Harley needs to step up and put LEDs in all of their bikes.

Doc, a few months after I purchased my 2020 heritage classic back in 2020 I purchased Hogworkz led lights for the front and rear of my bike. When I installed them, the indicator would hyper flash even though the package said plug-in play, I couldn’t deal with the hyper flash so I took them out and put the regular bulbs back in, after watching many of your videos over the past few years I stumbled across this one, so I went out to the garage and installed the lights that I’ve been sitting on for the past three years, I turned the bike and the the four-way flashers on and walked away for a few minutes and was able to stop the hyper flashing, thanks for the info

@LowCountryHarleyDavidson

Ай бұрын

Thanks for posting your success story👍…..Doc

I highly recommend custom dynamics, great quality. Also just thought I'd mention, on the old mechanical flashers you can now buy a digital flasher with an adjustable screw to adjust the flash speed.

@LowCountryHarleyDavidson

8 ай бұрын

Thanks for adding your tech tip….Doc

Thanks Doc, always enjoy your videos. I bought a set with smoke caps PBYMT brand from Amazon, worked right out of the box before I saw your video on my 17 Limited.

@LowCountryHarleyDavidson

7 күн бұрын

Thanks for sharing….Doc

Custom Dynamics work fine

@tomb.8485

8 ай бұрын

Custom Dynamics works out of the box for me also on my 2018 Street Guide.

@Chevy243

6 ай бұрын

Will it work for a 2010 Street Glide?

@patrickhollis5332

4 ай бұрын

I do know one the 09 it’ll work but it’ll have that hyper flash unless you put those load eq on them I think up till 14 you have to use the load equalizer you don’t have to it’ll just flash fast in which it kinda gets your attention better I think when it’s faster

@sk8r4life92188

2 ай бұрын

You can reprogram your computer but resetting the bike. Look up video.

Plugged in Custom Dynamics and its all good. 2018 Heritage Softail.

I love the explanation from an expert I searched all over for why mine wouldn't learn with my Amazon specials this made so much sense thanks Doc great video

@LowCountryHarleyDavidson

8 ай бұрын

You are so welcome….Doc

2017 FLTUR Road Glide front turn signals used EagleLights with ferrite coils and works like a champ at a substantial cheaper price but still a high quality product

The first thing I do on purchase of a new Harley is to change out incandescent bulbs to LED. I consider it a safety issue because they don't burn out and are brighter. Custom dynamics have always worked for me and they have lifetime warranty.

@LowCountryHarleyDavidson

8 ай бұрын

Thanks for sharing….Doc

I put cheap Chinese LED's in my 2018 RKXS. They flashed really fast. My son instructed me to press and hold both turn signal buttons for 10 seconds. Worked like a charm.

@LowCountryHarleyDavidson

8 ай бұрын

Wow 😮…..Doc

Another reason why I tend to use OEM Fantastic explanations! 👍🏼🙏

I use Rogue Rider Industries for the front and back turn signals, It worked for me. The front turn signals are bright white when not flashing and blink amber/ white when enabled, so it is never totally off. Look Great

Agree with eric below, Custom Dynamics has the best quality aftermarket lights for Harley Davidson's. I used them for all my light upgrades and all continue to work flawlessly. As always, thanks Doc!!

😎👍 Big thumbs up for the channel...

@LowCountryHarleyDavidson

8 ай бұрын

Big thanks….Doc

I’ve got Custom Dynamics all around on my ‘21 Road Glide Limited, and added a bunch of extras. Couldn’t be easier and they look awesome. Plus, their warranty can’t be beat (I’ve used it).

Finally fixed, I spoke with Eagle lights about codes being sent & fast indicator flashing. They had a Gen 2 version that they sent me for FREE. I had gen 1, That immediately fixed the issue. Thanks for all the suggestions and reading my rambling on.🤓🤓

@LowCountryHarleyDavidson

7 ай бұрын

Good to hear….Doc

I have a 2016 ultra custom dynamics front and rear turn signals and tail light works great Easy to install Follow the directions to Program them

I am, and so many others out here, grateful tat your the one source that will give us the straight poop. Any theory as to why HD hasn't switched to LED? As always, Thanks.

Just did mine, cheap Amazon front switch-backs and rear flashers. No more hyperflash after 2 years, thanks Doc.

@Chevy243

6 ай бұрын

What lights did u go with? Trying to get Some for 2010 street glide

On my 2020 Tri Glide I replaced the rear 3157 incandescent bulbs with LED bulbs. that simply plugged in the existing socket. At first they worked a little weird but in short order they started to work fine. Didn't know about the learning process then.

Thank you Doc!! I wish Harley would have gone total LED a long time ago but oh well! Thanks for the video

I just changed the turn signals on my 2023 Street Bob for LED and I love them as they are much brighter than the stock incandescent bulbs. Some models offer additional features such as a pulsating mode for the brake lights and a running white light for the front turn signal. The only problem was getting the bulb into the socket (no problem with the incandescent bulb). Harley Davidson should make LED bulbs stick on all their bikes.

Good info Doc, love your straight to the point no nonsense videos. It has saved me a ton of money and headaches….Thanks….

@LowCountryHarleyDavidson

8 ай бұрын

Thank you Danial for the positive feedback…..Doc

Custom Dynamics worked for me as well. On my 2018 SGS and my 2012 Heritage Softail. Thanks Doc

I used the custom dynamics turn signals and the learning process worked on my '16 RG. I've been very pleased with them. Thanks for you great informative videos !

AdvanBlack's LED lights took a while, but my 2022 FXLRS learned them. I left the flashers on for about a half hour.

@annemarie172

2 ай бұрын

Happy to see it finally worked for you. I have a 23 Low Rider S and I've tried several times. The rear are working, but the fronts wont turn amber and blink, just stay white.During the hazard mode, they eventually turn amber, but when I've tried it after turning hazards off, they just stay white again. I'll try keeping it in hazard longer.

I always use Custom Dynamics LED's. I added them on my 2021 Ultra Limited. One day out riding, I got a check engine light. Called my dealership and after checking the coding, they said that I needed my BCM re-flashed. So just rode over to my dealership and they re-flashed it and no issues since.

It worked with my CD led blinkers in the front. Thanks Doc! ETA: 2016 Ultra Classic.

found out the hard way about this. 21 heritage change out turn signals with regular led bulbs. had the fast flash on turn signal indicator. didn't think much about it. then one day my bike stalled and wouldn't let me start it till about 3 min. happened twice. it was under warranty so I took it in. and found out that it was throwing low voltage codes. after clearing codes and putting back original bulbs, bike ran fine. now I bought Harley led turn signals and had same issues with codes. went on line, and on the custom dynamics website showed how to sync. wish Harley would let customers know about the sync in instructions. thanks for the video

Rogue Rider Industries, plug 'n play, LED turn signals worked with learning module. Good product, reasonable value.

I have installed Custom Dynamics, Advanblack and Eagle lights without any issue.

I have an fxlrst and put the hd led turn signals in the front (the ones with the halo). They look awesome and the only way installation could have been easier was if they installed themselves. The rear ones though I wanted the hd ones but the service manager said the connector they come with sucks and they solder the connections and do it correctly but it’s also a $300 job (or so). I went with the custom dynamics on the rear. Had to go through a similar learning process if I recall.

@LowCountryHarleyDavidson

8 ай бұрын

Thanks for sharing your experience….Doc

Thanks Doc , fitted Ciro3D Fangs all Around on my 22 Ultra let it learn flashing speed of indicators corrected but dash indication is still quick. Dealer tried but unsuccessful. No big issue but something going on ?👍🏻🇦🇺

@stevenmcdaniel439

8 ай бұрын

I have the same issue with my 2019 road glide I don’t think it learned all of the lights

I recently had to replace my turn signal module (the red and black box next to the flasher). It was $100 aftermarket and $300 genuine Parts. Still using incandescent bulbs. The aftermarket module is working fine.

Great video and great stuff. When I put on custom dynamics saddlebag lights and turn signal eliminator kit, mine acted up at first but I followed custom dynamics instructions for “teaching” them and I haven’t had a problem since. The process Harley gave didn’t work, for the reasons you state in the video. I used the custom dynamics process and they work perfect. But important to note that BCM bikes shouldn’t need any kind of stabilizer as you point out.

@LowCountryHarleyDavidson

8 ай бұрын

Thanks for sharing your experience…..Doc

Ciro and Custom Dynamics also work this way. I installed them on my 2021 FLHTK

I run Custom Dynamics front and rear LEDs throughout and have not had any issues on my 20 FLHXS.

Learning works fine on my 2017 FLHTRU with custom dynamics LED / two color - white/yellow turn signals AND with CIRO Horizon LED Lighted Windshield Trim (white to yellow with turn signals)

I guess I’m lucky I put led turn signal bulbs on my 2003 ultra classic and on my 2022 tri glide and did not put a resistor on the 03 and have not had any problem with either one.

Doc, I put Sylvania Zevo Led bulbs ( 3157R) in the rear lights on my 21 FLRT, I went thru the relearn you showed and they work like a charm

@LowCountryHarleyDavidson

8 ай бұрын

Good news👍….Doc

On my 2012 can-bus Dyna I replaced the rear headlamp first with a cheap chinese model having integrated turn signals. Plug and play, not an issue. Then I replaced the headlamp with a cheap chinese model, and again, plug and play, not an issue. Finally I went with Drag Specialties front turn signals and they flash correctly, what do not work are the green indicators on my dash: hyperflashing when turning left or right, flashing correctly in hazard mode. Tried many times before this video the learning procedure, without any luck

Works with Ciro. Love your videos.

@LowCountryHarleyDavidson

8 ай бұрын

Cool, thanks….Doc

Hello Doctor. As always, thank you very much for your advice. I have installed a turn signal with LED bulb in the headlights. My 2021 HD Street Bob 114 has correctly detected the LED. Greetings from Madrid, Spain.

@LowCountryHarleyDavidson

Ай бұрын

Thank you for your post. I am always amazed how far our videos reach….Doc

Always great advise and recommendations.. Thanks DOC!

@LowCountryHarleyDavidson

8 ай бұрын

I appreciate your support…Doc

One of the first thing I changed was removing the incandescent lights. Replaced them with LED! 🏍💨🏍💨

Great explanation Doc👏

2018 FXLR, just put aftermarket ones, can't remember the brand (USA) but I was told just plug and play and they'll work proper good. Which they did and I was happy at half thr HD price. BTW, it's the end of 2023 and the non-HD LEDs are still going strong.

7:27 I've got LED on my front turn signel left rear a lone it done hyper flash rear bulbs got enough curant draw to keep it from hyper flashing put leds in the rear it will on my 09 sportster 1200c

Got the Harley led turn signals with halo as running lights and amber as turn signals and look and working great… also led rear lights for break and turn and just work and look great as well…just having custom dynamics “fog” lights put on the mustache front engine guards that are also halo when used as running lights and able to switch to full white spots at night to help keep the road visible… will see(literally haha) how they work when I pick up my bike soon but, anticipate they will work great… too bad Harley does not make a single product….

@LowCountryHarleyDavidson

5 ай бұрын

I’m sure you have made many at Custom Dynamic very happy…..Doc

Thanks Doc ! I have a 2012 FLHTK and have LED bulbs for brake and running lights. I have an LED headlight and passing lights . I have been wanting to add LED blinkers. I have an understanding I need a load equalizer for the blinkers. I hope to install them soon!

My 2023 lowrider st just got Custom dynamic in the front and it blinked correctly from the start.

Love my Custom Dynamics

@Birdoneful

8 ай бұрын

Sometimes the turn signal indicators flash fast but not all the time the lights all flash normally

Rogue Rider Industries for my front and rear turn signals on a 2018 Slim. Just let the emergency flashers run for a minute or two without starting the engine. Then give them a test and usually you’re good. If not repeat the learning process.

I previously had custom dynamics front & rear with the triple play device. With them same issue only the red indicator would flash while driving, intermittently. HD dealer was not able to repair it, after replacing bum & elm. They put incandescent back on . Custom dynamics offered me a 5% discount for replacements. If learning does not work, I will probably live with sync issue. I’d Rather have the extra visibility ,Running Eagle lights now.

I got led on the front of my 09 dyna and 08 street glide and the hyper flashed about 5 tines and just worked normal after that.

Good information.

It is very useful! From Russia with love!

@LowCountryHarleyDavidson

8 ай бұрын

Awesome! Thank you for watching from across the globe….Doc

This video was useful, thanks for the info

@LowCountryHarleyDavidson

8 ай бұрын

Thanks TJ for watching….Doc

I put Custom Dynamic all over the rear end of my ‘17 Ultra. They work perfectly

Hi Doc I love your videos I’m doing a full frame restoration on a 1987 Harley Davidson fxrs and I converted all the turn signals to led I’m running an Badlands turn signal conciliators hard wire by their instructions it the issue I’m having is both of my front turn signals are flashing at the same time when either bottom are press but my rears are working just fine any idea on what it can be would love help please

@LowCountryHarleyDavidson

6 ай бұрын

In 1987 the front turn signals used the mounts for grounds. The rubber handlebars mounts had a ground wire to the frame. The buttons supply the positive. Check your ground….Doc

@luisabreu2457

6 ай бұрын

@@LowCountryHarleyDavidson There’s is grounds there’s is a big ground underneath the frame that goes to transmission and there’s also 2 more grounds next to the rear break resavoir and there’s 2 more grounds in the top 3 triple trees cause my bike comes with the dual speedo you telling me one of them grounds is causing my led turn signals to both flash at the same time?

I bought some rear flashers from Harley and I guess I didn't read the instructions. But, they are working just fine. (2014 flhxs)

My bikes are a little older. Custom Dynamics on my Electraglide with Smart Tripple play and load stabilizer, and Hogworkz headlight and signal lights with Custom Dynamics tail light and smart triple play and load stabilizer on my Sportster.

@LowCountryHarleyDavidson

8 ай бұрын

Wow! How did you figure out that needed combo?…..Doc

Great video. I am having trouble with headlight projection on my 2002 Fatboy. Can I replace the LED headlight bulbs with halogen bulbs or does it require any special wiring? Thanks.

@LowCountryHarleyDavidson

8 ай бұрын

I believe an adapter is needed….Doc

@bradwilliams4921

8 ай бұрын

@@LowCountryHarleyDavidson thanks Doc

It works. Don’t be fooled. I’m a Harley mechanic. It’s a ploy so do it at home on any LED as long as it’s a newer year

@LowCountryHarleyDavidson

8 ай бұрын

Thank you for joining and watching our videos…..Doc

I had the same problem with thinking the ball was blowed until I found 8 1/2 Watt bulb works fine and brighter too

Great info.

Thanks Doc I'm putting LED turn signals on my 2017 street glide and was told at my dealer I just to put them in and I'm ready to go. Do I still have let the system learn?

@LowCountryHarleyDavidson

8 ай бұрын

I believe so….Doc

Hey Doc ! Thank you for your great channel ! Please recommend a book about full maintenance HD Fat Boy 2007

@LowCountryHarleyDavidson

5 ай бұрын

I fully endorse Harley-Davidson’s Factory Service Manual. With this you can keep your favorite ride on the road👍…..Doc

@ihorispolatov1884

5 ай бұрын

@@LowCountryHarleyDavidson thank you Doc 🫡

I decided to go with custom dynamics. It's plug and play

Great video..... I went to the early LED turn signals from harley on my 08 flhtc. Works very well. Just not the newest style. Would love to have the bright white to amber look. Now i have the Daymaker harley light for head and spots. They fog up. Doesnt hurt the output but looks wierd. Heard of any fixes for that?

@LowCountryHarleyDavidson

8 ай бұрын

For LED no, all others look for my headlight cleaning video….Doc

love your channel ,2014 Electra glide police, police removed their red and blue passing lamps, trying to reinstall stock LED's, I haven't found why I have no passing lamps just turn signals and hazard lights, would be nice to tie into a switch or connect with head light switch/high beams, I'm new to this have any ideas?

@LowCountryHarleyDavidson

5 ай бұрын

Police have a flasher under the left side cover. Remove flasher. Soldier all three wires together. Then use the right Pursuit switch to turn the spot lamps on and off….Doc

Thanks Legend.👍

Brought bike back to harley dealer for LED Issue. They connected it to Digital teck thing and made a change there. Told me it would take a while for it to learn LED's. Did about a 75 mile ride today with many turns using signals. No change yet, still fast on dash, regular speed on led. However 4 way flashers are all in sync with dash at regular speed. Not sure how long this relearn takes, Still giving LT & RT signal codes, Dunno.

@LowCountryHarleyDavidson

7 ай бұрын

Something is not right. I don’t believe the BCM can learn while riding….Doc

@DennisD9799

7 ай бұрын

Dunno, Been going to Eastside Harley in Bellevue,Wa. Purchased bike used there.

G'day, Doc hope your doing ok, i have a 2022 fatboy which has led's in the rear and bulbs in the front im thinking of putting led's in the front,will i have to train the bcm?,cheers from Australia

@LowCountryHarleyDavidson

6 ай бұрын

Yes….Doc

Doc I have a Dyna street Bob 2013 if i add the LED turn signals do I need to add a resister too.Thank you

@LowCountryHarleyDavidson

Ай бұрын

Your bike is during HD changing wiring for the 2014 year. If your bike still has a TSM then yes….Doc

@recondoc3034

Ай бұрын

@@LowCountryHarleyDavidson Thank you sir

You can get 6 ohm 50 watt resistors and put one in parallel to each LED if you're working with an older bike.

@LowCountryHarleyDavidson

8 ай бұрын

Thanks for this tech tip. Oh how I miss Radio Shack…..Doc

I upgraded our 2022 Softail Standards to genuine HD front and rear LEDs. They are great but no where in the installation sheet did HD describe the process for the BCM to learn the new lights. I couldn’t figure out why I kept getting BCM codes on both bikes for the lights and rapid flashing. Internet search found what was happening and the learn process what to do….good to go now but come on HD…😂😂

Will installing after market led signal lights cause the engine light to stay on? That's what seems to have happened to me. I wasn't aware of the fact that you can't use aftermarket led lights until I just saw your video. Mine are in the mirror stems which harley probably doesn't sell.

@LowCountryHarleyDavidson

6 ай бұрын

Yes the Body Control Module will light up an icon thinking the turn signals are not functioning…..Doc

@nealmoyer7216

6 ай бұрын

@LowCountryHarleyDavidson thanks, is there a way to have my tuner turn off that code , I have techno research delphi tuner.

Lets talk about why these led lights are not stock.

@LowCountryHarleyDavidson

8 ай бұрын

😆 got to use up old stock…..Doc

How about an after market LED 3157 brake strobe/flashing bulb in a 2014 Road King? Getting the b2161 code. Do the same procedure but zip tie the brake lever? Thanks

@LowCountryHarleyDavidson

4 ай бұрын

Nope. That’s a totally different circuit….Doc

@bigblue3568

4 ай бұрын

@@LowCountryHarleyDavidson thanks... tried it prior to your answer. Didn't work.. lol Just put OEM bulb back in waiting on Harley Auxiliary Brake Light/Running/ Turn conversion kit to get some more RED light on the back.

I replaced my turn signal/brake lights on my 2015 Harley breakout and with doing that the turn signals work fine but the brake lights don’t work at all now. Any ideas?

@LowCountryHarleyDavidson

Ай бұрын

I would first retrace my steps. Put the old bulbs in everything work? Front and rear brake tested. If so the Body Control Module may not be able to recognize the LED replacement for brakes and turn….Doc

Doc, I have a 2008 Road King if I switch to LED turn signals where is the best place to put the load equalizer

@LowCountryHarleyDavidson

4 ай бұрын

At the rear light connector…..Doc

06 Electra glide ultra, had HogWorz install all the leds at Daytona (shawn) including the load balancer was fine when I left Later I get the rapid flashing and the red key on

@LowCountryHarleyDavidson

8 ай бұрын

Ooops…..Doc

@garyzanghi9272

8 ай бұрын

@@LowCountryHarleyDavidson guess I'll have to try to reset the Balancer

HOGWORKZ LED replacements work well too.

Question…I have a 2021 Tri Glide Ultra. I currently leave my Trike on a Battery Tender when the Trike is not being riden. I’ve heard that leaving it on a Tender continuously is not good for the Trike’s electrical system. Can you help me better understand this? Thanks.

@LowCountryHarleyDavidson

8 ай бұрын

In the past the “Tenders” were simple with no electronics to monitor the battery. Our modern Tenders have mini computers that will only charge when needed to keep the battery at optimum performance. Todays Harley have so much electronics that drain the battery that it is almost mandatory to have a tender! Many have reported leaving there bikes in the cold garage for 2-3 weeks and not being able to start….Doc

Doc does Harley have plug and go rear led turn signals for a 2017 street glide if so what is the part no. Thanks

@LowCountryHarleyDavidson

5 ай бұрын

Yes. Too many of choices to give a part number. Swing by your local dealer or go on line to Harley’s web site….Doc

Thanks

So what do I use for turn signals in the front and rear?? 2010 street glide flhx thanks

@LowCountryHarleyDavidson

6 ай бұрын

I don’t keep a Parts and Accessories catalog on me. But I’m sure there are plenty of suggestions here….Doc

Never had any problems with Ciro LED when I added them to both my '14 Street Glide and '17 Road King but didn'thit the 4-ways, just straightupplug and play, but then again, Ciro isn't exactly cheap. Chinese made stuff.

What's the best way to jumpstart my motorcycle ?

@LowCountryHarleyDavidson

8 ай бұрын

I am sorry but I do not promote “jump starting” unless mandatory to get home. A jump box is better than with a car…..Doc

i have a 13 heritage with the incondesent bulbs on the turn signals, would i be able to switch to LED and do the learning flash to get the LED to work properly?

@LowCountryHarleyDavidson

8 ай бұрын

Unknown since you have not supplied model. Pre 2014 touring models no…Doc

@beauxdutaman7450

8 ай бұрын

ok tnx @@LowCountryHarleyDavidson

Had Hog Workz 2:06 LED lights in 2006 ultra Including a load balancer. A month later the turn signals started doing that rapid flashing? Now what ?

@LowCountryHarleyDavidson

2 ай бұрын

First check all light assemblies. 1 down will change resistance. If all are good then check the terrible scotch locks that came with product…..Doc

@garyzanghi9272

2 ай бұрын

@@LowCountryHarleyDavidson all plug and play but i will clean up the connections

Question. Will allowing LEDs to fast flash cause any damage to the electrical system? My theory is that the fast flash is more eye catching, similar to pulsating brake lights. If it catches other driver's attention and causes no damage, is there any reason that I can't run them that way? If someone comments that they look weird, my response will be, "But you saw me, right?" :D

@LowCountryHarleyDavidson

4 ай бұрын

Depends on how new your bike is. After a while the BCM will get annoyed and start flashing the Red dot…..Doc

@PaulBudge

4 ай бұрын

@@LowCountryHarleyDavidson Thanks Doc. I should have specified, 2012 FLHTCU.

Installed Harley LED saddlebag filler turn signals on my 2016 Road King to replace the original turn signals. The rear emergency flashers turn off (front continue to work) when you turn off the ignition. EGM programming solution or is it a hard wire fix? Can't fix hyper flashing because of this too. Thanks

@LowCountryHarleyDavidson

4 ай бұрын

I need to know if you have LED front turn signals too. If so, I believe a trip to the dealer is necessary ( cause the BCM wasn’t that smart to learn🤦‍♂️)….Doc

The details of the new Harley Signature LED turn signals say they won't work on my 2011 Street Glide CVO - is that true? I have Custom Dynamics LEDS in there now and they work fine. Would like to swap them out for the Harley Signature LED signals.

@LowCountryHarleyDavidson

8 ай бұрын

Either HD has not tested this LED on a 2011 or the light is not compatible with the TSM…..Doc

@jamzcl

7 ай бұрын

@@LowCountryHarleyDavidson took a chance and bought the lights and they work fine on my 2011 Street Glide CVO.

ok Doc, I've got a 1991 FLHTCU, when I install the back ones only , my turn signals function correctly, but when I add the front(with halo white and amber turn) I get nothing, they turn on, but do not flash, unless of course I hit the 4-ways, then all flash as there are suppose to do, HELP ME PLEASE..just what do I have to do to get these to function correctly, oh yeah as a side bar I installed a load equalizer on the rear directionals, no help there either same problem..I looked at ever forum, youtube..no one seems to have had this problem on an old ride, but I love my evo and I just need a little assistance here please

@LowCountryHarleyDavidson

3 ай бұрын

I got to ask. Your turn signals were working with the incandescent bulbs? I highly suggest emailing NAMZ company. They are the best when it comes to wiring….Doc

@Hddriver1

3 ай бұрын

@@LowCountryHarleyDavidson yes sir, everything worked just peachy, like I said, I installed the back LED's, turned on the key, everything functioned as normal, install a load equalizer, then put in the 1157 LED's for the front..I only get flashing when I hit the 4 way hazards..turn signals light up but they do not blink..then I take out the front 1157's and put the standard incandescent bulbs back in the front and leave the rear LED's in...they all function correctly..I'm at a total loss brother

On my 2011 fatboy LEDs look great, function perfectly, but i keep getting " blown brake light" or "blown turn signal" codes in my ECU. Makes the red security light stay on at all times. Any ideas?

@LowCountryHarleyDavidson

8 ай бұрын

The brake light has different resistance do the brain thinks CV it’s out which will turn on the red light…..Doc

What years are the old ones and what years are the new ones

@LowCountryHarleyDavidson

8 ай бұрын

Learning BCM 2014 and later Touring and Sportsters, 2012 - later Dyna, 2011 and later Softail. ….Doc

Radiantz works with my 2019 Street Glide Special

@pericreticos

8 ай бұрын

Hello, I am looking at buying the Radiantz Leverz,..if these are what you have are you happy with them? Thank you.

@jamessmoth8683

8 ай бұрын

@@pericreticos I don't have those, I have just the standard 1157 replacement LED units.

@pericreticos

8 ай бұрын

Thanks for your quick response..All the best. @@jamessmoth8683

I have a 2006 Dyna lowrider. I put the LED turn signals in and it’s throwing codes and making the little red light go on. What do I need to do to make it normal?

@LowCountryHarleyDavidson

5 ай бұрын

Need to add a load equalizer. Check on line in Drag Specialties….Doc