Mate it doesn't get more detailed than this amazing work !! seriously even editing the video for individual parts and naming them ... unreal

You took the battery neg off yet you where able to start the car minutes later...magic !

When you buy the car and get the title do you sign it? Or do you wait and let the new owner sign the title?

@Centralcoastwraps831

3 жыл бұрын

Pink slip should be signed by owner before the owner accepts payment so all that has to be done is your signature

Best video online about removing a front bumper on BMW e93

Wow, excellent video. Super straight forward, very informative, and a great job capturing the hardware to be removed, during the process. Excellent work!!!

Can you make a video how to clean headlights the car that i have is a wrx and the headlights are just a little foggy

@BuddysDIY

3 жыл бұрын

Yeah I will make a headlight restoration video! Just been very busy!

@sosy7347

3 жыл бұрын

@@BuddysDIY Thanks

@ruskibruski

3 жыл бұрын

@@sosy7347 sand with 1000 grit then compound and polish the headlights Boom done

@BuddysDIY

3 жыл бұрын

I mean that's one way lol.

@ruskibruski

3 жыл бұрын

@@BuddysDIY this is the way

bro u gotta realize most the ppl looking this up is cuz they cant jack up their car unless the bumpers off LOL thats why im here shits way too low so the first step w the jack almost none of us r doing haha

Thanks for the video. I have one question though. Where exactly do you place your floor jack?

star bits are different to torx bits there are similarities but they are not the same. Thanks for the video seems like the right chore to get the damn thing off but atleast its all screws and not rivets or plastic clips!

Love the videos with e90 :) rn i need to put a kinda complicated lip on the bumper and i need to get it off 🤗

Good vid, short and to the point

You should use jack stands as well. Don't take any chances

@Notalliswhatitseems

Жыл бұрын

and if no jack stands available, throw the wheels you have taken off under it ;)

Thank you bro my second time coming back to this video every time helps a ton

Good video. I have an e85 3.0si z4 and just picked up a clean title 08 e90 for dirt cheap. I need to do some plastic welding to the bottom of the bumper. I put up a initial video up on it.

that plastic pannel that sits infront of the intercooler, would I have to remove my bumper to remove that? vid didnt show if that was held on by the inside or if I can just kick it out somehow

Thank you . Where do we place the jack to lift up both sides at once ! ?

To be completely honest I just took my bumper off but I can't seem to put it back on with the screws so I am going to just tape the top screws cause they won't engage

Thank you for showing both ways dude great video really appreaciate it 👏

2:15 No need to turn the car on to turn the wheels if both front wheels are in the air, they turn by hand.

As I removed my bumper a small rubber seal fell out. It's about 4 inches in size and fell from the drivers side. Can't find out where it goes 😖 was near the bottom near the vent.

@JuanTorres-pq8fd

2 жыл бұрын

Probably didn’t belong there lol if prob came from the engine that someone changed out and it fell down and got lost

Best DIY video out there.

great video real clear easy to follow when yo had the front liner out the way you could see the fog lights was there a reason you didnt undo them then ? once again great video

haven't seen so many adds in my life :))))

Don't you think that yeat should have consulted with Danielle bergoley about catch me outside

Thank you for a detailed description

@BuddysDIY

3 жыл бұрын

Absolutely!

I have a 09 335i sedan. I need to replace the front bumper. How hard is it if you have never done anything like it before?

@BuddysDIY

3 жыл бұрын

Follow this video step by step and you should be alright man. Just take your time

Perfect tutorial

So what if I can't turn the car on?

Why did you suggest loosening the nuts before lifting. What is the reason for this ?

@fatkat311

3 жыл бұрын

If you try to loosen the lug nuts while the car is lifted in the air the entire wheel will spin and not allow you to loosen it unless you use an impact gun.

Thank u..very clear guide

Thanks a lot for the info. Appreciate it

Thank you!

excellent video

Are the bolts underneath the car 8 mm as well?

@BuddysDIY

3 жыл бұрын

Yes!

Did you jack it up by the skid plate?

@BuddysDIY

2 жыл бұрын

No. There is a spot in the middle a little bit back

Appreciate this!

🔥 video dude, thank you.

e90 can use e92 fender??

@mcandrewkeith9

2 жыл бұрын

No

you must have reconnected battery to start the vehicle.

Bruh yuck time to buy a another bimmer

@BuddysDIY

3 жыл бұрын

Had it for 6 years. Gonna get this thing to 200k easy

LOL U don't need to take 50% of the stuff off

Goooood gay!!!!!! 👍👍👍👍

So not e91?😂

@BuddysDIY

3 жыл бұрын

Probably very very close

@Mysohvaperuna

3 жыл бұрын

@@BuddysDIY i would think so as its pretty much the same car but wagon

не тачка а колхозная дичь)))))