Very helpful video! I’ve been an owner of a Dodge Dart SXT for several years and I want to keep it in the best condition as possible! Great camera quality and straight to the point with details, love it.

@steveregutis9237

Жыл бұрын

YES!!!! Save the DARTS// 💕🔥🔥🤘

I replaced one of my rear wheel bearings today, I believe it was louder than yours! My Dart is a 2015 SE. I'm not sure what made it so special but the caliper bracket bolts where you had an 8 mm hex was a T50 Torx screw on mine. It took a minute to figure out why the 8mm hex wasn't fitting.

Best video on replacing the wheel bearing out there

Thank you for this video. You explain the process very clearly and include every step.

Ahh..yes..the DODGE DART// Very helpful videos you have been posting I am a owner of a Dodge Dart Rallye SXT... previous owner didn't take very good care of the car so been doing a lot of upgrades and minor fixes and Replacements myself and your videos have helped a lot 🔥🔥🔥🔥🔥 oh yeah and you got yourself a new subscriber😛

Great video. I watched another guy's video on here to get the other side replaced last year but this is so much more to the point, shorter, mounted camera, and quick edits. Much appreciated!

@FierceMotorworks

2 жыл бұрын

Thank you for the detailed feedback! I've also encountered many tutorials that were vague or took too long to get to the point

Best tutorial video ever on KZread thank you

@FierceMotorworks

2 жыл бұрын

Glad you found it useful!

Thanks for the video..my daughter's rear wheel bearings replaced on her dart..looks pretty easy..😊

yep, that's the sound im getting right now. good thing its an easy fix. right hand side, hand spun wheel and getting metallic sound, and harder to spin. no play though on the wheel itself

Great video! Thanks for uploading

I never thought of using the jack stands to hold them up lol thank you great video

I just did both rear wheels on my 2013 Dart Aero. the brake caliper screw is a 14mm, but the handbrake cable is in the way, so a socket doesn't fit. A crescent wrench was able loosen it without rounding, thankfully. The brake frame screws are 8mm hex/allen. You definitely want to buy the hex socket. An allen wrench does not provide enough torque and hex screws are notorious for camming out. Since you have the brakes apart (don't lose the wire springs) I'd check caliper pins and lube them and make sure the pads move freely in the guides (don't forget to compress the cylinder for reinstall). My rotational noise was actually brakes. The mechnic who did the brakes crammed tight pads into the guides and the pads were seized with rusting occuring on the backside of the rotor. If you want to see if the bearing is bad, the bearings on the rear wheel are exposed and you can see them when you remove the dust cap. Personally, I washed out the crappy grease with brake cleaner and repack with Lucas Red #2. Oh, leave the dust cover in alone, its not in the way at all, saves you dealing with 3 small bolts that can snap due to rust. I would just align the rotor with the 5mm alignment screw. Its whole purpose is to retain the rotor temporarily while you mount the wheel. No need to waste time with 3 lug nuts.

Great video! Thank you

Thanks you for the video

Thank you so much for this video AND cheers from one lady motor head to another. You are a bad ass.

Thanks for sharing this 😊

Thanks for the good info ('15 Dart GT)

Excellent work, sir.

Excellent!

Thank you!

Hello great video! But I have a question about the torx socket, is it a T47 because looked for it and the T style has the torx bit in it?

@FierceMotorworks

2 жыл бұрын

It is technically a torx "bit" but the other end has a socket connector so it can be connected to a ratcheting wrench like a socket. Sockets are hollow and used to grab hex nuts/bolts. So torx bit, socket, the wording is sort of interchangeable in my opinion.

Would love to see thermostat replacement on dodge dart! Great videos!

@FierceMotorworks

2 жыл бұрын

Let's hope my thermostat doesn't fail any time soon, but if it does, I'll make sure to do a video on it. Thanks for the suggestion

@kendallwrench739

2 жыл бұрын

The thermostat in the turbo cars is a bear apparently

Do you happen to have part # on spinal nut. I might try Amazon. Thanks

You can't help me with were is the wire of the temperature ambient sensor..??

Ive been watching alot of your dodge dart videos. Thank you for them. What year is your dart?

@FierceMotorworks

6 ай бұрын

Its a 2015. Do you have a Dart?

@fallenone6

6 ай бұрын

@@FierceMotorworks yes I have a 2016

any idea how to remove seized dust cap on the bearing I tried on my dart same way with screwdriver and cant seem to get it off

@FierceMotorworks

2 жыл бұрын

You can try using penetrating fluid/WD40 to let it soak and possibly loosen the rust. You could also try a thinner screwdriver to wedge into the groove. And if those don't work, go ahead and destroy it to get it off. The metal is fairly thin, so if you hit it hard enough to bend the rim and break it free from the hub walls. Just make sure you can source a new one to replace after you're done.

@kanetao

2 жыл бұрын

The trick is to hammer a thinner screwdriver straight down between the ridge and the hub. It has to be thin enough, but don't pry (I snapped the tip). Once you get that initial 1mm gap then go around and tip the screwdriver back towards the rotor and hammer again while rotating. You should get to 2mm gap this way. A larger screwdriver should easily pry the rest of the way

Why is it always the passenger rear on the dart?

Anybody have a link to the proper spindle nut? Can't find any confirmation on the exact one and no stores around town even show on in their system to give me a part number.

@FierceMotorworks

Жыл бұрын

Are you able to get one from a dodge/chrysler dealership? That is where I got mine from. Price was reasonable.

Thank you!✨

Any tips on how to remove the bolts (using the 8mm) mine are super tight..

@FierceMotorworks

2 жыл бұрын

Use a penetrating fluid and let them soak (preferably a few hours for best results). Most important thing is not to strip the bolts/round it off otherwise it will be even harder to remove.

@willywonka969

2 жыл бұрын

@@FierceMotorworks thank you! I used a breaker bar to remove it. Then use red loctite red. Anyway thank you 😊

Where did you get the spindle nut from?

@FierceMotorworks

9 ай бұрын

Dealership. I don't think the regular auto parts stores had them (Autozone, Advance, O'Reillys)

It's a Mercury Capri

@FierceMotorworks

2 жыл бұрын

YES!! Congrats you are the first commenter to correctly guess what kind of car it is. Here are your bonus points...

Mazda miata

Hey there, do you still have this car? I have a few questions, and was hoping to pick your brain :)

@FierceMotorworks

2 жыл бұрын

Yep! Ask away

dont put your legs under the car l;ike that use a chair, i had that same jack you cant trust it