Thanks for making my weekend. I got a new dose of Mike Farrington's humor , wit and ingenuity. It was very much appreciated. You Rock Mike !!!!

@DavidAKupka

4 жыл бұрын

I do like the new format of videos also. I liked the old style but the extra Punch of Mike in your face , Hahahahaha is a nice touch.

@MikeFarrington

4 жыл бұрын

Thank you very much.

I really appreciate the pipe layout measuring tip.

@MikeFarrington

2 жыл бұрын

Glad it was helpful!

i have a set of those crimpers...funny how people are baffled when they see the tool sitting on a bench. i used them for crimping gutter spouts. Kids are super cute, what a blessing.

@MikeFarrington

4 жыл бұрын

They are a pretty neat tool for sure. Thank you.

That boy going to have such nice memories of his dad and that shop... I can picture him in his bed at night reliving the days adventures with his dad and thinking how he is really going to be a bigger help tomorrow. Good Stuff brother!!

@MikeFarrington

4 жыл бұрын

Thank you. I hope you are right.

Great video Mike. One of the more sound videos out there about dust collection ducting.

@MikeFarrington

2 жыл бұрын

Glad you enjoyed it

I got a pneumatic riveter cheap at HF (around $30) when I did my dust collection. Absolutely worth it.

@MikeFarrington

Жыл бұрын

Great tip.

Everything you've done is perfect and to the book! But... If you have any heating using natural gas/propane heating devices or, Burning wood heat woodstove.... Even air-conditioning cooling, exhausting chip and airflow to the outside is bad! I'm glad you thought about this. The other thing about this is if you air condition or keep cooler climate inside during the summer months.... Humid air being sucked in promotes rust to cast iron. I am religiously wax my surfaces cast-iron surfaces, and within 20 minutes of the garage door open I can see small amounts of surface rust on machines. I do run a dehumidifier and air conditioning.

@MikeFarrington

3 жыл бұрын

Thank you. I mention in the video about being able to select between venting inside and outside for all of the reasons you mention. We don't have humidity at 6k feet so rust isn't an issue thankfully.

Look at this guy, putting actual-facts ductwork in his shop like a real HVAC technician instead of slip-flitting a bunch of PVC together like the rest of us plebs. You proud of yourself? Feelin' a bit hoity toity on that high horse of yours? You should, you did a great job. Thanks for showing everyone how it should be done and giving me a bit of nostalgia, reminding me how much I hate working with ductwork.

@MikeFarrington

4 жыл бұрын

Ha! Thank you very much. Honestly, after having done both, PVC is a really good choice for dust pipe.

I'm new to your site and I'm glad I found the dust collection video. You explain a lot of things that others felt me in the dark about. I'm in the process of building half of my 4 car garage into a wood shop and the const. part is easy for me (45 yrs. in the trades) but never delt with the H.V.A.C. trade at all. Thanks for clearing up a few things for me.

@MikeFarrington

3 жыл бұрын

Thank you.

The extraction system looks great and I’m sure it will be more user friendly. Loved seeing the apprentice honing his screwing technique, and , seeing your beautiful daughter- both have grown so quickly. 😃👌👏👏👏❤️

@MikeFarrington

4 жыл бұрын

Thank you. Yup, they are both getting big.

I got tired of walking over to my collector to turn it on, so I purchased a until that you plug your system into which is turned on/off with a remote control that hangs on my waist. *Its one of the best things I ever bought.*

@rainerl-h259

4 жыл бұрын

I just wante to suggest the same!

@MikeFarrington

4 жыл бұрын

I left out a bunch of features this particular collector has, one of which is a remote. I wouldn't be without one. I pretty much consider that necessary.

@DanKoning777

4 жыл бұрын

@@MikeFarrington// Odd that I've gained a few pounds since buying mine. I keep telling the wife [and myself] it surely can't be b/c of this; so its staying...right!? Then I said [to myself], its just a "couple" pounds; whats next, the shop AC has to go too; [can you tell I'm "Covid bored" in MI]? I'm not making bricks w/o straw! *:)* Stay healthy everyone. God Bless.

Loved the shop apritcess’ wave. Made me smile.

@MikeFarrington

4 жыл бұрын

Thank you very much. I liked that one as well.

@anilsarapalli9968

4 жыл бұрын

Almost a princess’ wave

Just moved to CO, and installing the plumbing for my dust collector today. Great timing and great tips, thanks.

@MikeFarrington

4 жыл бұрын

Thank you. Good luck with your install.

Nice work, Mike. I enjoy watching your attention to detail and the neatness of your work. Take care good sir!

@MikeFarrington

4 жыл бұрын

Thank you.

I love your work Mike! Keep it up! I have learned so much here and it has improved my business!

@MikeFarrington

4 жыл бұрын

Thank you, thats great to hear.

As your woodworking videos & project builds are my favorite form you, every video you put out, I enjoy!! This dust collection system will take "The Board Room" to the next level!! Hoping all is well, Dirty Jersey out!!

@MikeFarrington

4 жыл бұрын

Thank you sir!

Great info and looks great, too. Awesome to see the shop apprentice refining his skills!

@MikeFarrington

4 жыл бұрын

Thank you. He is really into screwdrivers these days.

awwww.... She's precious! Congrats! Looks like a great system.

@MikeFarrington

4 жыл бұрын

Thank you.

I love the play on words for future shop assistant #2!

@MikeFarrington

4 жыл бұрын

Ha! Thank you.

The light in your shop is so nice!

@MikeFarrington

4 жыл бұрын

Thank you.

Very nice! I just wrapped up the dust collection in my shop

@MikeFarrington

4 жыл бұрын

Dust collection is not all that fun, but the end results are worth it.

The shop apprentice is getting big!

@MikeFarrington

4 жыл бұрын

He sure is.

The shop apprentice is getting big and good with a screw driver. They grow up fast though! I always like your videos.

@MikeFarrington

4 жыл бұрын

Thank you. They sure do.

Can’t wait to get some good dust collection - thanks for the help!

@MikeFarrington

4 жыл бұрын

Thank you.

Nice system and execution Mike. I'm currently putting in a system of my own, and every time I figure out the connection of two dissimilar products, such as a shopvac hose to PVC or what have you, I feel like a genius that just put a man on the moon :-)

@MikeFarrington

4 жыл бұрын

Often times there isn't a commercial available solution, so a shop made one must be constructed. Thats always fun to solve those problems.

Love your videos and all your helpers!

@MikeFarrington

4 жыл бұрын

Thank you.

I absolutely love your videos. This is so cool. Love all the thought put into it!

@MikeFarrington

4 жыл бұрын

Thank you very much Mike.

I have a small time two stage collection system and I use the green sewer pipe. I have a small shop. I liked the tip for adding screws and running wire and grounding it to the dust collector in order to mitigate the static electricity so the dust doesn’t stick as much too the outside of the pipe. I had never heard that before. I always was told to do it (although I haven’t yet) to mitigate an explosion 💥. Thanks for the tip.

@MikeFarrington

4 жыл бұрын

I think that the explosion thing has really only happened in a lab. I haven't heard of a real life case due to PVC pipe.

Mike, congratulations on so many levels here. I could go on and on with compliments, but doing so, I'd make us both feel awkward. Glad to see you are back down on the ground and safe. We'd miss you.

@MikeFarrington

4 жыл бұрын

Thank you very much. Lets not feel awkward...

I really enjoy your videos. The kids are such an added bonus! I loved the parade wave.

@MikeFarrington

4 жыл бұрын

Thank you. Her little wave is pretty darn cute.

That shot at the end that shows all of the pipes you ran really makes it clear just how massive and cumbersome a project like that must have been. Great job with it. But I hope that new system didn’t put the Apprentice out of his sweeping job.

@MikeFarrington

4 жыл бұрын

Thank you. There will always be a sweeping job for the little guy.

Great video my friend, glad to see you keep the little one close, remember family is everything, have a good one.

@MikeFarrington

4 жыл бұрын

Thank you. I agree, family is number one.

I’m going to copy your vertical boxes. Will be a perfect solution for my situation similar to yours. Thanks 😊

@MikeFarrington

4 жыл бұрын

Those have been a really nice addition. Plus they are reasonably easy to move if needed. A few screws top and bottom is all.

Nice job...great shop improvement!

@MikeFarrington

4 жыл бұрын

Thank you.

My little dude is the same age, it's crazy how fast they grow up & learn new skills! I got to build him a proper mini bench sometime soon. Oh, & the dust collection is cool too!

@MikeFarrington

4 жыл бұрын

Yes, they get big quick. Funny how time just disappears. Thank you.

Thanks Mike !! Great dust collection system, video, and kids !!

@MikeFarrington

4 жыл бұрын

Thank you very much.

Excellent work as usual! I'll keep your tips in mind for my shop once its built. I will say it was quite funny when a Dr Squach hair care ad popped up on a Mike Farrington video. 😆😀😆

@MikeFarrington

4 жыл бұрын

Ha! Thats funny.

You do better duct work than most HVAC installers.

@MikeFarrington

4 жыл бұрын

Ha! I hope thats not true.

I think the "Shop Apprentice" is becoming a pro at putting screws into wood. He'll be asking for a salary soon! I'm envious of your shop, dust collection system and all the machinery you have! Thanks for another informative video!

@MikeFarrington

4 жыл бұрын

Thank you very much.

Very nice Mike. That cyclone has so much suction, if it could cook you might marry it. Eager to see your CNC in operation.

@MikeFarrington

4 жыл бұрын

Ha!

Heavens to Mergatroyd!!!! The man can do it all.

@MikeFarrington

2 жыл бұрын

Thank you.

Now we need to see it in action.

@MikeFarrington

4 жыл бұрын

My next video will have it in action.

That's a great system, Mike. Another advantage to the rivets is they aren't as intrusive into the air stream as the screws are. Jay Bates just did a video on a CNC dust shoe like you mentioned. You and your family stay safe and healthy. Bill

@MikeFarrington

4 жыл бұрын

I agree with your assessment of the rivets being less intrusive. I looked at jay's dust shoe. I'm pretty much going to do the same.

MORE VIDEO! love your work.

@MikeFarrington

4 жыл бұрын

Thank you. I'm working on it.

Great video Mike!

@MikeFarrington

4 жыл бұрын

Thank you.

Big fan here from the philippines! 👍🇵🇭

@MikeFarrington

4 жыл бұрын

Thank you.

Very helpful. Great job. Thanks

@MikeFarrington

2 жыл бұрын

Thank you.

Love your humor!

@MikeFarrington

4 жыл бұрын

Thank you.

Great job, Mike!

@MikeFarrington

4 жыл бұрын

Thanks James.

LSL was used in your trusses! Cool stuff, super strong and straight. Great to build trusses with!

@MikeFarrington

4 жыл бұрын

Perfect application for trusses. Strong, cheap, long as you want, etc. Good stuff.

Nice work Mike. I have the same Cyclone but the 3 hp. I did notice once I ran a straight 8" pipe for 8' out of the intake, the airflow really increased. Also venting outside, incredible suction, only dust to really go outside is from the drum sander. I purchased my system off CL as well, $1700.00 and the spiral pipe that the previous owner had for his 3 car shop, was close to 3k in just pipe and fittings. I decided to go with aluminum tape instead of duct seal, as my small 2 car shop is always changing. Woud love to have your woodshop mansion space...

@MikeFarrington

4 жыл бұрын

Sounds like a good deal. Well done. So far I am happy with this one.

I hope my toddler would be able to spend time with me in the shop soon! I want her to grow up to like woodworking!

@MikeFarrington

4 жыл бұрын

Its fun having them around.

Hi Mike. Immaculate as always. Mine dust collector connected with cheap 433mhz rf remote. I found cheap round single buttons on eBay which i double taped to each machine. Now turnin on and off is so simple. Recommend.

@MikeFarrington

4 жыл бұрын

Great idea.

As expected again a perfect job!

@MikeFarrington

4 жыл бұрын

Thank you very much.

Be happy - Nice job Mike

@MikeFarrington

4 жыл бұрын

Thank you.

Great video! Thanks for the tips.

@MikeFarrington

4 жыл бұрын

Thank you.

Great work and excellent entertainment, like always. Best wishes to you and your family, and stay safe in this covid world we live in.

@MikeFarrington

4 жыл бұрын

Thank you very much.

Used to do this kind of work. You did a good job.

@MikeFarrington

4 жыл бұрын

Thank you.

Nice clean set up man, always happy to see you've posted up something new. I've not long moved workshop, and am currently trying to reuse the spiral ducting I took down from the last shop (and the one before). I must say I am pretty jealous of all those nice straight long lengths (ooo err!). It has been like someone pouring 5 jigsaw puzzles into the same box then expecting you to make one homogenous picture with all the pieces 🤦‍♂️

@MikeFarrington

4 жыл бұрын

Thank you. Dust collection is always a challenge.

Nice set up Mike. It sure is nice to have the high ceilings. Mine are only about 8'-6" and a 4x8 sheet of plywood bangs the duct work easily. Thank you for sharing and have a nice day.

@MikeFarrington

4 жыл бұрын

Thank you very much. The high ceilings are nice for sure.

Big thanks for clarifying your facial expression, I started to worry there for a moment. Always enjoy seeing your posts!

@MikeFarrington

4 жыл бұрын

Ha! I felt that shot needed a little clarification.

Great addition to your shop! I really need to upgrade the 1 1/2 horse to something much larger!

@MikeFarrington

4 жыл бұрын

Thank you, it has been nice.

Great video, very informative.

@MikeFarrington

4 жыл бұрын

Thank you.

Great video, makes me want to redo my system.

@MikeFarrington

4 жыл бұрын

Thank you.

@0:18 what a cutie!!! Cute as a bug is right. EDIT: Because I live in NYC, I'll never have the luxury of space. Unless I get Bezos rich and buy up four or five condo's surrounding my penthouse! :) But I get to live vicariously through your videos. Well thought out, well put together, well voiced-over. People who haven't edited/uploaded videos can't appreciate how long it takes to cut and put the it together. Well done as always.

@MikeFarrington

4 жыл бұрын

Thank you.

Good info video~! I'm in the process of planning out my own and this helps. I've opted for 4" (thin-walled) PVC to go with my Harbor Freight DC that I'm converting to 2-stage. Wish me luck~!

@MikeFarrington

4 жыл бұрын

Good luck.

Buenísima instalación, saludos desde España 🇪🇸

@MikeFarrington

4 жыл бұрын

Thank you very much.

Add micro switches to blast gates equals perfect system! great design!

@MikeFarrington

4 жыл бұрын

That is a really good idea.

Good job 👍

@MikeFarrington

4 жыл бұрын

Thanks.

in checking all the YT vids...I noticed one system had a port at the floor; just sweep the jetsom and flotsom by the port...woosh, pretty nifty!

@MikeFarrington

2 жыл бұрын

I kicked around that idea, but just decided to use my shopvac for that.

I so love the cadence of your videos. They are so very relaxing. The one thing I would suggest would be some way to activate the dust collector remotely. Thus, you could turn it on from a few key spots in the shop and turn it back of if you weren't going to be using it for a bit. It would help with the noise issue.

@MikeFarrington

4 жыл бұрын

I forgot to ad in the video that I have a remote control attached to my tool belt.

@meestahwah

4 жыл бұрын

@@MikeFarrington deluxe!! That's a fantastic solution.

Very nice work. Greetings from Playa del Carmen, Mexico 😎🌴☀️🇲🇽

@MikeFarrington

4 жыл бұрын

Thank you. I bet its warm down there. It was 13 degrees here yesterday morning.

@sergiomalcon

4 жыл бұрын

@Chairman of the Board ¡Muchas gracias! Thanks also for the Spanish writing, I really appreciate it. Whenever you want to come, you'll be very welcome... Mi casa es tu casa. 😎👍🏻

Great job! keep it up

@MikeFarrington

4 жыл бұрын

Thank you.

Great video Mike. I actually prefer the look of the pipe sealant to gobs of tape. I'm installing a system in my garage, and will most likely do my leaky elbows with this stuff.

@MikeFarrington

4 жыл бұрын

Me too. I really dislike tape. Plus this stuff is paintable, which I am considering doing to reduce reflection on camera.

Love your work Mike! I see the shop apprentice is getting bigger, soon he’ll be working on projects with you :-D. Ps The Goonies is my favourite film!! Awesome vid buddy

@MikeFarrington

4 жыл бұрын

Thank you. Goonies is a great movie for sure, one of my favorites.

Mike I see the oldest shop apprentice is getting very good driving in screws👌🏻 soon you can have him help you in the shop 😉😁

@MikeFarrington

4 жыл бұрын

Yup, he's getting close.

Congrats on number 2 :)

@MikeFarrington

4 жыл бұрын

Thank you.

A good and timely video. Dust collection is woefully inadequate in my shared shop. Would have loved for you to touch on the pipe size calculations. I still have not found a source that makes clear cut sense to me. But I suppose that might hurt the audience retention getting bogged down in that.

@MikeFarrington

4 жыл бұрын

I pretty much read the entire internet on how to calculate pipe size. I know more than I will ever need to know, yet I still really don't know how to really calculate one scenario to the other. I never really found a good system to lay everything out with mathematics. So in the end I just used my head and realized there would be compromises. Yeah, with regard to adding that kind of detail to the video, I have a hard enough time getting people to watch, let alone if I started droning on about math.

Thats nice pipe, I just used the cheap box store stuff! I did make note to watch which direction the male to female joints were in so the lip of the joint on the inside of the pipe was always with the flow of air. Nice shop, I miss mine so much.

@MikeFarrington

4 жыл бұрын

Thank you.

Speaking as an HVAC/R guy I have to say that that spiral pipe is kind of overkill for this application unless you want that ascetic. The only spiral I've ever installed was when it was meant to be left exposed in a finished space, again for mainly ascetic reasons. A standard round pipe is typically way cheaper, lighter, easier to cut (being that it's shipped "flat" and assembled on site). Also that sealant they sold you wouldn't be my first choice in this application either. I have seen it degrade over time. Aluminum tape would be far easier to deal with and once it's on there it's not going anywhere until you remove it. And one last tip, I was taught to pipe essentially in reverse so in this scenario I'd pipe from the tool back towards the collector....it's far easier to get your drop exactly where you want it this way.

@kevincasey2947

4 жыл бұрын

Would you ground the metal duct system? I realize this is somewhat of a controversial topic, I certainly don't mean to cause a stir, but I'm curious. I plan to build myself a metal duct system and I plan to ground mine, for what its worth. My thinking is mainly, when its done, its done. Thanks

@MaydaysCustomWoodworks

4 жыл бұрын

These are great tips. I'm going to try to remember these for if I ever have a large main dust collection system. I currently have many smaller dust collectors throughout the shop and it hasn't been an issue. But if I ever go back to a large one i'll want to remember this

@markf.4063

4 жыл бұрын

@@kevincasey2947 Metal to metal wouldn't really need a ground as you would have continuity throughout the run as long as it isn't interrupted by a non-metallic object (such as a plastic fitting/junction). You could almost just run a short ground from the start of the metal run to the equipment ground.

@MikeFarrington

4 жыл бұрын

I appreciate the comment, but I would have to disagree. I paid about the same for this pipe as I could have bought a similar gauge snaploc pipe from Lowes, which would have been special order. The gauge of the pipe was based off what the manufacturer suggests. Having done a little work with the the snap stuff, I really didn't think this was any harder or easier to work with. Using a chop saw to cut it was way easier than a pair of tin snips. The sealant was recommended to me by a friend I have who works as a dust collector installer, plus tape wouldn't be able to seal the inside corners of the wyes. Installing backward or forwards, either way, thats a matter of preference and would depend on the situation.

@markf.4063

4 жыл бұрын

@@MikeFarrington I fully understand what you are saying. I base my comment on my own professional experience working within the sheet metal/HVAC trade. I've serviced it, I've installed it and I've seen what works and what does not. Pricing may be a matter of geographical location but spiral duct is WAY more expensive in and around the Chicago area than standard round pipe.

Good job

@MikeFarrington

4 жыл бұрын

Thanks Lou.

Good video.

@MikeFarrington

4 жыл бұрын

Thank you.

greeting mikey for you and your family good job man

@MikeFarrington

2 жыл бұрын

Thanks 👍

Wowwwww. Thank you!

@MikeFarrington

4 жыл бұрын

My pleasure.

Nice work! I like how you planned out your blast gate location. I just finished up my DC piping this weekend. I think I spent about twice as much time planning the blast gate locations as I did actually installing the piping. I got pretty OCD about making sure all gates were about an arms reach away from the tool's power switch. Effort well spent in my opinion.

@MikeFarrington

3 жыл бұрын

Unless the blast gates are automatic, their location is very important. I agree effort well spent.

Looks good. Well done. Y´s, ellbows and horizontal Lines are the way to do. Blastgates too far away can be operatet with wooden sticks and an eye-bolt. Even on the very top lines. Internal is always better. Wintertime the cold and summertime the moist. All Air that is blown out must come in somewhere. And that is a lot with that sucker.

@MikeFarrington

4 жыл бұрын

I really like the stick and eye bolt idea. I may use that in a few places.

Was severely let down by the fact that there was no song recommendation. I'll stay subscribed, though, don't worry! Haha

@doubledarefan

4 жыл бұрын

He did mention The Goonies. So there's a movie recommendation right there!

@GregoryFeeney

4 жыл бұрын

Also he demonstrated teaching the new apprentice about the importance of pilot holes for screws.

@b1j

4 жыл бұрын

You missed the song by The Killers: “all that you make”. Mentioned near the end.

floored by the prices $$$...just found one on CL for $200!...Great tip!!!

@MikeFarrington

2 жыл бұрын

Right on

I, for one, appreciate the Simpsons reference of "smiling politely."

@MikeFarrington

4 жыл бұрын

Ha! Great show.

Nice and thank you

@MikeFarrington

4 жыл бұрын

Thank you very much.

I would like to recommend adding a floor sweep as well.

@MikeFarrington

4 жыл бұрын

Thank you. That is a good idea.

If I were the type I'd be envious. Thanks for giving me something to aspire to! The shop apprenticii (how's that for butchered Latin?) warm the cockles of my heart. Keep on keepin' on!

@MikeFarrington

4 жыл бұрын

Thank you.

Love your work mate. I like that you have two table saws, one with a sliding arm. I’m from Denmark and all the table saws we have here are with sliding arms, in fact it’s hard to find one without it. I was lucky enough to spend some time working in a shop in Connecticut. It was great fun and very educational! By the way there’s nothing called danish oil in Denmark 😂

@MikeFarrington

4 жыл бұрын

Ha! You guys just call it oil. Thank you. I enjoy using both saws.

@talltimberswoodshop7552

2 жыл бұрын

Watch HomeMade in Lviv. He uses American Oil. There's nothing called American Oil in America either.

If only there was a way to make fabric ductwork for vacuum lines!

@MikeFarrington

2 жыл бұрын

That would be cool.

We have to do a similar thing for my dad's shop.

@MikeFarrington

4 жыл бұрын

Its a nice upgrade.

The video was great, but the like was the apprentices :)

@MikeFarrington

4 жыл бұрын

Thank you. They're my favorite part as well.

Where was this new school method a year ago when i put in my dust collection. Ran into the same pain when trying to get measurements in the air :) I feel your pain trying to hang the pipe solo.

@MikeFarrington

4 жыл бұрын

Ha! Sorry, I should have done this a long time ago.

as ever mike awesome love the shop apprentice and involving kids in building is awesome you perhaps make some door frames and door kid sized for them to build as parts kits don't under estimate what they can do .... i was suprised what mine did when i tried this out on mine at a early age............be safe and keep the vids a coming......

@MikeFarrington

4 жыл бұрын

Thank you. That is a good idea.

Always love your dry wit Mike. If I understand correctly, the static in dust collection is more than a nuisance; it can result in explosions. Arguably a more compelling reason to mitigate static electricity in your ducts. Before I get torn apart in the comments, I know there is debate around this topic. The debate is not whether sawdust can explode; this is easily demonstrable. Rather, the question is whether static discharge is sufficient to trigger the explosion. Given the high variability in shop conditions, such as humidity, wood type, saw dust particle size, and so on, It would be tough to test the hypothesis accounting for every variable. I'd prefer to spend a bit of time and a small amount of money grounding the system than run the risk, however minute, that I could become one with my shop tools. All that said, I'm no expert. Do your own research and decide which side of the risk equation you want to land on. Happy woodworking!

@jandrewmore

4 жыл бұрын

This is a myth, and there are not recorded incidents of dust collectors at this level having an explosion. The mixture of air and dust isn't right, and there's seldom a source of ignition. The largest possible source of problems is sucking up a screw, having it hit the impeller and drop a spark into the dust in the barrel, but even that is very rare.

@MikeFarrington

4 жыл бұрын

I would also add that the concentration dust needs to be at in order to be explosive is very very high. Meaning you could be running your table saw full blast and hold a lighter in the collection pipe and it would explode as there just wouldn't be enough ignitable material. But yes, there is a risk of explosion, thats the reason dust stoves are not readily available in the US.

OK. What i got from this vid is you getting a CNC.. What i tend to forget is to close the slides on machines i've used.. I've seen a pneumatic solution for that. It uses an air ciliinder that activates that valve once the machine is running. I like that a lot..

@MikeFarrington

4 жыл бұрын

Yup, I am a CNC guy now. I have been working hard at learning how to use it. I am also looking into a couple automatic blast gates for some of the hard to reach ones.

@berendlucasvanderweide

4 жыл бұрын

@@MikeFarrington What software are you using for the CNC?