Bought mine about 8 months ago and finally getting around to building it. Thank you for your dx commander build videos!

THANK YOU! Not only for the awesome videos, but for introducing me to those wire strippers! Those are a lifesaver!

I enjoy your video of this as I am also a visual thinker. Your videos in this series really helped me a great deal so thank you!

Great videos! I just started assembling mine tonight and these videos really help. Thanks!

@radiorants1094

4 жыл бұрын

Thanks for watching, hope they were of help.

Great series. Watched all in 1 sitting. Very informative and well put.togather. callam should put ur video on his channel as well Again well done!

I'm thinking of making a copy of this aerial, a vertical aerial like this or mag. loop away from the houses and QRM might be better than dipoles closer in. I suffer from bad broadband QRM. The loop can be turned away from the QRM but unfortunately most signals come from Europe and that's the same position as the least QRM. I can't get many radials for a vertical as one half is a communal path so they could only come into my small garden. Vertical or loop? Try both and compare! I agree about the proper crimp tool, I bought mine many years ago to re-wire some of my old Land Rover wiring. Although the wires can be soldered without crimping as well. G4GHB.

Update to my comment below. I tried a resonant 20m vertical today against my h/b mag. loop with the following result; on the vertical noise was S8, loop noise S8 down to S4 when turned away from the noise source. A USA station in noise on both but clear on the loop when turned away from the noise source. He should be loud using 1 kW and a 5 element Yagi! It looks like the mag. loop at my QTH is better and verticals are known to pick up noise. Maybe tx on my dipoles for better efficiency and rx on the loop for less noise. The DX Commander seems to work well for other people but not good for me with this QRM. This shows I just can't have verticals. G4GHB.

2022 update- No need to smooth burrs on the metal plates anymore - Callum now has them tumble polished before shipping

Excellent instructions. I have a “third hand” which is nothing more than a weighted base and alligator clips. Makes soldering wires and connectors so much easier. Check Amazon. Cheers

@radiorants1094

4 жыл бұрын

Hi, thanks for watching. Glad you found the video informative. Thanks for the tip on the third hand, I will check them out. 73 DE 2E0XSB.

Very informative video on setting up, on the elements did you use heatshrink for a good seal... or not needed so i know when i build my DX C when it arrives thanks great video

@radiorants1094

4 жыл бұрын

Hi Mike, I did use the heat shrink as I built it to the word of the instructions from M0MCX website. If you use decent insulation tape it does hold just as well but not sure how well it would hold after time and weathering. 73 DE 2E0XSB

Callum uses 30 radials at 17ft each. You used 30 at 3.5m. Did you add more for 80m?

Jubilee clip I thought they where hose clamps

@radiorants1094

4 жыл бұрын

Hi Paul, In the UK we call them jubilee clips. I dont know why haha, thanks for watching. 73 DE 2E0XSB.

Was their a part 2? A92GW

@radiorants1094

4 жыл бұрын

Hi Thomas, thanks for watching. Part 2 will be out early next week. hope you see it 73 DE 2E0XSB.

@ae1tpa92gwtom2

4 жыл бұрын

@@radiorants1094 thx Mate, cheers 73s