NOTE: 5:00 / 7:17 - If you're unlocking a Pint X, you will need to go to the 'Flash' tab instead of the 'Backup' tab. The 'Extractor' is not compatible with the Pint X.

@kevinaustin2115

2 ай бұрын

Where do you get 5076 from to flash to the board? “Flash” only allows you to “Choose File” but you can’t “Backup” a Firmware to modify or reload.

@fixmypev

2 ай бұрын

@@kevinaustin2115 To clarify, the backup process doesn’t produce the firmware files. It only produces a bootloader-settings file that is the basis for running firmware to the microcontroller. For information on Gemini - 5076, feel free to send an email at www.fixmypev.com/contact-us.

@wadewilcox5890

2 ай бұрын

@@fixmypev back to what Kevin asked. During this video you state that you CAN do this with the pint x, but you are showing only the Pint being autoflashed through ffmwheel, which pint x is not compatible, you have to upload the firmware through the "Flash" section. Where do you find the file to flash onto the pint x? Are you able to show the process of getting the "downgraded" firmware onto a pint x?

@fixmypev

2 ай бұрын

The Pint X is compatible with the ‘FLASH’ function of FFMWheel, but nothing else. The Gemini - 5076 file can be located on the ‘RESOURCES’ tab. As for the process: - Unlock w/ Unlocker Tool - Navigate to ‘FLASH’ tab on FFMWheel - Flash Gemini - 5076 The only difference between this and the OG Pint process is that you can’t ’BACKUP’ or ‘PATCH’ the Pint X. Only ‘FLASH.’

@wadewilcox5890

2 ай бұрын

@@fixmypevyou rock! I’ll try it out

Thank you for this tutorial. I got sucked into the upgrade and thought I was doomed to haptic. You saved me!!

@fixmypev

2 ай бұрын

Awesome! Happy to help. 🤙🏼⚡️🛠️

Straight to the point, easy to follow and super informative! This is so great for the community. 🎉 Thanks for the great video.

@fixmypev

3 ай бұрын

Thanks for the support, Scott! 🤙🏼⚡️🖤

Absolute game changer! I bought a Pint pre-owned, saw there was a firmware update when first connecting it and, downloaded it without thinking anything of it. I was so pissed when I realized how much the haptic buzz update screws you out of.

@fixmypev

3 ай бұрын

The shackles have been removed! 🤙🏼⚡️💯

This is awesome, praying this is possible soon for other affected models

@fixmypev

3 ай бұрын

Same! 🙏🏼

This literally saved my riding. I wasn't enjoying riding outside of my commute because of haptic buzz. My Pint X would dip the nose if i even hit a crack in the pavement because of the haptic buzz. I also thought that i had wrecked my battery during the winter since my board would just feel sluggish even at 70-80%. Now, it may be placebo, but my board feels much better down past 50% now and the nose doesn't give out to cracks in the road. It also seems like the battery just lasts longer in general. Now a quick tip with the Pint X process, have the unlocker tab and the flash tab open and pair the board to both tabs and get the flash page ready and loaded all the way to the point of clicking the flash button. Then do the steps for the unlocker and then hit flash right away once the unlocker shows the green text. I think it all has to be done in less than 20 seconds give or take. That's how I got mine to work after many attempts since I didn't realize I could pair to both tabs at the same time. Thanks for saving my board!

@fixmypev

Ай бұрын

Awesome! Enjoy the ride and thanks for sharing the tip!

Bruhhhhh! so gratefull for this, the haptic buzz killer was taking away the last little slice of the available duty cycle! I can finally go downhill again with this bad boi

@fixmypev

Ай бұрын

That’s awesome! Ride safe out there. 🤙🏼⚡️💯

Fantastic!! Thank you SO much for sharing!! I have several homies here in Costa Rica who want to upgrade to a Quart battery and haven't been able to since the haptic buzz update 😓. The quart makes a HUGE difference for folks on group rides, as the OG Pint battery (especially on an older board) is a joke.

@bradonnewcomb960

7 күн бұрын

Hey I want to do the same thing but am weary about buying a quart without knowing it would work. Did you get it done?

@RidingWithMau

7 күн бұрын

@@bradonnewcomb960 Not yet 😅 No homies have taken the leap, I'm afraid. I'd recommend doing this process first, and if it does get rid of the haptic buzz and the firmware version has gone down, you'll know you can go grab that quart!

@bradonnewcomb960

5 күн бұрын

@@RidingWithMau thanks!

i never updated my pint but i'm glad there's a way to go back for the ppl that did move forward

@tylerartis3073

3 ай бұрын

also glad to see that rewheel still works in a way

@fixmypev

3 ай бұрын

It’s there if you ever need it! 💯

@fixmypev

3 ай бұрын

Definitely still working! (as well as it did until it got shut down)

Thanks for the knowledge my man!!

@fixmypev

3 ай бұрын

You’re welcome! Hope it helps. 🤙🏼⚡️💯

glad to be seeing this, Vesc is the way i'm going.

@johanjotun1647

Ай бұрын

Err not, by the time i added up what i needed to build it was going to be another 2 mpnths b4 i had the money, by then summervacation would be over, PintX it is hopfully we can un-nerf it

Amazing, now please please get an Xr down grade sorted! Updated by accident and now my cbxr isn’t working on the new upgrade. Gutted! Thanks for all your hard work in the community my friend 🙏

@fixmypev

14 күн бұрын

That would be amazing, but it’s unlikely to happen. Even after putting in a ton of effort to obtain backups from the various hardware models, we don’t have access to all of the firmware we need. Would be a sizable operation with little to no benefit. 🫤

@jakconnolly3412

14 күн бұрын

What do u suggest I do? Maybe stick a vesc focer 3 in it? Would that give me the full capacity back? Super gutted this has happened. Fm are really holding onto everything and it’s not fair.

@jakconnolly3412

14 күн бұрын

Just down graded the pint and converted to firm are to an xr for custom shaping. Amazing man. Thank you and really hope someone sorts out a patch for my now retired cbxr

@fixmypev

3 күн бұрын

@@jakconnolly3412 Yes. If you were to VESC the board, you would get full capacity back. Assuming the battery is healthy.

@fixmypev

3 күн бұрын

@@jakconnolly3412 Glad you were able to downgrade your Pint! ReWheel makes it pretty awesome.

Sick thanks man. Now the quart is an option once again!!! Unfortunately or fortunately i already ordered a Floatwheel but may still throw a quart in this pint so i can have a lightweight and a heavyweight board option....

@fixmypev

3 ай бұрын

The freedom to choose is a beautiful thing. 😉

@Jdb63

3 ай бұрын

Floatwheel Pint V drop in kit is coming out soon. Might be for you

@JustOutHereTinkering

3 ай бұрын

@Jdb63 cool I'll watch for that

@fixmypev

3 ай бұрын

@@Jdb63 Might be for many. ✊🏼⚡🛠

@Jdb63

3 ай бұрын

@@fixmypev I have a neglected XR I'm hoping gets the drop in treatment soon 🙏

🎉Now we need this for the XR

@fixmypev

3 ай бұрын

🤞🏼🤞🏼🤞🏼

@fixmypev

2 ай бұрын

Do you have an updated XR? If so, send me an email: www.fixmypev.com/contact-us

@andrewbruno630

Ай бұрын

@@fixmypevI sent you an email I definitely need my xr back

@lyriccccc.

21 күн бұрын

I have an updated XR. Should I send you an email? I would love to be able to revert back to a past update.

@fixmypev

21 күн бұрын

@@lyriccccc. Unfortunately, the XR is not able to be downgraded at this time.

Justin is the G.O.A.T.

@fixmypev

3 ай бұрын

🐐🐐🐐

Thanks for sharing dude.

@fixmypev

3 ай бұрын

You’re welcome! 🤙🏼⚡️🛠️

what do we do with the final step choices are dump the bootloader, dump settings or reboot? Then how do you bybass the app demanding to update?

just posted this on reddit but wanted to paste it here as well: I've had my pint since 2020. Once I got the knack of it I wanted more range. Didn't necessarily care about going much faster but range anxiety was real. A couple years later a friend of mine installed the chi quart battery along with a new Burris wheel from TFL and that changed everything for me. Fast forward a couple years later and OW came out with their haptic buzz update. I mistakenly installed it and had no clue that by doing so would basically mean my quart wasn't being fully recognized. Like so much that I started getting power surges in places I hadn't before. The same friend took my board, flashed the firmware (thanks ffmwheel!), and made it so that pushback doesn't occur until 20mph. I have always been a slower rider usually averaging around 11-12mph. Now I'm riding at 14-16 and I can't even begin to describe how this has increased my overall confidence in the board. It's a wonderful and freeing feeling that I never experienced early on and it rides leaps and bounds better now. At this point, I don't feel a huge rush anymore to upgrade to a bigger board because this one is serving me so well right now. Just wanted to share my thoughts and experiences with everyone...cheers!

@edgecombeexperience

Ай бұрын

Greetings i have a pint with a chi battery that i mistakenly upgraded and now its saying incompatible hardware, how did you get yours to work again ?

@MattKeithley

Ай бұрын

@@edgecombeexperience my buddy was able to downgrade the firmware using the tools in this video. good luck!

@fixmypev

Ай бұрын

That’s awesome! Love hearing stories like this from the community. 🤙🏼⚡️🖤

This is very helpful thanks for the video! So I have a few questions. Does the app show the accurate firmware it is now on? (My app says my firmware is a 5040 after I went through your "Onewheel Firmware Modification: Improve Performance of Your GT & Pint." Does this make my board compatible with 3rd party batteries now? (Quart's website says confirmed working with 5314/Gemini 5050). Lastly, what's a safe pushback value to set my pint at? Theoretically with a quart and stock battery? Thanks so much.

@fixmypev

3 ай бұрын

Yes, the app shows the accurate firmware. 5040 is correct so you can use an extended range battery. As for the top speed value, I generally don’t recommend exceeding the Pint X value (1462) on the Pint. It’s all about risk tolerance though.

Thanks! I didn't update my pintx so I'm good, but is there a way to prevent the black notification from showing in the fm app?

@fixmypev

3 ай бұрын

Personally, I just flip airplane mode on when first connecting to the board. Then, I can make any changes I need to make (lights, ride mode, etc) and then I minimize the app so it can run in the background since I like recording rides. Don’t forget to turn airplane mode off so you can still use your phone after. 😅

Thanks for the video. It went very quickly and included examples of rewheeljng and connecting to program that may it be necessary depending on the board? Can you post a step by step, in text, for pint and one for PintX, please? Including links and verbiage around what to do and where to click?

@fixmypev

2 ай бұрын

You’re welcome! And thanks for the feedback. For the Pint X, the only difference is that you jump straight to the ‘Flash’ tab instead of the ‘Backup’ tab. I’ve added a pinned comment with that info for now. If there’s enough demand for separate videos, I may look into that in the future. The highlight of the video is the unlocker tool. 🤙🏼⚡️🛠️

Will this allow me to see battery voltage in the app? I bought a used Pint with a quart battery. Updated the firmware when I brought it home. I just want to see voltage to estimate my range.

@fixmypev

2 ай бұрын

Sure will; along with a ton of other details. 🤙🏼⚡️💯

Thank you Bro ♥️

@fixmypev

3 ай бұрын

You’re welcome. Hope it helps! 🤙🏼⚡️🖤

Nice job! Idk about pushing 20mph on a Pint lol

@fixmypev

3 ай бұрын

Definitely not a good idea to go much faster than that with a stock battery. 🤣

hey where can i get the file. for flashing my pint x

My pint X was just updated to 5100. How would I go about turning it into a pint in order to then re wheel?

@fixmypev

3 ай бұрын

That process is an entirely different animal to take on. Requires disassembly, soldering, use of a Pint bootloader, and then ReWheel. We’re not able to demonstrate that process for legal reasons.

I put a quart in my brothers pint a few years ago and rewheeled it last year. Then he updated it to haptic buzz and now he's bricked. This will fix that? I can use my android?

@fixmypev

3 ай бұрын

Yes, as long as the board is 5314 hardware or lower. And you can use your Android phone, yes. Just have to be quick after the board is unlocked or you’ll have to restart the process. It’s easier on the computer.

Well, when I didn't update my pint x, can someone tell me how to check the battery level or change the driving mode without an update?

@fixmypev

3 ай бұрын

On iOS, use airplane mode or the Float Remote app. On Android, block data and wifi to the Onewheel app or use the OWCE app.

I have a pint with hardware 5326 can I still upgrade my battery to the quartz battery?

@fixmypev

3 ай бұрын

Gemini - 5326 is unsupported at this time. Unfortunately, that means the ChiBatterySystems Quart battery is not an option for your board.

mine isn't working for my pint it connects downloaded and everything but the light stays colorfull what do you do where it says the dump thing etc...

@fixmypev

Ай бұрын

Check out this video for more info: kzread.info/dash/bejne/gYhqucZwd5nOkbw.htmlsi=U9pqMSFdFwEwP2KV I try to have resources available for everything, but let me know if you have any additional questions.

Thanks bro ! The main reason I want to downgrading my pint is, to replace the battery to custom made one or Chi battery, whill this downgrading work with that battery plan?

@fixmypev

2 ай бұрын

You’re welcome. And yes. 👍🏼 You would use the unlocker tool and then use FFMWheel (ReWheel) to flash patched Gemini - 5040 firmware to the board. There are some settings designed to aid with the use of aftermarket batteries.

Thanks for the video. So helpful. Just bought a used board and was able to easily downgrade. One question : with XR spoofing on a Pint , does custom shaping work? Mine seems wonky.

@fixmypev

2 ай бұрын

It’s supposed to as long as you have enabled Custom Shaping via FFMWheel/ReWheel, but I haven’t done much testing with it. I’m happy with the base ride modes and I don’t spoof my boards. What seems wonky though?

@TheWasch24

2 ай бұрын

@@fixmypev I may have forgot to check custom shaping. I made a custom profile in the app to play with nose height and I didn’t feel any change.

@fixmypev

2 ай бұрын

@@TheWasch24 That's what it sounds like. Go through the process again if you haven't yet and it should work. Keep in mind, you'll need to redo the patches and then go straight to the 'Flash' tab since you won't be able to do a backup on a spoofed board.

If I don't have old Gemini 5076 firmware files for Pint X am I out of luck?

@fixmypev

3 ай бұрын

Yes, but it’s definitely out there. 🤙🏼⚡️🛠️

Tried downgrading then flashing, the update failed and now my board won't stop flashing yellow and blue.. have I hit the deep end or is there something I can do to fix the problem?

@fixmypev

2 ай бұрын

Confirmed you are running Gemini - 5326. Unfortunately, this tool is incompatible with that hardware version. 😞

How do i know what firmware i have . i have og green rail paint that has not been connected to app in awhile so no buzz but i did open app i really want to rewheel. this board is my sanity please help

@fixmypev

Ай бұрын

Sharing email reply for visibility: If you follow the beginning of my ReWheel video, it should show you which hardware and firmware versions you’re running (right after you connect). Click the link below and let me know if you have any questions: kzread.info/dash/bejne/gYhqucZwd5nOkbw.htmlsi=xn0GH7HzVyuG-vAp

I have pint hardware 5314 and firmware 5100, will this work?

@fixmypev

2 ай бұрын

Yessir! If you ever have any other models you’re curious about, check the video and description for known compatibility info. 🤙🏼⚡️🛠️

Will this help with being able to put a bigger battery in it?

@fixmypev

3 ай бұрын

On the OG Pint, absolutely. 💯

Thanks for the info. Can we get the same thing for the GT and the XR?

@fixmypev

3 ай бұрын

Would love to see those myself! Hoping for the best. 🤞🏼

@fixmypev

2 ай бұрын

Do you have an updated XR? If so, send me an email: www.fixmypev.com/contact-us

As a heads up even if it dose brick you might be able to fix it by opening the onewheel it will detect corrupt firmware and fix it

@fixmypev

3 ай бұрын

Unfortunately, that hasn’t worked for the people whose boards were bricked by trying this. Logical idea though. 💯

I did the update, but now my pint says it has firmware Gemini 65520 where do I go from here? Do I need to flash something for the re-wheel?

@fixmypev

Ай бұрын

Feel free to email me at www.fixmypev.com/contact-us and I’ll be happy to help you navigate your issue.

I was able to use the unlock tool, and flash the update, but now the process is hung after I click dump bootloader. It seems to get to 10-15% and then just gets stuck. I am able to reload the page and reflash the update (to 100% no problem), but everytime it gets stuck on bootloader dump. Any ideas to help, or should I be looking into VESC at this point :P -Pint -HW version 50xx (cant remember before I started, but pretty old) -SW version before this was 5100 After trying this out, the unlocker tool is reporting HW 5000 SW 65520. The unlocker tool now just says "This tool only works with pint pint x boards." Now that the rewheel tool can flash, I am not sure I need it anyhow. The rewheel tool also now has me select the board model before it begins the flash (from a dropdown list). When the extractor hangs, the LED's on the foot pad change to BRGBR. Any help would be greatly appreciated!

@fixmypev

Ай бұрын

Hey! Were you able to get this sorted out? If not, send me a message at www.fixmypev.com/contact-us and I’ll do what I can to help. 🤙🏼⚡️🛠️

Thanks for the video!! What value did you set your pint speed?

@fixmypev

3 ай бұрын

I had mine set to the maximum value for the Pint (2000) in the video, but I generally don’t recommend setting it higher than the Pint X level (1462) when using a stock battery.

@matttubbs8860

3 ай бұрын

@@fixmypev Ok cool, i do have the Quart battery upgrade

@fixmypev

3 ай бұрын

@@matttubbs8860 Nice! Still a decent benchmark. The general rule is 88.965 x MPH = Speed when pushback kicks in. The maximum value is not recommended as it virtually results in no pushback prior to nosedive speeds.

With this can we use extended battery packs like before

@fixmypev

3 ай бұрын

Yessir! Back in business. 💯

Hi! @fixmypev , tried this method, and 2 times in a row this tool corrupt firmware on Extract Bootloader step. Pint, 5314, gemini 5100. Any ideas why this could happen? In case I have such a problem , should I try to proceed withouth backup?

@fixmypev

14 күн бұрын

Addressing via email. 🤙🏼⚡️💯

Hello and thank you for this. Would anyone know if this works on a Pint X with 7314? Thanks!

@fixmypev

2 ай бұрын

You’re welcome. And yes. You can reference observed compatibility in the video description as well as within the video. 🤙🏼⚡️🛠️

NEED this for my GT. Update killed my WTF rails

@fixmypev

3 ай бұрын

Would be nice. 💯

Hi there, I tried it, everything looked good until it was the time to run the Firmware Backup again, it read Pint(5301)/Firmware 65520, clicked on Flash Extractor and got an Error. Ran the Unlocker again and got a Red message that says that "this only works with Pint/Pint X Boards". Board is flashing Blue and Yellow lights and the Firmware Backup (if Connect again) reads Pint(5000)/Firmware 65535. Please help. Thanks

@fixmypev

3 ай бұрын

If the lights are flashing now, feel free to move on to the ReWheel process. Link is in the description. If you need more assistance, send us an email at www.fixmypev.com/contact-us

@dioscarreyescabreja2102

Ай бұрын

I would like to know if you get the way to downgrade your onewheel because am at the same like you, please I would like to know how to do it, thanks!

@xrica38

Ай бұрын

@@dioscarreyescabreja2102I actually was able to reinstall the software through the application, thankfully the board is working again, NOT DOWNGRADED though, the method explained in the video may work for some others, not mine, and at this time, I am just going to leave it alone. Hope you can fix yours, it’s quite scary

@fixmypev

24 күн бұрын

@@dioscarreyescabreja2102 If you’re interested in my downgrade service, feel free to contact me here: www.fixmypev.com/contact-us

If I have firmware Gemini 5059 am I good to rewheel without downgrading software?

@fixmypev

2 ай бұрын

Yep! No need to downgrade first if you’re not running Gemini - 5100. kzread.info/dash/bejne/gYhqucZwd5nOkbw.html

@J0HNNYwaffles

2 ай бұрын

Thanks man! Rapid response and super helpful.

Hey FixMyPEV! I followed your instructions but got an error back from the unlocker tool. It says that my hardware is 5314 and firmware 5100 which should be fine according to your video but it says that by board isn't supported and continuing will likely lead to it getting bricked.

@Ultravioletwave

12 күн бұрын

Obviously that's pretty spooky but Is it telling me that making "rewheel mods" with the current firmware will brick it, or with that my pint is completely incompatible and even trying to downgrade to 5050 will brick it?

If i update again through the app, will it undo all the patches? If so, can i no longer use the app?

@fixmypev

2 ай бұрын

If you update through the app, it will overwrite (remove) the patches. You can use the Onewheel app either way, but if you’re running older firmware, it may ask you to update unless you use airplane mode or block data/wifi to the app.

Hey there , I was wondering if there is anyway to do this to the XR , I have a 4209 with a cbxr and that latest update screwed me taking the range from me 😢

@fixmypev

2 ай бұрын

Unfortunately, not. I’m not aware of anybody having figured this out for the XR yet.

@Traveling_Thomson

2 ай бұрын

@@fixmypev do you know if I went the vesc route maybe I could get it proper again? Hopefully someone figures roll back soon , FM really lame for this one :/

@fixmypev

2 ай бұрын

If you go the VESC route, the world is your oyster.

@Traveling_Thomson

2 ай бұрын

Just an update , did a range test from a green light 100 percent cbxr charge on my 4209 board. Got 27 miles before buzzes. Pretty good 👍

@fixmypev

2 ай бұрын

Since you have an updated XR, send me an email: www.fixmypev.com/contact-us

Thank you! Is something like this possible for the GT? If not today, in the future?

@fixmypev

3 ай бұрын

You’re welcome! And that’s an entirely different animal. But nothing’s impossible… 🤙🏼⚡️🛠️

@jonathanvalesa1598

Ай бұрын

@@fixmypev is it possible if you could make a video on how to do it or make a guide? I really want to get rewheel on my gt again.

@fixmypev

Ай бұрын

@@jonathanvalesa1598 I’m sorry. Make a video or guide on what exactly?

@jonathanvalesa1598

Ай бұрын

@@fixmypev on how to downgrade my firmware on a gt to an older one so i can install rewheel. like i have an ST-link and i need help installing it and then downgrading it so i can flash rewheel on it.

@fixmypev

Ай бұрын

@@jonathanvalesa1598 Not gonna happen, unfortunately. The DMCA prohibits sharing informations/tools that aid in the circumvention of technological copyright protection measures.

Does this reset the app odometer?

@fixmypev

Ай бұрын

No, it does not.

Hey my pint is 5314 on gemini 5100. I followed the process step by step but now my board says HW 5000 and FW 65520. The lights on my board are rainbow coloured. What do i do now? Cheers

@fixmypev

14 күн бұрын

Have you tried flashing the Gemini - 5040 firmware on the ‘Flash’ tab already? The file is accessible via the ‘RESOURCES’ tab.

@manpreetgidda6627

14 күн бұрын

@@fixmypev yup I went through your channel and found your video on that. It worked! Thanks a lot.🙏🏽

@fixmypev

3 күн бұрын

@@manpreetgidda6627 Awesome! You're welcome. 🤙🏼⚡🛠

my computer isn't picking up my onewheel on Bluetooth. I have the quart installed and every time i open the onewheel app it says incompatible hardware but i was able to get like 5 rides without any troubles before it shut off and now every time i turn the onewheel on, the light flashes red. Would that possibly be an issue if the light is flashing red and thats why im not seeing the onewheel on my computer?

@maxbojorquez663

2 ай бұрын

okay it shows up now to pair but it doesnt do it everytime. now ill start connecting and then it will take a sec then just go back to the connect button

@maxbojorquez663

2 ай бұрын

ok last thing I just checked the instructions and it says its now incompatible with Gemini 5100 meaning none of this will work now. damn 2 weeks late....

@fixmypev

2 ай бұрын

The flashing lights should not impact your ability to connect. Just make sure your phone (or any other device) isn’t connected to your board while you attempt to connect with the computer. And keep your board close to your computer.

@fixmypev

2 ай бұрын

This unlocker tool is specifically designed for use with Gemini - 5100. However, it is not compatible with hardware versions above 5314. Beta sure to review the description and the video multiple times if needed. All relevant info should be there. Happy to answer any additional questions you have: www.fixmypev.com/contact-us

@maxbojorquez663

2 ай бұрын

@@fixmypev ok awesome! thank you. i was able to do everything in the video but now i ran into another issue. i get a mix of white blue and yellow light flashing the motor isnt on or anything i can connect to the app but nothing is live. my firm and hardware are now gemini -65535 and 5000. My firmware and hardware before was gemini -5100 and 5314...

Once downgraded, wouldn’t we keep on getting the upgrade message from app again?

@fixmypev

3 ай бұрын

If you have 5314 hardware, no (because 5040 causes it to identify as 5312). Since 5312 isn’t a recognized hardware version, the update prompt never comes; as of now.

@weberito

3 ай бұрын

I made mine present itself as an XR to remove that update message

@fixmypev

3 ай бұрын

@@weberito That's another way to do it. 👍🏼

I followed the video and my pint turned into a rainbow color. what do i do? I followed your video exactly and now it's saying im on firmware 65535 and HW 5000? EDIT: I went through the entire rewheel process and it worked!

@fixmypev

3 ай бұрын

It sounds like you may have initially been stuck in the extractor mode. Glad it worked out for you!

@Cybercomet333

3 ай бұрын

I think you pressed the Reboot button after the firmware finished flashing (at least that's what I did). The video kind of glosses this part (around the 8 minute mark), so I wasn't entirely sure what to do. I think the correct answer is nothing. The board is good to go at this point. Thanks for posting this though! I started freaking out and then saw your comment. Once I followed the whole Rewheel guide, everything was good to go!

@fixmypev

3 ай бұрын

​@@Cybercomet333 Glad you got it handled! In this video, I wanted to focus solely on the unlocking aspect because I already have a ReWheel video, but I plugged that one as well (2:17, 9:44, Video Description). Enjoy the freedom! 🤙🏼⚡💯

I wiah i still had the app for my xr but the haptic shit can buzz off

@fixmypev

3 ай бұрын

Airplane mode is what I use any time I want to open the app. Otherwise, I keep it connected, but minimized to avoid the ‘UPDATE’ popup.

So basically if you get the newest Pint X with Haptic buzz, there'll never be a way to mod it?

@fixmypev

2 ай бұрын

Depends on the hardware version. If it’s above 7326, potentially not. 😬

@leezeylee323

Ай бұрын

@@fixmypev so can you do this if the pint x is at 7326?

@fixmypev

Ай бұрын

@@leezeylee323 Correct. It just hasn’t been tested above 7326.

Does this downgrade process work for GT?

@Nick-xs9zu

10 күн бұрын

please i want to know to im stuck in 6153

So if my board is exactly 5314 can i do this?

@kyleturner4695

3 ай бұрын

Mine is to. Just finished . Works great

@dannyd2798

3 ай бұрын

I also just did this and my board is 5314. No issues at all!

@fixmypev

3 ай бұрын

Correct. 💯

@A_Very_Spuky_Channel

3 ай бұрын

@fixmypev Hey, I just got done with it. It worked flawlessly with rewheel. Appreciate it a lot!

@fixmypev

3 ай бұрын

@@A_Very_Spuky_Channel Awesome! Enjoy the freedom! 🙌🏼

Fm isnt going to patch this next week are they?

@fixmypev

3 ай бұрын

They can’t patch old firmware. So, as long as you don’t update your firmware to an unsupported version, you’re good.

@NeedNot

3 ай бұрын

@@fixmypev ofc but would be nice if this was always something that could be accessed. Probably not since we cant have nice things. Also why do you think new pints cant use it? You said the bootloader is different but why wouldnt they apply the same changes to the OTA update

@fixmypev

3 ай бұрын

@@NeedNot It ultimately is something that can always be accessed; provided that you download the offline files and don't update the Pint you're riding to an unsupported firmware version down the road (FM can patch future firmware updates to block this, but can't force you to update). And new Pints can't use it because Future Motion designed the bootloaders differently. The reason why they wouldn't apply the same changes is only known by them. When you do a firmware update, the bootloader isn't usually impacted. However, it was with some of the XRs updating to the haptic buzz firmware (Gemini - 4165). So, we can't put anything past FM at this point...

On the OG pint, I cannot pass dumping bootloader. Board have been downgraded and when I try to dump bootloader it is stuck on random values from 9 to 17% :( I think now its just bricked xD

@fixmypev

2 ай бұрын

It’s unlikely that it’s permanently bricked. If you still need help, feel free to send an email at www.fixmypev.com/contact-us.

@Skarodwex

2 ай бұрын

@@fixmypev Thanks for reply! After numerous tries, I have made it and dumbed bootloader. Thanks for your great guides!

@fixmypev

2 ай бұрын

@@Skarodwex You’re welcome! Glad you got it. 🤙🏼⚡️💯

@viper0tz

15 күн бұрын

@@Skarodwex hi! can you please describe how you retried this process to dump bootloader and how much tries you needed? :) I tried 2 times, was scaried because it makes boards firmware corrupted, each time I got to official app to restore Gemini 5100. And Extract bootloader then hang again on 5-10%.

@Skarodwex

15 күн бұрын

@@viper0tz To be honest I was just trying. Also thought that the board is bricked and that's the end but after some time the bootloader just passed. Do not worry about bricking it, if the red light flashes, just restart the board and try again ;D

So I can custom shape my pint x for wtf rails???

@fixmypev

2 ай бұрын

You can level your rails, yes. It’s not custom shaping though. Just an IMU calibration via the Onewheel’s factory mode.

@malikabarker1098

2 ай бұрын

Just so I have this straight. Once I've down graded..I'll have the ability to use nrf to re-level??

@fixmypev

2 ай бұрын

Correct. nRF Connect, OWDT, etc.

> has not been tested on Pint X hardware versions above 7323. unlocker has been developed on a 7326 board.

@fixmypev

2 ай бұрын

Updated. Thanks. 🤙🏼⚡️🛠️

What about xr board riders?? 😢

@fixmypev

24 күн бұрын

There are no downgrade options for the Onewheel XR at this time.

¿¿My Hardware is 5315 so im basically fucked right ?? Got the Onewheel months before the haptic buzz

@fixmypev

Ай бұрын

This process has not been tested with 5315 hardware as far as I know. As a result, I am unable to advise on whether or not there is risk involved. If you’re willing to experiment (there is a risk of bricking your board) feel free to email me at www.fixmypev.com/contact-us.

ReWheeling a pint X is possible. Just have to load pint firmware on it, relatively long and complicated method but indeed possible.

@fixmypev

3 ай бұрын

Yessir. Have to turn it into a Pint first. 🤣 How’s your Pint X running by the way?

@jordanwilliams618

3 ай бұрын

Curious about this. My pint X was just updated to 5100. How would I go about turning it into a pint in order to then re wheel?

@fixmypev

2 ай бұрын

@@jordanwilliams618 That's an entirely different (and extremely involved) can of worms. 🪱

mine wont get past the connect stage and I get an error that says GATT Server is disconnected. Cannot retrieve services. (Re)connect first with `device.gatt.connect`.

@fixmypev

3 ай бұрын

If you’re still having trouble, send me a message at www.fixmypev.com/contact-us.

@RatKitesurfer

3 ай бұрын

Hi, I also got this error message when trying to connect with a desktop PC (Windows 11). I am not sure of the cause, but when I tried with a laptop (Windows 10) it connected correctly. The unlocker then "worked", but unfortunately I still can't backup the firmware yet...

@RatKitesurfer

3 ай бұрын

I managed to backup the firmware etc. The trick (I found) as mentioned in the video is to be super quick between patching and "retry" backup.

@fixmypev

2 ай бұрын

@@RatKitesurfer I've had trouble with Windows 11 as well. Not 100% sure why, but it has worked for me on Mac OS (Sanoma 14.4.1) too.

@fixmypev

2 ай бұрын

@@RatKitesurfer Awesome! Glad you got it. It times out quickly.

Will this work with pint x hardware version 7326

@fixmypev

Ай бұрын

Yes. Per the video description: "has not been tested on Pint X hardware versions above 7326." 7326 is ok.