Travis might disagree, but this Beau character is A LOT of fun to work with 😆

@Jessie_Smith

Жыл бұрын

He is a true American hero if you ask me 😂

@jonbaker3728

Жыл бұрын

Uh, it's T- Rav

@Hendreh1

Жыл бұрын

​@@Jessie_Smith In Germany you would be Leader of the Work council Jessey 😎👌

@Jessie_Smith

Жыл бұрын

@@Hendreh1 Lol that is a scary thought there.

He didn't even need to fake the accent 💀

@Jessie_Smith

Жыл бұрын

lmao Barry said I fell into that character way too easy. I don't know whether to take that as a compliment or insult 🤣 either way it made for a funny video

@jamescerven4400

Жыл бұрын

@@Jessie_Smith haha that's great 😂

As a former machinist now inspector, I find this absolutely hilarious. Mainly because I had some old school guy show me this “fix” when I blew a hole too big. I didn’t take his advice. Also, the cmm will pick that up in a heartbeat 😂.

@ThoinFrostaxe

Жыл бұрын

Hey fellow inspector! Just curious, do you use any vision measurement systems? The Keyence has replaced the CMM for the majority of the parts I inspect.

Please keep these coming every Now and again. Beau is a natural in front of the camera and we have all known a few Beaus in our days. Great content as always guys!!

@xapemanx

Жыл бұрын

he got fired. his holes weren't small enough

As an inspector in a shop that mostly makes aerospace parts, this hits hard lol

That is a great trick. I have been working as a machinist for 18 years now, never seen that one before.

Man this Titans of CNC channel is great. Learning usefull tricks every day

@matejkuka797

Жыл бұрын

its "irony" right ? right ? :D

@NonsenseTreasure

Жыл бұрын

Don't lie, like you haven't already known this trick 😅

@MrBodzinek

Жыл бұрын

@@NonsenseTreasure idk what are you talking about😆

"In order to fix things, sometimes you need to rise above the restrictions of good engineering practice."

This was literally the best. EVER. When he spit his drink everywhere. LOLOLOL MORE episodes of Beau please.

@Jessie_Smith

Жыл бұрын

I have a feeling we haven't seen the last of ole Beau Nogo! lol

We NEED more Beau Nogoh😂

finally a grindr joke 🤣 don't even know where the acting starts or stops. so real

@Jessie_Smith

Жыл бұрын

lol I was wondering if anyone was going to pick-up on the Grindr joke lol Thanks for noticing 🤣

@mkac

Жыл бұрын

and the sponsor of today's video is Grindr

This is Awesome! Machinist Extraordinaire! 30 years experience 25 years old!🤣🤣! Great Video!

That has the be the funniest video y’all have put out. That made me laugh from a healthy place deep down inside.

@Jessie_Smith

Жыл бұрын

Thanks for watching. Glad you enjoyed it! we certainly had a lot of fun filming it

I worked at a shop where the owner told me once that he used to use ball bearings to fix bad threads lol. The Owner!!

@Davezyyy

Жыл бұрын

Totally normal :D

@wzhaicthtaarkyer

Жыл бұрын

I have seen it more than once.

@Sara-TOC

Жыл бұрын

Honesty is the best policy! We all have little tricks up our sleeves when the time calls for it! lol

@F30586

Жыл бұрын

I could never do it. I’d rather take my beef and remake the part or parts.

@wzhaicthtaarkyer

Жыл бұрын

@@F30586 yes sur!!

the funniest and most relatable video i have seen in a long time

Setting that hook was priceless LOLOLOL , good one

A dowel pin hole was a bit to big for the pin, so we took a center punch and smashed it shut. It was for a testing tool that would only be used a couple of times, so it wasn't a big deal. So yeah, I've done that before XD

@Sebastian-ed5kt

Жыл бұрын

did this in my journeyman exam😂 helped all fellow guys there to fix their tolerances with it too parts were checked once and then assembled so no damage there was just to get the full points😂

@nofunallowed3382

Жыл бұрын

@@Sebastian-ed5kt it ain't stupid if it works, right?

@Sebastian-ed5kt

Жыл бұрын

@@nofunallowed3382 exactly, got me a good grade and currently I'm training for the master precision mechanic in Germany

@MaxStax88

Жыл бұрын

We used to use an electro pen and burn the side all around the dowel pin, then beat that pin in with a heavy hammer lol.

@nofunallowed3382

Жыл бұрын

@@MaxStax88 haha we do that too!

Press fit hole and your pin just slides right through? Hammer and cold chisel with a couple little tappy tappys around the edges… not to much now you’ll make it too tight and your good to go. Call that the Puerto Rican knurl 😂😂😂

Could not stop laughing, i know a couple guys just like him

All kidding aside, I was waiting for Bo to bore out the holes bigger, weld a hunk of rebar with the ribs still on it into each hole, and drill new holes in the rebar.

This is the funniest video I have EVER seen! MORE OF THESE WITH BEAU!

@Jessie_Smith

Жыл бұрын

We need to start a petition for Titan to hire him back lol

Had a lot of fun helping film this one😂 Can't wait for Beau to return!

@Sara-TOC

Жыл бұрын

😂🤣😂🤣 EXCELLENT WORK!!!! This one and Barry’s disco ball video are my favorites I must say! 🎬👏👏👏

@Jessie_Smith

Жыл бұрын

We definitely haven't seen the last of Beau!

@shaniegust1225

Жыл бұрын

Who filmed the bathroom segment 😂😂

@markdavis304

Жыл бұрын

@@shaniegust1225 Ben and I filmed and Barry directed! It was a fun shoot🤣

My god! someone give that man an Oscar!

@Jessie_Smith

Жыл бұрын

Lol Barry says I didn't even have to act. He said just be myself and that's what came out lol

"titan, what you doing over there? I know you're always messing stuff up" is my favourite line 😄

dude, i'd certainly like more videos just like this!

@Jessie_Smith

Жыл бұрын

Thanks, it's good to laugh at ourselves. We all have worked with a Beau at some point lol

I used this filthy trick once or twice. It is not the way to do it but if the part needs to ship asap you could sneak it for the sake of urgent shipping

@Jessie_Smith

Жыл бұрын

It's definitely one of those unspoken "tricks" that we are all ashamed of but yet have all done it lol

" SET THE HOOK!!" Gets me every damn time 😂

Thanks, now I have coffee on my monitor/keyboard.

The Grinder App nearly had me in tears! 😂😂😂

Hi, I'm from Malaysia, this video is presents the truth about my crazy job and it's works at anytime.😂😂

This video is unbelievable. Brilliant!!! I can't praise Titans of CNC enough. There shop is impeccable, they only hire top machinists and produce top parts. That's a machine shop I would love to be a part of.

The most hilarious part about this is the shop foreman in the last shop I worked at did this to a part, a very large and expensive part that had to ship the next day🤣. I was the QC inspector and he was my boss and I told him this wouldn't fly with the customer but he said to let it go, we shipped it that way with a +/- .0005" 2.000" bore that was .001" oversized from the top of the tolerance. It came back to us three weeks later and required the weld department to cut off the affected portion of the weldment (these are _big_ parts BTW, 20,000 lb chunks of steel), reweld a new piece in and go back in the CNC mill to recut the features. I guess I was right lol.

Yo This is comedy, satire, machining- just everything. Well played- I LOVE it. Please keep making videos like that.

I laughed hard and I laughed several times!! Your BEST YET! Thank you, my fave red neck machiniat!

@Jessie_Smith

Жыл бұрын

lol thanks. Glad you enjoyed it. It was a lot of fun filming this one

I inspected a part for a customer once that was made by another shop. Explaining to them that the other guys were peening bores was a lot of fun

This made my morning.

In Germany we call this "Kugelbumsen" and i think that's beautiful.

@Jessie_Smith

Жыл бұрын

lol OMG you gonna get me fired for googling that term 🤣🤣🤣

@alt-ic2il

Жыл бұрын

Bei uns: "Der Passungsmeister hat wieder zugeschlagen."

One of my FAVORITE videos to date! An actual quality inspector taught me this trick. 😂 I’m glad you showed a clip of Joe Dirt, excuse me..Joe Dirté, because that’s the first person Beau reminded me of! I can’t rave about the media team enough! 👏🎥🍿

@Jessie_Smith

Жыл бұрын

Life's a garden, Dig it

Loved the Stone Cold chugging a beer

Best video ever. That was hilarious and I've known a few Beau in my less than 10 years of career already

@Jessie_Smith

Жыл бұрын

That's why we wanted to make this video. We have all worked with one or two Beau's in our day....unfortunately lol

I swear by everything that is dear to my heart, I laughed with all my heart in the last scene 😂😂😂 your acting is more than wonderful, man, This character should be repeated more and more 😂😂😂😂😂 Mr. Titan chose best machinists and best comedians team in the world 😂

I just put the part in a vise and squeeze it from all sides. Works every time!

Beau's nickname is probably 007 lol. This video was hilarious! I hope Beau shows up more often haha

I'll go fishing with Bo-No-Go. He still had his safety on👍

@Jessie_Smith

Жыл бұрын

Safety first! unless we are in a hurry then the rules seem to get bent, right? lol

@shaniegust1225

Жыл бұрын

Bo-no-go!!! LOL Love it! 😂

Ahahaha now this is the content we need! DAMN QUALITY CONTROL!

@Jessie_Smith

Жыл бұрын

Those dang quality guys always stirring up trouble lol

Sometimes all qc cares about is the gage if they buy off the ball bearing trick that's on them. Very funny skit.

Dude this is GOLD

Ummm, Jessie, I think you're quite comfortable in front of the camera now. Freaking hilarious...good job!

this is absolute gold holy shit. love yall

We used a bearing ball and a hammer to fix a loose reamed holes 😅 This video is funny af, make more with hillbilly character

@Jessie_Smith

Жыл бұрын

I have a good feeling he will be back lol

Beau Nogoh... MAN I CAN'T WAIT TILL WE GET A BEAU IN THE SHOP This is an excellent video production! Maybe not excellent parts "production" haha. I laughed so hard throughout!! Great acting my friend

This absolutely made my day......love it....

Hahahahahaha, I like, greets from germany. Hope to see more from the best machinist that i ever heard of

@Jessie_Smith

Жыл бұрын

Lol we haven't seen the last of Beau Nogo!

I’m cracking up here. Let’s see more beau nogo in the future

Wtf... This video got me off guard. 😂

This was quality production, even if the part wasn't! Dude got into the role haha hilarious

We need more Beau!!

i done this number of times and to threads too!! best video,

We had a guy like that in our shop....his nick name was "The Butcher".......I saw him using a jig borer for making heavy milling cuts one day.

@Jessie_Smith

Жыл бұрын

lol man we have all known a Beau or two in each shop unfortunately. But dang using a jig bore as a milling cutter 😵‍💫that's crazy! You know it's funny you said that because they actually used to call Barry "Barry the Butcher" lol I can't wait to show him this comment 🤣

This is the best video yet. I am inspired to bring my shop to this level.

I did that a few times on the threads where no go thread enterd , i know it wasnt good practice but yeah happends on last part of a small series and always when the "no go" doesnt enter all the way you just need to deform a little bit the first thread spire :))

I think I've worked with this guy.

This may be the very best video you guys have put out

I've watched at least 90% of your content and this is by far the best "funny" video you've produced!!! Unfortunately, there are more Mr. Nogo's out there than I like to think about. A terrifying prospect for anyone who enjoys things that reliably function. Also, what is up with Dave Burgandy, I for one miss that guy and his CrAzY deals! Y'all are amazing, keep up the great work!

A friend of mine got me that same exact belt buckle during my first year working in a shop! Wore it daily for like 15 years until the loop broke off. Now it's resting peacefully retired in my draw.

I seriously thought that was a butchy woman at first ha haa

I’m dying! Great video as always!!!

@Jessie_Smith

Жыл бұрын

Thanks, Glad you enjoyed it!

Absolutely incendiary🔥🔥

everyone is now asking themselves ''Am I a cow boy? ''

Literally have that belt buckle on a pegboard in my shop. It reminds me of what I aspire to be...

This is a genuinely entertaining skit video 😂

Hahaha Barry’s gettin some competition. Seriously though, I’ve seen this happen on .

I got these camo Crocs on BOGO or my name ain't Beau Nogoh

This is probably my favorite video you guys got so far it made me laugh so damn hard I got a guy in the shop that talks back to quality like that too lmmfao

You boys are a trip. Got to have some fun or it's not worth it. Keep it up guys!

What a legend. I've used that "trick" was when I made a hydraulic lifting jack. The main valve used two steel balls to close off a pair of holes and the only way to get them to match perfectly was to shape the top of the holes to the diameter of the steel balls.

@pvtimberfaller

Жыл бұрын

That is standard for ball check valves.

You making fun of my buddy stake kracker at 4:10 😂 back at the first machine shop I worked with old school machinist had me do this to fix blown out bushing, of course the home was only about .0005 oversize and was for lumber mill equiptment, we also have knurled parts then turned to correct size😂 none of this was on any important parts but you hit the nail on the head with this one😂

Howdy there internet people; I might have a new favorite tuber named beau. Good work!

What a masterpiece 👏

This was a-tier comedy!

You know titan had a younger one editing this one with the pans and zoom ins

we need more of these!

One of my all time favorites 😂😂

Doing the Lord's work. You boy's are killin it!

We need mo' Beau NoGo, dammit!🤣🤟

Eyez waz scream’n at’em…. NO BEAU!!! YOU FERGOT DA UTTER SIDE!!! I Gess he never herd me.

@Jessie_Smith

Жыл бұрын

lesson learned I guess lol

@francisschweitzer8431

Жыл бұрын

@@Jessie_Smith shure nuff… Poor Beau

I did this once on parts that go on a warship cannon for the Ministry Of Defence. True story😂😂

I absolutely love this!

All depends on the part, sometimes this trick is really a viable option and yes I've done it before but there are parts I've scrapped because it was not a good part to use this "technique" on. If I'm simply making a shop fixture and the press fit for a locating dowel pin became a tight slip fit that is an example of where this might be used.

please more videos like this I was rolling

This is awesome!

Best video yet!

Your best video guys ! LMAO

WE WANT MORE BEAU! and also Beau could have a grumpie, conservative, old uncle who is doing things like 50 years ago and always complains on new methods and stuff... great funny content guys! keep up the hard work and best wishes from austria.

This was a great video.

Titan, your team's amazing! :)

This is internet gold 😂

@Jessie_Smith

Жыл бұрын

Only the best content gets made here lol

I was expecting some sort of powdered metal laser deposition

That was hilarious!! Great video guys!

Great way to start my morning lmao 😂