Let me know if you liked the dolly zoom shot at the end? First time doing one. It took several tries but I thought it turned out pretty cool. :)

@outterlimitsprod

5 жыл бұрын

Slow and Expensive it looked dope! Keep it up, great idea btw...it got my wheels turning, I’ll be adding this to my shop

@SlowandExpensive

5 жыл бұрын

Thanks man! Much appreciated

@daversj

5 жыл бұрын

Are you backing up the camera while zooming in at end? Background came into focus...cool

@SlowandExpensive

5 жыл бұрын

I'm rolling the camera forward while turning the zoom back. It's was difficult to get both the rolling and then zoom twist smooth at the same time along with the auto focus staying locked on but a couple of the "many" attempts turned out pretty good. Thanks

@MakeThings

5 жыл бұрын

Slow and Expensive that was really cool! I was going to message you asking how you pulled that off. Awesome!!

Another option for pvc is a heat gun. Heat up the pvc until it is soft, then you can push it into the shop vac fitting. Once it cools, you can pull it back out and it will stay conformed to the shop vac fitting.

@stanleykachuik2589

11 ай бұрын

I had a bunch of great quality attachments from a dead Dyson vacuum that I did the heat gun trick. Just needed to pick up the Ridgid orange hose to make it work.

I like you style! You made me smile at the end, when your were saying “make it rain! I’m following you because I like your style and killer positive attitude and I look forward to seeing you more 👍

@SlowandExpensive

4 жыл бұрын

Thanks Mark! I appreciate the support :)

Great out of the box thinking. With 3D printers everywhere any size adapter can be knocked out pretty quick. I recently made a 4" adapter to fit PVC, 3D printed.

@SlowandExpensive

Ай бұрын

Thanks!

Great idea mate!! Always "Vork 'Schmarter', nodt Harder", Yah. It is my belief that a LOT of engineers get paid OVERTIME, just to make sure that Plumbing Stuff does NODT interchange! Gb

@SlowandExpensive

5 ай бұрын

Thank you!

What a great way to solve our perennial problem of pipes never quite matching with dust collection. Your method is SAFE, accurate and repeatable. Great problem solving.

@SlowandExpensive

4 жыл бұрын

Thank you Philip! I appreciate the comment :)

@Ritalie

Жыл бұрын

Also it might help to tilt the blade slightly, because vacuum hose fittings have a taper, so having at least some taper might be helpful? I'm interested to see how this could be done on a radial arm saw haha.

Absolute genius!! I’m redoing some of my sawdust collection and this is perfect for my needs. I really appreciate such a down to earth way of making these adaptors. Heading to the shop soon to make your jig. Many thanks

@SlowandExpensive

3 жыл бұрын

Thanks Phil! Running the jig with the blade tilted 1 degree adds a nice taper that makes an even better fit.

My first thought when I saw that jig was “what in the Izzy Swann” is this?! Haha nice job!! Great solution!!

@SlowandExpensive

Жыл бұрын

Thank you!

That's a pretty incredible little jig you made an awesome idea. Thank you for your thoughts and your video. Well-documented and instructed how to do

@SlowandExpensive

4 жыл бұрын

Thanks Jeff!

Wow! This was great! KZread popped you into my suggested feed and by gosh.. they DO know what I like! Greatly enjoy your presentation, editing, and of course the project. SUBBED!!!

@SlowandExpensive

4 жыл бұрын

Thanks Green Acre! I really appreciate it :)

Probably one of the best tips I’ve seen in quite a while. Awesome job!

@SlowandExpensive

4 жыл бұрын

Thanks John! Best comment ever award! :)

This was a great video when I first saw it, some years ago. It's still a great video because I can't find my adaptor for my Ridgid 12" sliding compound miter saw. So glad I found it again!!

I’m in the process of building my shop dust collection system myself. This will surely come in handy. Thanks so much! Great spirit!

@SlowandExpensive

4 жыл бұрын

Thanks for watching! More on the way :)

Very precise and safe way to mill your own reducers out of PVC, Thanks for Sharing 👍🏿👍🏿👍🏿

@SlowandExpensive

4 жыл бұрын

Thanks John!

Super job Tony. Excellent 'how to' and really entertaining vid. I liked the round-the-table shot at two minutes forty-ish but I don't think I'd have noticed the dolly zoom if you hadn't mentioned it. Oh well, that shows what a philistine I am. Good job mate, thanks for all the effort you put into your vids.

@SlowandExpensive

5 жыл бұрын

Thank you very much Mark! I really appreciate it.

@robertleftwich1122

4 жыл бұрын

I do this kind of pipe reduction all time. I just us my wire wheel that’s on the other end of my 6” grinder. It is very fast, but not as perfect as using a table saw as a lathe type result.

@SlowandExpensive

4 жыл бұрын

That sounds like another way to do it! :)

It never ceases to amaze me seeing the imagination some of you guys have, very impressive.

@SlowandExpensive

4 жыл бұрын

Thank you!

Now that is an outside the box way of turning a cylinder without a lathe, thanks for innovating!

@SlowandExpensive

4 жыл бұрын

Thank you!

I've been wanting to make a stacked dust separator using a shop vac so I'll give these a try. Thanks. On a side note I've used the drill method for cleaning the end of copper pipe before soldering by running a bolt through the cleaner. First time I did it I burned the hell out of my thumb, forgot about friction. Lol, lesson learned...

@SlowandExpensive

4 жыл бұрын

Thanks Bob! :)

@johnvodopija1743

4 жыл бұрын

Bob O'Connor I’ve just made one of the best stacked dust collector builds I’ve seen and is works a treat 👍😎🇦🇺 kzread.info/dash/bejne/an5tmpiugrSshKw.html

@jasondoust4935

4 жыл бұрын

Experience is a great teacher, but we've all been reminded that her tuition fees can be expensive. :-)

Shop Vac fittings are tapered to give a seal when they are seated. Tilt the blade 1* and do everything else the same. They won't pull out or vibrate out when in use and the little twist at the end makes it secure.Good video and Good Luck!

@SlowandExpensive

4 жыл бұрын

Thanks Randell! You can taper the fittings slightly when you sand them too, although I'm getting a pretty tight fit without any tapering.

@ScreamingEagleFTW

2 жыл бұрын

@@SlowandExpensive can it be air tight if its not water tight? it would be cool to test it. i guess it doesnt matter too much.

Great idea! Clever solution. The shot at the end was cool(of the couplers stacked on the bench)

@SlowandExpensive

5 жыл бұрын

Dave! Thanks man! That was the dolly zoom. It took me several tries but I finally got it. A little tricky to manually get both actions smooth at the same time but a couple of the takes turned out nice.

Well done. Smiling all the way! Good close-up.

@SlowandExpensive

4 жыл бұрын

Thanks for watching!

Definitely agree with the use of PVC fittings as alternative to the over priced vacuum fitting. I have to say though that this is the most intricate alternative to a lathe I've ever seen. The PVC turns/machines very nicely with basic tools.

@SlowandExpensive

4 жыл бұрын

A breakthrough in low technology :)

Great idea!! I have a lathe and have had to make custom adapters and did some for under the house. Cool camera work. Sah-weet video!! Thanks for sharing.

@SlowandExpensive

5 жыл бұрын

Thanks David! Much appreciated :)

Mate please except induction into the woodworkers hall of fame and go straight to legendary status. That was brilliant and is going to solve many shop dust problems.

@SlowandExpensive

2 жыл бұрын

Thank you!

Tony, this is a bright exmple of thinking outside the box. I'm totally impressed by the drill rotation improvement

@SlowandExpensive

5 жыл бұрын

Hey Alberto! Thank you

@alfredomarquez9777

4 жыл бұрын

And not only this, but many other things can be easily done with a drill, thanks to its ability to turn slowly. I often use my hand drill to spin a small part while using a Dremel or a sander to perform some cut or sanding. The drill keeps the part centered and turns it to achieve an uniform material removal!

Such a Great idea on making the fittings. A slight degree of tilt in the table saw blade and you can make tapered fitting connections for a snug fit with some range. Now I’m thinking this could be useful for tapering round wooden legs to be but into holes for chair leg joinery.

@SlowandExpensive

4 жыл бұрын

Interesting thought! I've not tried any tilted cuts.

Very clever and worth it if you are running a lot of shop vacs as you do. One suggestion: sharp 90 degree bends cut airflow by some amount. I would try a longer radius 90 degree sweep elbow and see what effect it has.

@SlowandExpensive

4 жыл бұрын

Thanks Jim! The sweep is always a great option. I usually choose the small form factor of the street 90's to try to keep things tight and close to the vac. It would be neat to do an airflow test somehow :)

What a great idea with that jig. Fantastic!

What else... kickass!, I love this tool. As soon as I get around to it, I’m getting back into finishing my workshop. Thanks my friend.

@SlowandExpensive

4 жыл бұрын

Thanks for watching!

This is a great tip video! While watching this video I was already seeing a "better way" by cutting them to 5" and doing both ends and then cutting them in half to length. This way I'd have more to grip (above the fence) while turning. But then... you whipped out the cordless drill idea and BOOM! Mind blown! Clearly, I didn't know who I was dealing with - lol. What a game changer. Genius idea brother!

@SlowandExpensive

4 жыл бұрын

Thanks Tee Jay!

That is a great jig, Tony. Thank you.

@SlowandExpensive

5 жыл бұрын

Hey Chippy! Thank you. I hoped this idea would be a helpful one.

Loved your creativity and practical solutions. Great idea seeing your version of dust collection for individual tools in the back ground. 👍👍👍

@SlowandExpensive

3 жыл бұрын

Thank you! I appreciate it.

Great idea, well presented, thank you. My suggestion to make it a little easier to do by hand is to machine the recess in the end of a longer tube then cut it off to required length.

@SlowandExpensive

4 жыл бұрын

Thank you! Good idea

For that final touch, spray some slightly diluted acetone on the rough cut. It will soften the PVC a bit and as it dries out it should leave a very smooth finish. (or if you have it, you can use PVC primer and let it dry)

I love how I’m geeking out over you geeking over dust

@SlowandExpensive

4 жыл бұрын

Thanks for watching :)

How simple is that! Brilliant! Thanks for showing this technique.

@SlowandExpensive

3 ай бұрын

Thank you!

This is called "Imagineering." Too bad the dust collection industry cant standardize dimensions. I have used my lathe, though your solution has some advantages over the lathe. I will build a jig like yours, however, I will drill the hole with a Forstner bit. Think outside the box. Great Idea!

@SlowandExpensive

4 жыл бұрын

Thanks Tom!

@nightstringers

3 жыл бұрын

Imagineering love that word

@LarryDMitchell

3 жыл бұрын

I just stumbled across your video and immediately thought of using my lathe as well. Good idea. Just subscribed and going to check out your other videos.

@rjwinn1088

2 жыл бұрын

Seems as though using a very small angle to the blade, 3-4°, may help the friction fit seal, if done correctly. Extra taper may help account for variance in different manufacturers and stretching or contraction from wear or temperature. To much may result in lack of sealing surface though... Will be trying in the coming weeks myself. Will report back if I recall too.

Some one who knows how to edit themselves and great pictures.

@SlowandExpensive

4 жыл бұрын

Thank you!

Sir , you make the best videos ever . You talk at a great pace and show your work with detailed video and pictures .

@SlowandExpensive

4 жыл бұрын

Thank you so much!

make no mistake, I am deeply grateful to you putting up this really neat project. I'm tinkering around with this while sinking deeper into a sea of honey do's. tinkering according to my wife according to my wife.

@SlowandExpensive

4 жыл бұрын

Thanks! Tinkering for better dust collection = cleaner air and better health :)

@thomasgibbons353

4 жыл бұрын

@@SlowandExpensive Thanks man, I'm with you.

Great video. You could also do it on a router table with just the fence and a stop block. Use longer pieces then trim to length. You would get better precision.

@SlowandExpensive

3 жыл бұрын

Thanks Steve! The router table will work too. Some of my commenters recommended tilting the blade on the table saw to create a slight taper and I have found 1 degree to be the sweet spot for the perfect fit if you do make this jig. This makes for a perfect fit every time with some tolerances. Something to consider when working out the router table version. Be sure to check out the next video in the series and if you just need a few adapters you can always get them from me. B3G1F Links in the description :)

When you said "Look at that", it was a Bob Ross moment.

@SlowandExpensive

4 жыл бұрын

Thanks for watching!

I love your enthusiasm and camera work

@SlowandExpensive

4 жыл бұрын

Thank you!

Very cool idea, neat way to make diy dust collection at home

All that work just heat up and shrink just bottom half bam,done!!

@SlowandExpensive

4 жыл бұрын

Table saw vs. heat gun challenge video! :)

@johnkeyman1

4 жыл бұрын

exactly what i thought... damm this guy knows how to make more work for himself

@walthodgson5780

4 жыл бұрын

Would that not also reduce the inner diameter of the pipe, constricting flow?

@theloniousm4337

4 жыл бұрын

@@walthodgson5780 It would restrict flow a bit but this is a shop vac not the air supply on the space shuttle.

Great tip and jig. Just trying to figure out why so many shop vacs for dust collection. With what you have invested in shop vacs you could have bought a shop fox dust collector and plumed it with pvc

@SlowandExpensive

4 жыл бұрын

Thanks Butch! It looks like a bigger investment that it really is.

@oldschooldiy3240

4 жыл бұрын

If you mean the system I think you do, that's several thousand dollars! You can buy 5 gallon shop vacs $49.95 all day long!

First and foremost, thank you for demonstrating your crafting with affordable tools. VERY useful idea and subscribed.

@SlowandExpensive

4 жыл бұрын

Thanks Michael!

I clicked on your video because your title told me what your video was about and you got right to the chase. I'm so sick of these videos "OMG you won't understand this until you see it." Usually they are bad videos with really no substance. Good on you sir, good video.

@SlowandExpensive

6 ай бұрын

Thanks

Awesome idea and execution. Too bad shop vac manufacturers don't make their fittings according to PVC pipe standards.

@SlowandExpensive

4 жыл бұрын

Thanks Guy! I appreciate it

@alfredomarquez9777

4 жыл бұрын

Don't only that; they make EVERY POSSIBLE EFFORT to make their vacuum UN-Compatible with every other Brand too. I've a DeWalt that I cannot connect easily even with some of their own tools!

Using a2 ft piece long is easier just cut to length after turning each piece unless you use the drill method

@robertpatton9856

4 жыл бұрын

Randy Wells brilliant suggestion rw

Just came across your adapter from 2" PVC...AWESOME. Just what I've needed as commercially made adapters aren't cheap.Well done and thanks!!!!

@SlowandExpensive

3 жыл бұрын

Awesome, thank you!

That's a beautiful and clever jig.

@SlowandExpensive

3 жыл бұрын

Thank you!

So, are you going to sell these? Lol I would buy half a dozen!

@SlowandExpensive

4 жыл бұрын

Didn't plan on it but maybe! :)

@hagengocht3891

4 жыл бұрын

Kudos by the way. My dad had a cabinet shop so I grew up in it. I thought I had seen every jig known to man and have built many myself as well. Never would have come up with your solution even if my life depended on it. Lol You are one savvy guy or you have no life and live in the shop!🙏🙏🙏

@SlowandExpensive

4 жыл бұрын

Thanks!

@SlowandExpensive

4 жыл бұрын

Hey Hagen! They are available if you still need some. Thanks :)

If you have that much invested in tools then you probably have a lathe. No jig to build. No trying to get a round hole with a jig saw.

@akbychoice

4 жыл бұрын

Tom Zorba true but I think this was to show it can be done by people that don’t have a lathe.

@gregmislick1117

4 жыл бұрын

...I don't have a lathe. ...I DO have a lot if dust.

Very clever, I like your shop ingenuity and kind enough to share. Great job!

@SlowandExpensive

4 жыл бұрын

Thank you! There will be more

A very clever way of using a table saw as a lathe. Well Done!

@SlowandExpensive

4 жыл бұрын

Thank you!

Hate to rain in your parade, there is a fitting called a pipe extender, will save you from having to manufacture the fitting. They cost about $3.00

@SlowandExpensive

Жыл бұрын

Sounds too good to be true!

@Weshopwizard

4 ай бұрын

The name of the channel is slow and expensive.

@tonmage29

4 ай бұрын

Yeah but the sizes are less than 2 inch. And besides this idea can be adopted for different project. So don't be a cloud on a sunny day.

@tomallen7699

4 ай бұрын

@@tonmage29 I have seen the pipe extenders up to 4", used many times. Don't know if plumbing supply houses stock them- know pool supply companies do though..

@Lwimmermastermetalart

2 ай бұрын

Just makes me so happy I have a lathe to do stuff like this lol

Hey Slow and Expensive, thanks for taking the time and effort to make this excellent video tutorial on making adapters from PVC pipe to fit the Rigid shop vacs.

@SlowandExpensive

3 жыл бұрын

Thank you!

Like we say down here, "BTSB", better than store bought. Good show.

@SlowandExpensive

3 жыл бұрын

Thanks!

Perpect. Excellent video and process. Thanks for sharing

@SlowandExpensive

2 жыл бұрын

Thank you!

Good morning again. As a quick follow up to my comments yesterday, I found that my hand held jig saw didn’t quite get the desired true hole I had hoped for. I don’t have a spindle sander but plan to pick up a 2 1/4 hole saw today then “ sneak” up on the perfect 2 3/8 hole I need. Though my first attempt wasn’t as neat, the outcome still yielded 4 usable adapters. Many thanks again

@SlowandExpensive

3 жыл бұрын

You are very welcome! Stayed tuned for the rest of the series. Part 2 has a few cool tips if you haven't seen it kzread.info/dash/bejne/dXmj16iAlr3gdco.html and more to come :)

You did not have to freely give of your time and experience to help us...for that, I thank you most sincerely.

@SlowandExpensive

3 жыл бұрын

Thank you! There will be more :)

Thanks for the great video and tips Tony.

@SlowandExpensive

4 жыл бұрын

Thanks for watching Mark! There's more on the channel and more on the way! :)

Love the tablesaw, have the same. Your setup is what I've been looking for.

@SlowandExpensive

4 жыл бұрын

Thanks Daryl! It's the dream boat of table saw arrangements for sure. Detailed video coming soon.

Some really great tips, will use them. Thanks Tony Port Townsend WA

@SlowandExpensive

2 жыл бұрын

Thank you!

Great video of an excellent idea. I particularly appreciate your attention to detail. The PVC cut was a beautiful thing to see.

@SlowandExpensive

4 жыл бұрын

Thank you!

Brilliant!! Very slick! Thanks for sharing.

So much fun when an idea works. Great tip, great problem solving, and great video skills.

@SlowandExpensive

5 жыл бұрын

Thank you tues boomer! Much appreciated :)

You are the Dust Sensei. I appreciate your quality videos and education!! Extremely helpful. I bought a Ridgid shop vac and so far very happy. thanks.

Brilliant! An innovative way to solve an annoying lack of product (or at least replace an unreasonably expensive product)!

@SlowandExpensive

3 жыл бұрын

Thank you!

Can we just take a minute to marvel at the damn circle he made with a jigsaw?

That's a great idea. Super easy and really cool, original thinking.

@SlowandExpensive

4 жыл бұрын

Thank you!

Love that jig and drill spinner.

@SlowandExpensive

Жыл бұрын

Thank you!

Very nice. Luv your idea to incorporate the cordless drill to speed up the process!!

@SlowandExpensive

4 жыл бұрын

Thank you!

Half way through the video I realized that I have a lathe and I don't need to build this jig, but never the less I'm impressed with the idea! :)

@SlowandExpensive

4 ай бұрын

Thanks!

Oh yeah!! Just what I needed….when I needed it!

@SlowandExpensive

2 ай бұрын

Perfect!

What a genius, genius at work. some peoplw have all the brains...thx man for the upload of your fantastic idea

@SlowandExpensive

6 ай бұрын

Thank you!

Thanks for the video, I'm currently setting up my shop and this is a huge help for dust collection.

@SlowandExpensive

4 жыл бұрын

Nice! Hope you enjoy the entire series. The second video is up too. kzread.info/dash/bejne/dXmj16iAlr3gdco.html Thanks for watching!

Well that was a fantastic creative video on how to make a 2" inch PVC pipe fit your shop vac! Now I have to scour KZread for DIY Shop Dust Collection Setups! I thought I had to go thru life hooking up my vacuum cleaner to each one of my shop equipment that throws up dust and debris. Thanks for enlightening me to the next level of dust free efficiency!

@SlowandExpensive

4 жыл бұрын

Thanks Tuck! This was the first in a series on shop vac dust collection. More ideas on the way including set ups on table saw, miter saw, drill press, dust collection cart and more. Thanks for watching! :)

Really cool adaption

@SlowandExpensive

4 жыл бұрын

Thank you!

Great idea. I have a bunch of stationary and hand power tools with different sized dust ports. I have a ryobi battery rolling vacuum. No one seemed to make all the adapters I needed so I finally figured out to use the rubber pipe adapters that have metal bands you tighten around each end. Was able to order all the different sized ones I needed off Amazon and weren't expensive. They work great!

@SlowandExpensive

4 жыл бұрын

Thanks!

Brilliant, idea, clear instructions, great video job! Thank you!

@SlowandExpensive

4 жыл бұрын

Thank you very much! :)

Ingenious! I like how you think! A very creative and easy solution to a problem we all face with any dust collection system. The tool manufacturers really need to get on the same page and make tool ports all the same. It's just another way they force us to either buy adapters like Rockler's tool adaption hose kit or go to the drawing board and create our own adapters. In this case, your solution which I just may have to try myself! I currently use a big garage wall type of vac for all my tools and it works great for my handheld power tools, but not so much for my larger tools. I have a large Rigid shop vac in my basement that is practically brand new that may get added to the system until I can get a 2 or 3 hp DC. My only dislike of using either is the noise they make. The spring project of 2021 is to build a DC "closet" off the back of the shop. Thank you for sharing this with us.

@SlowandExpensive

3 жыл бұрын

Thank you!

I just made one of those adapters. It was pretty easy using your instructions. With that adapter, 3 elbows and 2 ends as shown in your short hose video, I shortened the hose to my Dust Deputy cyclone by about 3 feet.

@SlowandExpensive

2 жыл бұрын

Very cool! Thank you. I'm always glad to hear the videos are helpful.

what a great method for trimming the outside of the pipe! this gives me an idea for using the same concept with a router table when the inside diameter of a pipe needs to be increased. great video. thanks for sharing!

@SlowandExpensive

4 жыл бұрын

Excellent! Thanks for watching! :)

Wow, awesome idea. I will use this , thank you sir.

Awesome idea! Thanks for the great tip(s)!

@SlowandExpensive

4 жыл бұрын

Thanks for watching!

I like this very much. Great idea and clever little jig👍

@SlowandExpensive

4 жыл бұрын

Thanks so much! I'm glad you enjoyed it. It was a fun share :)

Brilliant. Nice work man! Would love to see what other creative Jigs you've made!

@SlowandExpensive

4 жыл бұрын

Thanks man!

Dude....this stuff must keep you up at night! Regardless, and since I don't have a 3D printer, I'll be making my own adapters with this technique. Very creative and well done. Thx

@SlowandExpensive

4 ай бұрын

Thank you!

Awesome! Thank you for sharing. Very creative and functional.

@SlowandExpensive

4 жыл бұрын

Thank you!

LOVED it!! Your editing is beautiful man and what a cool little jig...with another really cool jig to go with it!!!

@SlowandExpensive

5 жыл бұрын

Thanks Rob! I appreciate it :)

That is a cool idea for a jig. I noticed that you have 5 or 6 Ridgid shop vacs, that I can see. Those start out at 80$ and go can double depending that depending on what vac you get. That's 500$ on the low end in shop vacs. You can buy a standalone dust system for that and not only save a lot of space but have a better system. I built a dust system with a shop vac (gift) and made it into a standup cart so I can move it around. It works great but couldn't imagine using that many vacs.

Lol, we all know it doesn’t matter what’s easiest,😁 looks likes a fun little project. Appreciate the idea. I’ve seen people just heat up the pipe and reshape them but like this idea better, kinda cool. Thanks.

Very nice job

What an awesome and inventive idea!

@SlowandExpensive

5 жыл бұрын

Grant Alexander! Thank you! :)

It took me way longer than it should have to understand what you were doing. Great idea, I think it will help me.

@SlowandExpensive

4 жыл бұрын

Cool! There will be a few more helpful tips in this series. Thanks for watching!

Your are correct. Definitely some OTB Thinking going on over there. I never would have thought of holding the piece vertically. definitely more stable than the way I do it. Now I gotta do one like that. great idea Tony.

@SlowandExpensive

5 жыл бұрын

Thanks Russ! I thought you'd appreciate this one. I'll be keeping an eye out for your copy cat version! :)

@russveinot5754

5 жыл бұрын

never give a guy a break :>) You won't get upset if I improve it? It's like the first lie … there's always one better :>)

@SlowandExpensive

5 жыл бұрын

Of coarse not. Improve away! :)

That is genius wow that's going save time for me now didn't think of doing that thanks for sharing 👍👍👍👍

@SlowandExpensive

4 жыл бұрын

Thanks Andrew!

Very clever thinking, I luv it !