Stamping the axle with info and marker that’s awesome pride in work and standing by what you do hats off to Adam

@jkustockaphobia2421

4 жыл бұрын

Jon S hell yea !

Its coming together!!! This truck is going to be badass! Much love from Louisiana

Really enjoyed this video. Good to see some build footage. Makes me wanna order some axles from northridge !

All these upgrades are amazing. Huge fan of upgrading the axles! I’ve wanted to run an air compressor for a while now.

I love what you guys a doing. Bringing the off road community together.

Every time I think this build can’t get any better you bring something I didn’t see coming! All the rad is being put into this build!

Awesome guys! Never doubted you guys! This gladiator is ready for a full on expedition. Be safe and stay healthy.

You guys have built such an amazing ride, it's so great to see everyone and everything coming together for a dream come true for some lucky person!! 🤟👀🤟❤❤❤

Such generosity for having never even met me! 😂 This thing is turning out to be way more than I thought. Thanks for even giving us the opportunity to win it. Take care and stay healthy.

NO denying, that man KNOWS his business!! True GEARHEAD

Wow it’s even more Badass now! That was a great video of the gear install. Adam is awesome and my next regear will be done by him. I live right across the Puget Sound from there but I’ve never been to Northridge 4X4 but have purchased many things from them. I’m going to get over there now. Glad to see you guys wheeling at Elbe and hopefully you put out your video of it. Stay safe from the virus.

I love how you’ve built my gladiator. Can’t wait to try her out😁

Thanks for showing the ring/pinion setup in detail. Awesome video.

Several coffees gave their lives during the production of this video...

Just when I thought it couldn't get any better you install the DynaTrac front axle!! I love it!

Thank you guys for putting all this effort in my build 😆! My disabled butt is gonna have so much fun adventuring in this sweet machine!!! Thank you again 😆😉

Glad to see you put 44s instead of those massive 60s and 80s like the stepchild. I'll be using the jt for a daily driver and mpgs are a small concern.

I love you guys, enjoy living vicariously with you, great adventures and fun.

When you walked through the door and showed that Hemi box, I got very excited, then realized you were just showing off the showroom.

@jodyfranklin3891

4 жыл бұрын

Same here.

Great job so far! Can’t wait to see the finished version.

It's been months and months since I first heard about that bracket from Northridge... glad it's finally in the flesh and available soon!

Just drooling over this build, wish I could afford half the stuff going into this gladiator for my Jeep, super kick ass y’all! It looks amazing!

Thank you for the great video on E3...it’s awesome !!!

On my JL I put the arb under the passenger seat. And it's great because it is cooled by the floor air vent Ac as I'm using it. The best thing is that arb makes the bracket under the seat and it some what muffles the sound.

I want that air compressor bracket bad!!! Thank you northridge!!! Dope video fam! Stay safe!

What an awesome build! You two are so much fun!

Very awesome Vid, I'm not a huge Jeep fan but the information y'all share is pretty darn awesome.

Keep those upgrades going!! Can’t wait for it to be mine. 😜

Awesome axles! 🤩 Dynatrac is only way to go. Made in USA!! Great video guys. Gladiator is fan freaking tastic! Looks like a great bunch of people at Northridge 4X4. Looks like Jelly is having a fun time to. See ya on the trails.

Glad to see y'all posted a video to take our minds off stuff. I will not be going home till this stuff pass possibly. Us truckers are on full blast. Looking forward to the next video. Till next time stay safe and keep the Shiny side up and the rusty side down.

You guys are the best! Great choice on all the parts and excellent job of showcasing and explaining them to us! PS: I saw the Step Child on the lift back there ;)

That's one awesome front end. Thanks for the video 👍🏾👍🏾

Good thing you mentioned the disclaimer in the beginning about this filmed prior to Covid 19 mandates. I'm sure some people would have spoken up about it otherwise! Great video and nice axle upgrades. Cant wait to see what else is coming.

Awesomeness...she's coming along real nice, lots of upgrades and strong parts for her....Foster child is turning into a beast....Krzy outtakes Brittany....Kevin 1 more rep💪....Jelly 🐶is so awesome.... CD ant wait till your next video....Safe travels

Mohoney- a Professional with an actual cool personality! Awesome job!

Great video. Hope you guys are staying away from the hot zones up there in WA.

I love to see expert workmanship! Nice job! I need to start praying to win this! You go Jelly!!

Hell yeah! I’m going to wheel the hell out of that thing once I win it. Thanks for all your hard work guys! Keep the vids coming.

Hootering? For me that usually means decent wings and great scenery.

@trjnsd6874

4 жыл бұрын

...I love rolling hills scenery...

Very cool! Its coming together very nice.

Jelly in a box ! Nice Bear impression Kevin ! Roam offroad bed boxes !

Jelly Bean stole the show again. The Gladiator build is turning out better and better each time you have the build stages. Northridge 4x4 has a really nice and clean shop. I like their store area in the beginning of the video, felt like a kid in a candy/ toy store. I agree with another comment, that you can tell that Adam displaces his pride in the work he does. Nice outtakes and Be Safe!

The step child is coming along real nice. You are doing some super mods to it. Thanks for sharing the updates on step child am totally enjoying your vids.

Stepchild is freakin dope! I just got into off-roading, and Jeeps are expensive so I bought a Humvee M998. Got lots of time at home now because of Covid. This is a good time to do some much-needed wrenching on my rig to get out there. Keep up the good work guys! See you on the trails!

@nicholassbardella6045

4 жыл бұрын

Big Poppa not trying to seem like I’m hating but you bought an old hmmwv over an old jeep? Good luck man they’re not cheap either

Cool! Did you see that Cassy from Jeep gear is putting that same axle in her TJ? Looks like dynatracs are the way to go.

oh my goodness folks, this Gladiator is and will be such an awesome build and whoever wins this beauty will get a kickass rig. Some of us are stuck at home and sound a bit cranky based on the comments. Pretty sure you all are voluntarily following LiteBrite and Jelly Bean. I love their videos and adventures! Keep up the great work!

Wow Adam a wealth of knowledge

I can't wait until you deliver my Gladiator!!! I like what you are doing with it. :-)

Cant wait to drive this thing guys!!! Thanks!!!

Congratulations guys

I would have put out tube end seals on it if I was investing that much into the axle. Which I hopefully & likely will be some day in the future for a solid axle swap. Not sure of the exact axle I'll use yet but will be long arm with coil springs.

Is a change to the transfer case on the build list? You know, since the sport doesn’t have the 4:1ratio

It's going to be awesome! Someone is going to be a happy camper when they win it.

Seen those axles go into your buddies brothers ride a bit ago

This Gladiator is BADASS!!!!!!! CAN'T WAIT TILL I MEET YOU GUYS AND TAKE THE KEYS TO MY NEW AWESOME GLADIATOR!!!!! YOU GUYS ROCK!!!!! LUV YA BOTH!!!!!!!

This truck is so amazing! I'm sure if it became mine, i would ugly cry out of happiness! 😭

You two are building me an awesome Jeep Gladiator.

The only time u want a vehicle already done up , is when it's like this 😁👍🤙, it's a dream to have this ...

Awesome video guys! And ooohhh that Jelly! Lol

No kidding you guys be safe traveling all over right now

These guys know how to build a diff. 🇨🇦

Damn, Adam is the man. Very informative!

When ya walk into the store and show Kevin stroking the piston🤣

I was literally about to go to bed and then the alert came of a new video from Lite Brite had been uploaded. Sleep is for the weak anyways.

@philiphannum4211

4 жыл бұрын

Joshua Rounds I am so lucky to live where the videos wake me up in the morning. Rest well.

Awesome channel you folks are very likable

What an awesome build , when are you coming to Australia and which state are visiting would be great to see you guys when you are here.

@LiteBrite

4 жыл бұрын

We were supposed to come in May, but our flights have been grounded. We’ll have to reschedule 😢😢

@clarescreaton7772

4 жыл бұрын

@@LiteBrite ok well make sure you update when you are which I know you will ,you love Australia.

Please tell me y'all did 35 spline RCVs...might as well have being that it was built from scratch.

Can’t believe I missed you guys in Silverdale!!! Dangit!

The fender removal sounds satisfiying.

Over the top build LB!

Just curious. Why drill out and put 1/2’’ bolts. Is this something I need to do?

What can I say? Can't wait to have baddest gladiator in the game parked in my garage! Thanks guys!

Just saw you both truckin' on hwy 18, near Covington...not such a small rig set up..lol! Be safe!

@LiteBrite

4 жыл бұрын

Awesome! Yeah, it’s a decent sized setup now. Haha

Glad to see y’all putting good stuff on it ! How come no rear axle upgrade tho ? Btw why is the rear always bigger ? Such as y’all puttin a 80 in the rear and a 60 in the front

@MrMe1280

4 жыл бұрын

Front end doesn't do much work. Its just not needed to have as much power up there so why not save a little cash and weight

@jkustockaphobia2421

4 жыл бұрын

empty pockets I gotcha thanks man

That is awesume!!!😳😳😎? the Fosterchild is becoming a beast... Man I really want to win it and I be proud to drive it everywhere...

Please give it to me! LOL because you know I love you guys! Back to the video. Kevin did do a good bear impression. I saw a box that said HEMI on it and some other cool stuff. Will it go in? Win or loose, it sure is a lot of fun seeing it be built and there's going to be one lucky Gladiator owner soon.

Looking good guys

I'd love to see specifics on the plumbing of the compressor. :) Pretty Please! :D

2.5T RPM steering for JK/JL/JT. Check into it.

Wow...just wow!

Did anyone else notice that the stepchild was on the rack too. Awesome video. You two keep them coming.

@LiteBrite

4 жыл бұрын

Just oil change and checking nuts and bolts...for now.

Great video thank you!

Well if for some reason you guys need to get rid of some axles, I’m in Utah ;) haha jk awesome build! Love the channel!

Ok I'm officially please with the fosterchild it is badass..... maybe just a hemi next PLEASE.!!!! Oh love the jelly 😍

Curious to see how much will all this cost on average, if Northridge installed?

Please tell me where I can get that Compressor Mount for my JLU! I built my own based some pics from the DV8 mount. I just added the EVO coilovers and had to remove the compressor. I placed the compressor in that orientation and believe it will work fo me. Please tell me where to find one. Thank you

@bigK124

4 жыл бұрын

It is a Northridge4x4 product, although not quite available yet. Very soon though.

I know this is an older video but did y’all do with the stock housing or the 3+ lift unlimited housing ?

Damn, this is getting good

My new gladiator is looking good.

Great video

Going to sell a few Harley's and get us a Jeep! Time for some new adventures! ;)

Are you gonna put a jl audio system with a sub in there

This will be my 2nd Jeep to climb Mt Washington "YOUR WELCOME"

Get em Jelly get em

What’s wrong with being too deep? LMAO Kevin is the GOAT!

Kevin ,, you two are in Beer and Wine Country ! Try / have several Death by Irish beers for me ! 👍👍❤❤ Iron Horse Brewery 😁😁👍👍

@VetJeeper

4 жыл бұрын

Kip Welch My favorite beer!

I just seen a video of y'all breaking a drive shaft. Did y'all post your own video of that "pickel" yet?

@LiteBrite

4 жыл бұрын

Haha Not yet. But it’s coming.

I just saw a video of the other day of someone putting a hellcat supercharger on a 6.4 l so it's like a 392 scat hell scat pack

It would be nice to have an idea what these upgrades would cost for us at time of filming with labor.

Did you replace the rear axle as well?