The toughest gold to run and work no matter what system! I see a really good example here. Love the tray shots showing the recovery of each. I dont think I will be running fine beach gold but now I would know what to expect if I did. The Miller table loosing gold shows just how tough that material is. I love my dream mat in my cube.!! Thanks for the vid!👍

@TheDSP1970

5 жыл бұрын

Thier are beach miners who are getting way better results than me. They are pros. They love the Dream Mats on the black sand & beach gold. 1st time I go to the beach, I'm going w/ them!

Ok video, Thx for taking the time. I hard rock, with gold cube 4 stack vortex. I decided to find out my loses. 3/4 to 1 gram per 5 gallon bucket. Nothing get's it all. So I put 1st run tail's off to side, then when I have time I rerun them. I was running a 24"X48"Keene sluice into a 24"X48"Bazooka and was losing more. So I like the gold cube.

Where can I buy the magnetic collector ?

What is that magnetic separator your using?? It looks like a must have.

Is that the dredge mat in the xluice?

Hey, im in Anchorage, Alaska n I saw ur drill magnet or whatever that is but I would like to get one myself, can u help me out

@4theloot638

3 жыл бұрын

I think its this one... www.promusicalaska.com/store/mining-equipment/gold-prospecting-accessories/magnets/spin-it-off-magnetic-black-sand-separator-small-black/

Do you get the black sand assayed?

Awesome man..

First of all, thank you for posting this video. I've been considering the dream mat for my 4 stack gold cube as well, since the stock vortex mat is such a pain in the butt to clean out. After watching your video, however, I think I'll stick with the vortex mat. I just don't like that your trailer sluice picked up so much gold. :/

@TheDSP1970

7 жыл бұрын

Mike D it picks that up behind the bottom tray regular cube conveyor mat!!!!!!! Plus it picks up that behind 3x regular conveyor mats!!!! I guess I will release the video showing the loses behind the regular cube setup. You are told by marketing, it gets it all, you were shown by testing, nothing gets it all. Who you gonna believe?

@TheDSP1970

7 жыл бұрын

Ok, let's look at facts; the last cube conveyor belt tray did not catch MORE gold than the dream mat tray above it. Plus it lost gold to the dream mat trailer sluice behind it. Fact, no system catches it all. Only marketing tells you this for sales. Coffees on folks, smell reality brewing.

@2dawgsmiked684

7 жыл бұрын

Khrysos GodofGold alright, dude - quit talking to me like im an idiot. Was your trailer sluice set at the exact same slope as the top two trays? Is that aftermarket pump configuration set to run the same rate as the stock one? Are the dream mat and the vortex mat designed to work at the same flow rates? Did you pan out the 3rd tray (vortex mat) separately? You didn't mention in the video any of those questions, so all I see are a bunch of variables in your trial. I never said that the vortex mat catches it all, so quit trying to start an argument that you can only win by making assumptions. The rest of your video (starting at 23:21) is vague, at best. You still had the vortex mat on the third shelf, so what is it that you're trying to prove? And what's with you quantifying your gold retention by eyeballing it? You don't have to answer any of these questions, but don't lecture me on who "to believe" when your little trial lacks data crucial to support your claims. I'm a clinical scientist by trade, and am very methodical in my approach to most matters - including panning out each vortex tray and tailings bucket separately to see where the gold is being collected (and where it's not). On average, the vortex captures 96% of the minus 1/8 gold I send thru it - which is good enough for me. The vortex mat is a pain to thoroughly clean out, however, and that is the ONLY reason that I was interested in the dream mat inserts for my cube. I thanked you for your video, but if you took it as a passive-aggressive attack, then that's on you. Maybe you should lay off that coffee that you're so hell bent on me waking up and smelling.

@TheDSP1970

7 жыл бұрын

Mike D pump set with a valve at 1100 gpm, bucket tested 3x to confirm. Regular cube conveyor belt mat on 4th tray. 3 dream mat mini trays above it. The trailer of course is not at 15°, it is at 7° and is 10" wide. The video shows the recovery for each tray, even thou I explained I was having trouble catching the flighty gold on the Miller table. I addressed my reply not to make you feel like an idiot. But with overwhelming confindence to a response that wade some incorrect assement of the recovery rate. I will never claim I get better recovery, I don't need to. I can feed the system 3x as fast with same recovery. Ask yourself, do you want the claimed recovery % of the conveyor belt in what you can run thru the box in a day, or the recovery rate of Dream Mat % at 3x the material run in a day. Marketing vs reality. Plus if you don't love, send it back! 100% gaurantee. Sorry for being so...matter of fact. I do make coffee nervous!

i quit separating magnetics untill I run it on the miller table.. the bigger the magnet the more gold gets trapped in with the magnetics..run them and post a video on your results? always run wet to wet, never dump dry material into your cube/sluice/miller table..tho I see you went wet to wet on your miller table that might be part of the scary huge losses you had mix with the fact its such heavy beach sands..also when I run my miller table I only run about a half a teaspoon of material at a time..and leave a line of material at the bottom of the table and periodically brush some up and check for losses enjoyed the video, about to invest in a cube myself but not sure I wanna run DM in it now..lol just my experience's dont take it as me being a D*** LoL

@TheDSP1970

7 жыл бұрын

It is impossible by physics to trap gold with the "Spin It Off", you could if you did not spin it! As the magnet spins, the most pure magnets fight to gain real estate closest to the magnet like a bunch of spinning & tumbling boat props, ejecting the non magnetics very quickly. This purging is so efficient, it has been suggested as a tool to high grade iron ore. The purity level of the magnetics is truly astounding. Buy one, test it. The light bulb will turn on!