Just a small tip for someone planning on doing this. I have cluster that is 1999 and I do not have pin above "car" to light up whole cluster's background. So you just need to connect power(12V) to pin 7 on black connector and obviously ground😁

amazing attention to detail every step in procedure. keep it up.

Wow great job

I'm amazed at the detail..I'm trying to change cluster colours on a daihatsu copen..dont like the orange...I've learnt so much from your video...shouldn't be too different I guess..thanks again. Great work

@CroVlado0510

Жыл бұрын

Most of this should apply as long as they use surface mount LEDs. Match the type of LED and take note of polarity and you should should be good to go.

Man you seem like a cool dude, you want to work on any projects let me know I'm always doing something or another on the e46. Glad I found your channel

@CroVlado0510

Жыл бұрын

Appreciate it. My focus seems to be all over the price. Got some home projects to do, still have some more buttons and other car things to do, on top of just work and family balance. I need to finish up on the car soon.

Good job!

Subscribed .

Looks awesome!! But i kinda still prefer the stock fore some reason. But Still! Looks great!

Great video, it will help me a lot when i do this, just got my e46.. Can you send me some link from aliexpress because i can’t find what smds to use ?

What if you use white leds instead of orange ones on the display? Will the numbers become white ? I would love to have white leters with black background, looks much more modern

The only thing about this that I don't like is that you lose the classic orange BMW glow, but the LEDs make the numbers so much more crisp and clean. Might do this but with amber leds instead to retain the color

@CroVlado0510

4 ай бұрын

Well then you wouldn't do anything because OEM is amber LEDs. The whole car is amber LEDs for the most part.

I cant get the bulbs on either screen cluster and hvac screens to light up anyone have any suggestions. Thank You

Need help how did you add the red diffuser sheet onto your needles ? You said you cut them into holes ? Can you elaborate further as I am going to do this retrofit soon and just needed some clarification. Can converse through email if wanted.

@CroVlado0510

Жыл бұрын

Turn the needles over and cut red diffusion sheets in the shape under the needle so it fits over the center hole where it attaches to the cluster. Slide it in there and put a tiny dab of hot glue in there to hold it in place. If you cut it tight enough it can use surface tension against the hole to keep it inside but it’s though to cut that small hole perfectly. Hope that makes sense.

Have you tried polarizer film on LCD screen to get it white color?

@CroVlado0510

7 ай бұрын

I haven’t

Great videos, amaizing details. But i have one question. How do i know where is possitive and where is negative on the board? Also i have some 3528 white SMDS. Will those work? Thank you for your time.

@CroVlado0510

Жыл бұрын

The LEDs are marked with a cut corner. They may but I don’t know if they’ll be the same brightness. Considering they’re a couple dollars on aliexpress there’s no reason not to use what you take out.

@enciumarian2112

Жыл бұрын

Thanks for your reply, i figured that out afterall. I managed to replicate your work fallowing your steps. Thank you for my ‘’new’’ cluster.

@CroVlado0510

Жыл бұрын

@@enciumarian2112 that’s great! Hope you enjoy.

Hey man they look great! What kind of LEDs do you need? Ive been looking all night trying to see what i need to order

@CroVlado0510

2 жыл бұрын

PLCC-2 will cover the instrument cluster

@kwstasfitness

Жыл бұрын

​@@CroVlado0510hello with 2 pins or 4;

@CroVlado0510

Жыл бұрын

@kwstas 2 wide pins. They cover almost the whole side off the LED. Type in PLCC-2, the 4 pin version is multi color and is PLCC-4

@conmartin754

Жыл бұрын

@@CroVlado0510 goofy ahh i ain even got a beamer no mo

@CroVlado0510

Жыл бұрын

@Con Martin, what are you even going on about? Who’s talking to you?

Nice... Have you done this on the Climate control module?

@CroVlado0510

11 ай бұрын

Yes

Does anyone know where to get the colored sheet of plastic for LCD screen? Please I need help 🙏

@CroVlado0510

Ай бұрын

You can order them on Amazon or other shopping services

Hi can you send me the link for the LEDS my 2015 x5 the right signal light went out.i also have 2002 m3 and i want to try this kind of tuff.great job please let me know

@CroVlado0510

9 ай бұрын

There is no particular link. Search on eBay or AliExpress and buy the LEDs you need for your project. If you need help identifying LEDs, a search engine will be your friend. Good luck with your project.

@elbaron51

9 ай бұрын

Thanks for your reply I will subscribe to you can you tell me the LDE You use on the M3

why removing the orange backing from the lcd screen when it will still be orange in the end?

@CroVlado0510

Жыл бұрын

It’s red in the end. Not sure what display you’re watching on but it’s color accuracy may be off.

Hey man what all leds did u use for everything you did

@CroVlado0510

2 жыл бұрын

For the cluster you only need PLCC2 (also called 1210).

@kevinsmith4924

2 жыл бұрын

@@CroVlado0510 OK cool.. What about the window buttons and heat and air control and the headlight switch

@CroVlado0510

2 жыл бұрын

@@kevinsmith4924 I’ve made videos on the hvac and windows, working on the headlight, it’s a bit more involved.

@kevinsmith4924

2 жыл бұрын

@@CroVlado0510 yea I knw i just need to know what all kind leds for all of them so I can order me some

@CroVlado0510

2 жыл бұрын

@@kevinsmith4924 it all depends on if you you’re going for direct swaps or more of a custom. Again if you watch and listen to the videos I did explain all of this. If you’re going for direct swaps you’ll need 3mm, 5mm, 0805, 1206, and PLCC2

can this be done to e39 ?

@CroVlado0510

8 ай бұрын

Yeah

Hello Sir, I am from Germany would you accept a customer? i would like what you did on your Cluster to be done on my E46's Cluster also.

@CroVlado0510

Жыл бұрын

Honestly I don’t think it would be worth the cost. Shipping from Germany to USA and all the way back would probably be expensive on top of cost to do this work. You can message me on discord if you want to talk about it CroVlado#8786

How much would you charge to do this ?

@CroVlado0510

2 жыл бұрын

What are you looking to get done? This is just the first video posted. I’ll be putting up the hvac, and rest of the car soon enough, waiting on some LEDs to arrive from overseas

@GEESKIII_

2 жыл бұрын

Led upgrades and painted needle

@CroVlado0510

2 жыл бұрын

@@GEESKIII_ sorry lost traction on this. $100 for LEDs another $100 for needles, plus cost of LEDs if other than white and shipping here and back. Unfortunately not cheap but it takes a couple hours to do it all.

@eastsideofthetracks8311

Жыл бұрын

@@CroVlado0510 I want this done on my car it looks really cool I will contact you when I got the money to spend

Where can I buy these LEDs?

@CroVlado0510

Жыл бұрын

Lots of places. AliExpress, eBay, Amazon, LightHouseLEDs, etc.

@martindimitrievski4348

Жыл бұрын

@@CroVlado0510 can you throw me a link of the ones you used? Thanks!

@CroVlado0510

Жыл бұрын

I don’t have one. I just typed in what I was looking for in AliExpress and clicked the one with most sales and reviews. It’s all the same.

@martindimitrievski4348

Жыл бұрын

@@CroVlado0510 they are called SMD led right?

@CroVlado0510

Жыл бұрын

PLCC2 smd led

Hey man I want you to do mines I will pay I tried doing the needles I did exactly what you did in the video I got the same results by taking my cell phone flashlight and putting the Needles behind it and I saw the same results you got with the needles. my only issue is I am afraid to do LED bulbs I tried installing the red needles with the original orange and got different results would like to do an official makeover with my cluster I want your info man please get in contact with me please respond to this and let me know where we can take this Conversation elsewhere thankyou !

@CroVlado0510

2 жыл бұрын

What’s up, man? How can I help ya?

@vincentsgro3348

2 жыл бұрын

I basically tried doing what you did I got the same results with the needles I practice on some three series Needles and they came out pretty decent then I use my cell phone background light and put the needle up against it and I saw the exact deep rich red that you saw and got the problem is I’m afraid to do the LEDs I want to do the whole conversion just like what you did that cluster reminds me of a newer cluster or let’s say out of an E 60 M5 I want The same look that you got and made what do I Gotta do to ship out my cluster to you lol i’ll pay for the whole thing and pay you whatever you’re asking

@CroVlado0510

2 жыл бұрын

@@vincentsgro3348 I’m not sure how much this is worth it to you but I can do it. Message me on fb and we can talk about color and whatever else. facebook.com/vlado.mlakic

@vincentsgro3348

2 жыл бұрын

@@CroVlado0510 excellent thankyou

Hi how much would you charge to do this

@CroVlado0510

5 ай бұрын

Wouldn’t be worth your money honestly. I value my time quite high and shipping back and forth would put the price way out of what it’s worth, in my opinion.

@killerb276

Ай бұрын

Even if I’ was happy to pay the costs & have everything done like you have on your own car light switches etc

Hi, what are the sizes of the leds?

@CroVlado0510

Жыл бұрын

PLCC2

Amazing vid brother what’s ur ig I just have a question because my temperature gauge for some reason stoped working

@CroVlado0510

2 жыл бұрын

I don’t have insta, I have fb mostly for some car groups. I don’t stay active on social media.

@husamalkaifi6500

2 жыл бұрын

@@CroVlado0510 just messaged u on Facebook

@S54M3Yavuz

2 жыл бұрын

Dont push the needle all to the bottom. This is the most mistake people do. Its stuck then...