Thank you very much for explanation!!!

Thanks very uselful. I just followed exactly what that person asked that you do same job twice. It gone loss because the back was not expanded well. Thanks

Well done ...just hope I can get them here in the USA: off to HD!

From experience, always use the setting tool to correctly use these anchors. Using the power driver to set them can allow the whole anchor to spin and leave you with a hole bigger than you can use.

@FelixBank

7 жыл бұрын

My DeWalt on lowest torque setting never spins the anchors and they set flush. There are fancy tools you can use to seat them but I don't have one.

@inquisitive1911

2 жыл бұрын

@@FelixBank Not fancy. - £12 out of Screwfix. - The setting tool gun will help you heaps more. Thanks. Love from Scotland, X.

You are meant to use the the hollow wall anchor setting tool. Far quicker and create a flush grip.

@grahamscott1547

Жыл бұрын

Yes, I agree! I bought a setting tool with anchors for my large mirrors and were fantastic but can someone please help me, I’ve been trying to use the same thing to put up my floating shelves but they just keep spinning out and refuse to tighten, I’m beside myself with trying everything to fix it and I just don’t get it!? Can someone please help?? I’d be ever so grateful 😇

@TheF1uffyOne.50

Жыл бұрын

@@grahamscott1547 either you are using the wrong collar length anchors so they are not gripping or screws are too short...but without seeing I don't know for sure.

Use the setting tool!!!

great video - just want to say I have used these for years but always choose genuine Molly fixings - beware of cheaper alternatives - never had one failure - viewers trust me... even if you only have one or two of these to fix... it's well worth buying and using the proper setting tool for peace of mind and a guaranteed result

@FelixBank

6 жыл бұрын

Great Advice! I will be buying a proper setting tool when I have to use these next time. Makes it much easier. And you have to know what your doing if you use a drill to set them.

Good to know

Hi will these hold up a 43 inch tele on a hollow wall?

I'll use the metal one's next time! Why they made my apartment building in brick is beyond me? Walls are supposedly dry wall unless these something cheaper? I can hear the guy snoring under me! How builders get away with this is a mystery guess in rual areas no one is around to check the work as it's being made? Ventilation goes to the attic cold air return brings me pink dust from the attic! Pretty sure it's not legal and my self came down the next day! Darn

PLUS ONE ON "SETTING TOOL".....( AUG 07, 2021 )

The whole entire video is him just babbling and rambling about unnecessary things he does not get to the point but at 6:50 he accidentally sums it up this video could have been a lot shorter than it is because he just goes on and on and just doesn't make himself clear so watch from 6:50 until 7:18 and that's all you need to know so everything before and after is just a bunch of what seems to be hyperactive rambling maybe when he was a kid in school he was in Special Education classes because he seems to lack comprehension skills even when he's the one doing the explaining 🙄🤦🏻‍♂️🤷🏻‍♂️

@FelixBank

5 жыл бұрын

Special education? Ha, no. I'm currently studying for my Engineering Degree (Honours). I guess this is why I don't put out much videos, because, as you have confirmed, I come across badly in this video, and in general as well. But I do have great technical abilities. Shame you have no content to compare mine with. Kinda makes your comment a total waste. Thanks for the time stamps though. Enjoy your day 😎

@bcwindowcleaning7360

5 жыл бұрын

Time is precious Mr engineer thanks for making this video. Could have been edited to these times though.

@hcwong7967

2 жыл бұрын

@@FelixBank Have you got your Honour degree by now?