do88 Intercooler Install in 2019 Golf R (MK7.5)

Yes... there was some cutting involved!
Here's the intercooler I installed:
www.do88.se/en/artiklar/audi-...
Here are the two other videos I referenced:
Paul: • Intercooler Install on...
Charles: • Intercooler Upgrade an...
Please SUBSCRIBE, COMMENT, and LIKE this video if you found it helpful! Thanks! everythingcpo.com

Пікірлер: 21

  • @tredfxman
    @tredfxman2 жыл бұрын

    WoW! Extremely instructive show off here! If i ever go Stage 2 ECU tune on my GTI Clubsport MK7 ill prob get this do88 & definetly be saving your video to watch later! 👍 Im Stage 1 BSR ECU now, and thinking of going Stage 2+ DSG tune by TVS Engineering! Iv been thinking if i should go Stage 2 ECU tune from them also, but im happy with BSR and theyr a big name (safe tuner), so we will see. Also TVS does not require you to have same ECU tune as them, for their DSG tune any ECU brand should work! Anyhow i see relability as the most important, so ill wait a bit & think a couple of times before making up my mind 🙂

  • @hunterbrink9346
    @hunterbrink93462 жыл бұрын

    wow this makes me a lot more confident in doing this myself, thanks!

  • @BJW3Run
    @BJW3Run7 ай бұрын

    I need to fit my DO88! I’ve been putting it off for weeks… 🤣 seems like a lot of stuff to do for a non visual change 💯

  • @061garage
    @061garage Жыл бұрын

    Great vid 👌

  • @MTLJack
    @MTLJack11 ай бұрын

    thank you for the video. I have watched 4-5 of them and this is by far the easiest way and you don't have to drain out the cool and the expensive volkswagen / audi coolant.

  • @KasamS
    @KasamS Жыл бұрын

    How long did the install take? Plan on doing this aswell as a new ac condensor

  • @apache4541
    @apache454112 күн бұрын

    But Remember stock location intercooler goes between radiator and condenser is a hot sandwich , What are you think?

  • @The_W_
    @The_W_ Жыл бұрын

    Hey, just did this on my mk7.5 gti and i noticed my passenger side headlight is a bit lower (the red trim doesn't align - white/chrome one on the R). Any idea why? Haven't played with any alignment nuts (the big one that lets you change the headlight height, with a thin every long screw inside that holds everything -> should i try to use this one to raise the whole headlight from the insides?). Not sure anywhere else where the headlight can change its position. Thank you, very detailed video

  • @emanueldumitru6477

    @emanueldumitru6477

    Жыл бұрын

    Hey! My headlights are also lower. Both of them. Did you solve?

  • @dsteve2214

    @dsteve2214

    Жыл бұрын

    ​@emanueldumitru6477 I recently did my intercooler as well, and what I did, was I held up the headlight while it was still loose and then tightened the bolts on the fender side and have no fitment issues

  • @goodsmoke7412
    @goodsmoke74122 жыл бұрын

    What gearbox did this car have ? Manuall or dsg?

  • @EVERYTHINGcpo

    @EVERYTHINGcpo

    2 жыл бұрын

    DSG

  • @ivdubgti
    @ivdubgti Жыл бұрын

    And yup taking it to the shop. LOL

  • @brandonnguyen146
    @brandonnguyen146 Жыл бұрын

    Did you ever have to re calibrate your front radar sensor behind the grille since you unplugged it?

  • @Mental_Toss_Flycoon

    @Mental_Toss_Flycoon

    Жыл бұрын

    Was hoping to find out the same.

  • @_Sparsic_

    @_Sparsic_

    Жыл бұрын

    Not required, I've taken my grille+bumper off more than 10 times and the radar never posed an issue when driving afterwards

  • @MTLJack

    @MTLJack

    11 ай бұрын

    i doubt the volkswagen is this high tech, requiring calibration of a radar sensor.

  • @JETLImk7

    @JETLImk7

    11 ай бұрын

    @@MTLJack it is required to be calibrated, but I'm not sure what might trigger it. Possibly a crash or a replacement of the sensor.

  • @j255c
    @j255c2 жыл бұрын

    Any noticeable difference in IATs?

  • @onelowvdub
    @onelowvdub9 ай бұрын

    this is the longest way to do it . follow humble mechanic video I had my stock Intercooler out in 30 mins ... probably could have had the whole job done in an hour

  • @stobsie

    @stobsie

    2 ай бұрын

    It may well be the longer of the two methods but if you don’t have a vacuum bleeder to refill your coolant afterwards removal from the front is going to be the best way.