Looking good! Welding blankets and a fire extinguisher wouldn't go a miss 🤣

Boq - “I bought a welder” John - **gulp**

@earnestbunbury2103

2 жыл бұрын

An LGBT welder ...

Shoutout to this guy jack who literally came out of nowhere onto the channel

@bazza1332

2 жыл бұрын

real ones remember jack from the gti

@lukepalmer2126

2 жыл бұрын

@@bazza1332 when he was still a child 😂

@Jordan_5M

2 жыл бұрын

Is Jack not related to Tommy?

@AndersMcTee

2 жыл бұрын

Jack needs his own show. Call it ‘Jackmonkey’ or something 😄

Certainly getting the 'crackle' and penetration of the weld. A tip would be to 'push the weld' along with a stiring motion, you'll get a smoother and deeper penetration of the weld bead as a result. Definately dress the welds back with a flat wheel on a grinder and hit it with some weld through etch primer soon as you're done before any rust forms. With thicker plate (3mm or thicker) you may have to bevel the edges to create a 'V' channel that you can fill up with weld, by doing this should allow you to get max penetration. Gas choice can make thing easier as CO2 can make it a bit tricker to get decent welds where as Argon will give usually pretty decent welds. Of note with PPE, DO invest in some thick welding jackets and chaps unless you fancy getting burnt from sparks, better to be hot and sweaty than down A&E with a weld burn. Just a few tips from a mechanical engineer and former techie.

Weld look fine plenty of penetration they won’t go anywhere, I will say next time cover up any glass and paint it only takes one spit to hit your windscreen and will smash as well the sparks melting onto your paint and rusting. Love your channel keep it up and hope to see the e36 around Gloucestershire soon 👍🏻

Hi I’m a welder fabricator and them welds are decent but you needed to turn your heat up on the welder or instead of turning the heat up turn the wire speed down and go slower because your getting what’s called a spine effect which is where it bunches in the middle of the weld but other than that there good welds

The excitement on you guys faces when the bonnet shut makes the whole thing worth while. Nice job boys 👌🏻😎

This is a whole new era. Watching the webisodes back however many years ago, I never would've thought I'd witness you become a fabricator lol, but I'm here for it! Also happy birthday in advance.

The V8 looks at home in there! Nice welds and can't wait for more of this build

Impressed by the welding skills and by how well that V8 fits under the bonnet, sick video as always.

love how oem that v8 looks in the e36, the meet was awsome, was very cool to meet you and give you some stickers, will for sure be at the next meet.

You boys are making *PROGRESS* giving me motivation to hurry up with mine now

@HarryJames89

2 жыл бұрын

Your build is awesome dude! Subbed 🤙🏼

@SeeMeSidewayz

2 жыл бұрын

SUBBED! doing the same swap on my channel CHECK IT OUT! as well new video out soon, cant wait to see all our m62 e36 RIPPIN!!!

Super sick build!! Suprised how "easy" the V8 goes in there.

Living the dream mate. Mad progress on the build already, can't wait to see your faces on the first startup.

Long time watcher and I’m actually stoked for this build! Happy birthday :)

The fact you organised such an event is something to be hugely proud of!! Well done Guys at Boqer123!

Car meet was great! Glad you liked the T-Sport 😉 Great video!

Love the fact that it will still look clean when your done , this pouch thing is well good

Looking good mate, loving the progress on this.

Had an amazing time with the club at your event ! see you next year !!! CHEERS FOR THE PICTURES ! Lol

The car meet was sick, first one I’ve ever been to, will definitely be going to more!

Cheers for a sound meet Boq, was mint meeting you and the OG crew (as well as current). Need more toilets and food vans next time though 😉😅

Impressed with those welds! Good progress in this video. Have a great birthday!

Again smashing great content buzzed to see the V8 up and running

Going great. Well done on the fresh welds look 👍🏻

Enjoy Cornwall stay safe can’t wait to hear the v8 up and running

Never welded before and want to get into it, the fact you just bought one and jumped right in has given me a kick up the arse. Have a nice time down Cornwall and set off early, the M5 and A30 is a fckn nightmare this time of year 😄

Sick, cant wait to see it fired up!

Sick video man. Have a great birthday !

Quality stuff mate. Looks great 👍🏻

Great show & loving the v8! Can’t wait to see it rip!!!

Can’t wait to hear that v8 fire up👌

Congrats on the engine install and Happy 30th mate have a sick weekend. Not literally....

Round style glasses look sick imo, great to see the V8 progress. My car is currently broken, but will definitely come down to the next meet!

Ahahaha when your welding is cleaner than the last guy who was building your cages. That’s funny 😂😂

V8 looks bang on Happy 30th mate enjoy the break with the parents!

This channel is just so nice and so relatable, beeing in a garage with your mates although you def get more stuff done 😂

Im a welder and u have done a nice little job , love the content keep it up lads

Can’t wait to see this working!!! 😎

Can't wait to see this thing start up after all the work!

Amazing video as usual Keep up the good work

Love seeing the whole process on video! Gonna be sick when it's done 😎

She’s coming together nicely. I think you definitely need to invest in a fire extinguisher mate

Loving this build! Spurring me on to get on and start a project like this🤙🏼

@SeeMeSidewayz

2 жыл бұрын

do it man, doing the same build on my channel rn, check it out you wont regret doing this swap lol

Looking forward to seeing and hearing the engine start up.

happy birthday mate, i live in cornwall and the first video i watched of yours was about you going to boardmasters! learnt a lot about the sweet amber nectar. Have a good one

Can’t wait to hear it !!!! 🤙🏻🔥🔥

Thanks for a great car show it was amazing 🤩

Enjoy your time away love the builds would love the glasses as my last bqr ones got sat on

Only thing I hate about this channel is that there isn’t enough videos love watching you dude!

This is a sickkkkk project can’t wait to see it on the road

Nice work guys👍👍👍

V8 is sick dude! Can’t wait to see this thing run!

Happy birthday Josh, have a lovely time in Cornwall mate

Good job buddy 👍 I love that yas do it all your selfs only way .. can't wait to hear that V8 beast ripping

nice, not a bad job at all on those welds. Welding blanket would be a wise investment plus you could use it as a duvet when you kip the night, lol

Enjoy the week off lad, loving the content. Big ups from NZ

Mad seeing your R-Tech parcels in this vid because I saw them come through DHL, it’s a small world 👊🏼 E36 is looking mint 🤟🏻

looking forward to the finished product going to be unreal boq

V8 is gonna be crazy can’t wait to see it! Best channel on KZread

Happy Birthday man!

Yes boq !! Looking sick!

Mate, wear a long sleeve, you’ll get really bad sunburn from it and trust me it ain’t good but keep playing your settings like wire speed and what have you

nice work! only just stumbled accross this channel! epic

Wow that was an amazing first weld!

Can’t wait to hear that V8 bro

V8's sick! Those are some very nice welds for your first time, mine were way worse when I first started welding.

Wicked video happy birthday 👌

Yo! meet was dope! crazy to see the turnout and support! loving the videos at the moment! keep it up!

sick boq! ya love to see it

honestly live for these videos

can’t wait for the start up of this thing! Also your welds look better than what was on the cupra’s old cage 🤣

Loved thar car meet! Always a good day when theres a BQR video in the sub box

Your 30! Jesus I’ve been watching your for a long time. Have a good one man, good vid.

Welding skills 👍🏼👍🏼👍🏼can wait for V8 skids :)

Fairplay on the welding man. Some of the best novice welds I’ve seen!

That V8 sits like a glove! For the first time welding not a bad job! Hope to see that bad boy start in the next vid

That V8 is going to be Awesome 👊👍 Not bad welding at all 💪

All the progress!

Great bit of welding for a beginner.....100% better than my 1st attempt 👍

Considering boq doesn't weld.. they definitely aren't the worst welds I've seen.. congrats to boq for progressing how he is tho.. its good to see

Just what I was waiting for!

Content is getting better , he’s like a uk Jimmy Oakes

Such a sick idea to stick a v8 in it 👏🏻

The meet was insane best meet I’ve been to in ages!

Love this video bro!! And I'm a Newquay boy too with an E36, currently sourcing a new engine where you to in Cornwall

Those sunglasses are sick and the BMW looks lush these vids make me want to spend all my money on merch and cars 🤣

this V8 gunna be rad asf !!!!

Ngl the welds are actually decent, also have a good birthday:)

Nearly spat my tea out when you said it's your 30th

With MIG welding you should be pushing your weld into the material and not dragging, if you was to be using flux cored wire then you'd be fine, I'm a welder by trade but it's all about practice and learning your welding set ✌

Good choice in welder mines took some serious abuse. Just heard the test sounds like the gas is way to high

You digging the round frames tbh might have to order a pair

Cant wait to see that thing out ripping skids with that v8!

In fairness boq, you’re welding like a champ 🤙

Happy birthday Josh!

I don't know anything about welding but none the less I'm super impressed

Get an extractor bought, welding fumes can be deadly! Keep up the mint content 🤙🏽

V8 is sick. Side mount exhaust ya!

thank for pouch link need for parts for my 2000 vw passat 1.8t Project euro style can wait to see bmw v8 doing some B road bashing keep up the good work