_City

2 жыл бұрын

Thanks, this is the 2nd repair I’ve done with it and I’m definitely happy with the outcome

Have ordered one set hopefully will help me with my repairs. Tq for sharing 🤚

@Van_City

2 жыл бұрын

You won’t be disappointed these are great 👍

Think I can use it easily as a DIY blind guy? I have a bunch of ATV plastics to repair for my kids.

@Van_City

7 ай бұрын

💯 this will work for you 💥

Great Job, this is all new to me 👊🏻👍🏻

@Van_City

2 жыл бұрын

Thanks appreciate it 👍💯

Very Nice!

@Van_City

2 жыл бұрын

Thanks Brad. 👍💯

Getting ready to order one. I encounter lots of broken atv plastics. Sure hope this is better than the aluminum backing and rivets because it takes a long time and really doesn’t look good

@Van_City

2 жыл бұрын

Works way better than the aluminum backer and rivets. I have another video repairing my sons ATV fender that someone previously fixed with rivets that failed. It’s been good since I repaired it over a year ago now.

I know plastics production for many years. Putting water in areas to be welded is not a good idea. It makes bond weaker. Better use blast of cold air.

@Van_City

Жыл бұрын

Yeah if this was actually plastic welding I would agree. The water is to cool down the fastener and plastic so when it is removed from the gun it doesn’t pull the fastener with it.

@ThisTall

Жыл бұрын

Does rapid cooling harden the plastic like metal does? Making it brittle?

@Van_City

Жыл бұрын

I don’t think this amount cooling is going to affect the plastic

That plasticc weld staple gun works well, good job on the repair Dan 👍🍻🇦🇺

@Van_City

2 жыл бұрын

It sure does work well. Thanks for stopping by Dave Cheers Buddy 👍🍻💯

Wow. Pretty impressive that it didnt even budge when you flexed the plastic.

@Van_City

2 жыл бұрын

Yeah it’s a solid repair definitely a quality tool 👍💯

Going to order one right now. I wonder if this would help applying wire mesh patches in to plastics for welding? It’s a bit awkward and messy trying to push them in to plastic with a welding iron tip. But this may work both as a staple and an applicator for mesh patches. As long as they don’t get soft if heated to long?

@Van_City

Жыл бұрын

Actually that seems like that would work 👍💯

Is this a temporary or permanent fix? Like if I was to fix a crack in a rear bumper with this will it hold, or will it just hold for now?

@Van_City

2 жыл бұрын

My repairs have held up great. If done correctly there’s no reason why this wouldn’t be permanent

@ThisTall

Жыл бұрын

It’s safe to say this repair would be considerably stronger then the surrounding area.

That PIP image is covering up what you are actually doing

@Van_City

Жыл бұрын

I have a few other repair videos that should show the repairs better

Its hard to cut the staples once they are in

@Van_City

2 жыл бұрын

Yeah I usually follow with a grinder or file to remove what’s left after snipping them

@garyoa1

Жыл бұрын

@@Van_City Should look up a pair of end cutters. There are some that will flush cut.

@Van_City

Жыл бұрын

@@garyoa1 will do 👍💯

Do we really need picture in picture here???It gets in the way

@Van_City

Жыл бұрын

Have a few other videos uploaded if this one is not to your liking

@Day12My

Жыл бұрын

@@Van_City I love the video and am a subscriber. I was just giving input. A couple times I couldn't see what I was trying to look at.

@Van_City

Жыл бұрын

@@Day12My appreciate the feedback and the support 👍💯💥

Kinda blurry

@Van_City

2 ай бұрын

I have a couple other videos posted that might be better quality

I wish people when they make a video and say ("we're going to get right to it"), they would actually GET RIGHT TO IT!!!! instead of over 3 minutes of ramblings..........

@Van_City

Жыл бұрын

Yeah those people are aggravating, good thing there’s the ability to FF

@ThisTall

Жыл бұрын

Please let us know where we can send your refund…

Where you get the Plastic Weilding Gun , I need one to repair my Mower Plastic Pipe line Grass shooter/ Blower , Thank You

@Van_City

Жыл бұрын

I have links in the video description