This is the first dream build that I see with a sram crankset running smoothly and with pendulum effect.

@dvoob

4 жыл бұрын

pro mechanics actually understand preload, also this is BB30 which is much better than their GXP stuff

@danaponik5276

4 жыл бұрын

@@dvoob you have it backwards there, sir. Their GXP stuff was better. Ask Hambini.

@dvoob

4 жыл бұрын

@@danaponik5276 gxp's preload system is a literal wavy washer. You must not work on bikes very often if you think that's better than the preload collars on SRAM bb30 cranks. If your bike and bb are new and perfect gxp works fine, but we all know that doesn't last.

@TorbenSta

4 жыл бұрын

This is dub and not bb30.

@chrispalmer3096

3 жыл бұрын

@@danaponik5276 lol. Watch the Hambini video again.

Great build. Huge appreciation to builder. Friggin’ top notch with amazing attention to detail. Loved from 14:03 to 17:23. Down to the mm and degree. Great moment at 20:53 when he quietly acknowledges (and well deserved) a fine build. 🤜🏻🤛🏽😎🔥

I was fascinated by your polite, accurate and perfect assembly.

@roadbikechannel

3 жыл бұрын

Thank you for your positive feedback!

This mechanic has been one of my favorite so far.

@bjrahl

3 жыл бұрын

Dan, my favorite too!

Excellent Spintest. No drag. An absolute exeption to the rule compared to many orher "dream builds" on this channel!

Just watched this before 10 hours of the most restful sleep I have ever had...thanks...👍😴

Watched this with my wife and our anxiety level dropped to 0 during that half hour ! Just like a day at the spa ! Awesome build and great music 😜

@roadbikechannel

3 жыл бұрын

Good to hear our dreambuilds seem to be just as relaxing for you as it is for us ;).

Stunning build. What an impressive and skilled mechanic. Mesmerising watch. Kudos

Boy I've never seen anyone go the extra mile and re tap bolt holes! Love it! Beautiful bike for sure!

@roadbikechannel

4 жыл бұрын

It's 5 minutes in top, but you'll never have to worry about it ever again 👍

And heres me still has trouble taking the back wheel off and on

@wujBat

4 жыл бұрын

just service your bike and you will be better and better :)

@teleotto

4 жыл бұрын

Putting the gear into the smallest cog usually helps xD (been there, and screwed up my deraileur hanger...)

@ridinghome4988

3 жыл бұрын

I took out out yesterday, and my discs are rubbing although it's a thru axle :/

@xchinvanderlinden

3 жыл бұрын

@@ridinghome4988 make sure you actually weight the rear wheel on the ground to fully seat the hub in the dropout before tightening your axle. Even though it's a thru axle, there's still a little bit of play that can make the disc rub.

I love watching things I can't afford.

ở việt nam ít người làm được đều này lắm mình rất thích coi những người làm việc như vậy họ có trái tim và lòng thành công với công việc họ đang làm

The attention to detail is amazing 👍🏾

spiritually meditative. Boy, you know what your doing.

@roadbikechannel

3 жыл бұрын

Great you like it! :)

Trabalho impecável, bike maravilhosa. Admiro muito os modelos Trek. Essa edição me faz lembrar a Pinarello Paris branca que o Valverde ultilizou no ano de 2006 salvo erro. Esse nosso esporte é maravilhoso em todas as formas! Saudações do 🇧🇷

kudos to the mechanic for being so thorough, but it doesn’t really speak to Trek’s quality control that he has to re-thread the through-axle and brake mounts, as well as face the brake mounts

@roadbikechannel

4 жыл бұрын

He wouldn't have to. It's just to be a 100% shure the thread is perfect on the Pro Bikes.

@renegodde5483

4 жыл бұрын

That‘s a custom paint job and it may just be the policy that the mechanic that does end control / assembly does these steps (and not the paint shop, that is).

@mmoralescal

4 жыл бұрын

Un mecanico como cualquier otro siendo de trek esperaria un poco mas de delicadeza mas con la bicicleta del campeon del mundo

@itsm3th3b33

4 жыл бұрын

@@roadbikechannel Negative. You don't re-thread an already threaded hole if you don't have to. One mistake and the entire frame is wasted.

@ILOVEDEFENDINGTHE1PERCENT

4 жыл бұрын

I do that too, especially on flat mount surfaces where bits of paint can cause misalignment, except I use a facing tool instead of a file. Paint do get in the threads and using a tap is for good measure. In fact it's very common in road disc frames of any brand.

That was thee most violent hacksaw job I’ve ever seen.

watching you ,from ..valenzuela city..phillippines.. TREK is very good ..🚴‍♀🚴‍♀🚴‍♀

Wow another awesome build! You guys killing it with contents! 👌🏽

Love how the mechanic build the bike and how perfectionist he is for the bar tape part. Climbing bike now is a bit aero. Technology sure is moving.

I salute your professionalism.

I really enjoyed watching this. So relaxing, yet the great skills and meticulous precision like the measurements of the saddle and position that rider will assume is the work of a a true custom tailor besides being an awesome mechanic.. fantastic!

Fantastic job and really relaxing to see the set up👌

This is one heck of beautiful build, love it.

Exactly where the bar tape should end. Job well done

Wow. He takes great pride in his work. The way his put the bar tape on around the hoods, to make it 'just right'.

At least the crank spins on this one 😁

MADS!!!!!!!!!!! What a sweet video of an awesome World Tour rainbow bike!!! Beautiful!!

Holy Macaroni, this IS a tutorial of how a pro really works. (I would not dare to cut the steerer on the bike for once...) But the detail to achieve perfection is stunning!

Spaceship. Jajajaja una nave!!! saludos de Argentina!!!🏊🚴🏃🏻‍♂️

never seen someone cut the steerer tube while on the bike.

@phoeNYkx

3 жыл бұрын

Me too! I cringed at that.

@dolinec

3 жыл бұрын

Good point, all of that scobs/sawdust falling in to the head tube bearings

@Bedasek

3 жыл бұрын

IKR, I was like wtf is he doing. That is rough handling IMO

@liamcook6950

3 жыл бұрын

@@Bedasek tbf he is working on a bike like that for a reason, he is obviously a very good mechanic or else he would not be working on that bike

@salazchoand

3 жыл бұрын

This is because the brake lines are already routed and can´t be removed and re installed easily

Very interesting build, fast and precise

Yes, yes, yes, another wonderfully shot video from this channel. Watching this is somehow both relaxing and informative in equal measure. This is a man I would happily have index my gears - he seems completely at ease with the task at hand, an absolute pro. Why can't he work at my local bike shop ? What a privilege - your job involving building up the bike of the World Champion. Chapeau to you sir, and do please keep this excellent content coming. Perhaps next stop is to knock on the door of UAE team Emirates and have them build up a Colnago C64 for you ? Would be lovely to see a spot of Italian bling !!

Great watching those bike building skills.👏

Didn't even build the wheels! .... No, just playin! Kudos and mad props to the Technician. Cathartic to my inner bike mechanic.

I wish one day my bike is assembled like that, beautiful work on beautiful bike

@KMS2468

4 жыл бұрын

do it yourself, spend 8 hours on it ! :D

Uma das mais belas bikes que já vi, excepcional montagem milimétrica, parabéns ao mecânico pelo excelente trabalho. Sou muito feliz com mina Domane Al3, mas um dia quero uma dessas aí 😬💪🏻🚴🏻‍♂️

Montagem perfeita,cáprichosa, milimétrica. Parabéns,que este mecânico seja a inspiração para aqueles que queiram seguir a carreira com sucesso. Parabéns.

Trek makes some really beautiful bikes.

Brutális. Nagyon szép canga

You are professional mechanics....high paid.

Best bike mechanic I've seen on KZread, nice watch as well.

Perfectionist. I like him! :)

If , I have a bicycle 's workshops, I will learning, meeting with all the best.....great partner 's ...

Magnifique vidéo un régal 👍👍👍

Obra de arte 🤩 Brasil 🇧🇷

Loving these videos. Beautifully shot, really, really impressive and great insight into how pros set up their bikes. Interesting, Mads is the same height as me but is riding a 58cm frame. Ive always ridden a 54cm (or a 56cm if I was on a Trek). He must have long legs with a 79.4 saddle height!

@ILOVEDEFENDINGTHE1PERCENT

4 жыл бұрын

I think his listed height is false, he has to be at least 6ft2 or 188cm

A bottom bracket that actually spins!

For such a perfect build (bike + shoot) it deserves to be in 4K!!!

The amount of fine-tuning is incredible.

Amazing. I wish if I could own that bike. Great videography.

From google translate: If I may ask. What is the width of the saddle at the point where its height is measured? Is it similar to Selle Italia and their "Biomechanical Reference Point" which is 70mm wide?

Il est juste magnifique et félicitations au technicien il assure avec une aisance et une sérénité. je lui cofierais bien le mien.

I hope to see this bike cross the finish line first in a few stages of this year's tdf.

Awesome!! It's a professional job!!

Great job! Very impressed 👍

Hermosa maquina el armado muy bueno el grupo espetacular 10 puntos

Master piece 😊👌

@roadbikechannel

3 жыл бұрын

It surely is! :)

Hello!Beautiful bike and nice job 👏☝

Ultimate ❤️

Bike: Trek Watch: Rolex Hotel: Trivago.

@jrgenskogan914

4 жыл бұрын

Soo true

@matthiaskettner6686

4 жыл бұрын

Firsthgyhgyhuy Lastujhujhuj how would you know it’s fake? Maybe, maybe not, you can’t tell.

@camallan1

4 жыл бұрын

Matthias Kettner polished mid links on a sub and the rehaut looks off

@camallan1

4 жыл бұрын

And the clasp Jesus!

@tuttobicci

4 жыл бұрын

@@camallan1 Mine's real!

Never seen a new frame thread tapped like that before. interesting

Nice bike men

Gotta love a $12k trek freebie!

Bravo magnifico.

@roadbikechannel

3 жыл бұрын

Great you like it :).

He’s being rough with the build because he probably has to make 3 more of these for a single athlete. That athlete is most likely gonna abuse the hell out of them too.

Some day baby, some day!!!

Not one expletive. Amazing.

Stunning bike...

Nice watch

Love my 2018 emonda ! It's been a sweet ride

Beautiful....👌🏻

love your video, showing the detail and lastly the weight. im waiting for pro build allez sprint hehe

Your bike is my dream bike

Es una auténtica belleza.

fantastica bici montada con mimo y cuidado me encanta .

work of art

@roadbikechannel

2 жыл бұрын

Great you like it! :)

@gislasson

2 жыл бұрын

@@roadbikechannel i like a lot all of your videos they are awesome as your work thanks a lot i am already a suscriber cheers from venezuela

Excelente ensamblaje.

OMG literaly my dream bike, Another stunning content keep it up!! Maybe a Colnago build in the near future?

Amazing frame !

Beautiful bike, jus luv those lines Classy build for sure ; )

Très beau vélo ♥️♥️

My new dream bike

Muy bueno el armado una maquina hermosa

Awesome job ! Learned a few tricks in the process... beautiful bike...

What a Dream 😍😍😍

I did not know Wout Van Aert wrenched for TREK!

Was not expecting step 1 to be "tap the axle bolt holes."

looks aweome

Well the way he treated that bike during the build I wonder how many dents and scratches we would find in the paint work after him clattering the tools against it.

@don-hc8se

3 жыл бұрын

Enviousness kills

@chadbarbaro

Жыл бұрын

you are allowed one scratch as the builder. old rule, then it's yours

This Build-up process is just so Enjoyable

Such a beauty

@roadbikechannel

2 жыл бұрын

Great you like it! :)

@angsey

2 жыл бұрын

Can you build one for me? Thanks!

8:28 - Hambini likes that!

Für das bike würde ich alles machen haha

what a bike!!!!

@roadbikechannel

3 жыл бұрын

Great you like it! :)

the background music is good😍 0:00 -3:17

Very complex...impressive technical and professional skills!

03:11 alright. im in love with this guy

Magnifico trabajo🤙🏻

Instead of manually filing the paint off the disk brake mounts, why not use the Park Tool disc brake mount facing tool, and make sure it’s machined as it should be. Most bikes are off a bit, even a high end one like this.

@yonglingng5640

3 жыл бұрын

A Project One ICON-painted Émonda SLR I saw last April had a lot of paint overspray on the fork's disc brake mounting holes. Disappointing I say...

@chadbarbaro

Жыл бұрын

eh no need