Great to hear your update that the truck is NOT a Kenworthless. Enjoy how farmers barter and rent equipment. Managing your cash is king 👍👍👍

Your mack is sure treating you well. Keep up the great work

Chris that was great cut spray corn rake help neighbor move bales cant wait

Excellent videos, glad to see you are doing good!!!👍👍👍

Great to see the barter system still works I done that abit for stuff I need sometimes

Keep up the great work Chris and good luck on the Kenworth.

Love the dog. Thanks.

I used to have a "Pizza and Beer" party with back pack sprayers and worked on those bull thistles with Roundup, you gotta get them or they spread and will make the hay unsellable because of damage to mouths of livestock takes a couple of years I had a quad with sprayer eventually and did it myself but those thistles are like bombs to value of hay

Bacon,porkchop,n ribs,n pork roast !! N Sausage!! He'll yes!! Dey look good!!

Great channel man. And a great dog!🤙🤙

The piggys Burt and Ernie!!!!

So if you water every evening after sundown and twice a week water with miracle grow you will have the most amazing garden. I can tell you from experience. And you might as well have mown that little bit of corn by the time you get the crop off the field that corn will be done for anyway.

As far as Pig names go I think I would take a page from my sons book on naming. My sons had show chickens and names were like.. ( chicken ) with rice and ( chicken ) And Dumplings, so for Pigs try ( pork ) fried rice and ( pigs ) in a blanket. I think you get the idea.😅

Hey Chris , nice addition with the pigs , you should put up a fan mounted to the ceiling for the pigs, I am sure they would love it . I know you have a huge list of chores added to your daily jobs ! Thanks for sharing videos, I look forward to them evey day, your one of the farming channels that puts out a video just dang near every day , thanks man 🇺🇲🚜

Nice video

Cool 😎

🚜🌾

Perfect goat hey

hey, I know that Fair ground! Name them Pork & Beans!! I don't care what the weather man says, the sky looks like rain! When you see them "mares' tails" moving in, it's a sign! (white whippy thin clouds)

If a dog gets sprayed by a skunk we wash them in tomato juice and it helps take the smell out of there hair and skin and let it soak in them for 10 minutes and then use dog shampoo to wash it all off!!! Hopefully he didn’t get sprayed. Great videos lately

@guydaubenspeck9206

16 күн бұрын

Three-way mix Dawn dish soap tomato juice hydrogen peroxide

Duffy if you bush hog your pasters it will grow back better with less weeds not trying to tell you how to run your farm just trying to help you glad to hear about the Cummins and getting back together and a good video

Yep heard that one too

You never talked about the White on the Mower/Conditioner...

That hay would make some pretty good hay for feed lots to grind for filler and still get some good feed value out of it

So if I gotta a cool w900 for sale that needs a motor sell it to you got it! Haha

If Yanco does get sprayed... give him a bath in summer's eve...

@burtonbird5518

16 күн бұрын

With lemon

Sheep, you need sheep not cattle. Sheep are good for the land, leave out al year no poaching and lamb chops on the BBQ 🐑

My m 11 cummins is going in for some injectors on tuesday. Hope parts are easy to find. My garage has to call more than one source a lot of times. My freightliner dealer has been good for parts so far.

Hate to say you would have been better off to get a reman N14 or Detroit 60 series factory 500 hp than putting all that money into a Big Cam. Hopefully it works out for you.

@Otherrandomguy42

16 күн бұрын

I tried to tell him when the Big cam blew up to dump it and get A 60 Series Detroit. I've got two of those old big Cams a 350 and 400 laying out behind the garage both pulled out when shit the bed and put in 3406 Cats

@williamspates1015

16 күн бұрын

@@Otherrandomguy42 he definitely would have been further ahead we have had Detroit 60 series go over 800K nothing but routine maintenance. Hopefully they build it Duffy proof lol or it will be just like his Duramax always working on it.

Arnold and Fred Ziffel would be good names

@williamspates1015

16 күн бұрын

He is kinda like Green Acres lol

How come you don’t pull that rake home with your truck and use your tractors or help out a little bit with your tractors with them guys that’s a fair trade

@DuffyAg

16 күн бұрын

Because the tractor was attached to the rake and had to go there...

Hello Chris not to keen on the fast forward music but thats my opinion. Have a good day.

I hate People when they dont remember stuff from day before. I had Same expiriance when I called for loader. We have loader tractor but its jerryriged to work. We have newer feed tractor it dosent do anything only feeding and i finded loader for it but guy didnt remember me even

I see in the new Tractor House, that the big jd dealer in Missouri/Illinois, S/N deere. Sydenstricker/Nobbe, now has 9 locations in New York state

@burtzorn4059

16 күн бұрын

The old Cass Equipment. Deere forced them to sell.

@Otherrandomguy42

16 күн бұрын

Bought out Cazenovia Equipment

You could get a 3 point boom for your 4640

@DuffyAg

16 күн бұрын

I agree and was looking for one. And one just came up for sale

Is there anything you can spray on the grass weed to make it better quality feed, or would you have to plow it and regrow grass? If you could answer in a future video I would appreciate it because I don't get notifications for comments or reponses. Thanks Chris

Would you mind proving me some details of the tractor show in August. I believe you called it the Rennecker ??

@nailbender7223

16 күн бұрын

Renner stock farms I believe. Some where in Belleville, IL

Piggly and Wiggly for the pigs names.

U guys should talk to Tim Gentry from Gentry and sons trucking

@codyfoster7981

16 күн бұрын

They want their trucks dependable not "turned up" unreliable junk

Mutt and Jeff old school twins

Get 3 or 4 goats, they will run with cows. They won't eat the grass, but will eat all rhe weeds .

I'm surprised you don't have your dump trailer running to haul sand away from the farms I wonder if that would work make some extra money just a question

Surprised you don't just take the gras to a mushroom barn, unless you don't have one close

I have a good name for the pigs Bert and ernie😅

The guys that reach out and ask for a deal. Then forget about was discussed are not worth the powder to blow em to help. Walk away. Next year? NOPE!

I don’t think you’d like a self propelled sprayer in your hills. Higher center of gravity. It might get wild. I know I do t like little hills with 132ft boom and 1600 gallon tank.

@DuffyAg

16 күн бұрын

60 foot rogator would do just fine tho

@peteparker7396

16 күн бұрын

@@DuffyAg I know why you want one. Pull behind runs over your corn sometimes I’m guessing? Rotators are good sprayers, I’ve had a couple. Still, that higher center of gravity and water sloshing might be fun on your hills if they are as steep as they look. All you can do is try it and see. If you can, I’d get one with the height sense on the boom or put it on an aftermarket.

@williamspates1015

16 күн бұрын

@@peteparker7396 we run a Prowler with 60/90 booms on so e real steep ground it does fine. My uncle runs a Apache same size booms does fine just gotta drive with some sense.

Hay Chris don't listen to the Cummins hatters a big cam will walk all over a Detroit iny day of the week i personal know.

@codyfoster7981

16 күн бұрын

Not to mention those $2500 computers that just die

@williamspates1015

16 күн бұрын

@@codyfoster7981 never had much of any ECM failure on Detroit 60 series they are about most bullet proof electronic engine ever built E7 Mack is the most bullet proof in my opinion 3406E real close ISX Cummins are junk and I work on fleet of them everyday junk.

@williamspates1015

16 күн бұрын

@@jasonreese4824 Been working on Cummins for years 855 through ISX. Right on Cummins manual it was recommended to replace bearings every 250-300k miles on a Big Cam to try to make them last and they still rarely made it past 800k without melting piston breaking cranks electrolysis on liner. CAT 3406B much better reliable engine N14 more reliable Detroit 60 series definitely a lot more reliable. For what he has spent could have upgraded to better engine.

@Otherrandomguy42

16 күн бұрын

I'm far from a Cummins hater I think the n14 ( especially the red top celect) and ISX Cummins are pretty good engines the problem with the big cam is just like he some said parts are obsolete. 😂😂 Really not a lot of logic and dump in 25 or $30,000 to do an engine overhaul in an old big cam. And your big cams not going to walk over any Detroit engine when it's sitting waiting for parts for 8 or 10 months is it that's the point he rebuilt an obsolete engine. So say 5 years time something could go wrong and the truck could sit around and wait for parts again for another year😂😂. And for all he's ever going to do with that truck an old 60 series has lots of power to get him through. The only reason I recommend the 60 series Detroit is because it's far and away the cheapest engine he could buy to put in that truck. Ideally an n14 Red top select Cummins. But that with paperwork to prove it at an engine overhaul say a couple hundred thousand miles ago it's going to be $20 or $25000 minimum. I mean sure you can take a chance and buy one that doesn't have any paperwork to prove an engine overhaul but then if it needs one, there's another $40,000 bill cuz that's around what it cost to overhaul a red top select right now.

@Otherrandomguy42

16 күн бұрын

​​@@codyfoster7981😂😂. You in here crybaby being like your ECM failure in a Detroit 60 series is the norm that would be the very rare exception. I got a buddy that runs a bunch of trucks. We only have two here on the farm old international eagles that we now have cat engines in both of them. But I have a buddy who's in the trucking business he is somewhere between 15 and 20 trucks. And the engine that has made him more money than any other was Detroit 60 series built from 1990 to 2000. He keeps track of the cost of repairs on every single engine in every truck every year. His favorite engine is a Cat 3406 6nz but Chris sure can't afford one of those right now coming out of an old truck somewhere that's got paperwork to prove it was rebuilt a couple hundred thousand miles ago. Cuz you're going to pay about $40,000 for it. And if it doesn't have paperwork to prove a rebuild you don't touch it because if you have to do a rebuild after you bought it that's about $50 to 55,000 right now.

Ok yet again KZread unsubscribed me again. This is the second time in 2 months I have found I was unsubscribed. I like and comment on almost every video. I don’t know what KZread’s problem is but it’s getting on my last nerve. How can you grow your channel if KZread keeps kicking your subs?????? Please let people know to check there subscription. You have to remind the viewers to check.

@waynejones5239

16 күн бұрын

U tube does it every once in a while

Skunk smell could be someone smoking cannabis

Was always told not to name your food.

Wait. It’s July and I can see your breath? Look @ 2:11. Surely it’s not that cold?

@stinkydog5935

16 күн бұрын

thats dope smoke

You call those kind of people game players when they don't know what they want to do

joe and donald piggies

Name the piggies Hamton and Pigsly

sounds like someone sold you a truck knowing all your viewers would get really stressed because we will have to wait ages till we see you driving it again HAHAHA... Cant wait till we see you driving the rig longhaul

What happened to yr friend Robert, never hear you talk about him anymore since he let you down on trucking

@DuffyAg

16 күн бұрын

He bought a Harley and went Mia for many of the friends. We see him from time to time

@stubarry3206

16 күн бұрын

@@DuffyAg thanks Chris, at least u know he’s safe and around 👍👍

Very that sound little faster shake the hell out of it man out a way to take care of somebody else’s equipment

"Prahdict"?????????????????

Where’s Jared moorman

I tried to tell you not to waste your money on an old 400 big cam because they're an obsolete engine but you wouldn't listen. Could have grabbed a late 90s 60 series Detroit with paperwork to prove a rebuild say 200,000 +/- mile's ago for $10k dropped it in and had the truck back a month after it went down.

@brianocallaghan7716

16 күн бұрын

Youre awesome

@codyfoster7981

16 күн бұрын

😂😂😂😂😂😂😂😂😂 this is the funniest CRAP I ever read. 2 $2500 computers 6months and 3 incompetent pricks later and a 60series that had intermittent no start issue was finally fixed.

@williamspates1015

16 күн бұрын

​@@codyfoster7981Guarantee he got more money in machi e work in that Big Cam block then everything you just listed to have at best a 500k mile engine till it blows again. This is coming from a Cummins mechanic. He should have at least upgraded to a N14 or CAT 3406B and had reliable 1 million mile engine

@waynejones5239

16 күн бұрын

It's his choice ​@@williamspates1015

@markbowling3475

16 күн бұрын

Why would you presume to tell another man how to spend his money, sharing your opinion is one thing but telling Duffy he is not to you is BS