Dodge Ram 2500 Cab Clearance Lights Installation!
Автокөліктер мен көлік құралдары
My Husband has wanted these Cab lights since we bought the truck and has mentioned several times how he wishes his truck had them, after some research I found out that you can get the OEM light kit from the dealer and so I surprised him with them for an early fathers day gift! He was very nervous to drill into such a new truck, but the whole project turned out amazing!
Пікірлер: 30
This is a awesome video! I was wondering how my white 1500 would look with the clearance lights! Nice job! I’ll be ordering my set soon. Thanks for the video
@diznylnd
11 ай бұрын
Thank you so much for the kind words! We love the clearance lights! The OEM set is perfect! Good luck with the installation.
Great video as usual
@diznylnd
3 жыл бұрын
Thanks, it must have been the male actor. 😉
Great job !
@diznylnd
4 ай бұрын
Thank you!
always need to use touch up paint on the holes don't want to get moisture and rust to come
I noticed he used two step bits. Was the reason for taping the bit to show what size (how deep) to drill? I hope that question makes sense. Thanks.
@diznylnd
Жыл бұрын
Hello! Yes we used tape as a guide of how deep to go…in other words we stopped when we hit the tape line. Let me know if that makes sense, or you have any other questions!
I am surprised that there isn't more to seal those holes except for the rubber gasket. I would be nervous it would leak one day.
@diznylnd
2 жыл бұрын
Welp, so far so good. No issues at all. This is the OEM factory set and how the dealership installs them! 😉
They must have been able to link where they bought the cap light and how they did to mark the cap light so that they would be straight and at the same distance
@diznylnd
Жыл бұрын
They are purchased from the dodge dealer parts department. The kit comes with a template for the holes so they are the correct spacing etc. Hope that helps
All that video and didn’t show em at night, I don’t get it, nice install but they are meant to be seen at night
Where did You put the ground? Without taking off the roof
@diznylnd
2 жыл бұрын
Hi 👋, the ground is part of the wiring harness for the cab lights and it’s ran to the floor area of the drivers side. Hope that helps !’
Did you use a template if so where did you get it at
@diznylnd
5 ай бұрын
Yes. It comes with the OEM set in the packaging
Any chance you have the old template?
@diznylnd
2 жыл бұрын
No, I don’t think so. Maybe you could get the dealer to give you a copy?
How did you splice the wire?
@diznylnd
3 жыл бұрын
The lights were wired together from factory. Just had to find the correct wire in box and tap wire with connector
What is the oem part number for the kit
@diznylnd
3 жыл бұрын
82211190AB I believe this is it. I purchased our kit on Amazon!
what year is your truck?
@diznylnd
2 жыл бұрын
It’s a 2018. 🙂
Now they are unlawful in California unless the truck is wider than 80" I hear.
@marcosoriano9241
17 күн бұрын
It’s optional for trucks 80” and under. But, trucks over 80” require clearance lights
Really annoying music, but other than that a good video.
@diznylnd
Жыл бұрын
Haha. Thanks, unfortunately there are only so many copyright free songs I can use and one way or another someone wouldn’t like one of the songs.