Looks exactly like an iShift. Just did one the other day. Same clutch cylinder too just different connection. Does the clutch cylinder need to get pushed back before installing? Does it also have a air hose attached to it?

Que tal, Para bajar una dt12 necesitas quitar el modulo o la bajas completa

Hi Francisco, I have a customer bring in a volvo vnl, clutch pedal not push down at all not an inch, i replace the master cylinder and slave cylinder still have the same problem, i remove the cover plate look inside clutch still engaged. Any ideal what might cause this to happen?

Thanks!

Buen día ojalá subas un vídeo de como desarmar y volver a ensamblar una dt12

Mi camión está teniendo el mismo problema me gustaría saber que es el causante de eso se pone. En cambio pero no se mueve

Pregunta es necesario reprogramar después del cambio del cluth y el actuador

Fransico could you splain if all transsmitions fit all trucks no meter what model thank you

Amigo donde está su taller saludos 🖖

Francisco in what state your shop is located?

Does the tcm need to be reprogrammed if it is disconnected? Just installed a new clutch on a DT12, reusing the actuator; got everything plugged in, but truck just shows -- on the gear indicator.

@zmichealtesfa8559

2 жыл бұрын

Important question did Fransisco answer your question

@tunazfishing4754

2 жыл бұрын

Doesn’t need to be programmed just need to do the transmission learn procedure

@la2toronto789

2 жыл бұрын

How much did it cost to get it the new clutch installed bro?

@ThatDudeCorn

Жыл бұрын

So what needs to be done after clutch is installed? I am a new clutch put in.

@adriantorres8133

Жыл бұрын

Calibrate the clutch actuator, and transmission relearn procedure.

Qué hay, no tienes un video abriendo una transmisión de Detroit quisiera ver cómo se mira adentro

@jesusgarza510

Жыл бұрын

Me uno a la petición ojalá y puedas subir una video para saber cómo desarmarla y volverla a ensamblar.

Hola Francisco . Me puedes dar el número de herramienta para poder alinear el clutch al momento de instalarlo . Por favor y un millón de gracias 🙏

@juanmanrique9422

Жыл бұрын

Ah y para alinear el flywheel también please 🙏

My cascadia is in the shop for this exact problem right now and was wondering how much a job like this typically range from so I know whether or not this shop is over charging me

@SupaSwope

2 жыл бұрын

Just call other shops and ask

@vapoiu56548

2 жыл бұрын

How many miles on your dt12 clutch when it needed to be replaced? How much money? Thanks

2013 Freightliner Cascadia dd13 I took it to get a pm done and when I got it back my truck won’t turn on unless I spray started fluid. What can it be? It wasn’t doing that before the PM now every time I turn it off only way I turns on is if I spray starter fluid

@angelacosta4567

2 жыл бұрын

Check your small fuel litter cap, sometime it gets damaged when installing it.

@Eric23446

2 жыл бұрын

@@angelacosta4567 thanks

Un solo disco y no es de broze ?

buenas ..saludos ..me pueden apoyar con el torque de los tornillos del volante de clucht de un cascadia125 motor DD15 por favor, standar de 18 velocidades.

You are speeding the video that I'm having trouble understanding how to put the clutch on because of a dow that I need to align

Is it harder to replace the clutch on a automatic than a 13 speed??

@raymondromero4558

Жыл бұрын

13 speed involves more work

@iankerr1549

11 ай бұрын

Definitely does not what are you smokin

Is there anyone else that does videos like this besides Francisco amaya??

after how many miles did it go bad

@adriantorres8133

2 жыл бұрын

Got 836153 out of the one I just replaced.

@Shigles

2 жыл бұрын

depend how you driving and houling around 400.000 - 700.000 for sure you will have to change

@vapoiu56548

2 жыл бұрын

@@adriantorres8133 that's pretty good, you haul heavy hills, or light and flat?

How much for the work

@joaquinsandoval871

2 жыл бұрын

$1600

Narrow space and dirty mud for the clutch replacement. Please ask the company owner build a tunnel. A truck lift elevator is the best.

@oscaribarra9740

2 жыл бұрын

This is the real deal man, no lifts or tunnel. Just a will to get it done.

@JoseMartinez-jl1mk

2 жыл бұрын

@@oscaribarra9740 The employer responsible for improve the safety working equipment

@angelacosta4567

2 жыл бұрын

Sometime you have to use what you have to get the job done.

@alex7289

Жыл бұрын

He is the employer.

you need a camera man that can hold it still

U need a camera man

Hi, this is Rock Rooster Footwear. We sent you a collaboration invitation email. Please check if it’s in the spam. Thanks!