Door Sign Tutorial
Comment below with any questions!
Shop my website. teachovertherainbow.com/
Use my discount codes and affiliate links teachovertherainbow.com/disco...
Shop my Amazon Storefront: www.amazon.com/shop/teachover...
Amazon products used in this tutorial: www.amazon.com/shop/teachover...
Woodpeckers Crafts: woodpeckerscrafts.com/?rfsn=7...
Product Used: 12" Circle Wooden Cutout, 1/4" Thick
Peachy Olive Glitters use code: 10rainbow for 10% off
Affiliate Link: peachyoliveglitters.com/?sca_...
Products used: Black- combo of Batman and .357 Magnum, Brown- Ophelia, Yellow- Diggory, Silver- .357 Magnum, Pink- Wednesdays
Counter Culture DIY use code: overtherainbow24 for 10% off
Affiliate Link: counterculturediy.com/?ref=84
Products Used: UV Resin, Fast Set, Fast Set Turbo (only use this once proficient with spreading)
ColorShot Spray Paint Link: www.mycolorshot.com/
Product Used: Blackout, Skinny Dip, Emoji, Let's Get Cozy, Farmer's Daughter
Heat Transfer Warehouse Link: www.heattransferwarehouse.com/
Products Used: Siser EasyPSV Glitter Colors: Diamond, Glimmering Gold, Night Sky
Hobby Lobby Pencil Ribbon: www.hobbylobby.com/Fabric-Sew...
Michaels Arts & Crafts Tulle: www.michaels.com/product/1038...
Пікірлер: 98
This is the most wonderful tutorial!! I made several and they sold out immediately! Thank you for your assistance!! ❤
@msdh2000
3 ай бұрын
What did you sell yours for?
Thanks again Brook!! Can u make a tutorial for the wireless mice and sticky note holders you make as well!! It would be greatly appreciated from one teacher crafter to another ❤
@TeachOvertheRainbow
9 ай бұрын
There is one for the note dispenser ☺️
Brooke Your work is flawless & amazing. I love you. You're one of the few crafters I follow & be floored by the work you put out.
@TeachOvertheRainbow
3 ай бұрын
Thank you so much!
@foxxybrown8231
3 ай бұрын
Good morning Brooke I don't have a cricut, for the trim What else can I use and the size
Off Topic, but love your hair! 😁 Thank you so much for sharing your techniques and knowledge.
Love it!!!
Thank for sharing! Great technique and easy to follow steps. Now I can have something to do experiment with.
Thanks so much for this tutorial! I just finished mine and I love the way it came out! I didn't realize until I rewatched that I used the same font.😂🎉❤
@natashamerriweather8838
13 күн бұрын
Hi, what font are you guys using
So Cute!
Love it!!! Thanks for sharing!
Awesome love it❤❤❤❤
Thank you I love watching your videos!
Thank you!
Thank you. Awesome as always
Thank you for sharing ❤
Thank you I love watching you on tik tok and have been wanting to make these!
@TeachOvertheRainbow
10 ай бұрын
Thanks for following along! ❤
Thanks for sharing, will definitely try this
U did a very beautiful job !💜
Love the tutorial ❤. You do awesome beautiful work 👏
Omg this is so stinkin cute ☺️
Thank you so much for sharing!!! I absolutely love your work…😊
Thank you so much for this video! I follow you on all social media! Your work is awesome! Thank you!
I just love you! God bless you.
Great video perfectly explained. Thank you
Love this ❤ will you do the stapler and clipboard tutorials as well?
Thank you so much for sharing! You are awesome! God bless you.
Would love to see a video of how you make the mouse
So cute!!! I always love how efficient you are.
@TeachOvertheRainbow
10 ай бұрын
Thank you! 😊
Beautiful 😍
@TeachOvertheRainbow
10 ай бұрын
Thank you! 😊
So pretty 🤩
@TeachOvertheRainbow
10 ай бұрын
Thank you!!
What measurements do you use for the zig zag? Or can u send me the zig zag template?
Can you make a tutorial on the notebook door sign you have....PLZ
Amei, obrigada por compartilhar
I watched twice. When did she give the trim measurements?
@TeachOvertheRainbow
10 ай бұрын
.15
@Showbiz559
9 ай бұрын
I don’t see it . I’m think she means the zig zag
You are so talented! I love seeing your crafts hope you make more❤ what size are the gold and black trim?
@TeachOvertheRainbow
10 ай бұрын
.15
Do you use a mask when you do the UV Resin? Thank you so much for doing this video 💖
Thank you for sharing, I am in the process of making one for my grandsons teacher, watching step by step of your tutorial. Can you tell me what font you used for the name please?
I so much appreciate this tutorial!!! Thank you. May I ask for a range of a selling price? Blessings. Barb
@TeachOvertheRainbow
10 ай бұрын
It really depends on your customers and what they are use to spending with you. I wouldn’t do anything less than $45. Also if you have a high quality product you can charge more
What measurements for strips?
Thank you so much for sharing this - your work is fantastic!!! Question, can you share what zigzag svg you use? I can't find one that is one-sided with the bottom filled in. I'm sure I'm just searching wrong but on the struggle bus with it!
@TeachOvertheRainbow
5 ай бұрын
I honestly don’t remember which one I use. I just found on probably on creative Fabrica
Hi what are the measurements for the strips?
Is there somewhere to see the dimensions of the lines you use?
I love that font! Could you share the name please?
@TeachOvertheRainbow
5 ай бұрын
Annie Lue on cricut
@danaardiel4421
2 ай бұрын
@@TeachOvertheRainbow dont see that font on design space anymore too bad.
Ty so much. How do I make the line cuts? Please
@TeachOvertheRainbow
10 ай бұрын
With a vinyl cutting machine. .16x11.5
@MsBklynqween
9 ай бұрын
@@TeachOvertheRainbow thank you so so much ❤️
Looking to make this for my daughter’s teachers. However I can’t work with epoxy. Is there a way to do this with just using the uv resin and cure it under light. Thank you for this. Love all your videos
@TeachOvertheRainbow
4 ай бұрын
Refer to min 4:52
@jenniferleboeuf3241
4 ай бұрын
@@TeachOvertheRainbowperfect so I don’t have to use epoxy at all and it will still be smooth
How many Def Leppard shirts do you own? 😂 They were my first concert at 10 years old 🤣
@TeachOvertheRainbow
5 ай бұрын
A lot lol I went to one too
Is it not smooth enough after the uv coats to put the stripes and name on. Then epoxy over it?
@TeachOvertheRainbow
10 ай бұрын
There only needs to be one coat of epoxy. It’s a door sign that’s not handled and won’t be out in the weather you don’t need to put another coat of epoxy on over the vinyl. You will need to do a coat of epoxy first before your vinyl even if you use the uv resin option to adhere your glitter because it won’t be smooth enough to just rock with it like that.
can i seal the last part with uv resin or do i have to use epoxy???
@TeachOvertheRainbow
5 ай бұрын
You can but that’s a lot of uv resin.
Did you use removable vinyl for the zig zag?
@TeachOvertheRainbow
5 ай бұрын
Yes
@msdh2000
Ай бұрын
@@TeachOvertheRainbowMay I ask what the measurements for the strips and zigzags?
I tried to make this .. when I used the uv resin it kind of came out chunky what am I doing wrong?
Could a blower dryer replace the torch?
@TeachOvertheRainbow
9 ай бұрын
No, it causing to much air. It’s the heat you need not air
@IslaNoordAhmed
7 ай бұрын
What about the heat gun
Ugh my walmart stopped selling colorshot for some reason...Im so mad about it too. I was building my collection. I wish I knew why...Does anyone on here know?
So the trim lines are .15??
@TeachOvertheRainbow
9 ай бұрын
Yes
How did u make the zig zag
@TeachOvertheRainbow
10 ай бұрын
You can get any pencil SVG on Etsy, only use the zig zag portion. And resize it.
Hat about the backside? Do you just leave it wood?
@TeachOvertheRainbow
10 ай бұрын
Yea it’s a door sign and the back won’t be seen. I have on the description on my website state that the back is unfinished.
Is the zig zag vinyl? Like its cut eith your cricut?
@TeachOvertheRainbow
10 ай бұрын
Yes
@rachelhernandez5869
10 ай бұрын
@@TeachOvertheRainbow What are the measurements used to cut your Zig Zag?
are you using permanent or removable vinyl for the zigzag? My zigzag lifted when I spray painted 😫😭
@shelleecorwin3780
7 ай бұрын
Hello! I'm hoping you can help me with the zigzag SVG - can you share what you used? I can find svg's but they are double sided, not only 1 side with the straight bottom. I'm probably just searching wrong LOL! Appreciate any input you wouldn't mind giving.
@TeachOvertheRainbow
5 ай бұрын
No it’s not permanent you have to press it really hard and after you spray it may lift just push it back down
Hi , do you have link for the UV Resin ?
@TeachOvertheRainbow
10 ай бұрын
Yes it’s in the description
@nemillekreations
10 ай бұрын
Ok I come to see Thank you
Are you glittering the sides too or just painting?
@TeachOvertheRainbow
9 ай бұрын
I do exactly what I show in the tutorial. ❤
@MrGuyOnTheFly
3 күн бұрын
@@TeachOvertheRainbowhey are you glittering the sides to or just painting ?
Hobby lobby doesn’t have pencil ribbon
@TeachOvertheRainbow
2 ай бұрын
Yes they do I just bought it a few days ago.