odd that you have your RGB 120mm fans (on the radiator) facing out.

@def-po8tu

4 ай бұрын

I was thinking the same thing, kind of weird.

@Lewdacris916

Ай бұрын

so many builders on here dont understand how fans work, the PUSH force is much greater than the PULL force. Push config will give much higher air flow.

the background music 😂

Beautiful ... glad to know it fit 2-fan AIO.

Awesome Build Guys!!

RAM module in A1 was not put right and all the way on video in 2:12 :)

One of your greatest videos yet AAA+ all is phenomenal from the music to the parts awesome work. one question why the in and out of the rad for the GPU was near the cpu rad and not on the other side. Waiting for more awesome work 👍👍👍🔥🔥🔥

really? i just bought this case, and this is a "Dream Build"???? Gawd

Man, that is exactly what I was looking for! Long and detailed PC building video without talking, so I can enjoy looking at the whole sistem coming together in silence ! Thanks

Video is nice, but tittle of the video is misleading. It is NOT dual radiator loop build! It IS dual AIO build.

nice ..Thanks to all

I think I’m in love

amazing build

Nice build! The video also answered my question about a 54mm thick radiator (Hardware Labs GTX series) fitting between the mesh side panel and the 360mm bracket. With a standard case fan being 25mm thick, it looks like a 54mm thick radiator won't fit where you have the fans mounted.

@Drunken_Hamster

Жыл бұрын

Just move the fans into the "pull" position, IDK. Could also put a 280mm there, instead. 280 is 392 cm^2 compared to 360s 432, which is still way bigger than a 240 rad at 288cm^2

Wouldn’t adding the AIO to the top enclose the chummy effect that’s supposed to have?

Сегодня буду собирать свой компьютер. Спасибо за видео.

Nice build

Like the footprint but think the motherboard should be Laid down flat and at least 1/3 height cut off and full mesh on both sides with dual fan mounts on bottom as it is, sides, and on top. I would have bottom Front I/O and room in the bottom for CD player and/or 2.5 racks. Hex holes for better air flow throughout like the back and real Fine Mesh Screen for filters. I would only have glass on the Front /Clear Glass.

could you place a universal vertical gpu mount (coolermaster) to show the gpu forwards?

Can two 360mm radiators be mounted behind the motherboard tray (like the tower 900)? Can the motherboard tray rivets be drilled out to move it forward? Looking to replace my Thermaltake Mozart TX with the Tower 500 (Tower 900 doesn't fit under a desk) but I need dual 360mm radiators. Seems like this case gets 90% of the way to the goal but I'll have to so some modding.

@def-po8tu

4 ай бұрын

U can take the entire back tray out but i don't think u can put rads back there.

What's the soundtrack for this? It's a welcome surprise for a PC build video to have more subdued music.

guys please 🥺 give part list on description

Can i ask why u put ur aio fan outside ?

Music reminds me of BF1 soundtrack 😍

cool

Music sound like John wick about to infiltrate the Smithsonian

Why doesn't my Kraken Z63 AIO Radiator fit in the top? Any help?

What was the exact model of the motherboard? ASUS ROG Strix Z690-E?

I can't see how external cables are attached to the MB rear panel ports. like cable of GPU ? Please let us know

Is that the fan cable normal?? So long 🤔

What the largest radiator you can fit on the top? 280??

Is that intentional that you got the side panels switched? The glas is supposed to be in front.

Where does the background music for this vid come from?

Does anybody know if Nzxt Kraken 280 elite or z63 gonna fit on top?

Out of all the questions I could have - My biggest is what camera did you shoot this video with ? :)

@ThermaltakeAustralia

Жыл бұрын

This was shot on the Sony A7S III, in 10bit 4:2:2

dreambuild = custom loop not just any aios

I'm curious would this be able to sit on top of a ALEX drawer from Ikea?

@ThermaltakeAustralia

Жыл бұрын

Good question, the Tower 500 would not fit on a standard ALEX drawer, the base is slightly wider.

NGL this is so aesthetically pleasing but the music takes it to another level

Why there is no part description? 😢

The components all are top notch but in a dream build I think an I9 should be present instead of an I7, good job Buds!!

There has GOT to be some way to plug a cable into the GPU and to access the ports on the MB. . . .

@ThermaltakeAustralia

Жыл бұрын

Imagine if we released the case without the ability to do that! 😂 👀

Am i tripping, where do you plug in the display port for your card?

@iHeatlock

Жыл бұрын

There is this box shaped part where you bolt the GPU so from there you insert the cable it's covered by the top side. Look at 19:00

@midniteoyl8913

Жыл бұрын

Display and I/O cables connect to the top and route out of the top back through the slot provided in the top piece shown @ 30:26

anyone has the list of parts?

hello would this case fit a 4080?

@RokenPL

Жыл бұрын

it will but you will have to remove one of the panels at the bottom of the case same as with 4090 both cards are too long to fit like in this build.

where hdmı cable soket

😘😘😘😘😘

Be interested in temps/perf this build would run blender cpu and firestrike stress etc. A similar build is discussed here kzread.info/dash/bejne/gJuF1tFmc7bRhNo.html.

the music was not necessary you know a guide step by step would be better something like Gamer Nexus does for example

I think Thermaltake paid you a lot of money for this ad because there is no sane person on the planet who would replace ROG fans with Thermaltech fans.

@icebtw6802

7 ай бұрын

You’re surely joking right?

A normal build… aio is of course a single loop 2 aio = 2 loop and every one can assemble easily… just grab to the box, smash in the case, job done… custom dual loop is another thing…

The glass on the front of my cabinet simply broke while I was using the computer, I don't know why this happened, when I looked to the side, pieces of the front glass fell to the floor... does the warranty cover this? If they don't want to cover it, can I find a replacement part? it simply broke... and it's been 9 days since it arrived....

The glass on the front of my cabinet simply broke while I was using the computer, I don't know why this happened, when I looked to the side, pieces of the front glass fell to the floor... does the warranty cover this? If they don't want to cover it, can I find a replacement part? it simply broke... and it's been 9 days since it arrived.... please help-me!! 😭

I selected the wrong TYPE of case. I bought the Thermaltake 500 case on looks and cooling expectations. first thing I discovered is this gaming case has no where to mount a DVD (gaming now only requires a network connection. second, I used the frame supplied for mounting a radiator and installed it on the case. The wires for the front controls on the case could not be routed inside the case. luckily i have many tools and was able to modify the case to resolve both my problems. It is still a great case.

Love the video but the choice of music not so much, it was so sad. Like you were having funeral for your PC. 😂 at times music seemed a bit suspenseful, but the music make this sooooo hard to watch. The music gave battlefield 1 soundtrack vibes lol ( IYKYK) all in all great video. (When muted) 😂

@ThermaltakeAustralia

Жыл бұрын

Sorry to hear you didn't enjoy the tracks we chose for this one. For Dream Builds we like to keep the music more muted and slow to help you focus on the building process itself. We will keep this in mind for our next one. Cheers!

This case absolutely fucking sucks to build on.

wrong way the radiator fans.. but good video.. thanks.

jesus christ thats terrible! rgb fans for cpu rad against glass side panel... nice one

Why does no one show the i/o ports on top with the cover off?

so, you cant use the mobo ports or how i get the ethernet and wifi receptors from mobo, and usb ports?

@ThermaltakeAustralia

Жыл бұрын

The top hat has two large cutouts on the rear to enable you to route cables through to the back of your motherboard. 😊

this build is trash. you have the GPU AIO exhausting and thats the hottest component in the case. its gonna have terrible cooling performance. what a waste. better off just running the whole thing on air instead of these two garbage AIOs.