Dealer wanted $400 and with your video I fixed it for $2!!! I'd seriously like to buy you a beverage of your choosing!

Wow...awesome. Thank you. Fixed in 20 minutes.

@philhaughn6537

Жыл бұрын

Glad it worked out for you

Thank you so much, you saved me a lot of money in comparison to getting someone to fix this or even for the kit. I sent my wife to our local Napa, and paid 89 cents for 1ft of hose. I have a 2014 durango. I've had this car nickle and dime me since I've had it because of cheap parts dodge has placed on this vehicle. This was just another thing. Was about to go on a trip, opened the hood to check my fluids, and then I heard a POP! It was the windshield wiper hose snapping at the bend near the hinge of the hood. I just shook my head thinking here's something else I have to pay for because of poor craftsmanship of this vehicle. With that being said, I followed your method and it was easy and now I have wiper fluid flowing again. Thank you much!

I tried this method on our Pacifica and it would work for a short period of time until the OEM Tube would break again. The tube is so brittle and clearly an issue. Not surprised at all the there hasn't been any improvement on a known failed part. Just going to bite the bullet and replace the whole line this time. Hope it's not a PITA to replace from the reservoir.

Really useful video. Helped me our. Thanks

Thank you, Phil. I spent $1.50. Inflation, inflation. Same size tube. They charge for 1 foot.

@philhaughn6537

2 жыл бұрын

I'm glad it worked out for you

Did this and the rubber hose keeps sliding off, when I spray. Too much pressure. Silicone or rubber cement?

Thank you for sharing. It was helpful.

Thank you for sharing; that is a great help

Thank You! You are a Genius.

I already came up with this idea on my own and had plenty of tubing around the house but, my problem is that my avenger doesn't have any play room at all where the hose bends. That area under my hood is completely enclosed. The hose I put on just crimps closed when I shut my hood. I don't have a 90° angle so much as a 10-15° angle. Worst design ever! Thanks for sharing though.

Did the same thing to my Journey,but after awhile it started to leak again.

Mines broke sooo many times, I have used inserts to fix it but it just broke again yesterday!

@philhaughn6537

2 жыл бұрын

I'm guessing that your in a hot and dry environment which actually causes the plastic line to harden and become brittle and thus prone to breaking. I would replace a larger section of line with rubber.

Whats the hose size??

Where you get the rubber?

TY 🙏🏽

Where do I find the tube ?

@marcatkinson7743

15 күн бұрын

I'm no expert but I bet any auto parts store near you would have it or maybe even amazon.

Hello Phil, what size of hose did you mentioned that you are using to connect?

@philhaughn6537

2 жыл бұрын

I used 5/32 or close to 4mm rubber tube that I picked up from the auto parts store. I did size it by cutting out a small section of the plastic line and took it with me so I could get the correct size.

What was the liquid you use on your screwdriver?

@philhaughn6537

Жыл бұрын

Just rubbing alcohol

My line looks smaller than that I have a chysler sebring..coupe 03

Good evening Phil ware did you get your hoses from.

@philhaughn6537

Жыл бұрын

Any auto parts store should have them in various sizes

A silicone cocktail straw from the Walmart set does the trick even better, as I believe it will serve longer, Still, there are quite affordable replacement kits :)

@philhaughn6537

Жыл бұрын

Absolutely!

Thank you, nice video

🙏🥰👏🏻👌🇺🇸💯👍