Excellent episode Dan and Christy. It's always great to have John on the show. Keep up the excellent work. Safe skies my friends 🇺🇸🛩️

I helped my dad build his plane. I am in the process of totally restoring it right now. I have another builders copy of the same plane. In spite of my experience with the type, I can’t believe how much I learned about that particular plane by doing an owner assisted condition inspection (E-AB version of an annual). it’s really eye-opening about what you can learn about a plane when you do the owner assist. I’m so happy that my AP - AI allowed the owner assist!

I really like this guy. I can totally relate.

The shop supervisor in the AE (Electrical Shop) when I was with VQ-1 (Fleet Air Reconnaissance) in the Navy had a standard answer. If we are missing a tool we ain’t going home until 2500, and by damn that’s late. Naval Aviation positive tool control is no joke! No one leaves until that tool is found.

@dustinalexander4620

9 күн бұрын

As a AM, yes. You aren't going home if anything is missing. TAF is freedom. Total Accounted For.

Thankfully I built my own Glasair Experimental & got the A/P license from the FAA to do my own annual condition inspection.

@TakingOff

9 күн бұрын

I’ve heard that your plane is a sweet ride.

This reinforces the A&P classes I had to take for my pilot degree in college.

It’s my airplane with my life on the line especially with aerobatic aircraft. I want to check everything. My local airport will not allow owner assisted annuals. You can’t even be in their hangar while they work on your airplane. It’s crazy. That’s why you build your own Experimental airplane and give up on certified aircraft. Experimental airplanes only need an A&P not an IA for a condition inspection. Dan & Christy should build an Experimental airplane. It would completely change their outlook on aircraft.

The number one thing that would help all aircraft maintenance!.....Make the engineers work on their designs. I own a Bonanza and had to replace the master cylinders which are under the rudder pedals and under the floor. It took me over a week (mainly to go to my chiropractor between sessions), I had to remove the center console to lay on the floor on the right side to reach over with one hand to install one cotter pin (I am a BIG guy). Before I would get in there I put my cell phone in my pocket so if I got stuck I could call for help...seriously. I was then shown some pictures from the Beech factory of the brakes being installed by a guy sitting on a stool and reaching in through the side of the frame...and then another guy comes along and rivets the skin on. These planes were built like no one would ever have to work on them. I just had to replace the electric boost pump and fuel selector...again to access the units I had to cut, grind, bend several wrenches just to remove and then replace the fittings and fuel lines due to the location. Maintenance is a young person's game.

Completed an owner assist on our Warrior 151 last fall. Total of 12hrs disassembly and reassembly, but I'm extremely mechanically inclined. Luckily the airplane is very low hours so no squawks at all and no AD issues. Hoping for the same this fall. We did find a flash light in the belly though, who knows when that happened years back!

You were talking about the possibility of a mechanic leaving a tool inside the aircraft. In the mid-nineteen sixties, I was an electronics mech on the F-105. I do not remember what I was doing but it involved reaching down behind the instrument panel. While reaching back there I kept feeling something loose. When I finally got it out it was a wrench someone had left back there and had not reported it because it would have required that the aircraft be grounded until the dropped wrench was found and removed. I took that wrench and put it in the toolbox in my car. One day, as I left the base, the Air Police were searching for government property. Of course,they found that wrench with USAF etched into it. When he showed me what he had found, he said that he would need to write me up and I was adamant that that wrench was mine. When I told him how I came to have that wrench he tossed it back into my toolbox, closed the trunk, and sent me on my way.

@TakingOff

8 күн бұрын

Wow, great story.

Interesting topic and interview. Thanks and looking good Christy!

First couple flights out of annual are always my most nerve wracking flights. Never know what may have got left partially done and ready to blow or lock up

Hey Dan, I don't guess you had the cameras rolling when you got stuck in your own airplane did you? That would be hilarious to see. 😊 So glad it was not something more major that came lose during that flight.

@TakingOff

8 күн бұрын

OMG, no! Thank goodness, LOL. The only witness was Chewy who wanted out more than me.

Now that he’s not rigging, who does he recommend? I’d love to get my classic 182 rigged

@cessnarigging

4 күн бұрын

Actually still doing rigging, pre-buys and limited Annuals-maintenance. Just slowing things down. Unable to maintain the full load of 30+ Aircraft like I did with staff.

@hpijeep

4 күн бұрын

@@cessnarigging I tried getting on your schedule. I’ll call Monday and try again. Thank you for the reply!

I know of a ATP pilot who flew a Navajo for a local company and I never saw any landing he did that wasn't a greaser. He went in upside down into Mobile Bay many years ago due jammed controls from a screwdriver left in the wing.

It would take a book to explain the details in tool control for USAF aircraft maintenance. A lost tool means shutting down the flightline, missions of the highest national priority delayed.

I thought it was "Shaffer" not "Wong"

@TakingOff

9 күн бұрын

Recorded in studio before she decided to switch.

@jeremylauer5234

9 күн бұрын

@@TakingOff gotcha, I think its also great for owners to learn all about their airplane and owner assist is the best way, as long as the A&P allows it.

Dan, When I worked for Japan Airlines Cargo, back in the 70s we NEVER put our names on our tools. Just marks that we would know, in case someone left a tool in an awkward place!

Owner assisted annual should be encouraged..at least once if you own the aircraft. These GA aircraft are generally very simple machines (that require precision care), and it's a sin to not know as much as you can about the little tin can you're up in the air with. I expect that if i slow the process down that I'm paying the tech for that extra time..would never ask a pro for free labor.

Most owners will just slow them down, having to redo or closely inspect your work.

Screws.... So many screws

@TakingOff

9 күн бұрын

Exactly!

Christopher Ottawa Canada have done 80% of most of the annual work on all the last 8 I craft that I have owned remove all inspection panels, change get oil, compression check, clean and test spark plugs, get all paper work organized ready for Awds, it would take me 2 days work single engine 3 days for twin include gear swing AC ready on Jacks the mechanic would spend about 1 day providing no major snags last AC was a piper 600A non turbo aerator with io540 engines, loved the work did this for 30 years, now retired started new hobby when I turned 75 racing inboard hydro planes now 85 no more hydro, what really helped me I always has very good e gine,accessed ect manuals studied them well, I a.So HD very good work sheet list showing what has been done with work sheet list on what has been done, I of course is very mechanically as a person. Christopher

😂

This was a hard video to not click away from. The "ya-know-ometer" must have rolled over twice. The story of the rag in a cylinder is really hard to believe. If it was in really in the cylinder, the engine would not turn over. If it was in the crankcase, very quickly it would get wrapped up in the crankcase around the crankshaft.

@TakingOff

5 күн бұрын

Rag in the cylinder is not a "only happened once" story. THey can get stuck in there. Doesn't mean they travel into the crankshaft.

@cessnarigging

4 күн бұрын

Ya-know, I am sure they meant in the engine compartment stuffed around between cylinders. My Wife & I just viewed this vid and she had the same comment about the “ya-knows”. Believe it or not I am not from Wisconsin 👀She said “you must have been nervous”. I’m sure I was, it is a bit intimidating with all these cameras rolling if one is not used to it…

@TakingOff

4 күн бұрын

Darn cameras