Video starts at 4:08

@hondahaney6404

Ай бұрын

Thanks!

Thanks for offering good instruction. It was helpful to see that this is pretty easy to do-even though I don't like the idea of drilling a hole in my car either!

Excellent instructional video. Shows each step and lets you know what to expect and what to avoid.

do you have a washer-plate at the back of the bumper? will it not loose in the long run because there's only a screw and don't have a washer plate to hold it?

Gotta do this when my 2021 gets delivered from SC tomorrow. This vid relieves a lot of anxiety. Thanks!

Thanks for the tips man! Worked out flawlessly thanks to you!

Thanks for easing my anxiety! I just bought a 2023 Challenger and have been stressing about this process, a LOT!

@markscott9179

Жыл бұрын

kzread.info/dash/bejne/eHxq08mLlZWaeNY.html Maybe this is another option for you?

I've just moved to a state that has front plates and need to violate my Ford's front end in the same way. Thanks for making me feel a bit less bad about it.

Hi Matt. What screws should I use for my vanity plate? The bracket from the Honda dealer for my 2019 Pilot isn’t exactly like yours. In NC we have no front plate requirement so I have to provide the screws. TIA.

Thanks man, need to do this on our car

Well done, sir. And thank you!

Awesome Demonstration !!

What if the dimples in the bumper don’t line up ?

Been really hesitant on whether or not I should add a front plate for Aesthetics on my new 2020 civic sport. (Live in Alberta, Canada) so it’s not required to have a front plate but after looking at it I think it’s worth drilling the two small holes 😂👍🏾

Could you send the link for this bracket

Do you have a link to the license plate holder?

good a real install ,the bumper is not steal drill away

Where did you get the plate holder

If your car has the pilot divots all you really need to do is screw in the plastic screws that came with the license holder. Unfortunately mine doesnt have the damn divots. I still wouldnt actually drill anything.

What kind of screws do I need for the drilling and for mountain the plate onto the holder?

@mrmeach1967

Жыл бұрын

The mounting plate should come in a kit that includes the screws. I eventually succeeded with a 7/32 drill bit after working my way up with a few smaller sizes. The threads measured about 3/16, and having looked at many kits on Amazon, I’ve concluded that this appears to be a standard screw size.

Live in a state that only has one plate. Breathe in the sweet air of freedom!

NOOOOOOO. for god sake NOOOOOOOOOOOO

I’ll never understand the necessity of front plate states

Thanks doing this tomorrow

Came here to see how to do this, Ironically have the same car.

Should of put the sto n show

Good Lord, those NY plates are cheesy. The new white ones look a lot better.

The dealership should have done this on a brand new car. Most states require 2 license plates except for Pennsylvania.

@CompCrasher86

4 жыл бұрын

Thanks. I asked them not to do this because I was going to try and find another way to mount the plate. I eventually gave in and drilled the holes myself. I've also seen pictures where dealers mounted this crooked.

@hilariobalmori5355

4 жыл бұрын

Carlos Indiana doesn't require the front license plate

@yuezhidou8625

4 жыл бұрын

Neither for Arkansas

@edwardchar1

3 жыл бұрын

Add Florida

@kmmmdesign

3 жыл бұрын

Michigan only requires back plate

Haaaaaa a tttttteee :)

Put it in the windshield thats what i did in texas

@VelvetSerpent

11 ай бұрын

You can still get a ticket in Texas for it in the windshield.... It must be securely mounted on the bumper.... Don't ask me how I know 😂😂😅😂

@brianworden7022

4 ай бұрын

​@VelvetSerpent Same with California... issue is my 69 Beetle doesn't have its bumpers when I bought it, and I'm sure wherever they are, the old front plate is attached to it. I forgot all about the front plate when I was at the DMV registering the car last month after I bought it so now I get to go back to report the missing plate and then figure out how to mount the plate. Don't have the money to buy repop bumpers right now and was thinking about getting t bars instead (cheaper) and that means drilling holes under the front trunk lid or on one of the fenders which I really don't want to do to the old car.

Sorry, ain't happening! I am NOT drilling holes in the body of my vehicle & my Honda doesn't have predrilled holes from the factory.

@josephlucero4978

4 ай бұрын

How else would holes be made

Or you could just use sticky velcro

LOL this should get an award for the most overly complicated way to do something simple. The video should have been 14 seconds long. 2 self tapping screws into the plastic. Done! Heat gun? 3 step pilot drilling, to drill an 1/8 inch hole in plastic?? Oops I mean 9/64ths! I was literally laughing out loud watching this! OP is also working on installing an air freshener on the rear view mirror. Sign up to get the 90 minute DVD! HAHA! All in fun 😊 I suppose attention to detail is better than the opposite!

@brandontodd3548

3 жыл бұрын

Omgggg I was thinking the same shit!!

@johanmorales3154

3 жыл бұрын

U pressed?

sorry but I am not drilling holes in my Mercedes.

Yeah bud you can drill holes in your wheels. But in the Home Depot you an find something called double sided tape( strong one) which cost less than 5 bucks. Try that next time. No big job to fix. Peace

Some laws are meant to be broken. This is one of them. Stop being statist sheep and give the middle finger to arbitrary victimless crimes.

I’m gonna be doing something like this on my car, but since my state doesn’t require front plates, imma put my states flag on the front. 2003 LeSabre