You got all nervous for no reason!!! You did great. TIP… when going for the second press. Use parchment paper instead of the Teflon sheet. It will leave it smoother & less shiny. Do Not use the cheap parchment paper in the pop up sheets from Dollar Tree! It doesn’t have enough silicone on it to call it parchment paper.

@thecraftycloset00

4 ай бұрын

Thanks for the tips I have started using parchment paper recently. Thanks for watching

I'm new to sublimation and I just found you. I just want to say I love your smile!

@thecraftycloset00

25 күн бұрын

Thank you so much 😀, and thanks for watching

very helpful looks good...

Yayy I'm so happy for you because I know the feeling! Haven't tried this yet but I got to try this

@thecraftycloset00

4 ай бұрын

Thanks I was nervous nothing worse then messing up and wasting good materials lol . Thanks for watching 😊

Thanks for sharing this video! This has been by far the easiest video to follow. I've been confused watching some others. However, I ordered the kit and can't wait to use it. I'm a new subscriber to your channel as well. 🙂

@thecraftycloset00

3 ай бұрын

Glad you enjoyed it and thanks for watching and subbing ☺️

❤ love it

Great Job!!

@thecraftycloset00

5 ай бұрын

Thanks! and Thanks for watching!

You did awesome

@thecraftycloset00

5 сағат бұрын

Thanks for watching ☺️!

Great job

@thecraftycloset00

2 ай бұрын

Thank You and thanks for watching

Great video, I tried this today with the same kit and I could not get the sheet to go through the printer. I will try again tomorrow! You've given me hope LOL!

@thecraftycloset00

4 ай бұрын

Which printer do you have? Sometimes they can be moody 😂! Good luck and Thanks for watching

@JMzcarmel

4 ай бұрын

I have a converted Epson ET-2850. I got it to start printing but then it stopped after printing only a tiny part of the graphic and pushed the sheet out. I'll try again at some point. I got frustrated! 😆 🤣 😂

@Linagee562

3 ай бұрын

I had the same problem only the paper got stuck 😢

@b.norm7797

3 ай бұрын

Tape the film to copy paper

@JMzcarmel

3 ай бұрын

I got it to work consistently by taping a piece of painter's tape in the center of the sheet from to to bottom. Yay!!!

I for sure need to try this!!!! What did you search for this type of image in Etsy?? ie., dtf image, svg, or png?? Thanks so much!!!

@thecraftycloset00

2 ай бұрын

These were png images. Thanks for watching 😊

Hey it looks great!! How did you get the gloves to turn out white? I thought white didn’t come out on sublimation Dtf.

@thecraftycloset00

5 ай бұрын

It didn't but the outline on the gloves is black so that's why it looks transferred the glove is actually the shirt color which is white ☺. Thanks for watching

@sir_sparta

5 ай бұрын

Results after washing please 🥺

Sweet! Do you think it can be done on a dark color shirt if you were to add powder 2 times between curing?

@thecraftycloset00

3 ай бұрын

Not sure I just bought a different dtf kit specific for dark fabrics (the powder is actually black) haven’t used it yet, I’m going to try it out and if it’s works do a video! Thanks for watching

Hi, what print settings should you use to print on DTF sheets with a sublimation printer? I get streaks with the black color. Thank you.

@thecraftycloset00

16 күн бұрын

If your getting steaks then you probably need to do a print head cleaning I make several sheets of paper to get it right so don’t get discouraged. Thanks for watching ☺️

I’m curious to know how this looks after it’s washed. I’ve seen this hack before, but the person doing it used a different powder than you did and I don’t think they cured the transfer. But after they washed theirs, it faded drastically.

@thecraftycloset00

5 ай бұрын

I haven't had to wash it yet, so hopefully it will hold up. Yes there are a lot of different powders out there. I will most likely use another powder for comparison. Thanks for watching 😊

Can you do this and use it on glass tumblers? I am typing as I am watching so sorry if I haven’t gotten to that part yet.

@thecraftycloset00

25 күн бұрын

not this method , this is only for shirts thanks for watching

What system do you use to design the image? Can I use the same circuit system I use for sublimation?

@thecraftycloset00

2 ай бұрын

The images I used were from etsy , yes you can you sublimation images as long as they are png files. Thanks for watching!

I noticed your time and heat settings were a little different than what I've seen in most other tutorials. Did this shirt do well in the wash? Thanks!

@thecraftycloset00

Ай бұрын

Yes I make my own setting because usually I feel like the recommended setting always seen either a little to high in temp or pressing time If you watch enough of my videos you will learn I seldom follow the recommended setting lol. As for washing it held up better then expected I have an update coming soon. Thanks for watching 😊

What color settings are you using

@thecraftycloset00

3 ай бұрын

I use presentation paper matte! It’s the best color setting for vibrant prints when using a sublimation printer! Thanks for watching 🙂

Hi….Will sublimation ink work for this? Or does it have to be in DTF INK?..plz help..THANKS!

@thecraftycloset00

3 ай бұрын

This was printed on a sublimation printer using sublimation ink, If you want the DTF effect you will need to use the DTF powder. Thanks for watching

What kind of paper is that

@thecraftycloset00

4 ай бұрын

It’s dtf film paper it came with the kit. Thanks for watching ☺️

Whats the result after wash?

@thecraftycloset00

Ай бұрын

Not the best but not the worse either better then I expected , I have an update on it coming soon. Thanks for watchig

So that sub ink but dtf hack?

@thecraftycloset00

Ай бұрын

Yes it’s my Ecotank (converted) sub printer and the DTF powder. Thanks for watching

Mines keep shooting the paper out

@thecraftycloset00

Ай бұрын

You can try to put a piece of computer paper behind it when you feed it into the printer

@stevent5571

8 күн бұрын

Some put painters tape on top edge to keep DTF straight

My paper got stuck in my printer 😢 why???

@thecraftycloset00

3 ай бұрын

Which printer are you using?

@falandriathomas8276

3 ай бұрын

Same. I have an epson 8550

@stevent5571

8 күн бұрын

I know it’s 5 months later but I bought a dtf sheets with a backing pad that sticks to the DTF so it can go through the printer