Great job, You ever use Fibafuse tape extra thin you embed it with filler, its great for butt joints etc
@ChrisWhittaker74
26 күн бұрын
Thanks buddy 👍, no I've not tried it , I will, however, now look and give it a bash 👍👍the black tape I'm using is finest we use , but anything that makes my job easier is always a game changer 👍 👍👍
@markpreston62927 күн бұрын
Cheers Chris; Just about to go back self employed sparky, nice to have a refresher in patching.
@ChrisWhittaker74
27 күн бұрын
You're welcome mark buddy 👍, hope it goes well going back self employed on the tools 👍👍
@onelifelivit.518326 күн бұрын
Interesting ,tanx for the upload
@ChrisWhittaker74
25 күн бұрын
Thanks buddy 👍
@hendrix247826 күн бұрын
I work in social housing in Hampshire, this spot on thank you..
@ChrisWhittaker74
26 күн бұрын
You're welcome buddy 👍
@cannontrodder26 күн бұрын
You are a natural at this mate. Would love to hear more about your job and how you make a living. Are you basically just going to sites and bombing through loads of patches?
@ChrisWhittaker74
26 күн бұрын
Hi buddy yes , I work for a large plastering firm , I basically go from site to site putting any bad work right 👍
@davidkay492312 күн бұрын
Hi Chris. Cracking series as i am working through all your videos. Can you use woodsrews instead of plaster board screws?
@mightymax23223 күн бұрын
I am stripping off wall paper in a room and want to go over the walls with filler to take out holes and defects. The skim coating is firm enough. Do you recommend doing other prep such using a sealer as the wall has been papered over since the skim was applied?
@ChrisWhittaker74
23 күн бұрын
Hi buddy, I would recommend using easifill that can go straight onto plaster with no need to prime or seal 👍
@mightymax232
23 күн бұрын
@@ChrisWhittaker74 Great and many thanks Chris for the advice. Really enjoy and learn lots from your videos. I am glad I found you on KZread.
Пікірлер: 16
Great job, You ever use Fibafuse tape extra thin you embed it with filler, its great for butt joints etc
@ChrisWhittaker74
26 күн бұрын
Thanks buddy 👍, no I've not tried it , I will, however, now look and give it a bash 👍👍the black tape I'm using is finest we use , but anything that makes my job easier is always a game changer 👍 👍👍
Cheers Chris; Just about to go back self employed sparky, nice to have a refresher in patching.
@ChrisWhittaker74
27 күн бұрын
You're welcome mark buddy 👍, hope it goes well going back self employed on the tools 👍👍
Interesting ,tanx for the upload
@ChrisWhittaker74
25 күн бұрын
Thanks buddy 👍
I work in social housing in Hampshire, this spot on thank you..
@ChrisWhittaker74
26 күн бұрын
You're welcome buddy 👍
You are a natural at this mate. Would love to hear more about your job and how you make a living. Are you basically just going to sites and bombing through loads of patches?
@ChrisWhittaker74
26 күн бұрын
Hi buddy yes , I work for a large plastering firm , I basically go from site to site putting any bad work right 👍
Hi Chris. Cracking series as i am working through all your videos. Can you use woodsrews instead of plaster board screws?
I am stripping off wall paper in a room and want to go over the walls with filler to take out holes and defects. The skim coating is firm enough. Do you recommend doing other prep such using a sealer as the wall has been papered over since the skim was applied?
@ChrisWhittaker74
23 күн бұрын
Hi buddy, I would recommend using easifill that can go straight onto plaster with no need to prime or seal 👍
@mightymax232
23 күн бұрын
@@ChrisWhittaker74 Great and many thanks Chris for the advice. Really enjoy and learn lots from your videos. I am glad I found you on KZread.
Mint thumbnail pal
@ChrisWhittaker74
26 күн бұрын
Cheers Scott buddy 👍