E30 ITB Install Part 3: Syncing the Airflow
Автокөліктер мен көлік құралдары
Finally getting to the point of being able to sync the airflow through the ITBs on my BMW E30. Working through the different sets of throttle bodies to get nice even air flow to all cylinders. So nice to be able to get the car running smoothly.
Instagram: @reichart_automotive
Gear used to make this video:
GoPro Hero 9
amzn.to/3OHHaKQ
Nikon Z50
amzn.to/3yncnNY
Sigma 18-35 for Nikon
amzn.to/3QLAU6y
Parts used in this video:
Throttle Cable BMW
amzn.to/3RWxluP
Airflow meter synchrometer
amzn.to/3PtG9Gb
As an Amazon Associate I earn from qualifying purchases. Potential commission earned from links.
Пікірлер: 19
Love watching your progress man, can’t wait to see it drive!
@reichartsworkshop
Жыл бұрын
Thanks for your support! More to come soon.
Wow! This is exactly the info I was looking for. I didn't know how you actually set up the ITBs, this makes so much sense, I'll order a syncrometer, thank you 👍 subscribed 🙏
@reichartsworkshop
Жыл бұрын
Thanks for the support!
Yess!! a new upload : )
@reichartsworkshop
Жыл бұрын
Hey, thanks for tuning in!
Keep up the good work
@reichartsworkshop
Жыл бұрын
Thanks for your support!
Idle at 14.7 then if the rpm still high then adjust timing decrease until the rpm is good or you get a misfire
How did you adjust the middle pair to pull the correct vaccum?
@reichartsworkshop
Жыл бұрын
Start with that one. You’ll have adjustments available with the position of the arm up to the cable, position of the throttle cable, and the position on the J hooks that connect to the outer pairs.
Молодец!
@reichartsworkshop
Жыл бұрын
Thank you!
Mine won’t sync to equal value no matter what. Rhd said it’s about right but I was expecting to be able to reach a flat out number in every single throttle
@reichartsworkshop
Жыл бұрын
Mine are fairly close but maybe not exact. The tool doesn't give a precise readout. I adjusted the middle pair first without the outer pairs on by blocking the extra cylinders with carboard. Then installed the outer pairs and adjusted accordingly. That gave me the closest match.
@noodlezdotcom
3 ай бұрын
@@reichartsworkshop how do you know what number the sychrometer needs to be at when setting the itb?
@reichartsworkshop
3 ай бұрын
@@noodlezdotcom at one point I thought I saw it on the RHD website, but I think the most important part is that all throttle read the same
Glad I'll not be tuning these lol
@reichartsworkshop
6 ай бұрын
Just a bit of time and patience