Thanks for the feedback! Please let us know if you have any questions or comments as you get a chance to continue testing it.

@erikprzygoda8641

2 жыл бұрын

That is support right there. Best customer service ever

Great review! The Neuma 4 is my go to machine. The steel and solid brass grips are a bit quieter and have less vibration, I recommend one of those.

I didn't expect it to be as good a liner as it is. I love it. I need more so I can try it as a shader and packer, since I can't bring myself to switch the lining cam. I got the slim solid Brass and it is fantastic. We're setting up our new Studio KZread and Twitch channels and start on machine reviews shortly; can't wait to sing my praises of this machine/company. Which reminds me; customer service was excellent as well.

Hopefully Carson will produce a dedicated batterypack for it!

I'm sold.. thanks Chris

This is one of the best machines I have used! It really punches those lines in like no other rotary. And it comes out so crisp and sharp on the edges. The 20% cam is the best for lining. Great machine!

I have the stainless steel grip and a lighter one. The heaviness of the stainless grip with the brass bearing arm and 20% cam lines really nice. I tried the aluminum arm with the lighter grip and shading cam and it gets super soft. Too soft I thought. Like two completely different machines for sure. Great machine if you’re a person that likes to tinker. Seems like there are endless combinations. The other cool thing, is as Carson has made improvements to the cams and such, he just sent the new and better ones to me for free, without even knowing they were available. Two different times cams have just shown up in my mail. Great company.

I love my neuma 4 i’ve had two for about a year and a half an hour I have one set up with the aluminum bearing arm and one with the brass bearing arm my brass bearing arm are used at the 28% and the 20% my aluminum bearing arms i used on the 33 and the 40% I do have stainless steel grips and brass But all around I love the machines

One of the better reviews for this, thanks! I love my machine so far as well..

@ThatTattooShow

2 жыл бұрын

Thanks for watching!

Nice review, I’d considered one of those but was put off by having to change the cam profiles but you’ve just shown how simple and fast it is , thanks for showing that .

@ThatTattooShow

2 жыл бұрын

I was quite impressed with how fast it is to swap them out.

@michaelhervin6049

2 жыл бұрын

Don’t know if you already know but jungle tattoo supplies have these in stock

Gonna go with the heavier/bigger grip me thinks, as is front, not back heavy.. and saves me hands the daily trauma.. thanks again mate

I been looking at getting a Neuma 4 but have been unsure about getting one. This has helped out abit thanks 😊

@markotat2332

2 жыл бұрын

At this price is a crack !!!does not worth..

I have been using my Neuma 4 for over a year and a half now. I'm an apprentice and find it very customizable and easy to use. It's better than buying a separate machine for packing and a machine for lining, etc. Each cam is essentially a new machine and it is way cheaper than buying a ton of machines. It can literally do anything. It's definitely worth buying and seeing what works for you. It can be frustrating if you don't try the different cams but once you get the best cam for what you do, ie: packing, blending, shading it's a dream machine. I use the brass bearing arm for everything atm. The 3.6mm 20% for lining, whip shading and sometimes color packing small bits too. (I use the 33% 3.6mm for B/G). But the 3.6mm 40% packs solid and fast and is also great for whip shading (and even lining small letterwork pieces easily too). I still need to buy more cams to see what this machine can do. But really this machine is customizable. Although there is a larger learning curve than plug and play brands, It would be hard for me to blame the Neuma for my shortcomings. Great machine, and fantastic bang for your buck!!!

@bwildtattoo

2 жыл бұрын

Only negative thing I can add is I didn't receive an Allen Key with my machine. I also only received one cam (as there was only one cam available at that time). I had to pay a lot of money to buy two cams as I live in South America. So buy all the cams and bearing arms.

@emiliemendoza9652

2 жыл бұрын

I am an apprentice in a shop that is coil user. I wonder… do you change the cam in a session? Done lining, unpack, sterilize, change cam, bag the machine and keep going?

Been using this for close to 2 years. Speeds up lining time, get really good heals. No gimmicks just fuckin works and is 100 percent a workhorse!!!!

@ThatTattooShow

2 жыл бұрын

After this review they sent it back to me which is awesome! So I’ll be doing more testing with it. I really like using it for linework :)

Yes I would like to see these being stocked by a uk based suppliers, would defiantly give it a go. Jake meaks (think that’s how his surname is spelt) in tattoo fireside did a interview/review on these machine. Worth a watch.

@michaelhervin6049

2 жыл бұрын

Jungle tattoo supplies uk stock them

I was building my own machines. Then when I saw this. I just gave up. No way am I comming up with anything better. So I just got this instead haha. Stainless shift. Also a nice thing is you can buy a new grip and its a different machine. Make it what you want.

Thanks Chris - I am looking for another machine. Do you prefer any other machines over this one though.

@ThatTattooShow

2 жыл бұрын

Personally. The Flux from FK irons is still my favourite all rounder and my go to machine. But depending on what styles or effects etc I have a few favourites. I’ll do a video about it

this may be a dumb idea but if you get another one maybe you can do a few simple blends on practice skin with the different cams in a row to show a comparison with the duration.

@ThatTattooShow

2 жыл бұрын

Am totally up for that. I had it sent over Xmas when the studio was closed so literally had it to use on skin for a couple of days.

@garcia2917

2 жыл бұрын

@@ThatTattooShow sounds good, also how would say the short duration felt compared to lining with the flux?

@ThatTattooShow

2 жыл бұрын

Its different.

Might be interested. / Sweden.

Tried it and didn’t get on with it . The voltage I needed to use it on made it way too noisy for me it was to off putting . I found the hard cam too hard then it just went spongier the further down the cams I went . I tried the 3.6 and 4.0 cams . The problem with it for me was each cam seemed to work well with different things , packing , shading , b+g but I found I couldn’t settle on one cam for all . I was constantly changing cams

@Witty..UserName

2 жыл бұрын

Did you start on, use coils in the past? as far as one cam doing it all... isn't the point of having multiple cams to be able to adjust for various disciplines? serious questions - because i really like coils. it's what i learned on. i have used some rotaries & am mixed about them... but really like the convenience. i am hoping maybe this may be the compromise i dream of.

@snakeeyes1662

2 жыл бұрын

@@Witty..UserName i feel a bit tge same the shading ones are wank

When a you going to make a video on the packer

@ThatTattooShow

2 жыл бұрын

It’s scheduled.

I have a problem with the grip when using a long taper magnum. it feels like the motor will fall out when I adjust how far the needle comes out. Does anyone have a solution to this?

@ThatTattooShow

Жыл бұрын

What needles are you using? I’ve not had this problem with the neuma.