So scammers can advertise "waterproof" products using this. Lol

@Suitswonderland

3 жыл бұрын

Labeling it Dry waterproof would be amazing actually since you will think the Dry is just something they are adding because it keeps you dry.

@parvbhatt9671

3 жыл бұрын

but its too expensive

@HSMAdvisor

3 жыл бұрын

I bet using just pure alcohol is cheaper

@pinkiepie8010

3 жыл бұрын

As if a scammer would spend so much money.

@Suitswonderland

3 жыл бұрын

@@pinkiepie8010 Yeah dude because this is a serious idea.

The crazy part is that it isn't flammable despite being super volatile and immiscible with water. It is volatile and with extremely low viscosity yet has a high density and molecular weight. Truly a weird set of properties to coexist in one material..

@1xBublex1

3 жыл бұрын

it might seem weid at first but its actually quite understandable. Its density and weight as a liquid (and vapour) is highly dependent on intermolecular interactions but even more by its molecular weight. Because basically every H-atom (weight = 1u) is exchanged by a fluorine atom (weight = 19 u) its molecular weight increases quite drastically compared to the (lets call it) 'non dry water'. also the molecular structure itself should be a bit smaller in volume with the CF bond being quite strong and therefore a bit shorter than CH bonds. The high volatility might be further on caused by the strong repulsive interactions of C-F groups to each other (here again intermolecular interactions). so in the end its just a funny coincidence, that the high molecular mass and small molecular volume might help condense it @ about 200K but it just breaks down to vapour at slightly above 40°C . edit: I just looked it up and the average bond length of C-F is about 1/3 longer compared to C-F bonds. therefore this is false. nevertheless, the molecules molecular density should increase and of course much more characteristics have an effect on its density in general.

@bordoyct8246

3 жыл бұрын

@@1xBublex1 what in the bill nye 🤣

@trippzy8048

3 жыл бұрын

@@bordoyct8246 bruh frs i already hear the theme song playing 💀

@DuyNguyen-lo2mm

3 жыл бұрын

@@1xBublex1 how is smaller mass have smaller volume do you mean it structure the way they connect ? it connection has more bend vs elongated?

@alexpotts6520

3 жыл бұрын

Fluorine chemistry is really cool, fluorine compounds can do things nothing else can. We should all be really grateful to the 19th-century chemists who risked, and sometimes gave, their lives trying to isolate it. I don't think he even mentioned the most interesting potential application of fluorocarbons. They turn out to be fantastically good at dissolving non-polar gases - in particular oxygen, which means that fluorocarbon-based formulations are being investigated as a form of artificial blood. Imagine blood banks being a thing of the past because we could make our own...

Finally, i can shower without the water being so wet

@mastershake42019

3 жыл бұрын

Be a pretty expensive shower. My MR beast will do it

@sirtko

3 жыл бұрын

😅😂🤣🤣🤣

@bryantmorris2744

3 жыл бұрын

Water is not wet

@Atharva26304

3 жыл бұрын

@@bryantmorris2744 water is not wet

@butterisawesome6969

3 жыл бұрын

@@bryantmorris2744 the fact that there is something called "dry" water proves that "normal" water is indeed wet!

Gordon Ramsay: "This water is dry"

@reallyric5929

3 жыл бұрын

Looolllll **throws glass across kitchen**

@tjkaz5419

3 жыл бұрын

Water: No Donkey, You are.

@losiglowful

3 жыл бұрын

Touch it!!!!

@mdadnan_121

3 жыл бұрын

This water is Dry as sand 🤣

@danilasolovjovs8019

3 жыл бұрын

Its dryer than the Sahara desert

I would like it to see it frozen.

@Driga_

3 жыл бұрын

@tester123532456 bruh

@ozzymandius666

3 жыл бұрын

Yes, I wonder what its freezing temp is. I'd like to see a PVT/phase graph of this stuff.

@slowlymore2

3 жыл бұрын

it freezes at -108c so that gets a bit tough

@karicowo

3 жыл бұрын

@@ozzymandius666 You can probably find it on the 3M website, as they are an engineering company

@dinil5566

3 жыл бұрын

@tester123532456 lol

That's an incredibly interesting way to see where heat is on a motherboard

@unity__3829

3 жыл бұрын

Water cooling on another level

@ricolonium

3 жыл бұрын

See also Der8auer for more information to this topic =D he uses a closed sysem to cool a whole case with 3M Novec

@headbanger1428

3 жыл бұрын

And toxic, isn’t it? Must be a closed system with hopefully redundant leak detection, or your sleeping dog or cat is dust.

@louistournas120

3 жыл бұрын

Another way would be to produce a lot of diethyl ether and dunk the mobo into it. The bp of diethyl ether is 37 °C and it is easy to produce. It also forms diethyl ether peroxide when exposed to oxygen and UV and that is shock sensitive.

@headbanger1428

3 жыл бұрын

louis tournas Ha ha! Just for all the kiddies that have access to eBay and Amazon, please take his post as a joke. That crap will explode or at least catch a serious fire long before you level up.

Actually it is already used for cooling in some data centers. The liquid may be expensive but you only need to buy it once, as it's not getting lost in the process. What they do is they add little heat spreaders to CPUs, which also helps to transfer heat faster to the liquid and everything runs inside a completely closed tank so that evaporated liquid cannot escape.The cover of the tank has head spreader on the inside and a massive cooling system on the outside, so that evaporated liquid will condense at the cover and fall back into the liquid, just as shown with the glass of ice water. Of course you can build the same thing with air cooling but the liquid transports heat much better than air does and because of that you need no fans so there are no movable parts involved that may fail. Also nothing will get dusty or dirty over time. You can also use water cooling to avoid movable parts and dirt, yet water will be a problem if you ever get a leak in the cooling system. And you don't need a lot of that fluid. As soon as all parts of the system are barely covered, the cooling system will work reliable. The fluid is not really "cooling" the system, its task is just to transfer heat quickly to the actual cooling system sitting outside of this tank. The real cooling system will use conventional air cooling or water cooling but it can use massive components, as it doesn't have to fit onto tiny chips, it's a big rig on the cover of a big tank.

Me watching youtube instead of going to sleep: Hmmm yes dry water.

@Stellarffxi

2 жыл бұрын

same

“it releases dangerous vapors when exposed to ultraviolet light” then he shines a blacklight all over it 😂 lol

@CANTIJustPostacommen

3 жыл бұрын

Jamdouglass but only when you pour it in your ear first apparently

@haraldseineoma

3 жыл бұрын

And I don't think it was a real ultraviolet light, to be honest.

@MeowtronStar

3 жыл бұрын

That's hydrofluoric acid. Small amounts vapors wouldn't outright burn you or anything. But deliberately inhaling it is not healthy.

@750kv8

3 жыл бұрын

Most likely just a deep violet LED, with its spectrum barely reaching into the UVA range.

@htcmlcrip

3 жыл бұрын

He wears a mask. Remember? We all do nowadays so no extra precautions needed

They did it They made the "is water wet" an actual topic Why science

@SpiriDussgaming

3 жыл бұрын

Water is not wet, it gets stuff wet. You are welcome

@puckry9686

3 жыл бұрын

@@SpiriDussgaming water is wet

@rodesu9572

3 жыл бұрын

@@puckry9686 water is wet and not wet at the same time

@tahaaghani

3 жыл бұрын

@@rodesu9572 Water is not wet. It's only wet when it touches the surface of objects.

@SpiriDussgaming

3 жыл бұрын

@@puckry9686 kzread.info/dash/bejne/pWF4ypdqc5OamcY.html

I've actually been looking for 3M Novec for ages. Turns out they're the perfect fluid for liquid cooling computers since you can submerge an entire motherboard without the risk of electrical failure

@rikwisselink-bijker

3 жыл бұрын

You could probably use some tips and tricks from mineral oil pc cooling.

@Netsuko

3 жыл бұрын

It's been done before, mostly as showcase. Problem is that you need to seal the case so the Novec doesn't evaporate.

@Iskandr314

3 жыл бұрын

Never heard of distilled water?

@rikwisselink-bijker

3 жыл бұрын

@@Iskandr314 You can't use distilled water, because it will not stay demineralized for long. So you will get a short fairly soon.

@throttleandclutch253

3 жыл бұрын

Have you thought of using dcm or Cubeain they both have a boiling point of around 55c and are Innert to plastics plus they are like 5 Times cheaper

I work with this chemical daily (Specifically 3M Novec - HFE7200 (75°C boiling point). It is very fascinating for a liquid to evaporate faster than brake cleaner and have no smell. It also doesn't cool down skin like acetone or isopropyl alchohol. The only thing is these fluid are very very expensive at about 512$/Gallon. He also didn't mention most of these can still flow at very low temps as well. For Novec 7200 it remains a viscous liquid until -70°C. And it has a very high thermal coefficient of expansion. About 1.4x volume from cold to hot. this also means the density when its very cold is nearly 2x that of water and when warm its still about 1.5x heavier that water.

ACTUALLY: The reason why it doesn't make paper soggy has nothing to do with viscosity. It is because water forms H-bonds with cellulose hydrating the fibers.

@DrBrainTickler

3 жыл бұрын

Which makes it viscous? Heh heh. I'm not savvy enough with chemistry to understand you with any confidence. Although, I would like to.

@why_though

3 жыл бұрын

@@DrBrainTickler In simpler terms: Water bonds weakly to the paper molecules changing them and sticking to them. The other substance doesn't bond very well so it just drips off. If water didn't bond it would drip out just the same. Viscosity doesn't have much effect here.

@jayflayplayz3616

3 жыл бұрын

Cellulose chains are inter-connected by OH-O-type hydrogen bonds to form flat sheets with CH-O hydrogen bonds. Water is a good polar solvent. Among its properties, water molecules are solvent ionizing and dissociating molecules. Cellulose polymer is hydrophilic and tends to strongly interact with water.

@ayporos

3 жыл бұрын

@@DrBrainTickler The difference is that viscosity refers to a substance (be it liquid or gas)'s ability to stick to itself (i.e. other molecules of the same substance) whereas what alex1 is referring to is water's ability to form bonds with other substances. Note that a h-bond is an inter-molecular bond, so the water molecules aren't actually 'reacting' with the cellulose to become a single 'material'. Think of water and paper as the two parts of a velcro strap (where the water is the part with the hooks and paper is the mushy soft part) and then think of dry water as a completely smooth and flat surface... I feel like that'd be an apt visual analogy. The water and paper aren't 'becoming one' in a sense so you can still dry off all of the water from wet paper.. however the intermolecular h-bond that forms IS strong enough to pull at the paper sufficiently to deform it which is why it won't be nice and flat anymore once you dry it off and it will have some deformities.

@Unethical.Dodgson

3 жыл бұрын

@@ayporos Basically this yeah.

Well. I didn't think I needed to make a dry-watercooled PC...

*Proceed to turn my grandma aquarium into a gaming rig*

@sauercrowder

3 жыл бұрын

Could already do this with mineral oil tbh, would be a lot cheaper. It's been done many times over, I remember seeing fish tank rigs 10-15 years ago, and they were prob old photos at that time.

@nicholasbeard2259

3 жыл бұрын

Mineral oil makes a mess tho this wouldn't the oil still kinda ruins a pc because you will like never be able to clean it off

@nicholasbeard2259

3 жыл бұрын

@@sauercrowder so this stuff is more expensive but so much nicer

@o_owhat2471

3 жыл бұрын

HxH is the best

C6F12O as "dry water" , seems legit. It doesn't even have a single hydrogen atom in there.

@astronichols1900

2 жыл бұрын

Yeah i dont even like calling it that, for fear it would be tempting to drink. Not to mention it's only resemblance is it being clear. Idk how bad it would even be to drink. edit: Lol, it says in the health hazards: "If swallowed: No need for first aid is anticipated". I still wouldn't try it.

@Atlessa

2 жыл бұрын

@@astronichols1900 I read that as "don't bother, he's already dead"...

@M1551NGN0

2 жыл бұрын

@@Atlessa ROFLMFAO i thought the same 🤣

@BillAnt

2 жыл бұрын

Zero H2O molecules, it's made of perfluoro-methyl-ketone, kind of like acetone with a bunch of fluorine atoms.

The only thing heavier than this water is his accent.

@shawnclifford

3 жыл бұрын

True

@josesoto4440

3 жыл бұрын

Its Borat.

@thisismyname1701

3 жыл бұрын

Nah its not like you cant understand him i like it

@draztraz

3 жыл бұрын

No the only thing heavier then mercury is his accent

@crvptrvp

3 жыл бұрын

Italian?

Holy shit i didn't expect you will drown whole PC in it! What a legend

@memet5811

3 жыл бұрын

der8auer created the same stuff, just search it der8auer submerged PC

@SchimmelAufDemBrot4m

3 жыл бұрын

marshanaan Scheiße, ja! Das hat er!

@memet5811

3 жыл бұрын

@@SchimmelAufDemBrot4m eh sorry i don't understand Germany

@AmericanTerminator

3 жыл бұрын

@@memet5811 Rough translation: "Shit, yea! He did that!" Basically agreeing with you

@tytorubio3271

3 жыл бұрын

@@memet5811 dont worry, i dont understand United States of America either :)

Novec is similar to 3M Fluorinert. Fluorinert was used as the cooling medium in the Cray-2 supercomputers back in the late 80's. When I worked for JBL around that time, we also used Fluorinert for amplifier prototype testing as we could run them at full power without the need for heatsinks by running them submerged in a tank of Fluorinert.

been subed and watching for years now, REALLY love every video you make, thank you ever so much.

If I'm not mistaken, this _has_ been tested as a candidate for liquid breathing and worked. Well, until it didn't a few hours later in rats. The other main issue was with the highly increased risk of pneumonia and other fluid-related infections.

@analogdesigner

3 жыл бұрын

Yes, in the late 1960s it was referred to as "Polywater".

@xponen

3 жыл бұрын

​@@analogdesigner a short for "Poly-merised water". Water that allegedly turn into a polymer, plastic like. I don't think he meant that because "Polywater" is coined probably because people misunderstood oily-water as an actual water.

@analogdesigner

3 жыл бұрын

@@xponen Thanks for explaining that! So back in the late 1960s I saw this commercial on television where they were explaining their development of "polywater". They were showing the various uses of it. Lastly they had a beaker filled with it and took a rat put it's head into this liquid for several seconds. It appeared to be breathing while immersed in this liquid. That's all that I remember.

@mrpoopo2320

3 жыл бұрын

@@analogdesigner the commercial was for the movie the abyss and it was in the 80s

@loganpe427

3 жыл бұрын

@@analogdesigner Why does that remind me of frogs?

Video: “don’t try this at home” Me: *already chugging the bleach”

@LoganT547

3 жыл бұрын

Found the kid making edgy teen jokes

@Obsidian-Nebula

3 жыл бұрын

And eating tide pods

Your videos are amazing! So much to learn! Vrey interesting to know how earths elements reacts and behave. Ive learned alot by watching your videos.

Very entertaining video. Thank you so much for making this... much appreciated!

"unfortunately, we can not drink it " :))) great stuff, with just perfect humor. Now I'll go and Google if caesium will react ti dry water

@liltay5850

3 жыл бұрын

Lol

@thomas127

3 жыл бұрын

Does caesium react with it? I need to find out

@alessandrodimilla8450

3 жыл бұрын

@@bamcr1218 three of us!

@EdwardTriesToScience

3 жыл бұрын

it shouldnt because there isnt anything it could react with, unless the dry water has some absorbed water, or maybe the flourine somehow escapes

@technophant

3 жыл бұрын

I wished he would’ve at least tasted it

My computer: don't even think about it

@laharl2k

3 жыл бұрын

if he added a small heatsink and a fan it im sure it would work way better than even water cooling. The problem is that without surface area it couldnt do much.

@joeylawn36111

3 жыл бұрын

It would work in a closed-loop system with a heat exchanger. One of the first supercomputers, the Cray-1, used liquid fluorocarbons for cooling, as the semiconductor logic available at the time (no CMOS like today) would have burned up with all the heat it self-generated without cooling.

@thisissqueezo1307

3 жыл бұрын

Gunslinger 2 766(6;*

It's so weird seeing the smoke from the match 'floating' on the vapour layer.

@SMPKarma

2 жыл бұрын

it's very cool and off the top of my head, very few liquids can do the same thing. Most volatile and heavy-vapour liquids are flammable eg hexanes, ether etc, and they aren't nearly as dense as a vapour. Chloroform might be a candidate, but its vapours are two times lighter than the one in the video. I guess only perfluoro organics can do that to such an extent.

Thank you for the video. That was extremely interesting.

This reminds me of another 3M product I first heard about in the late 1980s, called Fluorinert (including very similar amazed demonstrations of immersing running computers and other electronics, and using it to find heat-generating circuit defects, etc). I wonder what the difference is between that, and the numerous varieties of Novec.

@pfadiva

3 жыл бұрын

I used to work in electronics manufacturing and we used gallons of Fluorinert. Here's a comparison I found for the two: www.besttechnologyinc.com/precision-cleaning-chemistries/3m-novec-engineered-fluids-solvents/thermal-management-heat-transfer/#:~:text=While%20Novec%E2%84%A2%20is%20based,from%20the%20presence%20of%20fluorocarbons.

@Hydrazine1000

3 жыл бұрын

The Fluorinert product family is the grand daddy of immersion cooling liquid for electronics. It's (really, whats in a name?) based on fluor-based chemicals (perfluorocarbon PFC, perfluoropolyether PFPE) and, while excellent in being stable / inert and having a very high di-electric constant, there is this issue with the stuff having ozone for lunch. Whatever spills and evaporates will cause ozone layer problems, just like refrigerants do. Novec, on the other hand, does not have the global warming / ozone hole issue because of a different kind of chemical composition. But it's also lower in di-electric constant and it's easier for stuff to dissolve into it. It's less inert and less electrically isolating than Fluorinert.

@Looo0007

3 жыл бұрын

i first found out about fluorinert and novec from the watch community. there's this thing called hydromod, where they do DIY liquid filled watches, mimicking some diving watches like sinn hydro. basically it's one of the fanciest solution to put as the watch lume wont get dissolved.

That’s one hardcore water cooling system!

@italengro197

3 жыл бұрын

:D Immagine de-lid-ing the cpu as well!

Most people find ot weird but I love this voice 😂. It is very easy to understand.

@Stellarffxi

2 жыл бұрын

not sure bout ez to understand but i do like it

@surajpatel3044

2 жыл бұрын

@@Stellarffxi😁

One of your best clips. Ty for making it.

Ok, that is some weird liquid indeed

4:44 you heard it here first bois, dry water easily fills the ass hole

@gigschak903

3 жыл бұрын

Was searching for this comment

@user-pl7tf9gv8e

3 жыл бұрын

"...easily fills up, ur asshole..."

@hybridamericandude3575

3 жыл бұрын

Great lol! I read this comment first. Now I have no idea what he really meant because all I heard was fill up your a-hole.

@mustafaalnsour1676

3 жыл бұрын

@@hybridamericandude3575 XD

@homiedclown

3 жыл бұрын

@@hybridamericandude3575 "Easily fills up the vessel"

Truly very interesting! Thank you for the info. Liked and subscribed!

I love all your videos! Can you make a video detailing what elements can be found in electronics! It would be so cool to check off elements on the periodic table. The table of elements can be used as a checklist! Gold-Check,Aluminum-check, iridium- check and so on! As you find elements in capacitors and other computer components you could check them off the table of elements! It would be so cool to see how many elements can be found in the everyday PC or laptop! Thank you for all your hard work!

So you can drown in dry water without even getting wet, cool!

@TAKIZAWAYAMASHITA

3 жыл бұрын

perfect murder weapon

@JassCodes

3 жыл бұрын

@@TAKIZAWAYAMASHITA 😄😄😄

@jameswhatsit

3 жыл бұрын

You would float on top of it, but still suffocate in that vapour layer D:

@miklov

3 жыл бұрын

It was when he poured the vapor layer I thought of it but you can still drown in high density fluids, you just need to tie a higher density object to your feet.

@Dixitkushagra175

3 жыл бұрын

Not if it has dissolved oxygen in it apparently :P

11:30 Send this to Linus Tech Tips!

@dongums

3 жыл бұрын

Someone pls Hahaha

@thomasneal9291

3 жыл бұрын

this stuff is very well known. people DO use it in cooling rigs; it's just too expensive to be viable to use in a standard cooler. IOW... your standard heatsink with air cooled radiator works well for a tenth of the price that making one using a heat pump with this fluid would.

@eric_d

3 жыл бұрын

And to TKOR. I'd love to see them do some experiments with it.

@hahafunny988

3 жыл бұрын

slapped this Linus😂

@Brealiq

3 жыл бұрын

Actually, der8auer already used 3M Novec a few years ago to cool PC Hardware. He named the project Aqua Exhalare. So it's not new at all. kzread.info/dash/bejne/oH2h0qmnp5yYdbw.html

You make the most amazing videos, stunning, thank you

This was an interesting one! I really enjoy the narrator's subtle sense of humor. That liquid is not the only dry thing in the video.

13:05 look, you can see the most active part of the CPU through the bubble density!

@areadenial2343

3 жыл бұрын

I don't think the spot with the most bubbles is necessarily the hottest part. Boiling liquids need a nucleation point to evaporate, such as scratches and imperfections on a surface, or other bubbles. Those bubbles are probably forming on small imperfections in the surface of the CPU.

@loganpe427

3 жыл бұрын

I saw that also, it must be where most of that particular program was being processed! Edit: I guess I'm digressing aren't I?

I remember seeing a video, a few years back, where this substance was showcased as a coolant for a computer. The whole computer was submerged in the substance, just like in Thoisoi's experiment.

Imagine having a shower in that stuff - "cool" shower as it boils and fills the room with (probably deadly) steam, hop out of shower and your dry instantly, or dead.

@GermanTopGameTV

3 жыл бұрын

Also you'd still be filthy, as it didn't desolve any of the things that made you smell bad like your sweat. It would be a weird shower experience, and utterly useless. I'd like to know how it would feel to swim in it though, but filling an Olympic swimming pool is going to be very expensive

@nickusenko1348

3 жыл бұрын

@Kyaru Momochi well you’d just be more buoyant, I don’t think it would be that hard, except for the suffocating vapor

@vyor8837

3 жыл бұрын

@@GermanTopGameTV that's what soap is for

@vyor8837

3 жыл бұрын

@ᴄᴏᴠᴏɪᴅ • ... do you know what soap does?

@vyor8837

3 жыл бұрын

@ᴄᴏᴠᴏɪᴅ • soap breaks down dirt particles regardless of water amount. It's a weak solvent for oils and dirt.

I thought this was going to be an April Fool's video about regular water - which does have a number of extraordinary properties.

I hadn’t ever heard of this stuff. Thanks!

One of the best video I have seen this year❤️

You're a likeable guy showing interesting stuff. I'm gonna subscribe.

I love these videos! So interesting! Keep up the good work!! 👍💯👌👏🙂

Oh man, i love this channel... this guy do crazy tests with really expensive components... all in name of the science

Imagine someone giving you this water in the desert

@loganpe427

3 жыл бұрын

That's just too cruel 😁😁

@michaeldmingo1525

3 жыл бұрын

But can you drink it or not?

@quinndenver4075

3 жыл бұрын

@@michaeldmingo1525 even if it’s not toxic it’s not gonna hydrate you

@jeremyzimmerli4887

3 жыл бұрын

@@michaeldmingo1525 I work with this stuff in fire suppression systems. If you drink this it will make you very ill. It’s not water, it’s a fluorinated ketone.

@themacabrecerberus

3 жыл бұрын

@@jeremyzimmerli4887 -PENTANONE is a fluorinated ketone and the structural formula

I find the experiment with the PC hardware very interesting. There is one thing that "dry water" has shown - that it can absorb heat very quickly. The only real problem with the test was that the "dry water" in turn could not adequately dissipate the heat. But if you had a cooling system that would wash the heat spreader of a CPU with this dry water, which would then be quickly passed on to a radiator system?

@Proximitron

6 ай бұрын

if you use a passive cooler without fan it is sufficient. The limitations of the cooling without passive cooler is the surface area. Because in the moment a bubble is formed, it is isolating the cpu for a fraction of a second. If you have more surface area, this bubbles have less of an impact.

Always very interesting, Thanks 👍

That might be a good substance for cleaning ancient documents & old paintings?

This was amazing, learn something new everyday I guess!

The report was very wonderful, thank you

I love your accent! It really adds a lot of character to your videos.

This water is so expensive that will he spill it every time :D

This is the only time you answer "no" to "is the water wet?"

@tatotaytoman5934

3 жыл бұрын

hahah god

@DraconicDuelist

3 жыл бұрын

"Why Water Is NOT Wet - With PROOF" kzread.info/dash/bejne/p5ut07GMhc-4YqQ.html "Why Water Is STILL NOT Wet - WITH MORE PROOF" kzread.info/dash/bejne/q2F6xtizlK-eZqQ.html

@ryanlie3270

3 жыл бұрын

This proof regular water is wet

@T0N3SH1FT3R

3 жыл бұрын

No water isn't wet, u can make things with it wet. But water isn't wet.

@Milkikomori

3 жыл бұрын

@@T0N3SH1FT3R The whole, is water wet, is like asking if paint is painted, is glue glued or is fire burnt. Language wise we'll say water is wet but really people are referencing that water has the ability to make things wet. So when people say water is wet colloquially they actually mean exposure to it will cause the condition of being wet. It's just a gap in clarity of language. The real question is is cereal soup..

One of the most amazing things I’ve ever seen.

Thank you so much great channel 😀 and excellent information My question is dry water drinkable?

Love your videos!!!! Love from India.

The smartphone got a really amazing LIVE WALLPAPER 😂

That computer setup submerged in dry water is one of the coolest builds I've ever seen. I totally want one now. :D

13:07 thought he was gonna shoot the computer lmao

I remember when they showcased this stuff on beyond 2000 in the 90's. They submerged a television set in it.

brit see that tea bag doesn't make tea at 7:36 in hot water, the brit becomes uneasy, and then leaves the video to make tea to confirm this was just a dream.

Dude you are for real, love it.

This was better than any advertisement for dry water. I'm sold.

I had planed to make an inordinate number of jokes about this, 'D R Y' water afterall. But then you presented your topic and I actually was impressed. No jokes, this was great.

So I'm wondering if water floats on top of this stuff than if you got your phone wet with water and wanted to try and save it, could you submerge it in a tall vessel of this stuff to force the water out?

@thomasneal9291

3 жыл бұрын

it doesn't bond with anything, so any water that is stuck inside or underneath a transistor is just going to stay there. what you need to do is use a hydrophillic fluid that also has high volatility. typically that's an alcohol.

@PajamaMan44

3 жыл бұрын

@@thomasneal9291 what does bonding have to do with displacing water?

Love your work

I expected this to be kind of a clickbait, but very cool video! Nice experiments and good explanations!

_Satisfying to watch the bubbles near the processor 🤗👌🏻_

Congratulations : another very nice video! By the way, what's the name of your cat?

guy 1: my computer is liquid cooled. guy 2: so it has a bunch of tubes in it? guy 1: not exactly... *cuts to picture of a computer in an aquarium*

Nicely explained.

Reminds me of R11. We used to use that to clean parts until they stopped making it.

@IX_C__AmoghBSVPS

3 жыл бұрын

what is R11 man

@MichaelLeeOne

3 жыл бұрын

@@IX_C__AmoghBSVPS R11 is trichloromonofluoromethane a CFC refrigerant that is liquid at room temps and used to be used to flushing units and parts cleaning but it outlawed now.

@pirobot668beta

3 жыл бұрын

Good ole vapor baths...

Love that Borat is doing this

@undercovernerd69

3 жыл бұрын

I came looking for this lmfao after all the Borat adds that's all I've been hearing lately haha

@musicguy20

3 жыл бұрын

Not quite.

@chrismccolm9341

3 жыл бұрын

Ha! Made me spit out my tea 😂

@unagisama5476

3 жыл бұрын

Becaussa it issa naice 👍🏼

@hobbitassassin1

3 жыл бұрын

Sounds nothing like Borat

That is soooooo fascinating and satisfaying to watch!

You wouldn't expect someone to do a topic about dry water in a KZread video while also putting his smartphone and pouring it onto a motherboard while putting the PC at maximum stress. Great content like always thoisoi!!!!

« Hello everyone. Today... » Your accent is such an important part of this channel ! I know what I say is sad but... honest 😅

@nishtha8981

3 жыл бұрын

Yes 😂😂his accent is very different

@SanjeevKumar-sz8sm

3 жыл бұрын

He is a russian ,and he is speaking english just for us ,and i think his accent is well to do very good for even a non englishmen to understand.

@benito5191

3 жыл бұрын

Sanjeev Kumar I do agree ☝🏻 I was just meaning that my ears are kinda addict to his accent, which is cool ! Edit : I’m french and I understand well enough when he talks 👍🏻

@Appoxo

3 жыл бұрын

@@SanjeevKumar-sz8sm We have the german version of SlivkiShow with us. He also does the russian/ukrainian accent

@trapper1211

3 жыл бұрын

it's annoyin as hell

I would love to see dry water being poured onto Teflon (PTFE - Polytetrafluorethylene). It should wet it and stick to it, unlike every other liquid.

@hay0099

3 жыл бұрын

So if you put a water that doesn't stick to anything with surface that didn't stick to anything it sticks? cool

I’ve put my phone in Novak back in 2016 when I visited the 3M headquarters in my country it’s used to clean the electronics quite thoroughly

Very good video, great info, and just when I needed it he said wessel. Made me go all happy happy joy joy.

Insane, this is very interesting. Thank you for sharing.

Would the dry water, being a heavier density than regular water, be used to displace water from electronics by placing the phone in a vat of dry water??

@uspockdad6429

3 жыл бұрын

That was my first thought too. Instead of using dry rice, putting your phone in this should force water to the top, then the phone should be good as new in a few days. I also wonder if it could be used to ‘dry’ solvents and other chemicals.

@Bin216

3 жыл бұрын

Jesse Hicks It doesn’t mix with water, so is unlikely to remove water already under components; the ideal drying agent readily mixes with water and so carries it away in the bulk of fluid, allowing the small quantity solvent remaining to then cleanly evaporate leaving no residue. Acetone (lab grade, not the stuff available to the public which has additives and bittering agents to dissuade accidental ingestion) has long been in laboratory glassware for this purpose, but it isn’t safe to use on electronics as it dissolves many plastics and adhesives used in electronic devices (it dissolves the adhesive used to bond the circuit board (PCB) together for example).

@MaddJakd

3 жыл бұрын

@@Bin216 Exactly, it doesn't mix. Place a wet phone in the bottom of a container of the dry water, it should displace the normal water/ liquid, pushing that to the top of the container. Of course by the time you try such, the normal water may have wreaked its havok, though there have been lucky among us.

@jay_321

3 жыл бұрын

@@MaddJakd Normal water will not "wreak havoc" on electronics as long as it is pure. Pure water is a non-conductor and will evaporate in time leaving no residue.

@jaymethodus3421

3 жыл бұрын

Hmmmmm

I’m a be honest when you came in with that temperature gun I literally was like is he going to shoot the dry water haha I love you’re videos man keep up the good work

Your Videos are always very informative and interesting

1:25 He says Novec 449, Text on image says Novec 649

@nishtha8981

3 жыл бұрын

Ya

@TheMrbunGee

3 жыл бұрын

Well, English is not his main language, as You might guess.

@IronEchoX

3 жыл бұрын

@@TheMrbunGee That might make a difference for anything but numbers. Still, he is only human. Everyone makes mistakes from time to time.

@TheMrbunGee

3 жыл бұрын

@@IronEchoX when it is written - yes, when it is said - It does not matter if they are numbers or not, still completely different language.

@IronEchoX

3 жыл бұрын

@@TheMrbunGee You are correct. However, I still think this is more of an accidental goof rather than an inability to find the right word.

Love your accent!

You are Amazing Sir!! More Videos Please!!

Ur channel & ur work is superb 👍🙏

"So, I think that video was useful for you." Yes, yes it was.

"Don't do this, it's dangerous" - Borat

His accent and way he makes is videos is very satisfying. I could sleep to these.

Thnx for all information very usefull video

Imagine being in a hot tub of this bad boy

@loleq2137

3 жыл бұрын

Acute respirarory system failure time!

@AxielFan

3 жыл бұрын

I wouldn't be very hot because its boiling temperature is around 40degC

@mikhailsilaev9311

3 жыл бұрын

@@loleq2137 maybe with an air tank

@mikhailsilaev9311

3 жыл бұрын

@@AxielFan it'll still be cool

@bluefrenk1750

3 жыл бұрын

@@AxielFan Therefore, you'd feel quite cool actually. Same thing that happens with Acetone. In general, if It has a boiling point higher than water it feels warm on your skin (like Glycerine), otherwise it feels cool

Imagine how cool it would be if someone did a dry water cooled gaming setup.

@DiDe273

3 жыл бұрын

It could boil inside the loop..

@Koichifirst

3 жыл бұрын

check out der8auer 3M Novek gaming PC called "Aqua Exhalare", just like in this video its a submerged pc, but with high end parts :D available in german and english :)

@tgc_-369_

3 жыл бұрын

I am in

@NocturnalLegend

3 жыл бұрын

We should spam LTT to do so.

@Koichifirst

3 жыл бұрын

@@NocturnalLegend Linus himself already visited setups with novec 3M der8auer has a few different versions, but yeah it's awesome :D

There used to be an old refrigerant back in the day called R11 its a liquid at room temp and boils at 31° it was used in large chiller systems and used to come in barrels

Imagine a fully enclosed computer with dry water in it, it would become the ultamate gaming pc