Your videos are fantastic, with easy to follow instructions. Knowing what to expect before tackling the problem eliminates all the surprises. Thank you Dave !

Dude what a short , to the point excellent video.. thanks!

hey Dave - Chrysler tech here out of Ontario - thanks for the help! couldn't find the resistance spec in Service Library, you're the man! Truck I was working on was throwing up an intermittent p2580 circuit low code.

Thanks Dave, this was my Labor Day weekend project

Just saved me 200 bones... Thank you so much brother! What a great channel

What an amazingly helpful video. Thanks very much for taking the time to make this!

@MotorCityMechanic

8 жыл бұрын

Thank you for finding the video and for watching. Make sure to subscribe

I watch your videos they have saved me $$$$, I have purchased parts from gens's too. The speed sensor I picked up from Amazon for $27.00 and it works perfect, it looked just like the original from dodge, amazing how much the mark up is on parts. Thank You for helping!!!!

@MotorCityMechanic

5 жыл бұрын

Your welcome and thanks for commenting. Glad it all went well and that you saved some money there. Enjoy the weekend and make sure to subscribe.

Awesome step by step video. Was able to easily replace the speed sensor in my 08 dodge 3500 myself. Thank you

@MotorCityMechanic

8 жыл бұрын

Your welcome. I appreciate you checking out the video. Make sure to subscribe and share the videos

extremely helpful. Thank you and keep the videos coming

@MotorCityMechanic

6 жыл бұрын

I sure will Louis and make sure to subscribe if you havent already and enjoy the weekend!

This video is going to save me time and money to get back on the road. Thanks

@MotorCityMechanic

4 жыл бұрын

D Francois glad it helped. Thanks for commenting and make sure to subscribe

Awesome!! Thank you for the help and explanation!!

@MotorCityMechanic

4 жыл бұрын

Your welcome and thanks for the kind words. Make sure to subscribe

Thank you for making a great video

Very informative videos, just subscribe keep up the good work

Thanks David 👍

Hi David! Thanks for the great video. Two things. First, great advice on the o-ring. When I removed mine, the o-ring stayed and I had to go in after it. Second, I measured open circuit on mine but it still read rpms on alfaOBD. I think the center pin had a bad connection (wasn't an OEM sensor). I actually swapped it out with the oil line in place but its not a big deal to move it if I felt like it. Thanks again! Sorry that you don't seem to be a cummins /ram fan because I appreciate your videos. I asked about an exhaust issue couple years ago. It turned out to be my actuator. I went with a city diesel unit on an aftermarket turbo.

got to love KZread thanks David now I know what's involved in the process

@MotorCityMechanic

8 жыл бұрын

+joe Groft I say that I have fixed a lot of things because of youtube from wash machines to plasma TV's. Your very much welcome Joe. Thank you for finding and watching these videos. Make sure to subscribe.

Thanks Dave! You saved me over $470. Found the part on Amazon for $27 and the work was easy.......

@MotorCityMechanic

8 жыл бұрын

+hypoglosal Awesome. Nothing like saving money. Thanks for the update and for watching. Make sure to subscribe!

@600zxr

5 жыл бұрын

What's the Amazon part number?

Great video. Thank you for sharing

informative, clear communication, and step by step visual /audio - Good stuff. Only gap was that it was not explained why the speed sensor goes faulty.

@MotorCityMechanic

8 жыл бұрын

Thanks for the comment. The bad thing about the sensor is that there no way to tell what exactly happened. No physical damage and nothing you can take apart to see. I assume the internal windings broke. Wish it was something that I could actually show but not in this case. Thanks again for watching and make sure to subscribe

Thank You for the video

Great video, My 6.7 is getting P2580 and P2579. Besides the code i noticed my truck blowing alittle smoke and smelling more exhaust. It still builds boost though. My truck is deleted so I didnt notice any re-gen issues. I tested the sensor and its not showing any resistance. I'm placing an order on Geno's right now. Thanks for making the video. Had my truck at the dealer for an airbag recall yesterday and I am glad i cleared the codes before I went in. $400+ is a crazy markup on a $187 part.

@MotorCityMechanic

6 жыл бұрын

Thanks for the info. Geno's is a great place to get parts. One thing is that what they sale...they stand behind. If they start getting complaints about a part....they pull it, refund the money, and find a better source to get it from. Great people and great customer service. I get to deal with them on a personal and business side and I stand behind them and back them up any day. Thanks for watching and make sure to subscribe and enjoy the weekend!

@BorisFett

6 жыл бұрын

I get all my truck parts through Geno's. I totally agree they have always been awesome.

@MotorCityMechanic

6 жыл бұрын

Well I appreciate you supporting them and giving them your business

Great friggin work.

Excellent instructional video. Sure made it easier for me.

@MotorCityMechanic

5 жыл бұрын

Thanks for watching Gerald. Make sure to subscribe and have a happy New Year!

thank you !

Great video, done very well.

@MotorCityMechanic

6 жыл бұрын

Thanks Roscoe......glad you liked. Appreciate the comment and make sure to subscribe and enjoy the labor day weekend.

thanks man u have save me over 900$ big ones by showing me how to change out the crank shaft filter and cleaning my egr valve and my turbo speed sensor . keep up the good work

@MotorCityMechanic

8 жыл бұрын

+crjavier1987 Awesome. Nothing sounds better then saving money. Glad the videos helped. Thanks for the comment.

@crjavier1987

8 жыл бұрын

thank any time looking forward for more of you videos

@MotorCityMechanic

8 жыл бұрын

+crjavier1987 I will try to keep them coming. Thanks again

Helluva guy u are thanks man!!!

Thanks for you video.

@MotorCityMechanic

8 жыл бұрын

+Trujdt32 Your welcome. Make sure to subscribe!

This guy is a master mechanic

@MotorCityMechanic

6 жыл бұрын

Many many thanks William! I feel honored. Make sure to subscribe and check out my other videos as well.

@ideath173

6 жыл бұрын

Just did. You saved me hours of time on the dash and evap core removal of a 2013 Ram 5500. It took the previous tech over 2 days. i had this entire job done and recharged in a day. Your attention to detail is much appreciated. Thank you sir.

@MotorCityMechanic

6 жыл бұрын

When you do enough.....2 hours is what you can do it in. It becomes second nature. Some mechanics over stress the dash removal thinking that they have to remove each panel piece by piece. Always glad that I can help.

Thank you👏👏👏👏👏

@MotorCityMechanic

Жыл бұрын

Your welcome! Thanks for watching

David I have an 07 Dodge ram 3506.7 L can you please explain how the exhaust break works this is a six speed four-wheel-driveThank you for the videos they have a whole lot of information on them I think you CK

Awesome.

Really enjoy your videos. Very informative! I was wondering if you have a video for the Cummins 6.7 Code P2262. Thank you sir.

@cesaralfaro7476

5 жыл бұрын

I would also like help with the same code can’t figure it out plz help

Can you go over what is required on the 60k service and how to perform cleaning the EGR Valve, and turbo?

Great videos! 2009 ram 2500 the diesel exhaust brake worked awesome and kicked in/slowed me down and I used it all the time for daily driving, without the tow/haul mode activated. Again, it worked great! Now, the exhause brake doesn't seem to be working/kicking in as it has. It no longer slows me as it had before. Going down slight grade hills or any grade hill for that matter. . . the exhaust brake does not kick in or slow me down at all. However, it will if I activate my tow/haul mode button it works. Any idea what is causing this to only work with tow/haul engaged?Thanks

Great video! Chrysler should consider giving you a huge monetary increase and allow you to train inspiring mechanics in your dealership! Thanks again

@MotorCityMechanic

7 жыл бұрын

Wish it was that easy lol. Thanks for the kind words. Make sure to subscribe and keep watching

@alittlebitofeverything5090

7 жыл бұрын

I will and I already subscribed :-)

@MotorCityMechanic

7 жыл бұрын

Thanks

Dave, Thanks so much for you videos. My 2010 Mega had/has the code P2579. I tested the Turbo Speed Sensor in the truck and it was within the ohm range at 900. In the video you mention it may be the ECM? How can a shade tree guy test that? Could the P2579 code also be thrown with a Exhaust Pressure sensor code P0471? I change out the Exhaust Sensor (Geno's) and noticed the Exhaust Pressure Sensor Tube tube was clogged. Unable to clean so I am geeting a new one from Geno's this week. Is it possible the P0471 could cause the P2579? Thanks again for your videos, so clear, concise, and informative.

Another price check doing the turbo change out. The seals for the oil and water lines. Dealer $55.65 each. Genos garage $5.50. Crazy 😜.

You know your stuff, thank you. I replaced the speed sensor hoping it would fix my issue but it didn't. I'm getting a P0046 code occasionally and it goes away on its own. Under a heavy load, going from zero to uphill, the turbo just doesn't kick in. Otherwise, it works fine. Do you have a video of P0046 or have another suggestion on a part to replace? 2014 RAM 6.7 3500 Thank you for all you do.

very quick easy to understand and informative!!!!! what are the symptoms of a bad speed sensor???? i have my own symptoms just need a confirmation... thanks for the video bud... you rock

@MotorCityMechanic

7 жыл бұрын

Each time I had a bad sensor.....it set a code. The code was the the first symptom. That was the last speed sensor I had to replace and to be honest....I cant remember what that symptom was lol. Theres a chance that the truck may not do a regen with that code present and that could also cause an issue over time if not addressed. Another possible issue is boost. The speed sensor not reading could cause the turbo to not work correctly as well which would cause a lack of power concern. Wish I had more accurate symptoms but like I said......its been awhile since my last turbo speed sensor. Thanks for the feedback and kind words. Much appreciated. Make sure to subscribe!

Watched your videos and they are great just did all my fluids changed oil both, fuel filters . Went To start acted like battery dead jumped it and it started right up ! But shows red lightning bolt throttle body sensor ? What do I do help

My 2013 had the turbo go bad. Apparently the new turbo came with a bad one of these, or it was damaged in shipping.

I am getting 9Mega ohms with sensor in place. Made sure with auto range on DMM that I was not mis-reading the meter.

@MotorCityMechanic

8 жыл бұрын

+MagmaDiamond - Road To 200 Subs If your getting 9 mega ohms then that's way too much. It doesn't matter if the sensor is installed or removed....you should get the same reading. Specs for a good sensor are 600-1600 ohms.

Nice vid I figured it'd be easy but always like to "read the instructions first" After my dealer wanted $600 I called cummins gave them my engine number they gave me their price of $196 + shipping, I got the part # called peterbuilt down the road dickered with them a bit and got it for $190 + $12 shipping! Also buying the filters fuel in particular is a TON cheaper than NAPA or any autoparts store. Anyone with a Diesel needs to contact their nearest big rig sales stores and you're welcome ;-)

@MotorCityMechanic

6 жыл бұрын

Appreciate all the info Jason and for you watching. Dont forget to subscribe!

I am getting reading on my 2007 Dodge 3500 - P2580. Because I was having my transmission rebuilt, I decided just to change out the turbo sensor cable. The code did not go away. What do you suggest checking next? Do you have a video clip on how to change out the Boost pressure sensor?

Do you know how I can remove the pitman arm on an 08 Dodge Ram 2500? Or do you have a video?

Great video I have p2563 and p2262 can you help me? what could be the problem on the 2 codes

Just went to lithia Dodge and they quoted me $840. Went to Cummins North West got a genuine Cummins part for $225.

@MotorCityMechanic

2 жыл бұрын

Great job on not letting them do it. Good thinking on your part.

I’m guessing a P2580 - turbo speed sensor circuit low - could be the same thing? It’s been an intermittent code for a couple years since I deleted the truck at 97,000 miles. Has 208,000 now.

Is it possible to have a 0 Ohm reading, VGT inop but Open, and no code? Fully tuned, deleted, new actuator.

Do you have a video showing removal and replacement of a cracked 2007 6.7 exhaust manifold? Have a new BD manifold but not enough clearance to get the turbo under it. Great videos will be doing egr service before putting the truck back together. Thanks

@MotorCityMechanic

7 жыл бұрын

I havent made a video on that as of yet. So far I have only had to replace the manifold gaskets and not the manifold. It is time consuming with having to take everything off of it. Do you have the turbo completely out of the truck? Curious based on what you were describing. I do recommend removing the turbo mounting studs except for the back rear corner against the block and the single one on the manifold itself.

nice but what was the symptom and was there a drivability issue ?

Great videos, I have a 2012 RAM and get code p2579 but it only comes on when pulling a load. If I clear the code it stays off for a while and comes back on. If I'm not pulling anything I don't get a code, what do you suggest? Thank you

Always the best videos! Would you please do a video focused on the actuator? 2013 ram 6.7 2500 Code U010C "Lost communication with turbo charger." I ask this because I can hear/feel the turbo working and assume that means the turbo is still good and most likely the actuator is bad? My other concern is that if I just replace the actuator then I have no way of calibrating. Should I just replace the entire turbo and actuator? Go with reman or new? Any suggestion(s) would be greatly appreciated. Thank you very much!!

@ScreenFeenin

5 жыл бұрын

Crazy. Must be the 13's, I had the same exact problem. I just replaced the turbo with a bd 364.5 iron horn. The hole for the stock speed sensor is too small though.

I have a question for ya. I just put in a brand new vgt for my 6.7 but I have no exhaust break. This is my 4th turbo and I’m beginning to pull my hair out trying to figure out the problem. Have you got any ideas? Thanks

Hey thx can you do a video on a clogged turbo mine sounds like crap thx

@MotorCityMechanic

8 жыл бұрын

+bigron18ca Morning, I will try the next time we get one in for that issue. So make sure to subscribe so that you get notified when videos such as that get uploaded.

Ok, now we have a new issue. Code is back and tested speed sensor and it is at 1200. What else could be the issue when the speed sensor tests good?

I have a 2009 5500 6.7l dodge cummins and i have code P0106 for the map sensor. I have replaced the map sensor, intake temp sensor, and the turbo speed sensor. Any Ideas on what this issue could be? I have no drive ability concerns just a check engine light that comes on about 10 minutes after i clear the code. I also ohmed the wires to the ECM at .2 ohms. Load tested the harness with a duel filament bulb and it passed. Software issues?

Hi, how are you bro, ok, i just got the reading for the srs light, U11b0-00 (lost communication with right side satellite sensor 4). Do you know where can i locate this sensor? What should be the problem? Thanks in advance

I was wondering if possible you can answer a question I have with my truck. Is it possible to have a had turbo without showing a code? I have a 2008 dodge ram 6.7 cummins thankyou

If this sensor going out would you have a lost of boost then have boost and lose your exhaust brake

I have a 07.5 6.7 always stuck on power reduced ,exaust brake stopped working checked intake engine ia completeley filled with soot

I replaced my sensor and I’m still getting the CEL with the same code. Any thoughts?

Could I test the turbo speed sensor with a multimeter on the electrical end while the sensor side end is still in the turbo?

@MotorCityMechanic

6 жыл бұрын

It can still be tested while still mounted in the turbo. Thanks for watching and make sure to subscribe

Got a code on my OBD for a turbocharger control A module. What am i looking at?

I have code p003a on my 2016 ram 5500 6.7 Cummins, turbo and exhaust brake show numbers but can’t feel or hear either working. ??? Any suggestions ? Also had p2bac but drained and refilled def fluid and that code is gone, now just the p003a ?😩🔫

Can you do a how to for turbo cleaning. I'm wondering if I should drilland tap a valve and spray, or take it off and clean it maually. I have a U010c code

@MotorCityMechanic

7 жыл бұрын

I dont have a video on the cleaning. The cleaning that we do is with the turbo on the vehicle and it requires the cleaning port and also the scanner to perform the actual cleaning. The scanner will actuator the turbo plate to make it move back and forth repeatedly to help clean it. I havent had the chance to clean one off the vehicle which I would love to but I dont have access to a turbo to do this on. The code that you gave me is more electrical then mechanical. It requires testing circuits to see if you have the proper readings as well as having a scanner that can access all the modules and then check all of them to see what other possible codes may be present to help aid in the diag. Most code readers cant read all the modules....only the main items like ABS, TCM or PCM. Thanks for watching and for the question. Make sure to subscribe

Where is turbine/input shaft speed sensor located ? I’m getting code p0716 on my 2015 ram 3500

Do the specs for good ohm range come on the package? Or is there another resource that contains that kind of information?

@MotorCityMechanic

8 жыл бұрын

+boxysquare Afternoon, the packaging doesn't have any specs. In the video I mention that the service info states 600-1600ohms is when thin specs. As long as it falls within those two numbers you should be good to go.

I have a p0046 code. What to do!? It is a Cummins 6.7 turbo engine. Thank you!

GREETINGS, I AM A FOLLOWER OF YOUR PLATFORM AND I WANT TO ASK YOU ABOUT THE RAM 3500 2017, IT DOESN'T WANT TO MOVE ON, SO IT'S AS IF IT HAS NO POWER, THE TURBO DOESN'T WANT TO GET IN AND IT'S NOT DAMAGED, I HAVE ALREADY CHANGED THE AIRFLOW SENSORS AND I WANTED TO KNOW IF BY CHANGING THE SPEED SENSOR THAT IS IN THE TURBO YOU CAN RECOVER THE STRENGTH, I WOULD LIKE YOU TO EXPLAIN EVERYTHING REGARDING THAT PROBLEM, I HAVE ALREADY PUT THE SCANNER ON IT AND IT DOESN'T GIVE ME THAT CODE

Hey buddy great video - in addition to this code at the same time p0106 popped up too - some research had lead me to a conclusion that the two codes p0106 and p2579 are closely connected and by replacing the turbo speed sensor it will knock both codes out. can you shed any light on this? 2010 ram 2500 ctd

@ryanwalker6574

5 жыл бұрын

Swapped out the turbo speed sensor and i'm still getting the p2579... what should i be looking at next buddy?

@ApacheGarage

8 ай бұрын

@@ryanwalker6574did you end up fixing your issue? I’m having the same problem

What about P2589?

hlola, tengo una RAM 2.500 Laramie 6.7 y en el taller me indican que tengo que reemplazar la VGT. Cuales serían los códigos de error que justificarían este cambio...Favor podrías ayudarme, gracias

@MotorCityMechanic

8 жыл бұрын

+Pedro Cáceres La noche, el código más común para substituir el turbo es P2262. Hay otros códigos y otras razones. La plancha en el turbo y puede provocar que el motor no tienen poder. Requiere leer los datos utilizando el escáner para ver si la placa se pega. Hay talleres de reparación que pueden reconstruir el turbo o limpiarlo si es necesario. Basta con comprobar todo antes de cambiar. Gracias por ver los videos y por la pregunta. No se olvide de suscribirse.

Tool box tour?????

Hey brother, I just noticed 2 of these codes when I was trying to clear my Tire pressure system... The 2 codes were in there but the check engine light never came on... Wondering why that light wouldn't be on if I had the codes.. Thanks and I love your vids

@MotorCityMechanic

6 жыл бұрын

Most likely they are older stored codes. They would have set the check engine light at some point unless they are pending codes. Typically codes require an issue to happen twice to mature to an active code and then once it no longer happens....becomes a stored code with no light on.

@aaronknope9873

3 жыл бұрын

Love the vids you do. I have code p2579 and it only happens when I am pulling a load. When it comes on and I stop and clear the code it will be good for a few hours again. It never comes on when empty. It is blowing black when I take off from a stop sign. What would you recommend?

Just for information purposes only, - Aside from having a check engine light on all the time, what is the downside of just leaving this bad circuit installed?

@MotorCityMechanic

7 жыл бұрын

Evening Todd. The turbo is electronically controlled and it's speed sensor is very important. It has an affect on how the turbo is controlled. You could expect a difference in performance for sure. This also could affect items like the DPF regents as well

Crap mine tested good. Back to the drawing board.

Hi i changed my radiator and my thermostat on my 2007 dodge ram 3500 6.7 and got the air out to the best of my knowledge . but once i put the heater on the temp gauge just drops and no hot air comes out and it starts to push the antifreeze out from the radiator cap where i have a radaitor cap funnel so it doesent spill and its burping and when i have the radiator cap on it pushes it into the resovoir if you could help me out by telling me what it could be or what i should do i would appreciate it

@MotorCityMechanic

7 жыл бұрын

What was the original complaint? As far as why the radiator and thermostat was replaced?

Just got a code on my 09 dodge 6.7 P2563, what would you recommend to fix this ? Thanks bro.

@dirtbiker24732

3 жыл бұрын

I got the same code on my 08 6.7... turbo boost position sensor... How much did it cost you to fix?

I have a 08 RAM 3500 c/c code p2580 any help would be appreciated

How long do turbo speed sensors usually last?

@MotorCityMechanic

4 жыл бұрын

Most time they last for ever.....I have 245,000 miles on mine with no issues. They can fail at any time if they do at all. Thanks for asking and for having subscribed to the channel

Hi I have an 2008 ram 2500 6.7 and have all the deletes after turbo was replaced at dealership and has been running good only problem is now it has been throwing a code p2262 and was wondering if you had a video of help on this thank you man

@topnob123

7 жыл бұрын

Ditto??

@MotorCityMechanic

7 жыл бұрын

What worries me is the deletes. The code states 2 possible causes....PCM/ECM software level at the latest, soot build up on the turbocharger, and then turbo charger. Well you mentioned you replaced the turbo so it needs to be ruled out. So being that you have deletes...it means you must be running a programmer? Thats where a possible cause may be. I havent had the chance to work on any with deletes because at that point they no longer come to the dealership.

2012 2500 ram Cummins, p2271 code, what does this mean? I assume it's a nox sensor, but which one?

@MotorCityMechanic

5 жыл бұрын

Actually P2271 is an o2 sensor code. While searching it shows that there have been multiple software updates that included that code which may or may not help. Also.....there was a bulletin put out that had us install an overlay harness for that same code related to the o2 sensors. Typically I would perform the mentioned repairs first before replacing anything. The sensors are located just before the DPF filter. That assembly before the DPF is a catalytic converter.....the sensor at the rear of it is the one per that code. Hope this helps. Thanks for asking and make sure to subscribe.

What about a P229F error code?

hey buddy can u do a video on cummins turbo actuator fix 6.7 problems code p226c

@MotorCityMechanic

9 жыл бұрын

Jedthro Ropes hello Jedthro......I will try to keep it in mind if I have one come in the shop for that issue. There are really only 2 possible repairs.....attempt turbo cleaning and turbo replacement. Make sure to subscribe so that if I do upload one....you will be notified

@jedthroropes6449

9 жыл бұрын

thanks buddy I been have electrical problems out of the electronic part of the turbo.

@MotorCityMechanic

9 жыл бұрын

Jedthro Ropes Any time Jedthro.They wont let us touch the actuator. Only parts we can replace are the turbo assembly or speed sensor.

Do you have anything on code 2562 turbo pressure ?

@MotorCityMechanic

6 жыл бұрын

What is the exact year and series truck?

Is this the same thing as the wheel speed sensor?

@MotorCityMechanic

8 жыл бұрын

Sorry but it's not the same. Wheel speed sensors are also known as abs speed sensors.

is it through that code p0106 may be related to the turbo speed sensor?

@MotorCityMechanic

7 жыл бұрын

The code P0106 doesnt show to have any possible relation to the turbo speed sensor that I can find. It will take some testing varify the actual cause. Its not a common code that I see.

@invercionesconsalvador

7 жыл бұрын

Satinvanke Cuco solved my problem code p0106 by replacing the turbo speed sensor, fist replaced my map sensor and continue to have the same problem, then disconnected the turbo speed sensor, tested it and it was bad, replaced , and problem solved.

@MotorCityMechanic

7 жыл бұрын

Awesome....glad the problem got solved. Appreciate the input and comment. Make sure to subscribe and share the videos with others.

I have a P2563 code....help?

@MotorCityMechanic

7 жыл бұрын

Hey Walter....what year, make, and model? It could make a difference

Hi Dave, please HELP, as per dealer "I have a code P003A for turbo actuator and possibly to change the turbo" on my 2014 3500 6.7, dealer's parts cost 8000.00 for turbocgarger and actuator 4000.00. Please advise what should be 1st step? I really do not want to invest these money. Appreciate your tremendous help for all of RAM community!!

@MotorCityMechanic

5 жыл бұрын

I dont like the dealers prices.....a quick search online shows the turbo itself being $5000.....not $8000. Seems like one hell of a mark up. I wonder if that includes the labor which wouldnt be more then $300-$400. I mainly deal with OEM parts so not sure about aftermarket turbos .I do know that there are companies that will rebuild it for you.....you just have to remove the old turbo and get it to them. As far as which to go with.....that code requires doing some testing and getting some info on the service history to see if anything was done recently related to the turbo. The causes are the actuator needs calibration, the actuator, or the turbo. Its still a bit too early to guess as to which on without running those tests and inspections. Thanks for following the channel and for the support.

@vamaveche09

5 жыл бұрын

@@MotorCityMechanic The 8000 I got right from mopar store which is located at dealer garage, it is a huge markup.I saw too 5000 on mopar web. The labor to replace it is about 10h at 100/h, imagine...

@MotorCityMechanic

5 жыл бұрын

@@vamaveche09 10 hours! Run away as fast as you can......they are trying to rob you without a gun!

@vamaveche09

5 жыл бұрын

@@MotorCityMechanic haha that's a good one...for sure

@MotorCityMechanic

5 жыл бұрын

@@vamaveche09 Labor shoes to be 6.6 hrs so multiply that by the labor rate that the shop charges.

hi Dave i got this code p2262 on my 2010 ram 3500 , the engine light comes on and off for the last 2 years sometimes it disappears for weeks or days then it comes back , i hope it will be just the speed sensor though (not the turbo charger) ,so can you please recommend me what to try in order to pass my truck smog ? juts let you know that my truck passed 2 smogs before when the engine check light was within the OFF DAYS !

@MotorCityMechanic

7 жыл бұрын

Sent you a reply back to your email you sent.

Suppose the sensor is good and still getting this code, what now?

@caseyriggs2633

4 жыл бұрын

B Bailey same thing with my 08’ Ram

What causes this open circuit ?

@MotorCityMechanic

8 жыл бұрын

Most likely its the heat over time that causes a break in the internal wiring/circuit. Its not a common issue but it does get seen from time to time. Thanks for the question and make sure to subscribe

@haleiwahi27

8 жыл бұрын

Mahalo for the reply. I Sent you an E

@MotorCityMechanic

8 жыл бұрын

I just got back from vacation and playing catch up, I am sure I will run across it before the day is over haha

@haleiwahi27

7 жыл бұрын

I'm a little confused. What makes you think you can take a vacation? what if we had problems while you were on this "va-ca-tion"?

@MotorCityMechanic

7 жыл бұрын

haha.....I will refer that question to my wife......she values my vacations very much haha. I never really stop even when I am off.....always answering questions on my phone no matter where I am

I want code p0483

My dodge 2008 6.7. After 60mp. Lose speed !

thanks epa for all the emissions garbage that makes the newer diesel engines unreliable

I have a question for ya. I just put in a brand new vgt for my 6.7 but I have no exhaust break. This is my 4th turbo and I’m beginning to pull my hair out trying to figure out the problem. Have you got any ideas? Thanks

@MotorCityMechanic

5 жыл бұрын

First question will be....do you have any codes?