Thanks you covered most everything I was needing to know, you also started the motorcycle prior to draining the oil. But said nothing about warming the oil up for smoother draining I think that's a good idea is it not, to warm up the oil prior to get a more complete draining and faster drainage? IDK , but I think so Anyway thanks again
@mikeducat8729
9 ай бұрын
a little bit warm . don"t burn your hands 🥵
@ThePlatform_603 Жыл бұрын
First this video is so helpful, made everything very clear. But what was that other filter you mentioned. Ive seen people talk about it before idk what its for though. Is it something I have to change?
@mikeducat8729
Жыл бұрын
THIS IS FROM THE DUCATI TECHNICAL SERVICE MANUAL IT'S THE FIRST FILTER IN THE OIL SYSTEM Every two oil changes, clean the oil intake mesh filter. Remove the cap (3) and recover the O-ring (4). Unscrew the mesh filter (5) withdraw it from its housing. Clean the mesh filter with petrol and compressed air. Take care not to damage the wire mesh. Refit the mesh filter (5) and the plug (3) with the seal ring (4); tighten to the specified torque (Sect. C 3).
@lucfranssen226 Жыл бұрын
Thank you very much!!! Question, this here is an 749 s, is it the same for a normal 749?? Wich synthetic oil do you use please? Thanks!! Luc
@mikeducat8729
Жыл бұрын
Penrite MC-4ST 10W-40 100% PAO & ESTER in the passed i used MOTUL 5100 4T 10W 40
@lucfranssen226
Жыл бұрын
@@mikeducat8729 Thank You, have a good day!!!!!!! From Belgium!
@mbvalency Жыл бұрын
No need for tightening oil filters with torque. I always do "hand tight" with cars and motorcycles. Not a mechanic, but I think it's ok to do it like that.
@mikeducat8729
Жыл бұрын
there more for people who over tighten
@piotrb29579 ай бұрын
Jaki Ty przykład dajesz bez rękawiczek ochronnych babrac sie w oleju…. Mechanik
Пікірлер: 10
Thanks you covered most everything I was needing to know, you also started the motorcycle prior to draining the oil. But said nothing about warming the oil up for smoother draining I think that's a good idea is it not, to warm up the oil prior to get a more complete draining and faster drainage? IDK , but I think so Anyway thanks again
@mikeducat8729
9 ай бұрын
a little bit warm . don"t burn your hands 🥵
First this video is so helpful, made everything very clear. But what was that other filter you mentioned. Ive seen people talk about it before idk what its for though. Is it something I have to change?
@mikeducat8729
Жыл бұрын
THIS IS FROM THE DUCATI TECHNICAL SERVICE MANUAL IT'S THE FIRST FILTER IN THE OIL SYSTEM Every two oil changes, clean the oil intake mesh filter. Remove the cap (3) and recover the O-ring (4). Unscrew the mesh filter (5) withdraw it from its housing. Clean the mesh filter with petrol and compressed air. Take care not to damage the wire mesh. Refit the mesh filter (5) and the plug (3) with the seal ring (4); tighten to the specified torque (Sect. C 3).
Thank you very much!!! Question, this here is an 749 s, is it the same for a normal 749?? Wich synthetic oil do you use please? Thanks!! Luc
@mikeducat8729
Жыл бұрын
Penrite MC-4ST 10W-40 100% PAO & ESTER in the passed i used MOTUL 5100 4T 10W 40
@lucfranssen226
Жыл бұрын
@@mikeducat8729 Thank You, have a good day!!!!!!! From Belgium!
No need for tightening oil filters with torque. I always do "hand tight" with cars and motorcycles. Not a mechanic, but I think it's ok to do it like that.
@mikeducat8729
Жыл бұрын
there more for people who over tighten
Jaki Ty przykład dajesz bez rękawiczek ochronnych babrac sie w oleju…. Mechanik