Ok, I need all my English speaking subscribers to help me come up with a synonymous word for nipple, cause when I refer to "spoke nipples" "drain tube nipple" etc. KZread flags my videos as non advertiser friendly. More heads are better than one. Still funny though.....

@stevieg7403

6 жыл бұрын

Albe's Adv Hi, you could use “bleed valve”

@AlbesADV

6 жыл бұрын

+Stevie G haaaaaaa, so simple, thank you!!!!

@danmastellotto9862

6 жыл бұрын

You can use words like "Spoke Bolts" or "Spoke Nuts" same as "Drain Tube Bolt" or "Drain Tube Nut" etc

@AlbesADV

6 жыл бұрын

Thanks man

@rdstrain49

5 жыл бұрын

try making it one word. spokenipple or drain plugnipple. Who knows, might work.

Hi Albe. I just want to thank you for demonstrating all that you have done to the Scrambler. Ducati wanted to bend me over of an intermediate service and because of you I saved $750 australian dollars. May god bless you ! Thank you x1000 !

@AlbesADV

3 жыл бұрын

Hi KKW, I'm glad you were able to do it yourself 😀👍

Dude, having you show this makes just pushed me over the edge to buy the Cafe Racer, I’ll totally be able to maintain it. Bravo 👏

@AlbesADV

5 жыл бұрын

The cafe racer looks great too 👍 good choice

And after you disassemble 3/4 of your bike, you can finally change the air filter. Thanks Ducati. :)

@AlbesADV

2 жыл бұрын

Lol, yup

Good video. I’m going to do it on mine with your help. Thanks. I did it. Not the easiest thing to do, but its done now.

Thank you. It's very useful and detailed instruction of the air filter replacement.

@AlbesADV

6 жыл бұрын

I'm happy to be helpful.

Great review! Thanks a lot!

Very informative Bravo !!

Thank you from Bulgaria

@AlbesADV

10 ай бұрын

Thank you for watching 😀👍

Thank you ! Nice video.

Thanks Albe.

Brilliant presentation, thanks.

@AlbesADV

7 ай бұрын

Thank you 😀👍

Great videos! Subscribed. 🇮🇹👍🏼

@AlbesADV

5 жыл бұрын

Thanks man

10 screws for an airfilter lid, and a paper filter element is a strong indication that Ducati don't have a long history in dirt/gravel bikes.

@AlbesADV

6 жыл бұрын

+MarxOutThere no doubt.

I have the Icon and this vid is ggreat

Are you planning on making a video about the desmo service (valve clearance adjustment) procedure? Would be definitely appreciated by us ur suscribers. Thx and keep up the good work

@AlbesADV

3 жыл бұрын

Hi Roberto, I will do a Desmo service when and if I get to that mileage. I know a lot of my subs would benefit from it, so maybe I’ll do it before it’s due 😀👍

hi Albe's Adv, I like the exhaust on your Desert Sled. What model is'it ? thax for your signe, best regards Claudio ...by the way I like your videos, bravo!

@AlbesADV

27 күн бұрын

Hi Claudio, grazie, the exhaust is a Remus exhaust, very loud without baffle 👍

Excellent tutorial! for the monster 797 is the air filter in the same place or under the gas tank, like 821? thanks

@Brockstar10000

4 жыл бұрын

Same place.

Hello Albe, I have a 2019 Ducati Scrambler 1100 and I believe the access to the air filter is more complicated. The oil cooler is right in the front of the air filter box. There is a bolt at the bottom of the oil cooler that I believe will allow the oil cooler to pivot away from the air filter box. However, I'm wondering if the Oil cooler tubes will be in the way. My Scrambler access to filter is not like your video. Any suggestions? My owner's manual only suggests taking the Ducati to the dealership for servicing of the air filter. Seems like it should not be that complicated. Thank you, Sean Austin, Texas

@AlbesADV

4 жыл бұрын

Hi Sean, there has to be an easy-ish way of doing it, after all, the air filter is a consumable part. Unfortunately I don’t have an 1100 on hand to try myself or even a manual, so I don’t think I can be much help

Hi there, thanks for the vids, they are very useful. Was wondering about the pros and cons of switching to the KnN filter. Other than having a washable filter, are there any noticeable performance benefits? A little more power? Better power delivery? Or any issues? Less smooth power delivery? Should one do a remap? Is this filter more useful with aftermarket exhausts? Thanks.

@AlbesADV

6 жыл бұрын

+greggusan the pros are that the throttle feels more responsive, you gain a little bit of power (not much) especially if associated with an aftermarket exhaust, I think it runs a little smoother too. The remap is not necessary, I would do one only if you install a complete race exhaust. I haven't found any cons yet. I hope this helps.

@greggusan

6 жыл бұрын

Thanks for the reply. I've gone ahead and ordered my K&N filter, and will install it with the help of your excellent video! Thanks for making these and look forward to more. By the way do, having spent more time with that Remus exhaust, what do you think? What other mods are you planning? Any thing that might eek out a little more power? (if that's even possible..) Would you need a ECU remap with that exhaust and filter set up? Suspension upgrade? Cosmetic mods? Oh and one last question if you don't mind: Where do you find the torque values? Thanks again and keep up the great work!

@AlbesADV

6 жыл бұрын

+greggusan thank you for watching, I think the Remus is a little too loud, but other than that is pretty well built, I'm planning to install a few protections, like crashbars and so on, and a few cosmetic mods, the remap is not necessary unless you use a full system and want to get the most out of it. Possibly I'll do some suspension mods depending on budget and power wise, maybe I'll tinker with the sprocket to get a faster acceleration. If you do a search for maintenance manuals there is a PDF version floating around with the torque specs. Ride safe.

@jasonmoto

6 жыл бұрын

Thanks for the vid!💪 I replaced mine, on thing I noticed is...how to describe it...when pushing the bike hard it makes a different sound after about 6000rpms almost like a kickdown or overdrive? Anyone experience this? I have a aftermarket exhaust and booster plug, but only after air filter change dis I notice it.

Hola, en que mejora el uso de este filtro con respecto al original ??? Gracias!!!!

@AlbesADV

Жыл бұрын

mejor flujo de aire, respuesta más aguda del acelerador 😀👍

Albe do you have a tutorial on how to install that belly pan?

@AlbesADV

4 жыл бұрын

Sorry Stacey, I don’t...

didn't understand the arrow thing on the filter, they should be facing forward of the bike or backwards?

@AlbesADV

6 жыл бұрын

+ripmax333 backwards, they point towards the engine.

@albertredpipe

2 жыл бұрын

I was wondering about that too. Thanks for asking the question and thanks for answering the question 🤙🏽

any suggestion on how to remove service light on 2020 Ducati full throttle?

@AlbesADV

2 жыл бұрын

As far as I know, only the Ducati dealer can

Will this filter change the sound of the bike in some way? Is there a big performance upgrade in horsepower?

@AlbesADV

5 жыл бұрын

No sound difference and very little increase in power

@eirikgrnolen2655

5 жыл бұрын

Okay. Thanks for the response.

How does this filter hold up when going off-road into areas with a lot of dirt and dust? Replacing my exhaust on my desert sled and want to get a better flowing air filter as well?

@AlbesADV

4 жыл бұрын

The filter holds up ok, you are going to have to clean it often, this is not the best filter for off-roading, you might want to try to put a filter sock on it and see if it helps.

@atomic_ryu

4 жыл бұрын

Albe's Adv thanks, I don’t do much off-road, just basic trails occasionally so it should work well enough for me

@AlbesADV

4 жыл бұрын

Mitchell McDonald yes I think it will

When you changed the filter, you didn't have to do a reprogramming? greetings from Mexico

@AlbesADV

3 жыл бұрын

No

Did you have to tune the bike and put it on a dyno ? For the filter

@AlbesADV

5 жыл бұрын

No unless you modify the airbox itself, mind you, a tune is always best, but in this case not necessary

Ciao, sai se il procedimento è lo stesso per la Café Racer?

@AlbesADV

4 жыл бұрын

Ciao, Credo di sì, hanno lo stesso motore 👍

3:56 Hello, nice video 🤘. I also have a Scrambler motorcycle. There is a leak in the plastic box where the air filter is located and where the discharge hose connects. What is this, I wonder? Will it cause me big trouble? What can I do? I used translate while writing these. I hope it was understandable. I would be very pleased if you express your opinion.

@AlbesADV

9 ай бұрын

That might be the breather hose, if you see a little bit of oil, it's normal, there will be more if you overfill the oil. It should not be a problem

@NoobpackTR

9 ай бұрын

@@AlbesADV Could driving for 200 kilometers without stopping have any effect on this? Are these oil-cooled motorcycles able to travel long distances at once? Also thank you very much for your first reply. 🙏

@AlbesADV

9 ай бұрын

@NoobpackTR no, riding for 200km should not be a problem, I've done it with mine multiple times 👍

@NoobpackTR

9 ай бұрын

@@AlbesADV thank you ❤️

Hi, do you have also tutorial how to take out the whole airbox ? I hope you read it 😊

@AlbesADV

2 ай бұрын

I do not, but once you get to this point shouldn’t be much more difficult to take the rest of it off. I read all the comments 😁👍

Will the K&N Filter do anything to the engine characteristics?

@AlbesADV

4 жыл бұрын

Kind off, it feels a little more responsive.

@Ouwkackemann

4 жыл бұрын

@@AlbesADV Thx from Germany.

good job, but, too many steps to replacement the air filter... It's more easy to change the oil! 😁

@AlbesADV

4 жыл бұрын

Lol, agree

Such a question, on my BMW, I lubricate my KN air filter with special oil, is it not necessary to lubricate this filter with air filter oil?

@AlbesADV

Ай бұрын

It is, if you wash it, when they are new, they come pre-lubricated

@user-rt8lm6sq1o

Ай бұрын

@@AlbesADV One more question, I have such a problem, does not show the total number of kilometers, shows only a couple of path and the second path, do not know what could be the problem?

@AlbesADV

Ай бұрын

@user-rt8lm6sq1o I'm really not sure, sorry

Do you know if it’s the same for the 1100?

@AlbesADV

5 жыл бұрын

I'm really not sure but I don't think so, I thought the shape of the 1100 filter is flat

Is there a trick to getting the top screws of the fairings out? Mine just turns and turns but never comes out, and now it won't tighten up again :-/

@AlbesADV

5 жыл бұрын

That is actually a known problem for that screw, the metal thread inside the plastic comes loose and starts spinning, I had to cut it out and JB-weld it back in there.

@jonathanr7754

5 жыл бұрын

So you cut the metal thread out of the plastic? Ffs... looks like a half hour job just turned into an ordeal.

@AlbesADV

5 жыл бұрын

Happened to me when I was pulling the filter out to clean it. Mine was so lose that I just left the screw in and pulled straight out, hard obviously, and yes it took me a while too

First!

@AlbesADV

6 жыл бұрын

+Lee Gener right on Lee

The bike is beautiful, but it is a pitty that in order to perform basic maintenance jobs you must to unscrewing half of the bike. this happens in order to desing a bike from an engine, and not the contrary.

@AlbesADV

6 жыл бұрын

+Juan José Ruiz Alcalá they did have a bunch of 796 monster engines laying around, lol

Der K&N Filter wird nicht viel bringen. Der Luftfilterdeckel sollte im Bereich der Ansaugung modifiziert werden. Einfach ein Fenster ausschneiden oder Löcher bohren und dies mit einem guten luftdurchlässigen Gewebe (Edelstahl oder aus dem Motocross) hinterlegen(einkleben).

Looks like a PITA

the guy who invented this air filter system must have been on drugs! Who would ever think to make it so difficult! I love my ducati, but my Husky filter just pops in and out with no tools in about 2 minutes max, I think the one on the multi Strada you need to remove the gas tank!

@AlbesADV

3 жыл бұрын

We will find out as soon as I can afford a multistrada 😀👍

man, could they make it any more complicated! Honda, is on the side and two toggles and it is open!

@ericwilliams626

3 жыл бұрын

Personally I think these antics are about the contempt for the customer. The Japanese understand the customer's mind when it comes to maintenance and they don't hold it against them. The Europeans can make the most beautiful painting but require special glasses and training to view it.

@AlbesADV

3 жыл бұрын

Eric, very well said 👍

damn this looks annoying to do. on my suzuki i literally just have to pop off a lid and replace air filter in like 30 seconds.

@AlbesADV

4 жыл бұрын

I know, right!

Must strip the whole front end to get to the air filter. Insert f word here!!!

What a terribly thought out design.