Great video and build. I just test drove a R/T in that same grey today. Hoping to make the purchase soon and you have given me alot of great ideas. subbed.

@super6charger501

4 жыл бұрын

RC-brand Thank you brother. That is awesome! the RT is a great car and has plenty of power. It is also a good platform to mod and take further if you wish. They also have a beautiful deep Hemi rumble too! Good luck on your purchase keep me informed of how you and the RT are doing. Hopefully you can soon show us some videos on it, can't wait to see her. Thanks for the sub brother!

This helps a lot, i just bought a sxt and am going to do this and this is so helpful

@super6charger501

4 жыл бұрын

Christian Jamison awesome man! Keep me informed of how everything works out.👍🏾

Good video think you touched every key point On these little gimmicks left after the install

Love the hood on this car; reminds me of the Viper.

@super6charger501

5 жыл бұрын

WizzyWhipitWonderful thank you brother, I agree. I love the way they transform the whole look.

Just made it to the channel. Your car is fire!

@super6charger501

5 жыл бұрын

OfficialKeith thanks brother!

Really looks nice man, great job! 👍🏾

@gswSD60

6 жыл бұрын

JayMac95 thanks man. I love that beast you got too, I’m excited about the RIPP!

@JayMac95

6 жыл бұрын

Super6 Charger haha thanks Greg, appreciate it. Sorry you have to wait so long to get yours done! I had to wait a good 2 months but worth it!

Good vid Looks Clean!! I might just hood swap my R/T

@super6charger501

5 жыл бұрын

Johnny Flores thanks man! Yeah it would totally change the look of your R/T. When you sit inside and look out over that bulge in the hood it just feels and looks so much more dominant and powerful, you'll love it!

I working on getting my front bumper I have the closure panel for the rear swap and I just ordered the front fog light brackets. Making sure I collect all the parts before I install it

@super6charger501

4 жыл бұрын

Whoa Weezy great! One step at a time. Sounds good, let me know if you have any questions.

Looks real good bro! I am in the process of redoing my R/T bumpers to SRT bumpers. Through knowledge and going to my local Dodge dealership.. you need to buy the closure panel for the SRT rear bumper. This piece EVERYONE forgets about and that’s why the valance does not clip into anything. The closure panel must be changed for that rear valance to snap in. Other than that, looks great!

@super6charger501

5 жыл бұрын

Andre Jones thanks bro! That R/T is going to look BA with the new bumpers. I'm definitely looking in to that closure panel, would like to install one, thanks so much!

@super6charger501

5 жыл бұрын

Thanks Andre, I installed that closure panel about a month ago and man what a difference. Thanks brother.

@validhemi

2 жыл бұрын

@@super6charger501 can you link the part number or let me know where u found it if u remember would help me a lot thx.

@super6charger501

2 жыл бұрын

@@validhemi I went to eBay and found the bumper. It’s really a Mopar OEM part so the number will be the same no matter where you get it. Just remember to select with or without sensor holes.

@ethancoffman8160

2 жыл бұрын

How did your rear bumper turn out ?

New rims and your car looks badass.

@super6charger501

5 жыл бұрын

Edgar L, Yeah I agree. It's going to be the final appearance mod on the car. Trying to determine what kind would look best.

Love the video bro the ride looks sickkk

@super6charger501

5 жыл бұрын

Oh thank you bro I appreciate it.

This looks damn good.

@super6charger501

5 жыл бұрын

LordFridge thank you brother! I finally added the power mod it needed to go with the appearance upgrades. Check those vids too! Thanks man.

Great video! Hope I can get my Charger soon.

@super6charger501

5 жыл бұрын

JaydenIV Thanks man, you'll get it!

Hell yeah keep that OE crosshair looks good with the hood.

@super6charger501

5 жыл бұрын

Thanks brother!

Love this video brother

@super6charger501

4 жыл бұрын

Foreihgn thanks so much brother, let me know if I can ever help you with anything else.👍🏾

Looks awesome man ! Just subbed :)

@super6charger501

6 жыл бұрын

Thanks bro I appreciate that! Back at cha!

@SF.Automotive

6 жыл бұрын

Super6 Charger 🙏🙏🙏 keep doing your thing and you will get up there ! I'm here to support

@super6charger501

6 жыл бұрын

Alright thank you so much! same here. I'm just glad to share anything I can about my car to those that want to do the same.

That charger is such a beauty

@super6charger501

6 жыл бұрын

Thanks so much man, I appreciate that. I absolutely adore this car myself. The funny thing is when I got it I told my wife I wasn't going to do anything to it. So much for that!

@littledemon6842

6 жыл бұрын

Lmao when you get a charger you’re not just gonna sit around and do nothing to it! Well bro! Good job man keep updating for the RIPP

@super6charger501

6 жыл бұрын

Terminator 684 will do brother.

Very nice, thinking of upgrading my hood too

@super6charger501

6 жыл бұрын

Thanks Tommy K, yeah man it does so much to the front of the car. What I didn't mention in the video is that I thought I ordered a Scat Pack hood but when I saw this one after I opened the box I was blown away! Definitely the Hellcat hood is the way to go.

@IceyCronusZen

6 жыл бұрын

Super6 Charger where did you find this hood?

@super6charger501

6 жыл бұрын

My hood came from moparpartsoverstock.com but you should be able to find it in several google locations and options. Easy to install too!

Will the exhaust tips line up once you install the SRT bumper?

I like the cross on the grille tbh

@deboss8998

4 жыл бұрын

only looks good on the older models

I'm doing the bumper swap this weekend if it ships in time.. Did you have to modify your exaughst do to the rear bumper ?

@super6charger501

6 жыл бұрын

Sorry for the late response Jhon, but the SRT style bumper uses the diffuser with the rounded holes for the round exhaust tips. I tried to put the screw-on tips onto the resonators w/o modifying the exhaust but they wouldn't stay on. So I did a resonator delete and added the nicer Borla weld-on rounded tips. I didn't care for the sound of the resonator delete so I went with the full PYPES exhaust system and have had no regrets, it sounds great! and looks good. So to answer your question, no if you try to use the stock diffuser (not sure if they fit the SRT style bumper). Yes if you want more sound with the new look. I hope this helps, good luck. Lemme know if I can help with anything else!

Did you have to drill the washer nozzle holes?

Great video man, I’ve got a 15’ charger Rallye and I’m definitely going to get that srt-style hood. My charger is red, and I’m thinking of just purchasing the hood as-is black and just keep black on red. What do you think?

@super6charger501

3 жыл бұрын

Thanks Chadi, that hood is going to look awesome on it, trust me. The black and red is a great contrast. The hood comes primed in a dull or matte finished black. Remember you’ll need the bezels as well. Keep me informed on how it’s going. moparpartsoverstock.com

I have r/t but with the v6 bumpers, i want to get the srt front bumper, so does will the v6 hood still fit or will i have to get the srt hood as well?

Do you still have that gap on your valance if so I have the part number and average Joe has the part number for the closure panel to fix that gap. Sorry didn't know you fixed it just saw your comment on it

Sorry I am so late to this. Your video helped me out so much an I thank you for it. I only did the rear bumper so far myself. So my only question to you is an im not sure if you had this problem as well. but the lower screw in the wheel well at the bottom of the bumper i believe it's the 7MM. How did you get yours to line up. I am having an a hard time getting the bracket to line up with the bumper. The 10MM at the top fit perfectly. Currently I am just running it without the bottom screw in it. Just wondering if you had this same issue as well. Thanks again for this video lots of good information like everyone said.

@super6charger501

2 жыл бұрын

Rob White I am so glad the video helped you. Yeah they can be a pickle to line up. I used the screws from O’Reily’s they fit perfectly and used mud flaps, drilled pilot holes in the flaps lined the hole up with the wheel well holes. Hope this helps.

That shit looking real fly G

@super6charger501

5 жыл бұрын

Thank you brother! Yes sir, and she's got that RIPP under the hood now.

@autotrimmers6353

5 жыл бұрын

Super6 Charger Damb that shits flying like an srt8 then

@super6charger501

5 жыл бұрын

Auto Trimmers LOL! Yes it’s capable of putting down 420+ to the ground, maybe a little more. Mine is carrying the basic HP tune it came with so it still needs to be tuned a little more to be just right. Some guys are cranking out close to 440 hp rear wheel with the right tune. Right now she will still fly tho!

Do you have too change the rear Vance & could you add a rear Differ to stop the flipping.for my self I would like to keep the old Vance is there any ..any way possible that could happen?like the look s of your.for a V6 that's a nice looking charger & now with those new rims too!

@super6charger501

4 жыл бұрын

Leo Sanders no you don’t have to change the rear diffuser unless you plan on having rounded tail pipes. The stock one should still fit the new bumper. I have since installed a factory part called a closure panel that fixed the flopping of the diffuser. Check my video on that. I’m loving the look too and can’t stop staring at the car with the new rims. 😂 thanks bro!

Did the hood need any adjustments to fit the curvature of the rest of the SXT front end? I’d like to do the same. Did it come with a heat shield? I live in New England

@super6charger501

4 жыл бұрын

Hi Rob, thanks for watching. No real major adjustments. The only thing you need to make sure of is before you fully tighten the hood down, check the alignment by closing it. Nothing major. No it didn't come with a heat shield. I don't use one now, didn't think it was necessary especially with the heat release vents in the Hellcat hood. Helps to keep the engine compartment cool. You'll have to order the bezels from ebay. You'll love and be so glad you changed the hood because it drastically changes the look of the car. Totally worth it!

The charger looks nice. Maybe I’ll luck up & see it in person 1 day. I’ve only got an SE but have just been making it mine. Where’d you go to install pipes? Did you order them or the shop had them?

@super6charger501

6 жыл бұрын

DriqBlaq thanks man, if you're ever in the ATL metro area let me know. Mine is an SE as well. I modded the catback exhaust system with PYPES and the tips are from Summit Racing. Rainbow Muffler in Mcdonough, GA did the installation.

@DriqBlaq

6 жыл бұрын

Super6 Charger most definitely. I’m currently in McDonough. I met a guy that works at summit with a discount but never knew summit had parts for my car because everything I wanted they didn’t have. & no way! That’s an SE? Nice brother. I’ve been looking at louvers, sunroof & hood but gotta do all my research. You should definitely add the luxe racelamp decal. It’s nice. Use promo code: workplaydrive to get it for $30 flat with shipping included

@super6charger501

6 жыл бұрын

DriqBlaq the only thing I got from Summit so far was my Spectre cold air intake and my exhaust tips. Everything else is from eBay or directly off the internet. Oh you're in Mcdonough? I'm in Stockbridge we're close! Just let me know whenever you want to see the car. I love sharing ideas with other Mopar guys. What color is your Charger?

@super6charger501

6 жыл бұрын

DriqBlaq thanks brother. I never heard of luxe racelamp decal tho what is it?

Hi GREGG, things are coming along so far! I have a question. I am not ready to do the exhaust system yet but I need new exhaust tips for the new valence. Can I get just the tips for now without upgrading the exhaust system?

@super6charger501

2 жыл бұрын

Hi Maria! Yes you can get just the tips welded on. You can delete the resonators and weld the tips on in place of them. It’ll give you a deeper tone sound too. If you want to keep your resonators I think they can weld the tips on to them. Ask the exhaust shop if that’s possible. Glad to hear everything is coming along. Keep me posted 👍🏾

It’s gonna be an unpopular opinion but I actually like the stock valance with the fake tips. Idk why but it’s something about it that I like. Now my question is if it’s possible to put the stock rt valance on a SRT rear bumper?

@super6charger501

4 жыл бұрын

SnakeheadGaming Oh no, it’s cool though. Everybody is different and have they’re own ideas about their own cars. In my opinion it should fit. I don’t think they are any different in that aspect. If you don’t already have one they’re not very expensive.

Car looks awesome man. Just bought an sxt the other day for my first car and i’m trying to add some mods. How much was it for your exhaust system and what all did you have installed?

@super6charger501

4 жыл бұрын

Lucas DeStefano thanks brother. Congratulations on your new ride! Welcome to the Mopar family. My exhaust is by Pypes with Street Pro mufflers SMC26 for 11’-14’ Charger but fit the 2015s and up just fine. I also have a resonator delete. I added some Borla resonated exhaust tips. They are 13” long and 4” opening. Don’t remember exactly how much I paid but somewhere around 400.

@lucasdestefano8009

4 жыл бұрын

Super6 Charger Alright sounds great man. Thank you I appreciate it.

@super6charger501

4 жыл бұрын

@@lucasdestefano8009 You're welcome. Oh! forgot to mention my set up has the SMC26S for street. They also have V for violator and R for race depending on how aggressive you want your sound. FYI

@lucasdestefano8009

4 жыл бұрын

Super6 Charger Yea i saw that when I looked it up on the website. Thanks for the tips!

Yessirrrr brother

Hey, quick question - are you able to reuse the rear Parksense sensors if you've had them previously and put them on the new bumper? (they have sensor holes)

@super6charger501

3 жыл бұрын

Yes, you should be able to transfer the old sensors to the new bumper.

@ANewPaul

3 жыл бұрын

@@super6charger501 thanks so much!

What are the best way to buy these bumpers? Straight through mopar or a different seller? Also do they come with the rear sensors

@super6charger501

5 жыл бұрын

Aylts Thunder Hi, the best way to go about it if you're concerned about price is to shop around and compare but usually the manufacturer is almost always going to be higher although its a more direct source. But I ordered mine from an eBay listing (seller) called carpartswholesale for less than $300 which proved to be a very reliable source with good shipping. I was also able to get the plastic exhaust rear valance from them as well, if you need it ($81.00). They do not come w/ the rear sensors, those are extra cost either from Mopar or another Googled source you may be able to find them. If your existing bumper has them already you should be able to add them to your new bumper, just get the bumper with the holes.

Hey bro, did the rear bumper fit without any issues? I ordered it from the same place you mentioned after seeing your video. How's the quality of the bumper? Is it same as the stock one?

@super6charger501

6 жыл бұрын

Zahki Ahmed yes it fits with no issues. Great quality, I took mine to Maaco to get painted.

@grizzlyman329

6 жыл бұрын

Super6 Charger thanks for the reply brother, I'm thinking about keeping my RT's lower valance and go with quad exhaust, I hope the RT's lower valance fits the scatpack's rear bumper.

Hey, do you mind putting a list of everything necessary to change the SE to the SRT front and back. I was under the impression I just needed to purchase the grille, bumpers and diffuser but the more I look into it; it seems as though there’s tons more I need to successfully convert.

@super6charger501

2 жыл бұрын

In addition to the front and rear SRT bumpers you’ll need the side rocker panels, hood and the spoiler. If you really want the look you’ll need lowering springs. I used Eibach Sportline. I also upgraded the radio to the 8.4 screen, love it! I may change my seats too.

@Von_SRT

2 жыл бұрын

@@super6charger501 did you get a wheel alignment after you added the sprints?

@super6charger501

2 жыл бұрын

@@Von_SRT Yes, but it wasn’t off much at all. Shouldn’t be an issue.

I got the same Set up on my RT I JUST ORDER ZL1ADDON FLAPS THO SAME COLOR AND EVERYTHING I NEED THAT HOOD THO... NICCEEEEEE

@super6charger501

5 жыл бұрын

DEATHSTROKE RT DC MARVEL2 Oh yeah those flaps are gonna look awesome bro. The hood will finish that aggressive look you want for sure. You can find it at moparpartsoverstock.com. The performance hood is the Hellcat style. I actually meant to order the Scat hood but when This one arrived I was like Oh Mannnnn! Yeah. Now the power finally matches the look with the supercharger. Thanks bro!

How did the two bezels fit in the rear bumper? Did it aligned correctly?

@super6charger501

6 жыл бұрын

MotorCity Mopar the bezels fit by way of snap in. There is a right and left side just make sure they're rotated to fit inside the hole on the right or the left. The clips are very firm so they fit snug.

Good video sir, you said those tips are 13" , are they 4" round or 3".

@super6charger501

4 жыл бұрын

joanben1977 thanks brother. The tips are 2.25” inlet and yes, 4” outlet. Thank you for watching.

fits the 06-10s also

@super6charger501

3 жыл бұрын

Rob MacDonald this particular bumper only fits 15 and up if I’m not mistaken.

What color is that exact grey

Where did you get your body kit from ? Rear bumper /Fromt bumper ?

@super6charger501

4 жыл бұрын

Famousjf I added everything over time. My spoiler is from Spoiler and Wing King, I got the rear bumper from eBay. The seller is carpartswholesale. The side skirts are from ikonmotorsports also from eBay. The front bumper is stock.

Can you change the bulb color on the FOG LIGHTS OR DO YOU HAVE TO SWAP THE WHOLE HOUSING

@super6charger501

5 жыл бұрын

When the kit arrived I just installed it. However I think that may be possible because in the rear of the housing I think you have access to the bulb not sure. From the looks in front when their on it looks like 3 bulbs.

Looks great, gotta be a way to secure the bumper underneath...no?

@mikeprobst1839

5 жыл бұрын

I mean the valence

@super6charger501

5 жыл бұрын

Right! Take a look at my Closure panel Installation video. Worked out great. Thanks for watching.

Hi Gregg, I am trying to swap the rear bumper and hood on my SXT! Your video was amazing and so detailed but I have couple of questions for you! Do I need to buy hardware for the bumper or they can use the old ones! I am going to get the side flaps and the bolts/pins someone suggested for the button valance! Do I nerd to change the mufflers or just the tips? Also do you know if I am going to have trouble with my moose warranty by adding mods? Thank you so much, o have been trying to do this for a while but I could not find any help, you covered everything in the video so well! Thank you so much! Maria

@super6charger501

2 жыл бұрын

Hi Maria! Thank you for watching my video, I’m so glad you found it helpful. I don’t remember any hardware coming with the rear bumper.You should be able to use the same pins and screws. It mostly just snaps into place. It’s held in by screws behind the taillights after you remove them. The rear valance will have round holes so you will need round tips. Mine are 4”. If you are not doing a full Catback exhaust, you sould delete your resonators and have the tips welded on. Although people often delete their mufflers too, I wasn’t a fan of that sound so I would keep my mufflers until I could find some better high flow ones. You will need a closure panel for the new valance which you can get from the dealership. I did a video on that installation too. No, your warranty should be fine as long as you don’t mod your engine, like supercharge it. Appearance mods won’t affect it. The hood I used the same bolts from the old one, worked perfectly. If you find you need extra pins or buttons you can easily order some from eBay or Amazon.

@mariasemeraro9125

2 жыл бұрын

Thank you

@mariasemeraro9125

2 жыл бұрын

Thank you sooo much! You explain things so well! I’ve learned a lot from you.

@super6charger501

2 жыл бұрын

@@mariasemeraro9125 oh btw my exhaust is from Pypes with the street pro mufflers. Love it! Borla and Corsa have some nice sound as well.

Can you please provide a link from where you got the mud guards and what you used to cut them?

@super6charger501

4 жыл бұрын

Johnathan Akpan teambeefcakeracing here’s the link www.teambeefcakeracing.com/jltsgfr-c15.html I think they only have front and rear set. When I bought mine a rear set only was available. You can use any small fine toothed saw with a thin blade. I used a hobby saw, any one will cut the plastic fairly easy. I found a small red hacksaw in Walmart that would also do the trick. Make sure you mark the mud flaps by placing them on the car and tracing them before you cut.

Looks so bold man. M planing to get one but considering did you have any problem during the rain or wash ? Will there alot of water going in to the engine bay? Will that cause the engine problem?

@super6charger501

5 жыл бұрын

Jianji Li thanks man. Go for it, it will add some real aggression to the look of your Charger! Yes there is water that will get into the engine bay with the Hellcat style hood. On the passenger side it wets the top of the ABS module which I simply bought an OEM cover for. It was rusting the screws on it but the cover took care of that. On the driver side if you have a cold air intake, your filter will get water on it. You’ll need some sort of cover for it too. I hadn’t seen one on line but I made one from the side of a bucket and wire ties, works great! See my other video RIPP kit 2 month review and update at around the 11:00 mark.

@super6charger501

5 жыл бұрын

Jianji Li if you still have the stock air box on your Charger water should not affect you. Some Chargers also came with the OEM abs cover too. Those are the only two areas to be concerned about.

@lijianji19910519

5 жыл бұрын

Thank you so much bro mine doesn't come with the abs cover and m gonna get one anyway and yeah m still using the stock air box. One more thing, what about the center scoop? Does that thing get water in too ?or just air ? Thank you so much for replying.

@super6charger501

5 жыл бұрын

@@lijianji19910519 Yes a little water gets through there too but only on your engine cover. I removed my cover after I installed the sc but it still gets a few harmless drops on top of the intake manifold. Either way You don't have to worry about water getting into the engine. The scoop is great for heat escape and extra air for the engine.

@lijianji19910519

5 жыл бұрын

Thank you so much for the information I will go for it next week . LOL helped a lot.bless

Sup boss, sick ride frfr🔥🔥 just got a 17 charger sxt. Plan on getting new bumbers. Can I ask for some mods?? 1. Where did you get the Front and Rear Bumbers?? How much were they?? Also, my girlfriend got me a spoiler, it’s not really on muscle cars, it’s a dope one too, but it’s not the same as everyone else with the same spoiler, I personally think the spoiler she got for me is sick, I haven’t really seen any muscle with this spoiler, it’s nothing special, it’s like a dual spoiler, about 4-5 inches up from the trunk. It’s just different. Do you think it’s weird for me to put a sport spoiler on my charger??

@super6charger501

5 жыл бұрын

congrats on the new whip.The rear bumper from carpartswholesale on ebay $284, my front bumper is stock but the hellcat hood is from moparpartsoverstock.com for $620. that spoiler sounds cool. the whole idea about modding your car is to try and be as different or original as possible. Yeah go for it!

@Libleeda42

5 жыл бұрын

Super6 Charger appreciate you brother!!! Stay blessed and continue the content bro🔥🔥🔥🔥

@super6charger501

5 жыл бұрын

@@Libleeda42 you're welcome brother. Hey man, let me know if i could help with anything else. Be blessed as well.

man you know the Srt front will make this car complete i wouldnt let those foglights stop you

@super6charger501

3 жыл бұрын

Yeah Danny, I know man the srt bumpers are a bad ass look. Not only my fogs stopping me but I also added some custom lip spoilers not seen in this video. Check it out. That SRT bumper keeps calling my name still. 😂😂😂

Where did you get your side skirts ? Your looks very nice great job 👍

@super6charger501

6 жыл бұрын

CASPER63074 thanks man. The side skirts cam from ikonmotorsports.com $199 for the set. These we're almost a $100 cheaper than other places I looked.

@CASPER63074

6 жыл бұрын

Thanks

Did you have to purchase any side support or wire harness

@super6charger501

4 жыл бұрын

Hemigang 57 No everything fits into stock rear end. Snaps into place and replace the push tabs back in and the tail lamp screws and you’re good.

For the mud flaps would I get the hellcat ones or RT ones. Because I’m looking at these on zl1addons. And I don’t know which one to get.What did you use to shape the mud flaps.

@super6charger501

6 жыл бұрын

I got the Hellcat ones from teambeefcakeracing.com. I held them against the bumper and traced the profile with a white grease pencil then very carefully cut them using a hand held electric jigsaw. You may want to sand them smooth once you cut them.

@super6charger501

6 жыл бұрын

I still need to sand mine.

Nice video...I wanted to change my hood but ppl on these videos are saying that there are gaps when the hood is closed and some were saying it wasn't closing all the way without getting a bracket...did you have these issues too?

@super6charger501

4 жыл бұрын

Owen S. makell thanks man. Yeah it’s a good idea it adds so much more of an aggressive appearance, I absolutely love mine. No I didn’t have those issues, I did it by myself and it worked out great. Maybe due to the fact that I got my hood from a Mopar parts factory instead of just an aftermarket retailer. So you may want to consider that. I made sure before I tightened the bolts to closed the hood and checked the alignment. Look into purchasing your hood from moparpartsoverstock.com they are manufactured to fit any Charger trim.

@owens.makell7681

4 жыл бұрын

@@super6charger501 thank you sir..I appreciate..I will check it out

@super6charger501

4 жыл бұрын

Owen S. makell you’re welcome. Hey check that link again I left out a c in overstock.

I see you! I’m from Henry county to!

@super6charger501

6 жыл бұрын

Jeremie Little what's up man!

@DriqBlaq

6 жыл бұрын

Jeremie Little as soon as I saw the plates I thought the same thing. Small world HCO neighbors

Hey boss question. How much did it cost you to paint the hood? I have the same color charger “17

@super6charger501

5 жыл бұрын

PharaohLoso215 The guy at the local paint shop charged me $250. However, it may vary depending on who you go to. Cool, I’m loving this granite crystal.

I know I’m late but where did you get your side skirts from.

@super6charger501

4 жыл бұрын

No problem. Ikonmotorsports.com

@brianlacey4643

4 жыл бұрын

Thank you

Awesome car ..... from where did u get bumpers ?

@super6charger501

4 жыл бұрын

Ander Toor thanks brother. I just got it from the eBay listing.

Links for your pipes. Nice looking

@super6charger501

3 жыл бұрын

EW, the Borla resonated tips to be are from summitracing.com. The Pypes catback exhaust can be found at jegs.com, pypes.com or summit as well. The part number for the Charger v6 is SMC26S. It will fit 11-15 and up body types.

Hi Gregg, Finally got everything I need except the mud flaps, they won’t be able to use what’s on now the sxt? The link you provided it’s not available and I don’t won’t to get the wrong one that I can’t cut out the way you sue it! Thank you so much!

@super6charger501

2 жыл бұрын

You’re very welcome. Sorry bout that, I’ll try to find another link for the flaps. When I do I’ll shoot it to you. Please keep me posted on the progress of the other parts and let me know if I can answer anything else.

@super6charger501

2 жыл бұрын

zl1addons.com/products/charger-srt-rock-guards?variant=27479586049&gclid=EAIaIQobChMI84O80LiN9wIVngaICR2xaQh9EAQYAyABEgK-r_D_BwE

@mariasemeraro9125

2 жыл бұрын

Thank you sooo much, I have all I need thanks to you! Going tomorrow to fix my An oil leak coming from oil filter housing, thankfully I have extended warranty, on the 19th swapping my rear bumper, then exhaust and tint my window.. the hood will be next :) you have been amazing, I am not longer intimated! Have a good weekend!

Nice

Nice i have a sxt the same color and im trying to add the same hood and rear end bumper. Where did you get them from?

@super6charger501

3 жыл бұрын

The hood I got from moparpartsoverstock.com and the rear bumper new from eBay.

@icypancho3689

3 жыл бұрын

@@super6charger501 thank you

Are the side skirts Dodge pieces? If so do u have the part numbers? Awesome videos and they are helping me a lot.

@gswSD60

6 жыл бұрын

AVG Joes Garage the side skirts are Dodge SRT replicas and not necessarily Dodge OEM part. They are from ikonmotorsports.com

@AVGJoesGarage

6 жыл бұрын

Thank you sir!

@super6charger501

6 жыл бұрын

Thanks so much man, Glad you're able to use them. I enjoy making videos that actually help people.

@TheShawn3636

6 жыл бұрын

Does the side skirts goes on top of the oem part

@AVGJoesGarage

6 жыл бұрын

Shawn Sykes they replace the stock part.

Do you have to change the exhaust for the bumper to fit

@super6charger501

4 жыл бұрын

Not necessary to change the bumper for the exhaust. However when you do get the exhaust, you won't need your resonators so the only other thing you'll need to modify is the diffuser for rounded exhaust tips. The rounded holes diffuser will fit any Charger bumper.

Nice car, I really want the hellcat hood! wish I could get a quote for it to get painted. How much roughly did you pay to get it painted if I may ask?

@super6charger501

5 жыл бұрын

Darnell Nelson Thanks Darnell. The guy at a local paint shop here in Georgia charged me $250 it was a decent job. I think you maybe could do a little better but you’ll need to do some leg work. It was cheaper and less hassle than doing it myself.

@Papicodone

5 жыл бұрын

Super6 Charger thank you for giving me an idea, hope to do this install next!

How do i find the correct paint? Got the same color as you do?

@super6charger501

3 жыл бұрын

You have to either order it online or find a custom auto paint store in your area. Some Sherwin Williams stores sell auto paint too. I got my paint from a store here in Riverdale , GA called Single Source. Your paint code is PAU.

Honestly my guy, as much as I loved the old style (from 15') front bumper, the new one grew on me so fucking fast.

@super6charger501

3 жыл бұрын

Yeah that new srt bumper from 15 and up IS bad ass! I love it, and still considering changing it.

@MisterJakeC

3 жыл бұрын

@@super6charger501 Hopefully you decide on it, would like to see it on you're channel!

What did you use to cover up your intake

@super6charger501

2 жыл бұрын

F8 Curt, the first thing I had on there was a curved rectangular piece of plastic I cut from an old 5 gallon bucket which was tied to the frame with some wire. Then I bought a filter cover that RIPP designed for their JK’s that keeps water, dust and mud off the filter. They’re on RIPP’s website.

what webiste did you buy the bumper

@super6charger501

4 жыл бұрын

Toki Anifowose I got off of eBay.

Hey boss I have 2016 dodge charger rt and have the oem rear bumper non srt, BUT I want to switch out for a 392 Scat pack rear bumper what am I going to need?

@super6charger501

5 жыл бұрын

Yeah man, all you'll need is the bumper with or without the sensor holes depending on your trim. The 2 black bezel inserts and the closure panel which you can pick up from your local dealer. Check my vid on the closure panel installation. That's It! You'll need to have it painted too. Mine costed me around $175 at Maaco and they did a very nice job. Hit me up if you need anything else.

@super6charger501

5 жыл бұрын

Oh Eduardo Bonilla, you'll also need the rear valance or diffuser . That black plastic piece that goes around the tailpipes if you want to change your tips to round. Otherwise the stock one should fit if you don't want to change your tips.

@wtfJorge11

4 жыл бұрын

Hey man i wanted to know instead of swapping the bumper from a scat pack or srt , would the grille from a scatpack/rt/srt fit onto the sxt model?

You have any problem with water getting in those vents on the hood?

@super6charger501

3 жыл бұрын

Yeah a minimal amount of water gets in but I have a breathable cover on my air filter and an ABS cover. So it’s no problem.

Hi i just have a doubt my 2016 rallye has sensor holes so do i need to order the bumper which has sensor holes or i can drill holes in the bumper if it’s without the holes?

@super6charger501

4 жыл бұрын

Hi Adnan. Its possible you may be able to drill them but for proper sensor fittment, alignment and headache I'd suggest getting the bumper with the holes already in it. I think they may be around the same price too.

@adnansiddiqui2016

4 жыл бұрын

Super6 Charger thanks a lot for the reply man. Will i be able to fit my old sensors?

What’s part number on side rocker panels

@super6charger501

2 жыл бұрын

Not sure of the part number but they should fit all Charger models 15 and up.

How much was it to paint the bumper? I live in Dekalb county what shop did u go to ?

@super6charger501

5 жыл бұрын

Rollaxkin Terry, I paid $175 The Maaco on hwy 138 in Stockbridge did the painting. They did a fantastic job.

How much did it cost you?

When i go to the sellers page you provided i only see the regular RT or SXT rear bumper for the piece you paid i need one too lol

@super6charger501

5 жыл бұрын

Here you go, try this one. www.ebay.com/itm/NEW-REAR-BUMPER-COVER-PRIMED-FOR-2015-2016-DODGE-CHARGER-CH1100A09-5PP51TZZAD/153071206221?fits=Year%3A2015%7CModel%3ACharger%7CMake%3ADodge&epid=6006316026&hash=item23a3c13f4d:g:-V4AAOSwVxpbNhJa:rk:3:pf:1&frcectupt=true

@BluuSmurf

5 жыл бұрын

Super6 Charger appreciate it

@super6charger501

5 жыл бұрын

@@BluuSmurf you're welcome brother.

Wasup homie how much the whole hellcat body kit hit u for and where u got it

@super6charger501

5 жыл бұрын

What's good Rico jackson. I did all of mine seperately. They do offer full SRT body kits for Chargers as a whole kit or package. For example, CarID has a Duraflex fiberglass full body kit for $600. Aluminum and plastic may be a bit more. My hood was $650, rear bumper $284, side skirts $200, rear spoiler $100. The kit would be much cheaper. Check out this link. www.carid.com/duraflex/hellcat-style-fiberglass-body-kit-unpainted-mpn-113222.html?view=257884&gclid=Cj0KCQjwg73kBRDVARIsAF-kEH_URhJy69mAl_cTnZicT0C9m9VkpxbiFlDfGI4GSdiz3oggvISqHV4aArbdEALw_wcB

Dodge has a part they call the diffuser that goes on the bottom to get rid of that wiggle. Let me know if you need a part number as I just did the same swap.

@super6charger501

5 жыл бұрын

T.T. Yeah man I need that part number. Thanks so much brother.

@t.t.6398

5 жыл бұрын

Bunch of numbers on the label, here it all is as written. MOPAR Genuine Part 0053364204-001 6826 7072 AC-001 It's called a "shield" on the package but on the Dodge illustrations of the SRT rear bumper it's called a "diffuser". Hope this helps you sir.

@super6charger501

5 жыл бұрын

@@t.t.6398 Yes sir! Thanks a bunch. Do have any video of your ride?

@t.t.6398

5 жыл бұрын

@@super6charger501 No. Sorry. I had issue's with pics of my car being available on line a few years ago. Since then I don't post any pics, videos all went away too. I'm friends with R/T Life, Ryan and have helped him with some of his mods. But I have a 16 GoMango orange Charger R/T blacktop edition with full SRT body swap. 20x9.5 Hellcat replica wheels in gloss black with 275's all around. AFE Momentum intake, 392 active intake manifold with MSD timer to run the SRV system. Hellcat exhaust manifolds and downpipes with 200 cell high flow cats, Solo cat back exhaust, Diablosport tuner and unlocked PCM, 3.09 LSD swapped rear, Mopar performance lower springs, tinted windows and taillights. 0-60 comes in 4.8 and a 1/4 mile in 12.8. If you need any help please feel free to ask here or go to Charger forum and look for me, my name is MangoMan. BTW, what mud flaps did you get?

@super6charger501

5 жыл бұрын

@@t.t.6398 oh ok cool, understandable. Love R/T Life and those guys.Wholy Smokes! what a beast You have there. Sounds like you've moded that baby to hurt a lot of feelings🤣. Good stuff. Mine now has a RIPP supercharger installed. I don't quite have precise dyno numbers because I couldn't get a true run due to the rear brakes wanting to lock up while spinning and front wheels still. My installer thought he tried everthing to turn it off but to no avail. I think it's putting down around 400whp or somewhere North of there. I'm taking it back soon. Hey man can you tell me what it may need to have done because it has some jerkiness in some of the gear changes. Not smooth at all.Tranny tune?

Did you have any alignment issues with the hood

@super6charger501

4 жыл бұрын

EVILB_392 CHICAGO IL No issues really. Just fits in perfectly.

The car is dope... u need 20" wheels on it tho. Those small wheels taking away from the work thats been done.

@super6charger501

4 жыл бұрын

Alpha Wolf thanks man. Yeah my new 20 inch wheels will be arriving in just a couple of days so stay tuned for a forthcoming video. Thanks for watching!

Question is that a 3in round pipe or 4in pipe

@super6charger501

5 жыл бұрын

2.25 inch inlet and 4 inch outlet.

How much did the fog lights cost? Did you install them yourself?

@super6charger501

6 жыл бұрын

MaskedEagle1 the fog lights came from seller Quirkparts on eBay for $294.19. Yeah my friend and I installed them but I had to take it to the dealer to activate them. Personally I think it's ridiculous to charge $150.00 for that. I had no choice. I think a Z automotive tazer might do it if you have one or know someone.

Looking for some more information. Want to swap my front bumper and hood on my RT. Where did you order these from? Cost? Did they come painted? Thanks brother looks great.

@super6charger501

5 жыл бұрын

Thanks Ayoukenn! My hood came from moparpartsoverstock.com for $650. I didn't change my front bumper but my rear bumper came from seller carpartswholesale on eBay. The rear bumper was $284 and the exhaust diffuser was $81. You have to get them painted yourself. Maaco did a very good job on my rear bumper and a small little paint shop did the hood, he did just Ok. It's totally up to you to choose a paint shop near you.

@XxAviciiLevels

5 жыл бұрын

Super6 Charger right on thanks. Did the rear bumper come ready to install? Plastic vents, clips, rivets etc. I'll definitely check out that eBay seller

@super6charger501

5 жыл бұрын

Yes it did. It is black primed plastic prior to painting that was simple to install using the existing screws, plugs and rivets of the stock bumper. Pull the plugs and a screw near the wheel wells and peel back the carpet behind the tail lamp and remove the screw(s) it pulls right off.

@super6charger501

5 жыл бұрын

The plastic vents can be purchased at the local Dodge dealership, I could not find them online.

@XxAviciiLevels

5 жыл бұрын

Super6 Charger awesome I found a good bumper. For the hood, did you buy any additional parts from that website? Hood insulation, clips etc. Or again did you use all existing hardware

How much did u get the srt bumper for bro? Nice whip

@super6charger501

4 жыл бұрын

machinegunnene thanks brother. I bought the bumper on eBay new. Around $389

Just got a 2019 SXT Charger I want to change out my hood and and back bumper is it anyway we can exchange number

@super6charger501

3 жыл бұрын

Derrick Daniels oh cool congratulations! Welcome to the Mopar family. You’re going to love it. Sure you can hit me up on IG and we’ll go from there at Super6_Charger.

How much did they charge you for the bumper color match ?

@super6charger501

6 жыл бұрын

N.B.A from what I remember I had Maaco do my bumper and they did a fantastic job and had the best price. I think it was about $175.

How do you call the bottom part where the muffler comes out ? I want to change mine to put some nice tips :P

@super6charger501

6 жыл бұрын

Phenorius that part is called the rear diffuser or valance. It is a snap on part that snaps into place on the bumper using plastic tabs attached to it.

@super6charger501

6 жыл бұрын

Phenorius You should be able to find that part separately either through Dodge or eBay. If you still have your resonators and want to keep them you could weld the tips onto that or modify your pipes.

Do you have a link from where you got the bumper?

@super6charger501

5 жыл бұрын

AC Monstrosity yes it's carpartswholesale from eBay. Don't forget the rear diffuser!

Side skirts are from ikonmotorsports.com

Where did you buy the side skirts ?

@super6charger501

2 жыл бұрын

www.vicrez.com/vicrez-srt-side-skirts-rocker-panels-vz102125-dodge-charger-2015-2016-2017-2018-2019-2020?tracking=vzgooglmer&gclid=EAIaIQobChMIvPu619Gj9AIVCuazCh2Ddw8rEAQYAyABEgLWWPD_BwE

Bro I live in the ATL and I got a 2012 charger and I want to add fog lights since mine doesn’t have any can you tell me where you ordered yours please ?

@super6charger501

4 жыл бұрын

Sid Bates hey brother! Yeah I ordered the kit from the ebay store. The name of the retailer is QuickParts. The kit will come with everything you need so make sure its the complete kit and not just the lights. You'll need a Z automotive tazer to activate them or need to take it to the dealer. The dealer charged me $150 and the tazer is $250 but gives you more uses and options.

@super6charger501

4 жыл бұрын

www.ebay.com/p/18023501947?iid=153171211477&chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=153171211477&targetid=807358027829&device=c&mktype=pla&googleloc=1015488&poi=&campaignid=8081083123&mkgroupid=84292526300&rlsatarget=pla-807358027829&abcId=1139466&merchantid=108565486&gclid=Cj0KCQiA5dPuBRCrARIsAJL7oej_pqdI4RQVSwFXlYShEumTw-2pC8eGzuUSE_YPDvp-1mKOzOwP2CsaAn9zEALw_wcB

@super6charger501

4 жыл бұрын

Sid Bates my mistake! You said 2012. Here ya go bro.www.1aauto.com/2011-14-dodge-charger-fog-light-kit/i/mplfp00006?f=962780&gclid=Cj0KCQiAiNnuBRD3ARIsAM8KmltcnjIASaLQ_iltt28N3UqOBIHL6NgwN33_hH0aTvd4YupWM4SsffYaAlQhEALw_wcB

I think you need part 68267072AC to keep the valance from hanging.

@super6charger501

4 жыл бұрын

G C I got it from my local dealer for $38 worked great.

Does it fit on 2013 charger

@super6charger501

3 жыл бұрын

Hey Troy unfortunately I don’t think it does. These particular bumpers are specifically for 15’ and up. Check out CARID and eBay for the 11’-14’ SRT 8 body kit and bumper.

I am about to order the Scat Pack Hood from MOPAR over stock is $741 plus chipping $200

@super6charger501

5 жыл бұрын

DODGE CHARGER 2016 CASPER63074 oh awesome man! Yeah that damn shipping cost tho. It's just what I paid too. You're going to love the look, people actually respect that more aggressive look! Some ppl move out the way.

@super6charger501

5 жыл бұрын

DODGE CHARGER 2016 CASPER63074 find a good shop to paint it. Don't forget to order the bezels too and installation was simple.

How much did you buy the bumper and the hood ?? (srt style)

@super6charger501

4 жыл бұрын

Tariq Alanzi the hood came from moparpartsoverstock.com and the bumper from eBay. The hood was 650 OEM SRT Hellcat hood and the bumper around 350.

Man I have a 17 RT and I want the Scat Pack style hood but I cant seem to find it...only the hellcat

@super6charger501

5 жыл бұрын

Malie Yeah The Hellcat hood seems to be the most popular. I wanted the Scat hood at first but when I saw the Hellcat hood in person it was all over. Try where I bought mine, moparpartsoverstock.com it’s call the functional hood. The Hellcat is the performance hood.

@vipautospanj7714

4 жыл бұрын

Did you have to do anything specific for hood fitment. Or did it just bolt on and fit perfect

Where did you get the bumper from

@super6charger501

3 жыл бұрын

Hey Robert here ya go www.discountbodyparts.com/catalog/feeds/Dodge/Charger/Replacement/Bumper_Cover/2018/SRT_392/REPD760158P.html?dbpcid=gglpla&gclid=EAIaIQobChMIu-eKqJr-7AIV9Ql9Ch3tyQmpEAQYCSABEgJNNPD_BwE&gclsrc=aw.ds

how much did the whole back bumper set up cost with the tips included?

@super6charger501

6 жыл бұрын

Ahmad Darjamal the Bumper was $284, the rear diffuser was $88 and the exhaust tips were $50 a piece.

@ahmaddarjamal1601

6 жыл бұрын

Thank you, Is there any way that you still have the link were u got the Bumber from?

@mrgetbitches4764

3 жыл бұрын

@@super6charger501 Where’d you get the bumper

Hi Gregg, Sorry I am bombarding you with questions. I am not having luck with the dealers! They are asking me for an srt vin number and I don’t have one. Do you know the part number of your rear bumper?

@super6charger501

2 жыл бұрын

Hi Maria! No problem at all, ask all the questions you need. I don’t understand why the dealer does this. I went by to ask about a srt front fascia for my car and he told me the same thing. I guess it’s only for major parts because when I was able to get the vent bezels and closure panel for the rear bumper no problem. There’s two options, one you can order online from a mopar parts site or eBay. My hood came from moparpartsoverstock.com and my rear bumper from eBay. Of course the con is you’ll have to pay shipping. The other is to go over to the sales lot and get a vin from one of those and provide them with that. Should work fine.